Compact boutique-hotel corridor with brushed-nickel electronic card locks on identical light-timber guest-room doors, soft even ceiling light, neutral carpet, no people, no text, no signage, no logos
Project configurations

A typical 50-room boutique or midscale hotel access design

At fifty rooms the front desk can still run a proven offline card system, while common doors and staff areas benefit from a small online layer.

This page is a representative typical configuration for a hotel of approximately 50 guest rooms, the scale of a boutique property or a small midscale new build. At this size a proven offline MIFARE card system handles the guest-room population: an encoder at the front desk writes room number and valid dates onto each key card at check-in, cards stop working at departure, and housekeeping carries staff cards on a simple master hierarchy. Common openings — main entrance, back-of-house door, staff room and one or two amenity rooms — are often placed on a small online layer for schedules, remote audits and immediate revocation, and a single lift can take floor-control readers when the property occupies several floors. Door-by-door counts, lock models, card format, PMS interface scope and gateway placement remain planning estimates on this page; the exact quantities and specifications are confirmed per project quotation after a door schedule and brand standard are reviewed.

Key facts

Key facts: 50-room hotel configuration

Site profilePlanning estimate of one boutique or midscale hotel with roughly 50 guest rooms, a front desk and a small back-of-house zone; actual room and floor counts vary per property.
Openings in scopeEstimate around 50 guest-room locks plus a planning allowance for entrance, staff, amenity, storage and stair doors; the final opening schedule is surveyed per project.
Credential architectureOffline MIFARE cards for guests with front-desk encoding, a limited staff master hierarchy and optional dated mobile or PIN credentials for late arrivals.
Software/integrationEncoder software at reception with an optional PMS gateway; common-door readers on a small online console. PMS names and interface scope are confirmed per project.
Network/powerBattery-operated room locks with low-battery alerts; one or two gateways for online common doors, placed after a radio survey; mechanical override on every lock.
Compliance evidenceFire-labeled guest and stair doors use only listed hardware with free egress; certificates and test reports for named SKUs are provided per RFQ.
Commercial termsCurrent MOQ policy, sample terms and lead time are confirmed in writing per quotation; warranty terms are confirmed in writing per quotation.
Answer unit

How access is configured at this scale

Fifty rooms is small enough for one front-desk encoding station and a compact common-door layer, yet large enough that key handling and staff audits already matter. The configuration below balances proven offline hardware on guest floors with a modest online layer.

Opening groupConfiguration choiceWhy at this scale
Guest-room doorsOffline MIFARE mortise or cylindrical hotel locksOne proven lock type across about 50 doors keeps spares, training and servicing simple for a small team.
Front-desk issuanceOne encoder station with card stockA single workstation covers typical check-in peaks without a second license or redundant station.
Main and staff entrancesOne or two online card or PIN readersScheduled unlock and remote audits suit unmanned evenings without a large gateway estate.
Lift or upper-floor accessFloor-control reader where floors are restrictedAt this size one cab or landing reader is usually enough when floor separation is required.
Back-of-house and amenity roomsOnline readers with staff schedulesHousekeeping windows and locker or laundry rooms benefit from timed access and audit trails.
Emergency and stair doorsListed exit hardware with mechanical overrideFree egress on labeled assemblies is mandatory; smart components never replace the mechanical path.
Evidence level

What evidence backs this configuration page

Evidence levelWhat this page states
L1 - Authorized named case studyAn L1 record names the hotel, the ownership or operator and the exact delivered scope, and is published only with signed written authorization. We do not currently publish an L1 record for a 50-room hotel project.
L2 - Verifiable public referenceAn L2 record links the project to a public source such as an operator announcement or procurement record that an external buyer can independently verify. No such reference is offered on this page.
L3 - Photos and records under NDAL3 material includes installation photographs, packing records and site documentation shared only under a signed non-disclosure agreement. Available to qualified buyers on request; it is not reproduced here.
L4 - Genericized project recordAn L4 record summarizes a real project with names, locations and identifying details removed, retaining only scale, architecture and lessons learned during deployment and service.
L5 - Representative typical configurationThis page publishes an L5 representative typical configuration for planning discussion. It is not a delivered project record; L1 to L4 evidence for comparable scopes is provided to qualified buyers under NDA per RFQ.
Planning BOM

Indicative bill of materials for this scale

The bill of materials below is a planning BOM for budgeting and scope discussion, not a quotation. Component counts follow per-opening logic and remain project-specific until a door schedule is reviewed.

ComponentQuantity logicNotes
Guest-room electronic locksOne per guest room, plus a spare allowanceSame model generation across floors simplifies batteries, cylinders and spare parts.
Encoder and encoding softwareOne front-desk station, typicallyA second station is added only when reception has separated arrival and cashier desks.
Key cards and consumablesA cards-per-room multiple plus yearly loss allowanceInitial card stock and reorder packs are sized to occupancy and turnover rates.
Online common-door readersOne per managed common or staff doorGateways are counted from a radio survey rather than from room count alone.
Lift floor-control equipmentOne interface per controlled lift, where specifiedController compatibility and cabling are confirmed with the lift vendor.
Override cylinders and key systemOne per lock, on one master hierarchyKey control procedure and registered blanks are part of handover documentation.
Scale logic

Moving below or above this scale changes the architecture. The notes below show what buyers should re-check when their project is smaller or larger than the representative 50-room property.

Re-check the items below when your project is smaller or larger than the representative scale on this page.

Scale factorHow the configuration changesWhat to verify
Guest-room populationBelow about 50 rooms a guesthouse may add keypad self check-in; above it online layers grow steadily.Re-run the online versus offline split from your real door schedule.
Front-desk staffingSmaller sites often run unmanned arrivals; larger sites run multiple encoding stations and shifts.Match issuance hardware to staffed hours rather than room count.
Common-door countMore amenity rooms and wings shift budget toward readers, gateways and integration.List every non-guest opening early; they are easy to miss in early budgets.
Lift and floor controlMulti-floor properties add cab readers; single-building low-rise sites often skip it.Confirm floor-restriction policy with the operator before pricing.
Network and gatewaysLarger or spread-out layouts require a radio coverage survey and more gateways.Budget commissioning time proportional to building geometry, not room count.
Servicing and sparesFifty rooms tolerate a small spares stock; bigger portfolios need contracted response.Spare-lock and cylinder strategy should be settled before handover.
Delivery workflow

From door schedule to handover in five steps

  1. Survey the propertyRecord every guest, common and service door with thickness, handing, material, fire labels and existing prep.
  2. Agree the architectureConfirm offline guest locks, online common doors, card format and PMS or front-desk workflow in writing.
  3. Validate samples and evidenceInstall samples on representative doors; certificates and test reports for named SKUs are provided per RFQ.
  4. Deploy floor by floorFit locks by floor, encode and test staff hierarchies, and keep the property operating during any retrofit phase.
  5. Hand over and trainTrain front desk and maintenance, register the master-key system, and file warranty and service documents.

Request a similar configuration for a 50-room hotel

Send us your door schedule and brand standard with a Request Similar Configuration note. We confirm offline or online architecture, card format, PMS and lift scope, and current MOQ policy, sample terms and lead time are confirmed in writing per quotation; certificates and test reports for named SKUs are provided per RFQ.

Request Similar ConfigurationProject configurations

Last updated: November 1, 2026 · Reviewed by the Smart Lock Factory editorial team

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp