
Single-sided and double-sided weatherproof models for courtyard gates, patio doors and broken-bridge aluminum entries — plus the one mistake that ruins outdoor installs.
A standard apartment lock on an outdoor patio or courtyard gate fails with water ingress — frozen keypads, dead fingerprint sensors and corroded boards. Exposed doors need purpose-built weatherproof-rated outdoor lock bodies, sealed electronics and protected keypad covers. This single decision determines whether the install lasts years or months.

Slide-cover fingerprint models protect the sensor and keypad when the gate is not in use
Outdoor gates and patio doors are usually broken-bridge aluminum with narrow profiles — a different mounting problem from thick wood doors.
The main pedestrian gate into a residential courtyard, exposed all year.
Aluminum patio doors leading to gardens, pools and outdoor living areas.
Warehouse and compound gates open to weather on both sides.
Side and service gates that take fingerprint or code entry outdoors.
Doors under eaves or canopies suit single-sided weatherproof bodies.
Open gates with no shelter require double-sided weatherproof models.
Real, orderable models — confirm exposure and door thickness for the exact match.
| Location | Exposure | Suggested hardware |
|---|---|---|
| Villa courtyard gate | Rain on outer face, inner sheltered | D15 courtyard or D12 single-sided |
| Covered patio door | Under eaves, partial weather | D12 single-sided weatherproof |
| Open perimeter gate | Both faces fully exposed | D11 double-sided weatherproof |
| Narrow aluminum panel | Direct rain on keypad | D03 slide-cover fingerprint model |
No. Indoor locks are not sealed against rain and will fail with water ingress. Gates and patio doors exposed to the weather must use weatherproof-rated outdoor models such as the D11, D12, D15 or D03.
If only the outer face is exposed — for example under eaves or a porch — a single-sided model like the D12 is enough. If the gate is open to weather on both faces, choose a double-sided D11.
Yes. The outdoor range is built specifically for the narrow profiles of broken-bridge aluminum doors, including slide-cover fingerprint models. Provide the door thickness to confirm the exact body.
The slide cover physically shields the fingerprint sensor and keypad from rain, dust and direct sun when the gate is not in use, which extends sensor life on doors that face the weather directly.
Low-battery warnings give advance notice, and every model includes mechanical backup keys held separately. Some models also allow emergency power contacts from outside.
Exposure level (open or covered), door material and thickness, swing or sliding, and a photo of the gate. Send these with your quote request and we will confirm single- or double-sided.
Send a gate photo with exposure and door thickness — get the correct single- or double-sided weatherproof model.
Request a QuoteWhatsApp a sales engineer