
Where US and export markets prep doors for a deadbolt above the grip, smart deadbolts add credentials without changing the proven bolt.
The deadbolt is the primary security throw on most North American entrance doors: a solid bolt driven into the frame above the spring latch, installed in its own cross-bore with a standard 60 or 70 mm backset. Smart ANSI deadbolts replace that unit directly, adding keypad, card or mobile opening while retaining the hardened bolt, a mechanical key override and compatibility with reinforced box strikes. They are available across BHMA grades, with Grade 1 products intended for commercial and high-security residential entrances. This guide covers prep compatibility, grade meaning, pairing with levers, and the supporting hardware that determines real-world strength.
| Prep | Standard deadbolt cross-bore plus edge bore and frame strike; typically separate from the grip prep. |
| Backset | 60 mm (2-3/8″) or 70 mm (2-3/4″) adjustable latches; longer backsets need specific parts. |
| Strike | A reinforced box strike with long screws into the framing is standard; the bolt throw must seat fully in the keep. |
| BHMA grade | Grade 1 for heavy commercial duty, Grade 2 for residential/light commercial; certificates name the SKU. |
| Override | Mechanical key cylinders are retained for emergency use; restricted keyways available. |
| Weather | Exterior-rated versions carry ingress protection; interior deadbolts should not move outside. |
| Pairing | Installed above a separate grip on the spring latch; the two preps and matched finishes are coordinated per door. |
The lock, the bolt engagement, the strike and the door frame form one assembly; a Grade 1 deadbolt on a short strike plate still fails early.
| Element | Standard choice | Security upgrade |
|---|---|---|
| Lock body | Smart deadbolt matching the prep | BHMA Grade 1 certified assembly |
| Bolt | Standard steel throw | Hardened steel with anti-saw features |
| Strike | Faceplate with wood screws | Box strike with 75 mm+ frame screws |
| Door frame | Softwood jamb | Reinforcement plate / security jamb kit |
| Cylinder | Conventional keyway | Restricted keyway, anti-pick pins |
| Credential | Codes only | Codes + card/mobile + audit export |
On double-cylinder or egress-sensitive doors, local code controls whether key-operated exterior throws are allowed; inside free turn is preserved.
| Opening | Typical door | Lock approach |
|---|---|---|
| House entrance | Solid timber door, standard prep | Smart deadbolt + reinforced box strike |
| Apartment unit | Solid-core fire door where listed | Listed deadbolt matching the fire schedule |
| Rental property | Mixed-age doors, turnover use | Adjustable-backset smart deadbolt with code lapse |
| Small office front | Hollow metal or wood commercial | Grade 1 smart deadbolt or cylindrical lever |
| Storage / back room | Service door with existing deadbolt | Keypad deadbolt with audit and staff codes |
| Glass-lite entry | Door with large glass area | Double-cylinder decisions follow local egress code |
This example illustrates a typical configuration, not a specific customer project. Door stock and strike condition drive the list.
| Component | Typical logic | Notes |
|---|---|---|
| Smart deadbolts | Grade 1 or Grade 2 bodies per opening risk | Backset-adjustable for mixed stock |
| Box strikes | Reinforced strikes with long frame screws | Supplied or specified per door |
| Jamb reinforcement | Repair plates for weak or worn frames | Recommended for exterior rollouts |
| Override cylinders | Mechanical keyways keyed to project logic | Restricted keyway option |
| Sample lot | One per door age/type validated | Bolt engagement and strike checked |
BHMA grades come from certified testing of the complete lock assembly: Grade 1 represents the heaviest duty with the highest cycle counts, strength and security thresholds, Grade 2 covers heavy residential and light commercial use, and Grade 3 is basic residential. A smart deadbolt earns its grade as a listed assembly — electronics, bolt and cylinder together — so the certificate should name the exact SKU rather than the marketing family. Exterior commercial doors, storage rooms and managed rentals typically specify Grade 1; interior and ordinary home doors often use Grade 2. The grade addresses mechanical performance; electronic security, credential policy and the strike installation are separate decisions in the same schedule.
It can reuse a sound strike aligned to the new bolt, but security-focused installs replace the standard faceplate with a reinforced box strike driven by long screws into the wall stud behind the jamb. Many “lock failures” in break-in tests are actually strike and frame failures: short screws in softwood give way long before the bolt does. On steel frames the strike is matched to the existing prep and frame gauge. If the new bolt does not center in the old strike, the door is re-aligned rather than forcing the bolt, which accelerates wear. Strike upgrades are low cost and are included as a line item rather than an optional favor.
Yes through designed paths. Every smart deadbolt we supply retains a mechanical key cylinder, so a verified key opens the door when electronics, batteries or memory are unavailable; many models also expose external power contacts. The inside thumb-turn operates mechanically for egress. Project buyers decide whether the override keyway is standard or restricted and how override keys are stored — in rentals, managers hold them in a controlled cabinet; in homes, the homeowner keeps spares. Audit logs from credential openings remain available after keypad failure events in connected models. These behaviors are covered in the cut sheet and demonstrated during sample installation.
Only deadbolts listed for use on the labeled door assembly are allowed, and free egress requirements constrain how they operate: in most occupancies an occupant inside must leave without a key, which is why interconnected or indicator-type arrangements are common on labeled residential assemblies. Commercial stair and corridor doors more commonly use listed mortise or cylindrical locks rather than separate deadbolts. The UL 10C (US) or EN 1634 (EU) documentation pack is matched to the named model. We do not approve field modifications; the specifier and authority having jurisdiction confirm the configuration, and the install follows the listed schedule exactly.
Battery life is driven by openings per day, motor load from bolt friction, temperature and battery quality; managed rentals commonly plan an annual replacement cycle rather than chasing warnings, while low-use homes may run far longer. Deadbolts that fight a misaligned strike drain batteries quickly, which is why strike adjustment precedes lock installation. Low-battery alerts give weeks of notice, and external power contacts or mechanical keys prevent lockouts. Buying cells in qualified grades and recording change dates per unit turns battery service into a predictable line item. Actual consumption for a specific model and traffic level is provided in the specification rather than as a generic marketing figure.
Send door stock, backset and frame condition — receive a deadbolt and strike schedule with grade evidence and sample terms.
Discuss your project (RFQ)Project configurationsLast updated: October 31, 2026 · Reviewed by the Smart Lock Factory editorial team