Smart lock radio circuit board with small antenna placed inside a dark RF anechoic test chamber lined with absorbing foam cones, subtle teal instrument light, no people, no text
Standards

FCC certification for smart locks: the radio rules behind every US shipment

Any smart lock sold in the United States contains a digital device under FCC rules. Wireless models need certification and an FCC ID; importers carry the compliance duty.

The US Federal Communications Commission regulates electronic devices under Title 47 CFR Part 15. A smart lock with no radio is an unintentional digital device authorized through the Supplier’s Declaration of Conformity (SDoC) against Part 15 Subpart B limits. Once a lock intentionally transmits — Bluetooth, Wi-Fi, Zigbee, Z-Wave or proprietary Sub-GHz — it becomes an intentional radiator requiring Certification under the relevant technical part (for example Section 15.247 for digital modulation in the 2.4 GHz band, 15.231 for periodic Sub-GHz devices or 15.407 for some 5 GHz operation), with testing by an FCC-recognized accredited laboratory, a grant issued through a Telecommunication Certification Body, and a unique FCC ID on the label. User manuals must carry the Part 15 interference statements, and modular transmitters carry conditions about antennas and integration. This guide explains how smart lock importers verify FCC compliance and what our factory supplies for named SKUs per quotation.

Key facts

FCC compliance at a glance

Legal basis47 CFR Part 15 governs radio frequency devices; the US importer or domestic manufacturer is responsible for compliance.
Unintentional devicesNon-radio electronics follow Subpart B emission limits via the Supplier’s Declaration of Conformity (SDoC).
Intentional radiatorsWireless locks require Certification with laboratory testing, a TCB grant and an FCC ID on the device label.
Common sections2.4 GHz digital radios use Section 15.247; periodic Sub-GHz devices often use 15.231; 5 GHz work references 15.407.
FCC ID formatGrant code plus product code, searchable in the FCC Equipment Authorization database; the label must match the shipped device.
ModulesCertified modules carry integration conditions: fixed antenna type, separation rules, labeling and Part 15 user notice text.
EvidenceGrant of certification, test reports, SDoC where applicable, internal photos and letters of modular authorization, all for the exact SKU.
Answer unit

SDoC or Certification: which authorization does each lock need?

The presence of an intentional transmitter is the dividing line. Everything with a radio needs Certification and an FCC ID; purely wired or non-radio electronics use the supplier declaration route.

Device typeAuthorization routeDeliverable
Non-radio electronic lockSDoC, Subpart B emissionsSupplier declaration plus test support.
Bluetooth lockCertification, commonly 15.247FCC ID grant and Part 15 manual text.
Wi-Fi lockCertification, 15.247 and 15.407 as applicableGrant covering every band enabled.
Zigbee / Thread lockCertification under 15.247 for 2.4 GHzGrant plus module integration letter.
Sub-GHz proprietary linkCertification, often 15.231 periodic operationReports on duty cycle and field strength.
Host with certified moduleModule grant plus host verificationLabeling, antenna and co-location conditions met.
Where it applies

Markets, products and evidence

FCC obligations continue after certification: labels, manual notices, import records and configuration control. The importer is the party Customs and the FCC can contact, so the document pack should be complete before the goods sail.

OpeningTypical doorLock approach
Direct US importGrant and importer of record settled before shipmentCustoms can request equipment-authority evidence.
Amazon and retail listingsFCC ID or SDoC documentation ready for platform reviewNon-compliant listings are removed quickly.
Certified module designIntegration conditions reviewed in the finished lockAntenna and co-location rules are the usual pitfalls.
Firmware updatesRF parameters stay inside the granted configurationUpdates must not change power, duty or channels.
LabelingFCC ID on the device and Part 15 statements in the manualE-label options exist for devices without fixed space.
Canada and other marketsISED certification mirrors FCC for most 2.4 GHz modulesOne radio design can carry FCC and ISED evidence together.
Documentation pack

Documentation pack for FCC compliance

For named wireless SKUs our factory supplies the pack below per quotation, enabling the US importer to place goods on the market with the authorization trail ready for enforcement or retail review.

ComponentTypical logicNotes
Grant of certificationTCB-issued grant naming the FCC ID and technical rules.The primary document Customs or platforms request.
Test reportsConducted and radiated emissions and band-specific results.Must reflect the final production configuration.
Modular authorization letterWhen a certified module is used, permission for host integration.States antenna and labeling conditions.
Label artwork and IDFCC ID placement and Part 15 user-notice text.Checked before packaging print runs.
SDoC and internal recordsFor non-radio parts and supporting host equipment.Held by the importer as part of compliance records.
Compliance workflow

FCC compliance workflow for US imports

  1. Classify the radioIdentify technologies and bands the lock enables in each region SKU.
  2. Confirm the authorizationWe provide certification grants for intentional transmitters and SDoC support.
  3. Check integrationModule antennas, labeling and co-location are verified in the finished lock.
  4. Prepare import recordsThe US importer holds the grant, reports and letters before the vessel arrives.
  5. Control changesModule, antenna and RF firmware changes trigger re-assessment before shipping.
FAQ

Buyer questions about FCC certification

Does a Bluetooth smart lock need an FCC ID?

Yes. A Bluetooth lock is an intentional radiator under 47 CFR Part 15 and must be authorized through Certification, which ends in a grant issued by a Telecommunication Certification Body and a unique FCC ID on the label, typically under Section 15.247 for 2.4 GHz digital modulation systems. Using a pre-certified Bluetooth module simplifies testing but does not remove the finished-device grant unless the integration follows every modular condition precisely. The FCC ID can be checked publicly in the FCC Equipment Authorization database, and importers should verify that the label ID matches the product, grantee and technical configuration in the shipment.

What is SDoC and when is it enough?

The Supplier’s Declaration of Conformity is the authorization route for unintentional digital devices — equipment that uses digital electronics but contains no radio transmitter, under Part 15 Subpart B. The responsible party keeps a test-based compliance record and issues a declaration; no FCC ID is created. For smart locks this applies only to genuinely non-wireless SKUs such as wired keypads with no radio subsystem. The moment a Bluetooth, Wi-Fi or Sub-GHz radio is present, Certification and an FCC ID are required, and selling that SKU under an SDoC alone is a violation regardless of how thoroughly the non-radio parts were tested.

Can we use the module maker’s FCC ID for our finished lock?

Only under the conditions of a modular grant. A certified module may be installed in a host without recertifying the radio when it uses the approved antenna type, meets separation and co-location restrictions, carries the required labeling and includes the Part 15 statements in the host manual; the responsible party typically also needs a letter authorizing integration. If the finished lock uses a different antenna, encloses the module in metal, places radios too close together or markets it under conditions the grant does not cover, a Class II permissive change or a new certification is needed. Our SKU files state which path each lock uses.

What Part 15 text must appear in the user manual?

Every Part 15 device requires statements warning that the device may not cause harmful interference, must accept any interference received, and that changes or modifications not expressly approved could void the user’s authority to operate the equipment. Certified transmitters additionally reference the grant, carry the FCC ID and include any module-required notices, such as statements about indoor-only use for certain bands or co-location restrictions. The exact wording is provided with the test reports and should be printed verbatim in the English manual; market surveillance and retail compliance teams check for it because its absence is an easy violation to spot.

Who is legally responsible if the lock fails an FCC check?

The responsible party is the manufacturer if based in the US, otherwise the US importer of record, with retailers and distributors also expected to handle only compliant equipment. Enforcement ranges from marketing-stop letters and product holds at the border to equipment recalls and fines, and market surveillance can open from a competitor complaint or random sampling. Practically, importers protect themselves by keeping the grant, reports, internal photos, integration letters and SDoC for each SKU before the goods arrive, and by requiring the factory to notify them of module or antenna changes. We provide change notifications and refreshed documents with the affected shipment.

Need FCC grant details before a US shipment?

Ask for the FCC ID with your RFQ. We supply the grant, test reports and integration conditions for each named wireless SKU and flag any change that affects the authorization.

Request Spec Sheet + QuoteCertifications overview

Last updated: October 31, 2026 · Reviewed by the Smart Lock Factory editorial team

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp