Long contemporary hotel corridor with rows of identical dark-wood guest-room doors fitted with slim electronic card locks, recessed warm lighting and patterned carpet, no people, no text, no signage, no logos
Project configurations

A typical full-service 200-room hotel access design

Two hundred rooms push access toward a mixed online architecture with redundant issuance, lift floor control and zone-based staff management.

This page presents a representative typical configuration for a full-service hotel of approximately 200 guest rooms, usually a branded property across several floors. At this scale the guest-room population still runs predominantly on MIFARE card locks — offline models keep room-side installation simple, while online or hub-connected locks are selected on floors or wings where the operator wants live room status and instant revocation. The front office typically needs two or more encoder stations sharing one PMS gateway, so check-in, group arrivals and cashier desks work in parallel; lift floor control restricts guest cards to their occupied floors, and staff access is divided into housekeeping, engineering, F&B and security zones with schedules and audits. Common doors, meeting rooms, executive lounges and back-of-house corridors sit on the online layer. These are planning estimates only; the exact quantities and specifications are confirmed per project quotation once door schedules, PMS version and brand standards are reviewed.

Key facts

Key facts: 200-room hotel configuration

Site profilePlanning estimate of one full-service hotel with around 200 guest rooms, multiple floors, meeting space and a sizeable back-of-house area; actual counts vary.
Openings in scopeEstimate about 200 guest-room locks plus common, meeting, lounge, service, storage and stair openings across the building, confirmed by survey.
Credential architecturePredominantly MIFARE card locks, offline or hub-online by floor, with multi-zone staff cards and optional mobile keys for loyalty or long-stay guests.
Software/integrationMulti-station encoder software linked to the named PMS through a gateway; one online console manages staff zones, audits and lift floors.
Network/powerBattery room locks with central low-battery reporting; radio gateways sized by a floor-by-floor coverage survey; audited mechanical override per lock.
Compliance evidenceLabeled fire and stair doors retain listed hardware and one-motion egress; certificates and test reports for named SKUs are provided per RFQ.
Commercial termsCurrent MOQ policy, sample terms and lead time are confirmed in writing per quotation; warranty terms are confirmed in writing per quotation.
Answer unit

How access is configured at this scale

At 200 rooms the deciding factor is operational density: group arrivals, parallel shifts and many staff zones. The design pairs the proven offline guest-lock base with a structured online layer, redundant issuance and lift control rather than adding features door by door.

Opening groupConfiguration choiceWhy at this scale
Guest-room doorsOffline or hub-online MIFARE hotel locks by floorA uniform lock generation supports about 200 doors; online floors give live status where the brand requires it.
Front-office issuanceMultiple networked encoder stationsParallel stations absorb group arrivals without slowing check-in or cashier operations.
Lift lobbies and cabsFloor-control readers and lift interfaceGuest cards reach only occupied floors; staff cards follow zone permissions across levels.
Meeting rooms and loungesOnline readers with scheduled open periodsBanqueting and executive floors need timed unlock modes and event-level audit trails.
Back-of-house zonesZoned online locks for housekeeping and engineeringDepartmental schedules and separation of duties become practical with zone-based credentials.
Stair and emergency doorsListed exit hardware integrated with the planHigh-rise egress paths need listed assemblies and coordinated fire-system behavior.
Evidence level

What evidence backs this configuration page

Evidence levelWhat this page states
L1 - Authorized named case studyAn L1 record names the hotel or brand, the owner and the delivered scope under written authorization. We do not currently publish an L1 record for a 200-room hotel project.
L2 - Verifiable public referenceAn L2 record ties the project to an independently checkable public source such as an opening announcement or tender award. Nothing of this kind is claimed on this page.
L3 - Photos and records under NDAL3 evidence includes dated installation photographs, shipment documents and commissioning records shared under NDA. Qualified buyers may request it during an RFQ.
L4 - Genericized project recordAn L4 record describes a comparable property without names or location, keeping scale, lock architecture, integration scope and rollout lessons available for discussion.
L5 - Representative typical configurationThis page is an L5 representative typical configuration for estimation and dialogue, not a delivered project. Higher evidence levels are provided to qualified buyers under NDA per RFQ.
Planning BOM

Indicative bill of materials for this scale

This is a planning BOM for early budgeting, not a quote. Quantities are expressed per opening and per zone; the confirmed bill follows a surveyed door schedule and the operator’s brand standard.

ComponentQuantity logicNotes
Guest-room electronic locksOne per guest room, plus a project spare allowanceUniform generation across all floors; online modules only where the brand standard requires.
Encoder stationsOne per active reception work pointTypically several stations for arrivals, cashier and group desks, sharing one database.
Key cardsA cards-per-room multiple plus event and loss stockGroup business and conference guests raise peak card demand above simple occupancy.
Radio gatewaysAllocated from floor coverage surveysCounted per corridor or wing geometry, not as a fixed percentage of rooms.
Lift control interfacesOne per controlled lift or controller groupCompatibility, cabling and floor mapping are agreed with the lift contractor.
Common and staff locksetsOne per managed non-guest openingIncludes meeting, lounge, service and storage doors identified in the opening schedule.
Scale logic

The 200-room design sits between simple boutique operations and campus-style resorts. The scale factors below show what to revisit when comparing nearby property sizes.

Re-check the items below when your project is smaller or larger than the representative scale on this page.

Scale factorHow the configuration changesWhat to verify
Guest-room populationToward 100 rooms, issuance and online floors can shrink; toward 500, redundancy and multi-server planning grow.Re-size encoder stations and online coverage from projected occupancy peaks.
Staff and department zonesLarger hotels split more departments and need finer schedules and audit separation.Define the staff hierarchy before lock configuration begins.
Lift and tower layoutTaller buildings add cab readers and floor logic; low-rise resorts use gateways across blocks instead.Map floors, wings and lift groups before pricing interfaces.
PMS and group trafficHigh group-arrival volume demands tested PMS throughput and backup encoding.Specify PMS version and failover procedure in the RFQ.
Network coverageMore floors mean more gateways, survey time and commissioning effort.Budget a documented radio survey rather than guessing gateway counts.
Spares and serviceA 200-room estate needs a managed spare stock and response commitments.Confirm spares holding and warranty terms in writing per quotation.
Delivery workflow

Five steps from survey to full-property handover

  1. Survey all openingsDocument guest, common, meeting, service and stair doors, plus lift groups, fire labels and network conditions per floor.
  2. Design the architectureAgree the offline and online split, staff zones, PMS scope, lift floor logic and gateway plan.
  3. Sample and evidence reviewPilot locks on representative floors; named-SKU certificates and test reports are provided per RFQ.
  4. Phase the rolloutInstall by floor or wing, keeping the hotel operational, and verify encoding and audits at each phase.
  5. Train and hand overTrain reception teams and maintenance, register keys and spares, and confirm warranty terms in writing per quotation.

Request a similar configuration for a 200-room hotel

Share your door schedule, PMS version and brand standard with a Request Similar Configuration note. We confirm the online and offline mix, staff zones and lift scope; current MOQ policy, sample terms and lead time are confirmed in writing per quotation, and certificates and test reports for named SKUs are provided per RFQ.

Request Similar ConfigurationProject configurations

Last updated: November 1, 2026 · Reviewed by the Smart Lock Factory editorial team

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp