Modern multifamily residential lobby with a single entrance door fitted with a slim reader, polished concrete floor, mail and parcel cabinets behind, warm pendant lights, no people, no text, no signage, no logos
Project configurations

A typical 300-unit multifamily access design

Three hundred units across several buildings turn credential turnover, shared-door control and central reporting into the core planning problems.

This page sets out a representative typical configuration for a multifamily rental or condominium asset of approximately 300 units, typically a pair of mid-rise buildings or a garden-style community with shared amenities. Three opening populations matter. Resident doors number around 300, and each needs a credential issued at lease signing, replaced on request and revoked the moment a lease ends; mobile keys, PIN codes and cards are usually mixed so residents have a choice while management keeps a working fallback. Shared doors include building entrances, lobby, package room, bike room, gym, roof terrace, parking and bin stores, and these belong on hardwired online readers with schedules. Service doors cover plant rooms, risers, storage and roof access, held by management and vendor credentials with dated windows instead of circulating keys. The cloud platform carries the unit directory, role templates, audit logs and optional links to property-management software, while offline unit locks keep apartments working when a gateway or network link fails. Counts, lock generations, controller placement and platform scope on this page are planning estimates; confirmed quantities and specifications are provided per project quotation after drawings and the leasing workflow are reviewed.

Key facts

Key facts: 300-unit multifamily configuration

Site profilePlanning estimate of one multifamily community with roughly 300 units across two to four buildings, shared amenities and an on-site or regional management team.
Openings in scopeEstimate around 300 unit doors plus building entrances, package, bike, amenity, parking, service, stair and roof openings, finalized from the door schedule.
Credential architectureResident mobile key, PIN or card on unit doors; dated vendor codes for maintenance and viewings; scoped staff roles for management, leasing and cleaning.
Software/integrationCloud platform with unit directory, role templates, instant revocation, audit logs and optional links to property-management or accounting software.
Network/powerBattery unit locks with low-battery reporting; hardwired or PoE readers and controllers on shared doors; mechanical override retained on every lock.
Compliance evidenceFire doors keep listed hardware and free egress, and certificates and test reports for named SKUs are provided per RFQ.
Commercial termsCurrent MOQ policy, sample terms and lead time are confirmed in writing per quotation; warranty terms are confirmed in writing per quotation.
Answer unit

How access is configured at this scale

At 300 units the daily work is turnover: credentials created at signing, paused for arrears, restored on renewal and closed at move-out. The design therefore centralizes issuance and revocation on one platform, keeps unit doors offline for resilience, and puts every shared entrance on hardwired online control with an audit trail.

Opening groupConfiguration choiceWhy at this scale
Unit entrance doorsBattery smart locks with mobile, PIN and card optionsOffline operation keeps residents inside during network outages while the platform still issues and revokes credentials centrally.
Building entrances and lobbyOnline readers with door controllers and intercomEvery building needs its own monitored entrance point, all reporting to one property console rather than separate systems.
Amenity doorsOnline readers on schedules and resident groupsGym, roof terrace and lounge access follows amenity rules and building-specific hours without staff presence.
Package and bike roomsOnline readers with delivery and resident rolesParcel handling needs courier entry windows plus resident access, and both should be logged.
Maintenance and plant roomsScoped online locks with dated vendor windowsVendors receive short-lived codes, which avoids key handovers across a multi-building site.
Stair, roof and service doorsListed exit hardware with controlled outer sideFree egress is preserved while cross-building and roof access stays with facilities staff.
Evidence level

What evidence backs this configuration page

Evidence levelWhat this page states
L1 - Authorized named case studyAn L1 record names the asset, its owner or manager and the installed scope, and is published only with signed written authorization. We do not currently publish an L1 record for a 300-unit multifamily project.
L2 - Verifiable public referenceAn L2 record would link to an independently checkable public source such as an owner announcement or planning record. No such reference is offered for this page.
L3 - Photos and records under NDAL3 material covers installation photographs, device schedules and turnover records shared under a signed non-disclosure agreement; qualified buyers may request comparable material during an RFQ.
L4 - Genericized project recordAn L4 record keeps the scale, building mix, common-door list and operating lessons of a comparable asset while removing names, addresses and identifying features.
L5 - Representative typical configurationThis page publishes an L5 representative typical configuration for planning discussion. It is not a delivered project record; L1 to L4 evidence for comparable scopes is provided to qualified buyers under NDA per RFQ.
Planning BOM

Indicative bill of materials for this scale

The BOM below is a planning BOM for budgeting and scope discussion, not a quotation. Unit counts, shared doors and controller positions follow per-opening logic and remain project-specific until drawings are reviewed.

ComponentQuantity logicNotes
Unit smart locksOne per unit, plus a project spare allowanceOne credential mix across all buildings limits SKU spread, spare parts and training load.
Common-door readersOne per controlled shared openingEntrances, amenities, package and bike rooms each need their own reader point.
Door controllers and powerOne per door or paired doors per specificationPoE availability and wiring routes are checked against the electrical drawings per building.
Gateways and network equipmentAllocated per building from coverage surveysRadio coverage differs by construction type, so gateway counts are surveyed rather than estimated from unit count.
Cloud platform and credentialsPer-portfolio tenancy with unit and role recordsResident capacity, role depth and data retention are confirmed for the named platform.
Intercom and lobby stationsPer entrance point as designedAudio or video choice depends on concierge staffing and delivery volume.
Override cylinders and key stockOne override path per lock, controlled stockMechanical entry stays audited and held by management rather than distributed to residents.
Scale logic

Three hundred units sits between a single small building and an institutional portfolio. The notes below show which assumptions change when a project is smaller, larger or spread across more buildings.

Re-check the items below when your project is smaller or larger than the representative scale on this page.

Scale factorHow the configuration changesWhat to verify
Unit countBelow about 150 units a simpler operator app is often enough; above 500, portfolio grouping and role depth become necessary.Check platform limits before standardizing across an entire portfolio.
Building count and layoutMore buildings add entrances, controllers, gateways and radio survey work proportionally.Map every building separately; unit count alone hides this cost.
Turnover and vacancyHigh-turnover markets lean on dated codes, self-tour access and rapid revocation.Tune credential types to the leasing process rather than to hardware price alone.
Common-door densityAmenity-rich communities add readers, schedules and intercoms beyond the unit count.List every shared and service door during early budgeting.
Construction and retrofitNew builds can plan cabling and PoE; retrofits may favor wireless common doors where routes are hard.Validate cabling paths before fixing the controller architecture.
Operating modelOn-site teams use staff badges; regional managers rely on mobile admin and vendor codes.Define who issues, suspends and revokes credentials in daily operations.
Portfolio growthOwners planning more assets should choose a multi-site platform from the start.Confirm cross-site roles and reporting before the first installation.
Delivery workflow

Five steps to a 300-unit rollout

  1. Survey units and shared doorsRecord every unit and shared opening, fire labels, frame types, power routes and network points building by building.
  2. Design roles and workflowsAgree resident credentials, staff roles, vendor windows, amenity rules and the property-management interface.
  3. Sample and evidencePilot a stack of units and one entrance; certificates and test reports for named SKUs are provided per RFQ.
  4. Install and enroll by buildingFit hardware building by building, enroll residents in batches and verify revocation and audit reporting at each stage.
  5. Train and hand overTrain leasing, facilities and after-hours teams, document override keys and confirm warranty terms in writing per quotation.

Request a similar configuration for 300 multifamily units

Send unit and building counts, shared-door drawings and your leasing workflow with a Request Similar Configuration note. We confirm lock mix, controller and platform scope, and access rules for amenities and vendors; current MOQ policy, sample terms and lead time are confirmed in writing per quotation, and certificates and test reports for named SKUs are provided per RFQ.

Request Similar ConfigurationProject configurations

Last updated: November 1, 2026 · Reviewed by the Smart Lock Factory editorial team

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp