What the SLK-8831 Data Sheet Actually Tells a Buyer
Buyers often receive a lock data sheet as if every line is equally purchasable. The slk 8831 specification decode begins with a stricter distinction: what the catalogue records, what it leaves open, and what must be confirmed before a lock enters a project order. This bid sheet turns those distinctions into clauses, evidence requests and acceptance checks for the SLK-8831 5-in-1 Fingerprint Keypad Smart Lock with App Control.
Direct answer. Short version — slk 8831 specification decode is treated here as slk 8831 specification decode first. slk-8831 comes second. The evidence for slk 8831 specification decode is named in the sections below. A slk 8831 specification decode is a component-level look at how the technology behaves. slk 8831 specification decode is where the limits sit. slk 8831 specification decode is verified on the dated product page.
Read slk 8831 specification decode as slk 8831 specification decode. It is a working definition of slk 8831 specification decode. Not a statutory or certified one. It applies to the market and product in question rather than as a general claim.
Bid basis: separate the record from the commitment
Use the SLK-8831 data sheet as a technical baseline, not as proof that every requirement has been accepted for a particular project. The catalogue gives a defined set of access, body, power, door-fit and environmental fields. Procurement still needs dated, revision-controlled evidence tied to the ordered configuration.
For commercial approval, confirm on the dated product page for the specific SKU every feature status or numerical value that affects selection. A dimension drawing, installation instruction or quotation should also identify the model and document revision it applies to.
| Evidence item | What it can establish | Treatment in the bid |
|---|---|---|
| Published catalogue record | Fields currently available for SLK-8831 | Baseline for comparison |
| Dated product page | Current SKU-level description | Required before purchase approval |
| Dimension drawings | Panel, mortise and installation geometry | Required when door fit affects the decision |
| Installation guide | Intended installation sequence and interfaces | Required for technical review |
| Full datasheet | Expanded operating and configuration details | Request on the project file |
| Written quotation | Configuration and commercial terms for the offer | Separate from technical acceptance |
| Sample acceptance record | Observed performance of the offered sample | Required before production release |
The key bid rule is simple: a recorded field is evidence to evaluate, while a project-specific acceptance statement is evidence to release.
Commercial issue schedule for the SLK-8831 technical specification
For the slk 8831 specification decode, each catalogue field becomes a numbered issue. Procurement should not mark an issue “resolved” merely because the catalogue contains a value. Resolution requires evidence appropriate to the decision and, where the specification drives procurement, confirmation on the dated product page for the specific SKU.
| Clause | Recorded position | Buyer’s bid requirement | Evidence before approval |
|---|---|---|---|
| C01 — Model identity | SLK-8831, 5-in-1 Fingerprint Keypad Smart Lock with App Control | Name the exact model and offered configuration | Dated product page and model marking |
| C02 — Access | RFID/IC card, passcode, fingerprint and mechanical override marked Standard | Define required routes and administration method | Credential and configuration statement |
| C03 — App wording | “App Control” appears in the model name; platform and network field is not populated | State the exact app function and connectivity expected | App and platform clarification |
| C04 — Faceplate | Zinc-alloy faceplate | Confirm material against project requirements | Drawing and sample inspection |
| C05 — Panel size | H227 × W66 × D20 mm | Check all three axes on the actual door | Dimension drawing and site measurement |
| C06 — Mortise | Stainless-steel mortise; mechanical anti-theft mortise with latch and multiple security deadbolts | Define required operation and geometry | Mortise drawing and sample test |
| C07 — Power | 4 × AA alkaline batteries; low-battery alert marked Standard | Confirm cell specification and alert behavior | Product page and user documentation |
| C08 — Door fit | Applicable door thickness 38–100 mm | Verify the door leaf, frame and installation space | Drawings, measurements and sample fit |
| C09 — Environment | −25°C to 65°C; 20–95% RH | Confirm whether the stated range suits the installation site | Dated page and project evidence |
| C10 — Project delivery | OEM/ODM options listed for logo, finish, packaging, manuals and product configuration | Select each project-specific deliverable | Written order configuration |
A supplier response should identify any deviation by clause number. “Subject to review” is not a response because it leaves the buyer without a comparable record.
Access clauses: four recorded methods and one named app
The access table records RFID/IC card, passcode, fingerprint and mechanical override as Standard. The product name also contains App Control, while the platform and network row is not populated. The bid must therefore distinguish a named feature from the operational detail needed to administer it.
