
Buyers ask about CE, FCC, RoHS, UKCA and fire evidence on nearly every RFQ; this FAQ explains what the documents mean, how to verify them and what transfers to OEM SKUs.
Compliance questions arrive in almost every smart-lock RFQ, often as a short line: "send CE, FCC and RoHS." Behind it sits a real concern — customs clearance, retailer onboarding, liability and after-sales trust. This FAQ covers CE/RED, FCC, RoHS and UKCA meaning and applicability, how to verify a genuine certificate, whether evidence transfers to custom or private-label SKUs, ANSI/BHMA grades, UL and EN fire-door evidence, and lithium-battery documents such as UN38.3 and MSDS. Answers reflect standard engineering and commercial practice; certificates and test reports for named SKUs are provided per RFQ, and coverage, model lists and validity are confirmed in writing before an order is placed.
CE is the manufacturer's declaration that the product meets the applicable European Union directives. A radio smart lock typically falls under the Radio Equipment Directive (RED) 2014/53/EU, covering radio, EMC and electrical safety, plus RoHS restrictions on hazardous substances and, where the lock connects to the internet, cybersecurity requirements that have applied from August 2025. CE is a self-declaration backed by a technical file, test reports and a Declaration of Conformity; it is not issued by a government. Ask which standards the RED report was tested to, check the model name on the document, and confirm the manufacturer is named as the responsible party.
Colloquially many suppliers call their radio test report a "RED certificate". Formally, RED is the directive; a laboratory tests the lock against harmonised standards such as EN 300 328 or EN 301 893 for the radio, EN 301 489 for EMC and EN IEC 62368-1 for safety, and the manufacturer then signs a Declaration of Conformity and applies CE. A test lab is not certifying the product in the legal sense. For an RFQ, request the test reports and the DoC together, and check that the tested model number matches the exact SKU you will import, including its radio module and firmware generation.
Any electronic lock with a radio module — Bluetooth, Wi-Fi, Zigbee or Sub-GHz — must comply with FCC Part 15 before it is marketed or imported in the USA. The usual route is Certification (FCC ID) for intentional radiators, performed by an accredited laboratory and registered in the FCC system; the ID is printed on the product label. Non-radio electronic parts carry a Supplier's Declaration of Conformity instead. Customs and US retailers routinely ask for the FCC grant, so request the FCC ID, the test report and label artwork for the named SKU, and verify the ID online in the FCC equipment-authorization database.
RoHS restricts ten substances — lead, mercury, cadmium, hexavalent chromium and certain flame retardants among them — in electrical and electronic equipment, and a smart lock is EEE. REACH is a much broader chemicals regulation covering Substances of Very High Concern in any article, including plastics and coatings. Evidence is usually an RoHS test report or supplier declaration plus a REACH SVHC declaration refreshed as the candidate list grows. European buyers also need WEEE registration handled by the importer. Ask for reports citing the current RoHS recast version and a dated REACH statement rather than a generic "compliant" screenshot.
UKCA is the UK conformity mark created after Brexit, parallel in structure to CE: radio locks fall under the UK Radio Equipment Regulations, with designated standards mirroring the EN family. In practice the UK government has repeatedly extended acceptance of CE marking for most goods, including radio equipment placed on the GB market, but importers must still meet UK technical requirements, correct labelling and importer obligations; Northern Ireland follows separate CE/UKNI rules. Confirm the current accepted route at shipment, request UK-compatible declarations, and never assume a document labelled UKCA exists unless a designated-standard test report backs it.
ANSI/BHMA grades classify the mechanical durability and security of locks sold mainly in North America. Grade 1 is the highest duty, tested for the most cycles and strongest loads; Grade 2 is the common commercial and light-contract level; Grade 3 is standard residential. Grading covers cycles, latch strength, finish and similar hardware attributes — it does not by itself assess cybersecurity, and an electrified lock is tested under standards such as ANSI/BHMA A156.25 for electrified locking plus the relevant A156.2, A156.13 or A156.36 standard. Ask for the exact A156 standard, grade and test report rather than accepting "Grade 1" as a slogan.
Fire doors are certified as complete assemblies, and only hardware listed in that assembly may be installed. In the USA, UL 10C covers positive-pressure fire testing of door assemblies and the lock or exit hardware must carry a matching listing; in Europe, doors are tested to EN 1634-1 and hardware to product standards such as EN 12209 for mechanical locks or EN 14846 for electromechanical locks. A general smart-lock certificate never substitutes for the door listing. On labeled openings, request the hardware listing cross-reference for the exact SKU and confirm installation follows the listing; retrofitting unlisted electronics can void the door's fire rating.
No. A test report records what a laboratory measured on a submitted sample, against a named standard, on a certain date; it proves evidence but, on its own, does not always authorize a mark. A certificate or grant is issued or registered through a conformity scheme — for example an FCC grant tied to an FCC ID, or a notified-body certificate where one is used. The manufacturer then signs a Declaration of Conformity accepting legal responsibility. For an RFQ, collect the test report, any certificate or grant, and the DoC as a package, and confirm all three reference the same model, radio module and manufacturer name.
Certificates are tied to the tested product identity: manufacturer name, model number, radio module and sometimes firmware. A cosmetic private-label run that changes only logos, packaging and finish usually keeps the same technical file, and the Declaration of Conformity can reference the original tested model with the brand mapping documented. A new model number, changed enclosure, different radio module, added circuits or altered firmware can invalidate the report and require delta or full retesting. The responsible party for CE and UK obligations also matters. Which SKUs the existing evidence covers and what a new brand name requires are confirmed in writing per RFQ.
Start with the document itself: check model number, manufacturer name, laboratory name, test standards, issue date and any certificate ID, then match the radio module. FCC IDs can be looked up directly in the FCC equipment-authorization database; notified-body numbers are verifiable on the NANDO information system; accredited lab reports can be confirmed through the lab's certificate-validation service or an email to its report desk. Ask for full reports, not just covers, and compare the internal photos and test setup with the product you received. Borrowed or photoshopped certificates are common, so verification is a normal part of buyer due diligence, not an insult.
A practical RFQ set for a radio smart lock includes: the RED or equivalent radio, EMC and safety test reports plus the Declaration of Conformity for CE markets; the FCC grant with FCC ID for the USA; RoHS and dated REACH declarations; UKCA or UK-accepted-route documents for Britain; ANSI/BHMA reports for North American hardware claims; fire-listing cross-references if the lock targets labeled doors; and the lithium-battery transport documents described later in this FAQ. Request documents for the exact named SKUs, in full PDF rather than screenshots. Certificates and test reports for named SKUs are provided per RFQ; documents still pending on a model in development are identified as such rather than promised verbally.
Battery-powered smart locks usually contain lithium metal or lithium-ion cells, classified under the UN Model Regulations — typically UN3091 for lithium-ion batteries packed with or contained in equipment, or UN3090 when shipped separately. Required evidence includes a UN38.3 test summary for the cell and battery, an MSDS (SDS) prepared for transport, and a shipper's declaration plus correct marks and labels for the chosen mode; Section II exceptions for small quantities remove some of the declaration burden but not the UN38.3 basis. Battery watt-hour or lithium content, configuration and packaging rules change by mode and carrier, so the applicable documents are confirmed per SKU and per routing in writing.
Sometimes, but only where the models genuinely share the compliance-critical design: the same radio module and antenna, PCB layout, power supply, enclosure material and firmware behavior. A test report can list family models or a parent model with variants, and the technical file must explain what differs — for example finish or keypad layout. Different radio chips, added cameras or larger battery packs generally need their own test campaign. A certificate that lists dozens of unrelated models under one brand name is a warning sign. The exact model list covered by each document is confirmed in writing before order, not inferred from a cover page.
Well-run factories control component changes through an engineering-change process: safety-critical and radio-critical parts — radio modules, power circuits, batteries and main enclosures — are not silently substituted. If a change is necessary, the factory assesses whether existing reports remain valid, performs delta retesting when required and updates the technical file before the revised unit ships. As a buyer, add a clause requiring written notice and, where needed, new evidence for any change affecting compliance, and compare production units against the approved sample during inspection. Component-consistency commitments for named SKUs are confirmed in writing per quotation.
For schemes that allow registration to a brand owner or importer — FCC certification is a typical example — a new applicant can file for its own FCC ID, using test data only with the original holder's authorization and often a fresh filing. CE marking is a declaration by whoever places the product on the EU market: an importer or own-brander can declare conformity, but it inherits the technical-file obligations and needs access to the underlying reports. Asking for documents "in your name" without tested samples is not legitimate and creates liability for you. Ownership, data-use authorization and responsible-party arrangements are settled in writing before tooling.
Keep a per-SKU compliance folder: full test reports, certificates or grants, the Declaration of Conformity, label artwork showing required marks and IDs (such as the FCC ID and WEEE symbol), battery UN38.3 summaries and SDS, user manuals with warnings in the local language, and the technical-file index for CE. Retailers and marketplaces may add their own demands, such as test-lab accreditation details or a Responsible Person in the EU and UK. Documents should be stored for the product's market life plus the retention period the regulation requires, so a customs query years after shipment can be answered from records rather than from a former salesperson's chat history.
Send your target markets and model list. We share full reports and declarations for named SKUs per RFQ, explain OEM coverage honestly, and confirm current MOQ policy, sample terms and lead time in writing per quotation.
Ask Our EngineersRequest a QuoteLast updated: November 1, 2026 · Answers reviewed by the Smart Lock Factory engineering team