
A China manufacturer producing no-drill glass door locks for offices, retail fronts and meeting rooms — RFID, keypad and fingerprint modules, gasket-protected clamps sized to real glass thickness, with swing/sliding SKUs and OEM/ODM support.
Tempered glass cannot be drilled after tempering — which is the entire engineering story behind a glass door lock. The product must clamp to the glass with distributed pressure and protective gaskets, survive the door's movement, and meet egress rules for commercial space — all without a single hole in the panel. We manufacture clamp-on smart locks for frameless and semi-framed glass doors in offices, retail storefronts, co-working suites and hospitality amenity areas, with RFID card, keypad and fingerprint modules across different SKUs. The deciding specifications are never decorative: glass thickness range, framed versus frameless top rail, swing versus sliding movement, and the fail-safe/fail-secure behavior required by local egress and fire codes. Each of these is confirmed per SKU against a door survey, with installation templates and spacer sets shipped with the order. Commercial terms and current MOQ are stated in writing per quotation.
| Mounting principle | Mechanical clamp with gaskets and spacer sets; no drilling of tempered panels on covered models — some framed-door SKUs use rail adapters |
| Glass thickness | Supported thickness range is specific to each SKU (common office partitions fall around 10–12 mm, but confirm rather than assume) |
| Door movement | Dedicated SKUs for swing doors and sliding doors; the latching and clamp geometry differs and they are not interchangeable |
| Access modules | RFID card, keypad passcode and fingerprint options across the glass lock range, with mechanical/override provision per model |
| Framed / frameless | Models for frameless tempered doors and models for top-rail framed doors; adapters required where rail geometry differs |
| Egress behavior | Fail-safe versus fail-secure behavior differs by model and must match the local code interpretation for each opening |
| Finish & protection | Brushed, black and PVD-type finishes; gasket material and clamp pressure designed to protect glass edges and faces |
| Files & testing | Model-specific compliance files for covered SKUs and clamp/gasket fit checks on glass jigs — certifications, QC |
Glass lock returns are almost always survey failures, not product failures. Six measurements and one code question settle whether a clamp lock fits and is legal to install; collect them before selecting the SKU.
| Verification point | Why it matters | How to confirm |
|---|---|---|
| Glass thickness | Clamp range is narrow; wrong size means no fit or glass stress | Measure panel thickness at the edge; include any existing film |
| Tempered / laminated | Only tempered-type panels are assumed; laminated or special glass needs review | Check the glass mark/spec from the glazing contractor |
| Frameless vs top rail | Clamp and adapter designs differ between the two constructions | Photograph the head of the opening and rail profile |
| Swing vs sliding | Latch and strike geometry is movement-specific | Observe full travel and note floor springs or tracks |
| Egress / fire code | Locked glass doors on escape routes have fail-mode requirements | Confirm required fail behavior with the local fire/code consultant |
| Closing force | Strong floor-spring closers can overpower small latch bolts | Note closer model/adjustment and test with the sample lock |
Glass is the customer's most expensive component, so clamp pressure distribution and gasket integrity are treated as safety checks: every lock is fit-tested on glass-thickness jigs before packing, with installation templates included to keep installer torque within specification.
Engineered clamp and gasket kits that distribute pressure and protect tempered panels.
Every unit fit-tested on thickness jigs so the customer's glass never becomes the test bench.
Fail-safe and fail-secure options identified per model so code consultants can specify correctly.
Swing-door meeting room suites and entrance partitions delivered with room-labeled kitting.
Storefront glass configurations with staff-controlled access outside trading hours.
Brushed, black and PVD-type finishes with logo and firmware customization layers.
Mechanical variants (spacer geometry, movement type) carry compatibility sign-off; cosmetic layers carry artwork approval. All thresholds confirmed in writing.
| Layer | What changes | Approval needed | Program level |
|---|---|---|---|
| Laser logo | Brand mark on the clamp body | Logo artwork proof | Branded stock |
| Packaging & manual | Branded boxes, illustrated install guides with torque guidance | Dieline and proofs | Branded / private label |
| Firmware defaults | Language, code policy, auto-lock timing | Configuration sheet | OEM |
| Finish option | Brushed, black or PVD-type color runs | Signed finish sample | OEM |
| Spacer / adapter variant | Geometry for non-standard thickness or rail profiles | Glass/rail drawing sign-off | OEM project |
| New tooling / ODM | New clamp body for special glass systems | Design freeze, glass-system validation | ODM |
This example illustrates a typical configuration, not a specific customer project. SKUs and spacers always follow the real glass survey.
| Line | Item | Typical detail |
|---|---|---|
| 1 | Clamp-on glass locks | ~30 units, swing or sliding SKUs matched per opening's movement |
| 2 | Access modules | RFID for meeting rooms, keypad or fingerprint at main entries per the access plan |
| 3 | Spacer & gasket kits | Correct sets for the measured glass thickness, with spare gaskets |
| 4 | Credentials / gateways | Staff cards or codes; gateways only where connected SKUs were selected |
| 5 | Installation materials | Torque-guided install templates, strike parts and per-door labeled kits |
Plan a real fit-out on the project configurations hub.
Each SKU supports a stated glass-thickness range and ships with the matching spacer set. Common office partitions sit around 10–12 mm but ranges differ by model, so measure the actual panel edge and confirm fit at quotation rather than ordering from a nominal figure.
Yes — that is the purpose of the clamp design: covered models require no holes, and installation uses gaskets, spacers and torque-guided installation templates to distribute pressure. Installation should still be carried out by an experienced glazing or hardware installer, since point loading from over-tightening is the main risk to a panel.
No. Latching and clamp geometry differ between swing and sliding movements, and dedicated SKUs exist for each, including sliding-door hook-bolt arrangements on covered models. Record each opening's movement — including floor springs or tracks — during the survey.
Models differ between fail-safe (unlocks on power loss) and fail-secure behavior, and many glass doors sit on escape routes where local code dictates the choice. This must be confirmed with the project's fire or code consultant per opening; we identify the behavior of each SKU so the specification is accurate rather than assumed.
Some SKUs support top-rail framed doors with the appropriate adapter, while others are intended for fully frameless panels. Send photos and the rail profile with your RFQ and engineering confirms compatibility; non-standard rail geometry can also be quoted as a spacer/adapter variant for project orders.
Send glass thickness, framed/frameless type, swing or sliding movement and quantities — receive SKU-level specs, spacer kits and written terms.
Request a quoteOrder fit-test samplesLast updated: October 31, 2026 · Reviewed by the Smart Lock Factory editorial team