
At 50 racks the access problem splits into tiers: cabinet doors, interlock doors and perimeter doors, each needing its own authentication strength and audit trail.
This page is a representative typical configuration for a data-center hall of about 50 racks, not a delivered project for a named operator. It shows how security planners usually layer access instead of applying one rule to every door: cabinet doors carry per-cabinet electronic locks with card or PIN readers so a single rack can be opened and audited independently, interlock or mantrap doors control tailgating at the security boundary, and perimeter and mechanical-room doors use conventional readers with request-to-exit. Dual-factor authentication is normally reserved for high-density rows and restricted zones rather than the whole hall. Because cabinet metal and dense rows absorb radio, wireless cabinet locks are zoned with gateways while door controllers are hardwired where power and life-safety design permit. Every layer produces an audit event that must be retained and exported. Quantities, gateway ratios and specifications are planning estimates only; exact quantities and specifications are confirmed per project quotation.
| Site profile | A representative enterprise or colocation hall of roughly 50 racks, split across rows with a controlled security boundary and restricted technical rooms. |
| Openings in scope | Planning estimate of about 50 cabinet doors plus interlock doors, mechanical and electrical rooms, network cross-connect cabinets and a loading path. |
| Credential architecture | Single-factor cards on room doors, dual-factor card plus PIN or biometric on restricted rows, escort rules for visitors and automatic expiry. |
| Software/integration | Central platform with per-cabinet audit, alarm relays to building management or monitoring, retention policy and export formats agreed per project. |
| Network/power | Wireless cabinet locks zoned by measured coverage, hardwired door controllers with local backup, and defined fallback behavior during outages. |
| Compliance evidence | Life-safety release, radio and electrical evidence for named SKUs are provided per RFQ; egress design follows local fire code. |
| Commercial terms | Current MOQ policy, sample terms and lead time are confirmed in writing per quotation; certificates and test reports for named SKUs are provided per RFQ. |
Tier by consequence rather than by convenience. A cabinet door protects one rack and needs fast, audited single-person access; an interlock door protects the whole hall and needs tailgating control; a perimeter door needs normal credentialing with code-compliant egress. Mixing the three under one rule either slows technicians or weakens the boundary.
| Opening group | Typical choice | Scale reasoning at 50 racks |
|---|---|---|
| Server cabinet doors | Electronic cabinet lock with card or PIN reader | Roughly one per rack, giving per-cabinet audit and independent access without a master key. |
| Interlock or mantrap doors | Controller-driven interlock with fail-safe release | Controls tailgating at the security boundary while preserving life-safety release. |
| Mechanical and electrical rooms | Hardwired reader with request-to-exit | Restricted technical spaces stay separate from operational credentials. |
| Network and cross-connect cabinets | Cabinet lock in a separate access group | Network teams are scoped apart from server operations staff. |
| Loading dock and staging | Time-boxed outdoor-rated keypad | Deliveries receive narrow windows instead of permanent access. |
| Visitor and contractor points | Escorted temporary credentials | Third-party access expires automatically at the end of the visit. |
| Evidence level | What this page states |
|---|---|
| L1 authorized named case | A named data-center operator case with identifiable halls requires written authorization. None is published without NDA, so no such case is claimed here. |
| L2 public-reference case | Public references to comparable colocation or enterprise halls may be cited where independently published, without confirming we supplied them. |
| L3 NDA photo or record case | Photos and delivery records for similar 50-rack halls can be shared with qualified buyers under mutual NDA per RFQ. |
| L4 genericized record | Anonymized records keep rack counts, tier architecture and audit logic while removing site and operator identity. |
| L5 representative typical configuration | What is published here is an L5 typical configuration: an illustrative 50-rack plan for budgeting and RFQ discussion, not a statement of a delivered project. Higher levels are provided to qualified buyers under NDA per RFQ. |
This is a planning bill of materials for budgeting, not a quotation. Cabinet-lock counts follow the rack schedule, and controller and gateway quantities follow the door and coverage plan confirmed per project quotation.
| Component | Quantity logic | Notes |
|---|---|---|
| Component | Typical quantity logic | Notes |
| Cabinet electronic locks | Approximately one per rack, counted from the rack schedule | Handle style and locking direction follow cabinet manufacturer data. |
| Door readers and controllers | One per controlled room door and per interlock pair | Hardwired where power and life-safety design allow. |
| Credential cards and fobs | Issued per person and role, never stocked per cabinet | Dual-factor rules decide the reader and keypad mix. |
| Gateways | One per coverage zone where cabinet locks are wireless | Dense metal rows require measured coverage, not assumed reach. |
| Alarm relay modules | One per integrated door or zone | Relay scope is agreed with the facilities and monitoring teams per RFQ. |
| Spare locks and batteries | A small pool for critical rows and swap stock | Service windows are scheduled so no row is left uncovered. |
Re-check the items below when your project is smaller or larger than the representative scale on this page.
| Scale factor | How the configuration changes | What to verify |
|---|---|---|
| Scale factor | Impact on configuration | Planning note |
| Rack density | Per-cabinet access and audit multiply credential points | Plan row zoning before ordering cabinet hardware. |
| Security tiers | Not every door deserves dual authentication | Tier the site instead of applying one rule everywhere. |
| Audit obligations | Event retention and review become formal duties | Agree retention period and export format at design stage. |
| Life-safety code | Fail-safe release and free egress override security logic | Involve the fire and life-safety engineer in release design. |
| Staff and contractor churn | Credential turnover becomes continuous | Automate expiry and revocation rather than manual edits. |
| Uptime expectations | Offline behavior and battery service must be explicit | Document the fallback procedure for every tier. |
Send your rack schedule, door plan and monitoring requirements. We confirm cabinet-lock selection, interlock and release logic, gateway zoning and audit integration; current MOQ policy, sample terms and lead time are confirmed in writing per quotation, and certificates and test reports for named SKUs are provided per RFQ.
Request Similar ConfigurationProject configurationsLast updated: November 1, 2026 · Reviewed by the Smart Lock Factory editorial team