Slk 8831 specification decode: A line-by-line procurement decode of the SLK-8831 data sheet, separating recorded specifications from evidence a buyer must.

Zveřejněno v:: bře 25, 2024

What the SLK-8831 Data Sheet Actually Tells a Buyer

What the SLK-8831 Data Sheet Actually Tells a Buyer

Buyers often receive a lock data sheet as if every line is equally purchasable. The slk 8831 specification decode begins with a stricter distinction: what the catalogue records, what it leaves open, and what must be confirmed before a lock enters a project order. This bid sheet turns those distinctions into clauses, evidence requests and acceptance checks for the SLK-8831 5-in-1 Fingerprint Keypad Smart Lock with App Control.

Direct answer. Short version — slk 8831 specification decode is treated here as slk 8831 specification decode first. slk-8831 comes second. The evidence for slk 8831 specification decode is named in the sections below. A slk 8831 specification decode is a component-level look at how the technology behaves. slk 8831 specification decode is where the limits sit. slk 8831 specification decode is verified on the dated product page.

Read slk 8831 specification decode as slk 8831 specification decode. It is a working definition of slk 8831 specification decode. Not a statutory or certified one. It applies to the market and product in question rather than as a general claim.

Bid basis: separate the record from the commitment

Use the SLK-8831 data sheet as a technical baseline, not as proof that every requirement has been accepted for a particular project. The catalogue gives a defined set of access, body, power, door-fit and environmental fields. Procurement still needs dated, revision-controlled evidence tied to the ordered configuration.

For commercial approval, confirm on the dated product page for the specific SKU every feature status or numerical value that affects selection. A dimension drawing, installation instruction or quotation should also identify the model and document revision it applies to.

Evidence itemWhat it can establishTreatment in the bid
Published catalogue recordFields currently available for SLK-8831Baseline for comparison
Dated product pageCurrent SKU-level descriptionRequired before purchase approval
Dimension drawingsPanel, mortise and installation geometryRequired when door fit affects the decision
Installation guideIntended installation sequence and interfacesRequired for technical review
Full datasheetExpanded operating and configuration detailsRequest on the project file
Written quotationConfiguration and commercial terms for the offerSeparate from technical acceptance
Sample acceptance recordObserved performance of the offered sampleRequired before production release

The key bid rule is simple: a recorded field is evidence to evaluate, while a project-specific acceptance statement is evidence to release.

Commercial issue schedule for the SLK-8831 technical specification

For the slk 8831 specification decode, each catalogue field becomes a numbered issue. Procurement should not mark an issue “resolved” merely because the catalogue contains a value. Resolution requires evidence appropriate to the decision and, where the specification drives procurement, confirmation on the dated product page for the specific SKU.

ClauseRecorded positionBuyer’s bid requirementEvidence before approval
C01 — Model identitySLK-8831, 5-in-1 Fingerprint Keypad Smart Lock with App ControlName the exact model and offered configurationDated product page and model marking
C02 — AccessRFID/IC card, passcode, fingerprint and mechanical override marked StandardDefine required routes and administration methodCredential and configuration statement
C03 — App wording“App Control” appears in the model name; platform and network field is not populatedState the exact app function and connectivity expectedApp and platform clarification
C04 — FaceplateZinc-alloy faceplateConfirm material against project requirementsDrawing and sample inspection
C05 — Panel sizeH227 × W66 × D20 mmCheck all three axes on the actual doorDimension drawing and site measurement
C06 — MortiseStainless-steel mortise; mechanical anti-theft mortise with latch and multiple security deadboltsDefine required operation and geometryMortise drawing and sample test
C07 — Power4 × AA alkaline batteries; low-battery alert marked StandardConfirm cell specification and alert behaviorProduct page and user documentation
C08 — Door fitApplicable door thickness 38–100 mmVerify the door leaf, frame and installation spaceDrawings, measurements and sample fit
C09 — Environment−25°C to 65°C; 20–95% RHConfirm whether the stated range suits the installation siteDated page and project evidence
C10 — Project deliveryOEM/ODM options listed for logo, finish, packaging, manuals and product configurationSelect each project-specific deliverableWritten order configuration

A supplier response should identify any deviation by clause number. “Subject to review” is not a response because it leaves the buyer without a comparable record.

Access clauses: four recorded methods and one named app

The access table records RFID/IC card, passcode, fingerprint and mechanical override as Standard. The product name also contains App Control, while the platform and network row is not populated. The bid must therefore distinguish a named feature from the operational detail needed to administer it.

The SLK-8831 access methods should be written into the schedule by method, administration route and evidence requirement—not as a compressed marketing list.

MethodCatalogue positionInformation the buyer must request
RFID/IC cardStandardCredential format, reading method, card-issuance method and record handling
PasscodeStandardCode format, creation method, validity control and change procedure
FingerprintStandardEnrolment location, administrative workflow and expected storage arrangement
Mechanical overrideStandardOverride interface, key or cylinder arrangement and authorized-use procedure
App controlNamed in the product name; platform and network row unpopulatedApp environment, account arrangement, network requirement and remotely accessible functions

None of those entries establishes a particular credential volume, code format, sensor technology, cloud service, radio standard or remote-control function. Those details belong in the supplier’s response and should be checked against the dated product page for the specific SKU before approval.

For a project that assigns cards, creates temporary passcodes or administers fingerprints, the credential procedure must be reviewed separately. The SLK-8831 Credential and Software Configuration Options article provides the relevant configuration questions without repeating the body and fit clauses covered here.

Body and mortise clauses: what can be measured

The recorded SLK-8831 mortise lock information is concrete enough to begin a geometry check, but not complete enough to approve an installation by description alone. The faceplate is listed as zinc alloy, with dimensions H227 × W66 × D20 mm. The mortise is listed as stainless steel with an electroplated and oil-sealed finish.

The body description also identifies a mechanical anti-theft mortise with a latch and multiple security deadbolts. That wording is a catalogue description, not a project performance promise.

Physical itemRecorded valueProcurement interpretation
Faceplate materialZinc alloyRecord it as the stated material; request drawing confirmation if material matters
Faceplate dimensionsHeight 227 mm; width 66 mm; depth 20 mmMeasure the installation envelope in all three directions
Mortise materialStainless steelConfirm on the dated product page for the specific SKU before ordering
Lock caseMechanical anti-theft mortiseDo not substitute a general product description for a dimensional drawing
Moving partsLatch and multiple security deadboltsAsk for positions, projections and operating sequence
FinishElectroplated and oil-sealedRequest the applicable finish reference and approved visual sample

The missing procurement detail is as important as the recorded detail. Request the backset, spindle arrangement, cylinder and collar dimensions, latch projection, deadbolt positions, strike details, panel cut-outs and required door-swing clearance. These are questions, not claims that the catalogue records those values.

A physical sample should also reveal whether the specified lever, handle or keypad configuration matches the project schedule. Any adapter, modification or site carpentry should appear as a priced and approved line rather than an unrecorded assumption.

Power and environmental clauses: recorded limits, not endurance

The power field records 4 × AA alkaline batteries and marks a low-battery alert as Standard. The environment field records −25°C to 65°C and 20–95% relative humidity. These entries define what the catalogue records; they do not establish battery endurance, cycle count, ingress protection or suitability for an exposed exterior installation.

ClauseRecorded valueDecision boundary
Battery type4 × AA alkalineConfirm the required cell specification and replacement procedure
Low-battery indicationStandardAsk how the alert presents and what happens at the alert threshold
Temperature−25°C to 65°CCompare with the documented site range, not an assumed climate
Relative humidity20–95% RHConfirm the installation environment and relevant exposure conditions
Weather enclosureNo weatherproof-housing designation appears in the supplied recordDo not infer exterior suitability from the environmental range alone

No battery-life number, cycle rating or outdoor-use statement should be added from memory or from another model.

For access-control projects, the procurement file should also state who replaces cells, how low alerts are escalated and whether access remains available during a power condition. The supplied record does not state an external emergency-power arrangement, so any project requirement for one must be raised as a clarification rather than silently assumed.

Door-fit gate: measurement before release

SLK-8831 door fit starts with the listed applicable door thickness of 38–100 mm. That range is only one dimension of a larger installation decision. A door within the range can still fail if the panel, mortise, frame, spindle or swing path does not match the supplied drawing.

flowchart TD
A[Record door leaf and frame] --> B[Check 38 to 100 mm thickness]
B --> C[Measure panel and mortise space]
C --> D[Check backset spindle and cylinder]
D --> E[Verify swing and emergency access]
E --> F[Record the fit decision]
F --> G[Release for controlled sample fit]
F --> H[Request drawing or design change]

Use this measurement record for each door type rather than recording only a nominal thickness.

MeasurementRequired observationDisposition if different from the drawing
Door leaf thicknessActual minimum and maximum measurementHold the fit approval
Faceplate envelopeClearance across width, height and depthRequest revised dimensions
Mortise pocketPosition, depth and surrounding structureCheck retrofit preparation
Backset and spindleDistance and interface geometryConfirm compatible hardware
Cylinder and collarDiameter, projection and alignmentCheck door preparation
Latch and deadbolt pathProjection, opening and keep clearanceIdentify the door operator
Frame and swingClosed, latch and open positionsResolve operational conflict

The SLK-8831 and the Door It Has to Live In: Fit, Clearance and Retrofit guide expands the site-measurement method for retrofit and clearance decisions.

Blank fields are procurement answers still missing

The catalogue uses an em dash in the platform and network, packing, and capacity and versions rows. For this bid, each dash is an absence in the supplied model record. The buyer may not infer a platform, network option, export-carton arrangement, user capacity or version family from another model or from the product name alone.

Unrecorded fieldCorrect bid treatmentSupplier response required
Platform and network: em dashDo not claim a connectivity standard, cloud arrangement or remote serviceState the app platform and network dependencies, or confirm the absence
Packing: em dashDo not state carton quantity, carton dimensions or export weightProvide packaging data if it affects ordering or freight approval
Capacity and versions: em dashDo not state a user limit or offer a version familyIdentify the applicable configuration and any capacity limits

The App Control wording creates a precise clarification point. The name names an app, but the platform and network field supplies no further detail. A compliant bid can therefore include the wording while leaving the operating requirement open until the supplier provides a current SKU-specific statement.

Do not resolve these gaps with assumptions. Close each row with dated evidence, a written exclusion, or a change to the project requirement. The latter may be the most practical outcome: a project that does not require remote management can remove that demand and specify only the access methods it needs.

Documentation and OEM/ODM deliverables

The services field states that dimension drawings, an installation guide and the full datasheet are available on request. It also lists OEM/ODM options for custom logo, finish, packaging, manuals and product configuration for distributor and project orders.

Availability on request is not the same as inclusion in the order. Procurement should turn each document and customization into a line with an owner, revision and acceptance condition.

DeliverableCatalogue positionOrder wording required
Dimension drawingsAvailable on requestRequest a drawing identified for SLK-8831 and the offered configuration
Installation guideAvailable on requestRequest the applicable revision and language
Full datasheetAvailable on requestRequest the dated document before technical release
Custom logoListed OEM/ODM optionState artwork, placement, approval method and production reference
Custom finishListed OEM/ODM optionState the finish reference and approval sample
Custom packagingListed OEM/ODM optionState pack quantity, labels, cartons and destination requirements
Custom manualsListed OEM/ODM optionState language, content owner and revision process
Product configurationListed OEM/ODM optionState access, power, finish and project-specific selections

A model may be evaluated from the catalogue and still need a separate production confirmation.

The supplier should send one evidence package rather than a collection of files with different dates. Attach the dated product page, drawing, installation guide, full datasheet, sample record and written configuration list under the same request number.

Decision comparison against the buyer’s requirement

A buyer should score the offer against project requirements, not against the number of populated catalogue fields. Use three states: Recorded, Clarified or Unresolved. Only a documented resolution should move a requirement into the purchase order.

Buyer criterionEvidence availableCurrent stateRelease condition
Required access routesFour methods marked Standard; app namedClarifiedConfirm credential method and app behavior
Door thickness38–100 mm recordedRecordedCheck actual door and frame
Panel and mortise geometryFaceplate dimensions and material recordedClarifiedReceive and accept drawing
Mechanical operationLatch and multiple deadbolts describedClarifiedInspect sample and operating sequence
Power source4 × AA alkaline recordedRecordedConfirm cell and alert procedure
Installation environmentTemperature and humidity ranges recordedClarifiedMatch documented site conditions
ConnectivityApp wording present; platform field absentUnresolvedObtain SKU-specific platform statement
Packing and capacityNo fields recordedUnresolvedRequest data only if commercially relevant
Project customizationOEM/ODM options listedClarifiedSelect options in the written order
Technical documentationDrawings, guide and datasheet available on requestClarifiedReceive revision-controlled files

The result should be a short qualification list beside the model decision. A high feature count does not compensate for unresolved door geometry or platform assumptions. Procurement value comes from knowing exactly what the supplier has committed to deliver.

Illustrative evaluation: one interior retrofit

The following is an illustrative procurement scenario, not a case study or a claim about a completed installation. Consider an interior office retrofit with one nominal 45 mm door leaf and a requirement for RFID card, passcode, fingerprint and mechanical override access.

The 45 mm leaf falls within the recorded 38–100 mm range, but the project team should still measure the door and inspect the frame. The evaluation would proceed as follows.

  1. Translate the access requirement. Record RFID/IC card, passcode, fingerprint and mechanical override as requested methods. Do not assume how cards or passcodes will be issued until the supplier defines the administrative arrangement.
  2. Check the application wording. Decide whether “App Control” is essential or merely present in the model name. If an app function is required, obtain a platform and network statement rather than accepting the name as a complete specification.
  3. Measure the installation. Capture thickness, faceplate clearance, mortise pocket, backset, spindle, cylinder position and door swing. Use the result to compare the site with the requested drawing.
  4. Request controlled evidence. Obtain the dated product page, dimension drawing, installation guide, full datasheet and written project configuration. Record the document revision against each requirement.
  5. Make a conditional decision. The project can move to sample fit only if the measured geometry and configuration resolve the open rows. A project may also narrow the requirement if the app function is unnecessary.
Evaluation stageBuyer-owned recordSupplier-owned evidenceDecision permitted
Requirement definitionAccess and administration needsConfiguration responseFreeze the requested use
Site measurementDoor and frame scheduleDrawing comparisonOpen sample fit
Sample reviewInspection recordOffered sample and procedureAccept or reject geometry
Document controlRequirement-to-document matrixDated file setRelease for quotation
Order approvalSigned exception logWritten order confirmationPlace the controlled order

This sequence prevents a nominal thickness match from becoming an unsupported statement that the lock fits the opening.

Sample and site acceptance plan

The sample review should test the offered configuration against the same clauses used in the bid. Acceptance criteria should come from the confirmed product documentation and project requirements; this article does not invent a pass threshold for an unrecorded feature.

CheckMethodEvidence to retain
Identity and configurationCompare model, hardware revision and configuration against the offerPhotographs, labels and configuration record
Panel fitInstall or test-fit without forcing the unitDimension measurements and fit notes
Mortise operationOperate latch and deadbolts using the supplier procedureObservation checklist
Mechanical overrideTest the authorized override arrangementOperation record
RFID/IC cardTest the confirmed credential and administration routeTest card and result
PasscodeTest the confirmed code-creation routeTest record
FingerprintTest the confirmed enrolment and recognition routeEnrolment and result record
App functionTest only the function confirmed for the SKUAccount-free demonstration notes where possible
Power and alertFit the specified cells and observe the documented low-battery indicationTest note
Document consistencyCheck manual and drawing against the physical sampleRevision checklist

This SLK-8831 procurement checklist is deliberately evidence-based. “The sample worked” is not an adequate release record; the retained note should identify which method, configuration and document revision produced the observation.

Any project requirement for audit records, remote release, emergency power or exterior exposure should be checked against the model record and supplier response. If it is not established, add it to the exception log before production approval.

Exceptions, local evidence, and order control

Technical acceptance and commercial acceptance should remain separate. The technical file may approve a model and configuration for defined use, while the quotation and order confirmation establish the commercial terms for that exact package.

Where a proposed value differs from the catalogue or drawings, record the clause, proposed value, reason, affected door, responsible person and approval status. Require a revision to the data, drawing or order configuration rather than relying on an email paraphrase.

Fire-door, egress, accessibility and local building requirements can change what a project may accept. They are not established by the SLK-8831 catalogue record, and their scope depends on the installation.

CONFIRM-WITH-LOCAL-AUTHORITIES: Verify the applicable authority, evidence scope and installation conditions for the project location, door type, egress route and accessibility requirement before approval.

The final technical release should identify the dated product page, drawing, installation guide, datasheet, sample configuration, quotation and purchase order by revision. Any future product or document change should be checked against the approved requirement matrix before it replaces the released version.

The same question is worked through in more detail in the smart lock security trends. That is the same question slk 8831 specification decode has to answer here.

Evaluation resources and category context

Two site-survey resources provide the wider measurement context: the Office Smart Lock Site Survey and the Smart Lock Retrofit Site Survey.

For this model’s companion evaluation documents, use the SLK-8831 and the Door It Has to Live In: Fit, Clearance and Retrofit, the SLK-8831 Credential and Software Configuration Options and the SLK-8831 Purchase-Order Checklist: What to Confirm Before Ordering.

The catalogue categories offer broader selection context, not substitute SLK-8831 product pages.

Release instruction for the procurement file

Place the completed issue schedule, evidence index, site measurements, sample acceptance record and signed exception log in one controlled procurement file. Attach the resolved package to a request-a-quote submission, identifying the exact SLK-8831 configuration and every required document or customization. The data sheet sets the boundary; the dated evidence and accepted sample establish what the buyer is actually ordering.

Váš košík
Vaše zkušenost s tímto webem se zlepší povolením souborů cookie. Zásady cookies
Chat on WhatsApp