The SLK-8831 access methods should be written into the schedule by method, administration route and evidence requirement—not as a compressed marketing list.
| Method | Catalogue position | Information the buyer must request |
|---|---|---|
| RFID/IC card | Standard | Credential format, reading method, card-issuance method and record handling |
| Passcode | Standard | Code format, creation method, validity control and change procedure |
| Fingerprint | Standard | Enrolment location, administrative workflow and expected storage arrangement |
| Mechanical override | Standard | Override interface, key or cylinder arrangement and authorized-use procedure |
| App control | Named in the product name; platform and network row unpopulated | App environment, account arrangement, network requirement and remotely accessible functions |
None of those entries establishes a particular credential volume, code format, sensor technology, cloud service, radio standard or remote-control function. Those details belong in the supplier’s response and should be checked against the dated product page for the specific SKU before approval.
For a project that assigns cards, creates temporary passcodes or administers fingerprints, the credential procedure must be reviewed separately. The SLK-8831 Credential and Software Configuration Options article provides the relevant configuration questions without repeating the body and fit clauses covered here.
Body and mortise clauses: what can be measured
The recorded SLK-8831 mortise lock information is concrete enough to begin a geometry check, but not complete enough to approve an installation by description alone. The faceplate is listed as zinc alloy, with dimensions H227 × W66 × D20 mm. The mortise is listed as stainless steel with an electroplated and oil-sealed finish.
The body description also identifies a mechanical anti-theft mortise with a latch and multiple security deadbolts. That wording is a catalogue description, not a project performance promise.
| Physical item | Recorded value | Procurement interpretation |
|---|---|---|
| Faceplate material | Zinc alloy | Record it as the stated material; request drawing confirmation if material matters |
| Faceplate dimensions | Height 227 mm; width 66 mm; depth 20 mm | Measure the installation envelope in all three directions |
| Mortise material | Stainless steel | Confirm on the dated product page for the specific SKU before ordering |
| Lock case | Mechanical anti-theft mortise | Do not substitute a general product description for a dimensional drawing |
| Moving parts | Latch and multiple security deadbolts | Ask for positions, projections and operating sequence |
| Finish | Electroplated and oil-sealed | Request the applicable finish reference and approved visual sample |
The missing procurement detail is as important as the recorded detail. Request the backset, spindle arrangement, cylinder and collar dimensions, latch projection, deadbolt positions, strike details, panel cut-outs and required door-swing clearance. These are questions, not claims that the catalogue records those values.
A physical sample should also reveal whether the specified lever, handle or keypad configuration matches the project schedule. Any adapter, modification or site carpentry should appear as a priced and approved line rather than an unrecorded assumption.
Power and environmental clauses: recorded limits, not endurance
The power field records 4 × AA alkaline batteries and marks a low-battery alert as Standard. The environment field records −25°C to 65°C and 20–95% relative humidity. These entries define what the catalogue records; they do not establish battery endurance, cycle count, ingress protection or suitability for an exposed exterior installation.
| Clause | Recorded value | Decision boundary |
|---|---|---|
| Battery type | 4 × AA alkaline | Confirm the required cell specification and replacement procedure |
| Low-battery indication | Standard | Ask how the alert presents and what happens at the alert threshold |
| Temperature | −25°C to 65°C | Compare with the documented site range, not an assumed climate |
| Relative humidity | 20–95% RH | Confirm the installation environment and relevant exposure conditions |
| Weather enclosure | No weatherproof-housing designation appears in the supplied record | Do not infer exterior suitability from the environmental range alone |
No battery-life number, cycle rating or outdoor-use statement should be added from memory or from another model.
For access-control projects, the procurement file should also state who replaces cells, how low alerts are escalated and whether access remains available during a power condition. The supplied record does not state an external emergency-power arrangement, so any project requirement for one must be raised as a clarification rather than silently assumed.
Door-fit gate: measurement before release
SLK-8831 door fit starts with the listed applicable door thickness of 38–100 mm. That range is only one dimension of a larger installation decision. A door within the range can still fail if the panel, mortise, frame, spindle or swing path does not match the supplied drawing.
flowchart TD
A[Record door leaf and frame] --> B[Check 38 to 100 mm thickness]
B --> C[Measure panel and mortise space]
C --> D[Check backset spindle and cylinder]
D --> E[Verify swing and emergency access]
E --> F[Record the fit decision]
F --> G[Release for controlled sample fit]
F --> H[Request drawing or design change]
Use this measurement record for each door type rather than recording only a nominal thickness.
| Measurement | Required observation | Disposition if different from the drawing |
|---|---|---|
| Door leaf thickness | Actual minimum and maximum measurement | Hold the fit approval |
| Faceplate envelope | Clearance across width, height and depth | Request revised dimensions |
| Mortise pocket | Position, depth and surrounding structure | Check retrofit preparation |
| Backset and spindle | Distance and interface geometry | Confirm compatible hardware |
| Cylinder and collar | Diameter, projection and alignment | Check door preparation |
| Latch and deadbolt path | Projection, opening and keep clearance | Identify the door operator |
| Frame and swing | Closed, latch and open positions | Resolve operational conflict |
The SLK-8831 and the Door It Has to Live In: Fit, Clearance and Retrofit guide expands the site-measurement method for retrofit and clearance decisions.
Blank fields are procurement answers still missing
The catalogue uses an em dash in the platform and network, packing, and capacity and versions rows. For this bid, each dash is an absence in the supplied model record. The buyer may not infer a platform, network option, export-carton arrangement, user capacity or version family from another model or from the product name alone.
| Unrecorded field | Correct bid treatment | Supplier response required |
|---|---|---|
| Platform and network: em dash | Do not claim a connectivity standard, cloud arrangement or remote service | State the app platform and network dependencies, or confirm the absence |
| Packing: em dash | Do not state carton quantity, carton dimensions or export weight | Provide packaging data if it affects ordering or freight approval |
| Capacity and versions: em dash | Do not state a user limit or offer a version family | Identify the applicable configuration and any capacity limits |
The App Control wording creates a precise clarification point. The name names an app, but the platform and network field supplies no further detail. A compliant bid can therefore include the wording while leaving the operating requirement open until the supplier provides a current SKU-specific statement.
Do not resolve these gaps with assumptions. Close each row with dated evidence, a written exclusion, or a change to the project requirement. The latter may be the most practical outcome: a project that does not require remote management can remove that demand and specify only the access methods it needs.
Documentation and OEM/ODM deliverables
The services field states that dimension drawings, an installation guide and the full datasheet are available on request. It also lists OEM/ODM options for custom logo, finish, packaging, manuals and product configuration for distributor and project orders.
Availability on request is not the same as inclusion in the order. Procurement should turn each document and customization into a line with an owner, revision and acceptance condition.
| Deliverable | Catalogue position | Order wording required |
|---|---|---|
| Dimension drawings | Available on request | Request a drawing identified for SLK-8831 and the offered configuration |
| Installation guide | Available on request | Request the applicable revision and language |
| Full datasheet | Available on request | Request the dated document before technical release |
| Custom logo | Listed OEM/ODM option | State artwork, placement, approval method and production reference |
| Custom finish | Listed OEM/ODM option | State the finish reference and approval sample |
| Custom packaging | Listed OEM/ODM option | State pack quantity, labels, cartons and destination requirements |
| Custom manuals | Listed OEM/ODM option | State language, content owner and revision process |
| Product configuration | Listed OEM/ODM option | State access, power, finish and project-specific selections |
A model may be evaluated from the catalogue and still need a separate production confirmation.
The supplier should send one evidence package rather than a collection of files with different dates. Attach the dated product page, drawing, installation guide, full datasheet, sample record and written configuration list under the same request number.
Decision comparison against the buyer’s requirement
A buyer should score the offer against project requirements, not against the number of populated catalogue fields. Use three states: Recorded, Clarified or Unresolved. Only a documented resolution should move a requirement into the purchase order.
| Buyer criterion | Evidence available | Current state | Release condition |
|---|---|---|---|
| Required access routes | Four methods marked Standard; app named | Clarified | Confirm credential method and app behavior |
| Door thickness | 38–100 mm recorded | Recorded | Check actual door and frame |
| Panel and mortise geometry | Faceplate dimensions and material recorded | Clarified | Receive and accept drawing |
| Mechanical operation | Latch and multiple deadbolts described | Clarified | Inspect sample and operating sequence |
| Power source | 4 × AA alkaline recorded | Recorded | Confirm cell and alert procedure |
| Installation environment | Temperature and humidity ranges recorded | Clarified | Match documented site conditions |
| Connectivity | App wording present; platform field absent | Unresolved | Obtain SKU-specific platform statement |
| Packing and capacity | No fields recorded | Unresolved | Request data only if commercially relevant |
| Project customization | OEM/ODM options listed | Clarified | Select options in the written order |
| Technical documentation | Drawings, guide and datasheet available on request | Clarified | Receive revision-controlled files |
The result should be a short qualification list beside the model decision. A high feature count does not compensate for unresolved door geometry or platform assumptions. Procurement value comes from knowing exactly what the supplier has committed to deliver.
Illustrative evaluation: one interior retrofit
The following is an illustrative procurement scenario, not a case study or a claim about a completed installation. Consider an interior office retrofit with one nominal 45 mm door leaf and a requirement for RFID card, passcode, fingerprint and mechanical override access.
The 45 mm leaf falls within the recorded 38–100 mm range, but the project team should still measure the door and inspect the frame. The evaluation would proceed as follows.
- Translate the access requirement. Record RFID/IC card, passcode, fingerprint and mechanical override as requested methods. Do not assume how cards or passcodes will be issued until the supplier defines the administrative arrangement.
- Check the application wording. Decide whether “App Control” is essential or merely present in the model name. If an app function is required, obtain a platform and network statement rather than accepting the name as a complete specification.
- Measure the installation. Capture thickness, faceplate clearance, mortise pocket, backset, spindle, cylinder position and door swing. Use the result to compare the site with the requested drawing.
- Request controlled evidence. Obtain the dated product page, dimension drawing, installation guide, full datasheet and written project configuration. Record the document revision against each requirement.
- Make a conditional decision. The project can move to sample fit only if the measured geometry and configuration resolve the open rows. A project may also narrow the requirement if the app function is unnecessary.
| Evaluation stage | Buyer-owned record | Supplier-owned evidence | Decision permitted |
|---|---|---|---|
| Requirement definition | Access and administration needs | Configuration response | Freeze the requested use |
| Site measurement | Door and frame schedule | Drawing comparison | Open sample fit |
| Sample review | Inspection record | Offered sample and procedure | Accept or reject geometry |
| Document control | Requirement-to-document matrix | Dated file set | Release for quotation |
| Order approval | Signed exception log | Written order confirmation | Place the controlled order |
This sequence prevents a nominal thickness match from becoming an unsupported statement that the lock fits the opening.
Sample and site acceptance plan
The sample review should test the offered configuration against the same clauses used in the bid. Acceptance criteria should come from the confirmed product documentation and project requirements; this article does not invent a pass threshold for an unrecorded feature.
| Check | Method | Evidence to retain |
|---|---|---|
| Identity and configuration | Compare model, hardware revision and configuration against the offer | Photographs, labels and configuration record |
| Panel fit | Install or test-fit without forcing the unit | Dimension measurements and fit notes |
| Mortise operation | Operate latch and deadbolts using the supplier procedure | Observation checklist |
| Mechanical override | Test the authorized override arrangement | Operation record |
| RFID/IC card | Test the confirmed credential and administration route | Test card and result |
| Passcode | Test the confirmed code-creation route | Test record |
| Fingerprint | Test the confirmed enrolment and recognition route | Enrolment and result record |
| App function | Test only the function confirmed for the SKU | Account-free demonstration notes where possible |
| Power and alert | Fit the specified cells and observe the documented low-battery indication | Test note |
| Document consistency | Check manual and drawing against the physical sample | Revision checklist |
This SLK-8831 procurement checklist is deliberately evidence-based. “The sample worked” is not an adequate release record; the retained note should identify which method, configuration and document revision produced the observation.
Any project requirement for audit records, remote release, emergency power or exterior exposure should be checked against the model record and supplier response. If it is not established, add it to the exception log before production approval.
Exceptions, local evidence, and order control
Technical acceptance and commercial acceptance should remain separate. The technical file may approve a model and configuration for defined use, while the quotation and order confirmation establish the commercial terms for that exact package.
Where a proposed value differs from the catalogue or drawings, record the clause, proposed value, reason, affected door, responsible person and approval status. Require a revision to the data, drawing or order configuration rather than relying on an email paraphrase.
Fire-door, egress, accessibility and local building requirements can change what a project may accept. They are not established by the SLK-8831 catalogue record, and their scope depends on the installation.
CONFIRM-WITH-LOCAL-AUTHORITIES: Verify the applicable authority, evidence scope and installation conditions for the project location, door type, egress route and accessibility requirement before approval.
The final technical release should identify the dated product page, drawing, installation guide, datasheet, sample configuration, quotation and purchase order by revision. Any future product or document change should be checked against the approved requirement matrix before it replaces the released version.
The same question is worked through in more detail in the smart lock security trends. That is the same question slk 8831 specification decode has to answer here.
Evaluation resources and category context
Two site-survey resources provide the wider measurement context: the Office Smart Lock Site Survey and the Smart Lock Retrofit Site Survey.
For this model’s companion evaluation documents, use the SLK-8831 and the Door It Has to Live In: Fit, Clearance and Retrofit, the SLK-8831 Credential and Software Configuration Options and the SLK-8831 Purchase-Order Checklist: What to Confirm Before Ordering.
The catalogue categories offer broader selection context, not substitute SLK-8831 product pages.
Release instruction for the procurement file
Place the completed issue schedule, evidence index, site measurements, sample acceptance record and signed exception log in one controlled procurement file. Attach the resolved package to a request-a-quote submission, identifying the exact SLK-8831 configuration and every required document or customization. The data sheet sets the boundary; the dated evidence and accepted sample establish what the buyer is actually ordering.

