Last updated: October 31, 2026 · Reviewed by export engineering
A sample order is a fit-and-software test on your own door, not a gift from the factory. You pay to learn whether the body clears your stile, whether cards encode, whether the app pairs, and whether the finish matches your existing doors. The three tiers exist because buyers test different things: one model, several models, or a whole room. Pick the tier that answers what a photo cannot.
The tiers differ in quantity and scope, not in quality: every tier ships production units from the same line and BOM.
| Tier | What you get | Best for | What it answers |
|---|---|---|---|
| Tier 1 – Single-model verification | 1-2 pcs of one model, plus an encoder and a card set | Importer or installer validating one SKU | Does the model fit this door, and does issuance work on our equipment? |
| Tier 2 – Multi-model comparison | 3-6 pcs across 2-4 models in one shipment | Brand owner or distributor comparing families | Which model earns its margin and its installer time here? |
| Tier 3 – Project trial pack | 5-10 pcs plus an encoder and cards sized to a real pilot floor | Hotel or multifamily operator running a pilot corridor | Does the desk and corridor routine hold with non-engineer staff? |
These quantities describe typical requests. A tier is a shape of order, not a fixed pack.

A datasheet describes a lock. A sample tells you how the lever feels, how far the handle travels and whether the reader reads a card in the dark. Samples are shipped from the same production line that will build your order.
Sample units are quoted per unit, at the model and configuration you select. Freight is quoted separately: a 2 pcs parcel and a 10 pcs trial pack do not move on the same terms. Any sample credit against a later mass order is stated in the written quotation, with the order value and the condition. If it is not written there, it does not exist.
Ask for four lines in writing: the per-unit price per model code, freight and destination charges, whether a credit applies and at what order value, and the carton packing list. There is no factory-wide fixed sample price and no standing credit percentage; terms follow the model, the quantity and the destination. The quotation desk states all four before you pay.
Match the order to the test, and add the accessory that makes the test valid.
| If you need to test | Order | Also order | Because |
|---|---|---|---|
| Door fit | 1 pc on the exact door | A ruler photo and the measured thickness | Body width, backset and stile decide fit, not the photo. |
| Card issuance | 1 encoder plus a card set | Card stock in the frequency your system uses | Cards fail at issuance more often than locks fail at the reader. |
| App onboarding | 2 pcs for two phones | The gateway or hub if the model is online | Pairing problems show up on the second device. |
| Fingerprint sensor on dry and wet hands | 1-2 pcs of the model | A second user with different skin | Sensor behaviour changes with moisture. |
| Finish against your door colour | 1 pc in the intended finish | A panel sample or a daylight photo | Satin and black read differently under warm hotel lighting. |
| Battery and mechanical override | 1 pc with 4 AA cells fitted | A spare cell set and the override key | Cell change and key override happen under pressure. |
| Network behaviour | 2 pcs of the online or 4G model | A gateway where needed, plus network details | Radio behaviour in a concrete corridor cannot be judged on a desk. |

A sample order is verified against the same checklist the packing team uses. The bench video shows how the units are laid out, measured and tagged before they are boxed, so a mismatch is caught here rather than at your warehouse.
Send these with the order, not after the carton lands. Each one changes a dimension, a handing or a battery choice.
Run these eight checks within 72 hours of delivery, before the carton reaches a shelf or a site. Photograph any failure and keep the sheet with the packing list.
| Check | Method | Pass condition |
|---|---|---|
| 1. Body dimensions | Caliper the escutcheon and body depth | 306 mm x 75 mm x 15 mm on SLK-2020, within tolerance |
| 2. Door compatibility | Offer the mortise to the cut-out | Seats in a door of 38 mm to 55 mm without shims |
| 3. Battery set | Open the cover, reseat the cells | 4 AA cells present, cover flush |
| 4. Mechanical override | Turn the key both ways | Bolt turns without binding |
| 5. Issuance and read | Encode a card, then present it | Opens on the first read, inside 1 second |
| 6. Low-battery alert | Follow the low-cell procedure in the manual | Alert appears while the lock still opens |
| 7. App pairing | Pair the lock on two phones | Both pair, and the second phone opens the lock |
| 8. Finish inspection | Hold the escutcheon in daylight at 30 cm | No scratches, no colour step, no texture defect |
Send the photo and packing list number the same week; verification is faster while the carton is sealed. The model document pack states what the factory holds for that SKU.
Hotel card lock samples for PMS projects
Installer samples: mortise, rim and retrofit kits
Samples matched to the door leaf you actually have
Fire-door hardware sampled with the assembly report
SLK-253 hotel card lock: card, code and swipe
SLK-509 fingerprint and keypad sampleEach step freezes something and leaves something open; knowing which is which prevents rework.
| Item | Quantity | Notes |
|---|---|---|
| Lock body | 1 per lock ordered | Model code on housing and carton label |
| Mortise or latch | 1 per lock | Hotel mortise for SLK-2020; tubular latch where used |
| Screws and strike | 1 set per lock | Wood and machine screws where both apply |
| Mechanical keys | 1 key set per lock | Set size is stated in the model sheet |
| Batteries | 4 AA cells for AA models | May be held back for air freight |
| Manual | 1 per carton | English standard, other languages on request |
| Encoder | 1 per order where ordered | Software build printed on the packing list |
| Cards | Count on the packing list | Frequency and capacity printed on the label |
Enough to settle the decision. One unit answers one door; two across different handing or thickness settle fit. Use the comparison or pilot tier for several models or a full desk routine.
Units are quoted per unit and freight separately. Any credit, and the order value that triggers it, is stated in the written quotation; there is no standing credit percentage.
Yes. Name the consignee and a receiving contact. Shipping to a site speeds up the fit test, so record the inspection within 72 hours.
Preparation depends on the model, transit on the service and destination. The quotation states the shipping method, the transit window and the documents attached. See shipping FAQ.
Yes, where it was ordered as a line item, and its software build is printed on the packing list. A mass order must run the same or a compatible build, confirmed at quotation.
Send the measurements, the ruler photo and the inspection record. Most failures trace to backset, thickness or handing, and the fix is usually another mortise or model in the family. Exchange terms are in the written quotation; installation support covers the inputs that prevent the repeat.
Send the tier, the model codes, the door facts from the checklist and the delivery address. You receive a written quotation with per-unit sample pricing, freight, any credit condition and the carton packing list. Sample terms are confirmed per order; certificates for a named model are supplied on request.
Request a sample quotationRequest the catalog