Swinging pendulum impact hammer about to strike a rugged access-control keypad mounted on a steel test plate in a bare materials laboratory, frozen motion, neutral even light, no people, no text
Standards

IK ratings: measuring mechanical impact on access keypads and escutcheons

IK codes describe impact energy in joules. They help choose vandal-resistant hardware for public spaces, but a pendulum test is not a forced-entry or prying rating.

The IK code, defined by IEC 62262 (Europe: EN 62262), rates the degree of protection an enclosure provides against external mechanical impacts. The scale runs from IK00 (no protection) through IK01 (0.14 joule) to IK10 (20 joules), delivered by standardized pendulum hammers, spring hammers or free hammers of defined masses and drop heights — IK10, for example, corresponds to a 5 kg mass from 400 mm. Each strike lands on defined points of the enclosure, which must remain safe and functional afterward. For smart locks, IK codes matter on exposed public hardware: gate keypads, parking entrances, rear-of-store doors and transit installations. Specifiers should keep two boundaries in mind: IK measures blunt impact, not lever attacks, drilling or sustained vandalism (those belong to EN 1627 or ANSI/BHMA security tests), and the enclosure may survive while the door or reader behind it does not. This guide explains the scale, selection logic and evidence our factory provides for named SKUs per quotation.

Key facts

IK rating at a glance

StandardIEC 62262 (EN 62262) defines impact-protection codes for electrical enclosures, complementary to the IEC 60529 IP system.
ScaleIK00 is unprotected; IK01 to IK05 cover 0.14 to 0.7 joule; IK06 to IK10 run from 1 to 20 joules.
IK10 meaning20 joules, delivered for example by a 5 kg pendulum falling through 400 mm, striking the enclosure at defined points.
Test methodStandardized pendulum, spring or free hammers strike representative points; the enclosure must remain safe and functional afterward.
Where it mattersUnsupervised outdoor keypads, gate readers, parking and transit hardware, school and nightlife corridors face the highest casual-impact risk.
What it excludesPrying, levering, drilling, tool attacks and repeated sustained beating; forced-entry resistance uses EN 1627 or ANSI/BHMA A156.30-style evidence.
EvidenceAn IEC 62262 test report naming the SKU and code, with the tested mounting and impact points; informal claims such as “vandal proof” are not ratings.
Answer unit

Which IK level fits which public-space risk?

Casual knocks and thrown objects define most real exposure, which pushes unsupervised exterior hardware toward IK08–IK10. Deliberate forced entry is a separate engineering problem entirely.

EnvironmentTypical levelTypical threat
Indoor office, hotel floorIK03 to IK06Bags and accidental contact.
Shared apartment corridorsIK06 to IK08Moving boxes, bicycles, rough handling.
Retail back and service doorsIK08Deliveries, trolleys and cleaning equipment.
Unsupervised exterior gatesIK09 or IK10Kicks, thrown objects and casual vandalism.
Transit and parking sitesIK10 plus mounting substrate designHigh-energy strikes and attempted damage.
Nightlife and school zonesIK10 with tamper alarms and surveillanceSustained abuse beyond what a code alone solves.
Where it applies

Markets, products and evidence

The rated enclosure performs only as well as its mount and the door behind it. High-IK escutcheons are specified together with substrate, fixings and monitoring rather than as a label in isolation.

OpeningTypical doorLock approach
Mounting plateRigid steel backing and anti-rotation fixingsFlex behind the panel absorbs nothing at IK10.
FastenersSecurity screws or concealed boltsExposed standard screws invite deliberate removal.
Reader windowsImpact-rated lens material over the sensorA cracked window disables even an intact body.
Cable routingHarness protected inside the door or frameImpact must not expose or shear wiring.
Tamper signalingSwitch or accelerometer alert to the access platformTurns an impact event into a dispatched response.
Environmental pairingIK plus IP plus corrosion evidencePublic sites face all three simultaneously.
Documentation pack

Documentation pack for an IK-rated smart lock

For named public-space SKUs our factory provides the pack below per quotation, separating genuine enclosure-impact evidence from marketing language and from the different question of attack resistance.

ComponentTypical logicNotes
IEC 62262 test reportStates the IK code, energy and impact points for the SKU.Core evidence for the claim.
Mounting specificationPlate, screws and substrate required to reproduce the test.Critical because field mounting changes results.
Materials descriptionLens, cover and housing materials and thickness.Supports durability expectations under UV and cold.
Tamper-event descriptionHow the electronics report impacts and cover removal.Links hardware to the monitoring platform.
Scope clarificationWritten note that IK is impact, not forced-entry resistance.Helps specifiers add EN 1627 where needed.
Compliance workflow

Vandal-resistance specification workflow

  1. Describe the locationSupervision level, public access, lighting and recorded incident history.
  2. Choose the IK levelWe propose IK-rated SKUs and the matching mount and fasteners.
  3. Check the attack modelWhere forced entry is a risk, add EN 1627 door class or high-security cylinders.
  4. Verify the reportThe IEC 62262 report and mounting spec accompany the quotation.
  5. Add response measuresTamper alerts, cameras and lighting turn hardware survival into managed risk.
FAQ

Buyer questions about IK ratings

What do IK08, IK09 and IK10 actually correspond to in joules?

Under IEC 62262, IK08 is 5 joules, IK09 is 10 joules and IK10 is 20 joules. For scale, the IK10 pendulum is a 5 kg mass dropped through 400 millimeters at the striking point, while mid-scale codes use lighter hammers or shorter drops. The strikes are applied to representative points on the enclosure — faces, corners and weak points defined in the method — and afterwards the housing must remain safe, with no dangerous access to live parts and no loss of required function. For an unsupervised gate keypad, IK10 means it should absorb a strong kick or thrown object without exposing electronics, which is why it dominates exterior public-access specs.

Does an IK10 lock resist a determined intruder with tools?

No, and specifiers should not read it that way. IK tests simulate accidental or casual impact with defined masses; a deliberate attacker with a screwdriver, crowbar, drill or hammer is covered by security standards — European burglary-resistant doorsets under EN 1627 (RC1–RC6 classes), high-security cylinders under EN 1303 or ANSI/BHMA A156.30, and the lock security digits of EN 12209/EN 14846. An IK10 escutcheon can still be levered off a weak substrate or bypassed through the cylinder. High-risk doors therefore combine IK10 hardware with an RC-rated assembly, high-security cylinder, security fixings and, increasingly, tamper alarms.

How is the IK impact test performed?

The enclosure is mounted on a rigid support as defined in IEC 62262, and a pendulum hammer, spring hammer or free-falling mass of the mass and drop height corresponding to the code is released against specified impact points: flat faces, corners, operating elements and weak areas receive the strikes, with the number and distribution set by the standard. After the sequence the enclosure is inspected for access to hazardous parts, loss of ingress protection beyond allowed limits and functional damage. Because mounting stiffness affects results, a device tested on a steel jig can behave differently on a thin sheet-metal door, which is why the report should be read together with the required mounting specification rather than treated as a standalone sticker.

Can a lock carry both an IP and an IK rating?

Yes, and public-space hardware usually needs both; the codes are complementary and defined by sister standards, IEC 60529 for dust and water and IEC 62262 for impact. A typical exterior gate keypad might be specified IP66 IK10: dust-tight and jet-resistant, plus 20-joule impact survival. Each code needs its own test report, and the combined specification should also name the corrosion expectation, because chlorides and cleaning chemicals degrade housings that neither test addresses. In practice the mount, cable gland and cover design that seal water are often the same elements that absorb impact, so well-engineered outdoor platforms tend to achieve the pair together, but the evidence remains separate.

Is there any point rating an indoor smart lock for IK10?

Occasionally, but it is usually wasted cost. IK10 construction means thick housings, rigid mounts and tougher reader windows, which add price, weight and sometimes battery-access friction. Indoor corridors, offices and hotel floors experience bag bumps and accidental contact well below IK06–IK08 territory, and the building’s access control, cameras and staff presence handle deliberate damage better than enclosure mass. The right level follows the site threat model: supervised interiors at moderate IK levels, unsupervised exteriors at IK10, and locations with recorded attacks at IK10 plus monitoring and attack-rated door assemblies. We help map the code to the actual incident profile rather than defaulting every project to the highest number.

Need impact-resistant keypads for a public site?

Share the location and incident history. We quote IK-rated SKUs with the matching mounting specification, IEC 62262 report and tamper-signaling options for unsupervised openings.

Request Spec Sheet + QuoteCertifications overview

Last updated: October 31, 2026 · Reviewed by the Smart Lock Factory editorial team

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp