Smart lock beside floating technical book pages and cards representing a glossary in deep blue
Glossary

Smart lock glossary: access control terms in plain English

Short definitions of the credentials, lock bodies, ratings, standards, connectivity and software terms buyers meet when sourcing smart locks.

Specifications, quotations and compliance documents use a dense vocabulary — mortise, deadbolt, MIFARE, Wiegand, fail-secure, PMS, IP rating — and confusing two terms can mean ordering the wrong lock body. This glossary defines the terms B2B smart lock buyers encounter most, grouped by topic, in one or two sentences each. Related terms link into the technologies, standards, comparisons and door types hubs for deeper reading.

Credentials & verification

What unlocks the door

Access credential — anything presented to prove identity and unlock: a card, PIN code, fingerprint, face or phone key.

Biometric — a physical trait used for verification, most commonly a fingerprint or face; templates are usually stored encrypted on the lock.

Fingerprint recognition — verification against an enrolled fingerprint, typically via a capacitive sensor; fast and requires no carried credential.

3D face recognition — depth-based facial verification with liveness checks, far harder to spoof than a 2D photo.

Palm vein recognition — biometric verification using vein patterns under the skin; contactless and used in high-end commercial access.

RFID — radio-frequency identification; contactless cards or wristbands unlock when held near the reader, typically at 125 kHz or 13.56 MHz.

MIFARE / DESFire — 13.56 MHz contactless card families; DESFire adds stronger encryption for corporate and campus-grade systems.

NFC — near-field communication, a very short-range subset of 13.56 MHz RFID used by phones and some cards.

Temporary PIN code — a time-limited keypad code valid only for a booking, visit or shift window, a core feature for rentals and staff access.

Mechanical override — a physical key cylinder retained on the lock for dead batteries or emergencies.

Lock bodies & hardware

What goes into the door

Mortise lock — a lock whose mechanism sits in a pocket (mortise) cut into the door edge; common in Europe, Asia and premium commercial doors.

Cylindrical lock — a bored-lock style fitting through two circular holes in the door; the predominant commercial form in North America.

Deadbolt — a locking bolt thrown without spring action; ANSI deadbolts are the retrofit standard on many North American entrance doors.

Rim lock — a lock mounted on the inside face of the door rather than within it; common on British and some legacy doors.

Euro-profile cylinder — the standard interchangeable cylinder profile used across most of Europe; smart versions replace just the cylinder.

Smart cylinder — an electronically controlled Euro-profile or compatible cylinder that upgrades an existing mechanical lock with minimal door work.

Electromechanical lock — a lock combining a mechanical lock body with electronic credential control; EN 14846 is the relevant European performance standard.

Spindle — the bar connecting the handle to the latch mechanism; its size and position matter when fitting smart handles.

Hotel encoder — the front-desk device that writes room number and valid stay dates onto a guest key card.

Gateway / hub — a small bridge that lets Bluetooth or Zigbee/Z-Wave locks communicate with the internet for remote management.

Connectivity & software

How the lock communicates and is managed

BLE (Bluetooth Low Energy) — short-range phone-to-lock communication with very low power draw; remote use requires a gateway.

Wi-Fi lock — a lock connecting directly to a Wi-Fi router for remote control, trading higher battery consumption for no extra gateway.

Zigbee / Z-Wave — low-power mesh protocols requiring a building or smart-home hub; favored in integrated residential systems.

Matter / Thread — newer interoperability standards letting devices work across major smart-home ecosystems with less vendor lock-in.

Tuya — a widely used third-party smart-device app and cloud platform adopted by many lock manufacturers; model-dependent.

TTLock — a smart-lock management platform for phone keys, codes and remote access, widely used in rental and apartment scenarios.

PMS — property management system; hotel software handling reservations, rooms and billing, sometimes integrated with the lock system.

Wiegand / OSDP — wired communication standards between readers, controllers and panels in traditional access control installations.

OTA update — over-the-air firmware update delivered to the lock remotely, requiring a connected model and proper update safeguards.

Offline lock — a lock that verifies credentials locally without a network; rights are carried on the card or written into the code itself.

Cloud access control — architecture where permissions, logs and issuing live in a cloud platform rather than only on local controllers.

Ratings, standards & behavior

Marks and terms on specification sheets

ANSI/BHMA grade — North American durability and security grading for door hardware: Grade 1 (heavy commercial), Grade 2 (light commercial/residential), Grade 3 (residential).

IP rating — ingress protection mark against dust and water (e.g. IP54, IP65); the key specification for exposed outdoor gates.

IK rating — mark for resistance to mechanical impact, relevant in rough public or industrial environments.

Fire rating — certification (such as UL 10C or EN 1634 contexts) that hardware is approved for use on fire-rated doors.

CE / FCC / RoHS — respectively the EU conformity mark, US wireless equipment documentation, and the restriction-of-hazardous-substances directive; all are model-specific.

Fail-safe — unlocking when power is cut, prioritizing life-safety egress; typically used on electric strikes in specified paths.

Fail-secure — remaining locked when power is lost, protecting assets; battery smart locks behave this way and keep a mechanical key.

Go deeper

Related knowledge hubs

FAQ

Terminology: common questions

What is the difference between RFID and NFC?

RFID is the broader family of contactless radio identification; NFC is a short-range subset at 13.56 MHz that works at only a few centimeters, typical in phones. Most hotel card locks use RFID cards at 125 kHz or 13.56 MHz rather than phone NFC.

What is a mortise lock in simple terms?

A mortise lock sits inside a pocket cut into the door edge, common in Europe and Asia and on premium commercial doors. Cylindrical locks instead fit through bored holes and are typical in North America. The door types hub shows how to identify what your doors already have.

What do Tuya and TTLock actually do?

They are app and cloud platforms adopted by lock manufacturers to provide phone keys, codes, sharing and remote management. Each lock model runs on one specified platform, so check which before ordering — see the technologies hub.

What IP rating does an outdoor smart lock need?

There is no universal minimum. Fully exposed gates typically call for IP54 or better with weather-sealed bodies, while sheltered doors may accept less. Always describe the exact exposure — rain, sun, roof cover — when requesting outdoor models.

What does fail-secure mean for day-to-day use?

The door stays locked if power is lost, protecting the room. Battery smart locks are fail-secure by design and warn before batteries run out, while a physical override key provides emergency opening.

See a term you do not recognize?

Ask directly — the engineering team will explain it in buyer language and point you to suitable models.

Contact usBuyer resources

Last updated: October 31, 2026 · Reviewed by the Smart Lock Factory editorial team

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp