OEM clamp-on smart lock for frameless glass office doors in a blue-lit showroom
OEM by lock type

OEM glass door locks: clamp-on access without door damage

Smart locks purpose-built for frameless and framed glass doors, branded for office, retail and showroom channels — with the glass thickness and door measurements that make or break the fit.

Glass doors cannot be treated like timber doors. There is no mortise pocket to cut into, drilling tempered glass is usually impossible, and the lock must clamp around the door leaf while leaving the closing hardware and any floor spring operational. OEM glass lock programs are built around clamp-on platforms for frameless tempered glass, plus framed models that fix to a stile, with credential options across RFID card, passcode and fingerprint. The single most important spec is the measured glass thickness and the gap dimensions between leaf and fixed panel — these are checked on the actual door before production quantities are confirmed.

Key facts

OEM glass locks at a glance

Mounting principleClamp-on, no-drill installation for frameless tempered glass; screw-fix options for framed doors with a usable stile
Critical measurementGlass thickness (common 10–12 mm frameless installations, per SKU range), leaf-to-panel gap and swing direction
Credential optionsRFID card, passcode and fingerprint across covered SKUs, with mechanical or power-override where the model provides it
Closing hardwareFitment checked against floor springs and patch fittings; the lock cannot obstruct the closing arc
Typical sitesOffices, meeting rooms, co-working suites, retail entrances and showroom partitions
OEM layerLaser logo, finish (black/silver and supported custom finishes), color box, manual and glass-door install template
Power noteBattery compartments are sized around the clamp body; battery type and emergency power contact are listed per SKU
Answer unit

Frameless clamp-on or framed stile mount?

Mounting follows the door construction. Ordering the clamp model for a framed aluminum door — or the reverse — is the most common fitment error.

DimensionFrameless glassFramed / aluminum stile
Fixing methodClamp plates around glass, no drillingScrews or clamps onto the stile per template
Thickness checkTempered glass thickness in the supported rangeStile width and wall thickness dominate
AestheticsAll-mechanical clamp visible; finish mattersLock reads as hardware on the frame
Credential headCompact reader, keypad or sensor on the clamp bodyReader can mount on the wider stile
Common buyerCo-working, showrooms, glass partitionsShopfronts and framed office entrances
Confirm withGlass thickness and gap photosStile cross-section and door drawings
Fitment workflow

How glass door fit is verified

  1. Door surveyInstaller measures glass thickness, total gap, swing direction, floor spring and patch fitting positions and sends photos.
  2. SKU matchFactory matches the measurements against the clamp range and confirms spacer requirements where the glass is thinner.
  3. Fit sampleA sample lock is fitted to a representative door — the actual opening or a full-size mock-up — before production quantities.
  4. Branded productionLogo, finish and packaging applied to the confirmed SKU, with install templates packed per unit.
FAQ

OEM glass door locks: common questions

Can a smart glass lock be installed without drilling?

On frameless tempered glass, yes — the covered clamp-on platforms secure around the leaf with clamp plates and spacers, which is why glass thickness and gap must match the SKU range. Framed doors normally fix to the stile, and the install template shows what preparation the frame actually needs.

Which glass thicknesses do the clamp models accept?

The supported thickness range differs by clamp SKU, with 10–12 mm frameless glass common in office installations. Rather than quoting a universal figure, the factory confirms compatibility from your measured thickness and supplies spacers where the glass sits at the thinner end of the range.

Do glass locks work with an existing floor spring?

They can, provided the clamp body does not obstruct the closing arc and the floor spring still pulls the door fully closed. Floor spring and patch-fitting positions are part of the door survey, and a fit sample on a representative door verifies operation before volume production.

Which credential is best for glass office doors?

Card systems suit managed offices with staff issuance and meeting-room zones; keypads suit spaces that rotate codes without issuing tokens; fingerprint models suit small teams wanting biometric entry. The RFID and fingerprint OEM pages detail each system.

What MOQ and lead time apply to branded glass locks?

Thresholds follow the SKU and whether finish changes are involved; glass programs are often smaller per shipment than residential container programs. Send measured door details and quantities through the RFQ form and the current MOQ and lead time are confirmed in writing.

Brand a glass-lock range that actually fits

Send glass thickness, gap, swing photos and quantities — receive SKU matching plus written MOQ and lead-time terms.

Request OEM termsOrder a fit sample

Last updated: October 31, 2026 · Reviewed by the Smart Lock Factory editorial team

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp