RFID Hotel Lock with Hidden Card Reader
RFID Hotel Lock with Hidden Card Reader
RFID Hotel Lock with Hidden Card Reader
RFID Hotel Lock with Hidden Card Reader
RFID Hotel Lock with Hidden Card Reader
RFID Hotel Lock with Hidden Card Reader
RFID Hotel Lock with Hidden Card Reader
Hotel Door Lock

RFID Hotel Lock with Hidden Card Reader

RFID hotel lock with hidden card reader for hotel wooden and metal doors. SLK-9905A uses 4 AA batteries, a 7-pin cylinder and PC-linked guest card management. Request a project quotation.

RFID Hotel Lock with Hidden Reader for 38–100 mm Doors

The SLK-9905A is an RFID hotel lock with a hidden card reader for hotels, apartment projects and other access-controlled door deployments. It uses standalone Mifare-1 card access with a PC-linked encoder, so rooms can be managed without an in-room network.

  • A hidden RFID reader supports Mifare-1 13.56 MHz guest cards, so card access remains discrete on hotel doors without exposed reader hardware.
  • A 7-pin high-security profile cylinder and stainless steel plus alloy construction suit heavy-duty hotel door requirements where access hardware is exposed to frequent guest use.
  • Four AA alkaline batteries power the lock, while a low-battery alert helps staff replace cells before an unattended room loses card access.
Access Method
Mifare-1 13.56 MHz RFID cards
Door Thickness
38–100 mm
Power Supply
4 × AA alkaline batteries
Lock Body
7-pin high-security profile cylinder
Management
PC encoder and hotel lock management software
Finishes
Satin nickel or powder black

What makes the SLK-9905A a project-grade hotel lock

SLK-9905A Hidden reader preserves a clean door face

01Hidden reader preserves a clean door face

The reader is concealed within the lock rather than mounted as a separate visible accessory. This reduces exposed hardware on hotel guest doors and supports projects where the lock face must align with the door design.

02Standalone room access avoids in-room network work

Each lock operates as a standalone unit and receives programmed guest cards through the PC-linked encoder. Installation therefore does not require network cabling in every guest room, which simplifies room-level retrofit planning.

SLK-9905A Standalone room access avoids in-room network work
SLK-9905A Seven-pin cylinder supports a higher-security lock body

03Seven-pin cylinder supports a higher-security lock body

The lock uses a 7-pin high-security profile cylinder rather than a basic pin configuration. This gives project buyers a defined mechanical lock-body specification for hotel room entry doors.

04Low-battery alerts support planned maintenance

The standard low-battery alert indicates when the four AA batteries need attention. Staff can plan battery replacement before card access is lost, reducing emergency service calls.

SLK-9905A Low-battery alerts support planned maintenance

How the SLK-9905A works

The SLK-9905A uses programmed Mifare-1 cards and a PC-linked encoder to issue and control room access without an in-room network.

  1. Prepare the door and lock. Install the stainless steel and alloy lock with its 7-pin profile cylinder on a compatible wooden or metal door. Verify fit within the specified 38–100 mm door-thickness range.
  2. Connect the PC encoder. Connect the encoder to the front-desk or back-office PC used for hotel lock management. The encoder writes the guest and staff cards used by each standalone lock.
  3. Set room permissions and validity. Use the hotel lock management software to assign rooms, floors and check-in validity windows to each issued card. Unlock records can be reviewed through the management system.
  4. Issue guest cards. Write the selected Mifare-1 13.56 MHz card for the guest's assigned room and stay period. Staff can reissue a replacement card through the same encoder workflow.
  5. Monitor battery status. Check the standard low-battery alert during normal room servicing and replace all four AA alkaline batteries as indicated.

System & compatibility

The SLK-9905A is a standalone card-access lock managed through a PC encoder, with no in-room network and no listed mobile, keypad or fingerprint access method.

RFID / IC Card AccessStandard
Fingerprint Access—
Passcode / Keypad Access—
3D Face Recognition—
Mobile App Access—
Remote Control / Fob—
Network ModeStandalone lock with PC-linked card encoder; no in-room network required
Hotel Door CompatibilityWooden and metal doors
Applicable Door Thickness38–100 mm

Review the Specification tab for dimensions, door-fit requirements, operating documents and model-specific project details.

Compare with related models

A fact-by-fact comparison with other SLK models in the same product family, so you can choose the closest match for the door and project at hand.

SpecificationThis modelSLK-118SLK-118ESLK-2020SLK-230
Access methodsRFID/IC cardRFID/IC card, mechanical keyRFID/IC card, mechanical keyRFID/IC card, mechanical keyRFID/IC card, mechanical key
Smart platformHotel lock management software (PC encoder + guest cards)Hotel lock management software (PC)Hotel lock management software (PC)Hotel lock management software (PC)Hotel lock management software (PC)
Lock body / mortise7-pin high-security profile cylinderNo. 2 hotel mortiseNo. 2 hotel mortiseNo. 2 hotel mortise—
Door thickness38–100 mm————
Body materialStainless steel + alloy201 stainless steel201 stainless steel201 stainless steel304 stainless steel
Finish optionsSatin nickel / powder blackSilver / GoldSilver / GoldBlack / Silver / GoldSilver

Figures are taken from each model’s own specification sheet. Confirm door preparation, credentials and project options before approval.

Export packaging & logistics

Units per Export Carton6 pcs/ctn
Carton Dimensions485 × 330 × 445 mm
Gross Weight per Carton16.1 kg

Where the SLK-9905A is installed

The SLK-9905A is installed on hotel wooden or metal doors, combining a 7-pin high-security mortise with standalone PC-linked card management for guest access operations.

SLK-9905A - Hotels & resorts
Hotels & resorts
For hotels and resorts, the PC encoder writes room, floor and check-in validity data to guest cards, while the lock records unlock activity.
SLK-9905A - Serviced apartments & short-stay
Serviced apartments & short-stay
For serviced apartments and short-stay properties, standalone RFID card operation supports guest access without requiring an in-room network, with doors spanning 38–100 mm.
SLK-9905A - Renovation & retrofit projects
Renovation & retrofit projects
For renovation and retrofit projects, the SLK-9905A fits existing wooden or metal doors and uses four AA alkaline batteries, with low-battery alerts as standard.

Related resources for your project

Configure the SLK-9905A for your project
Send door dimensions, quantities and finish — we return a fitted configuration, packing and a project quotation.
Request a quote
Request the catalog
Access Methods
Fingerprint Access—
Passcode / Keypad Access—
RFID / IC Card AccessStandard
3D Face Recognition—
Finger Vein Recognition—
Mobile App Access—
Mechanical Override Key—
Remote Control / Fob—
Smart Platform & Connectivity
Smart Platform / Management Hotel lock management software (PC encoder + guest cards)
Network Mode Standalone lock; PC-linked card encoder (no in-room network required)
Management Functions Guest card issuance, floor/room permissions, check-in validity windows, unlock records
Mechanical
Product Style RFID Hotel Card Lock (Heavy-Duty ANSI)
Panel / Body Material Stainless steel + alloy
Finish / Color Options Satin nickel / powder black
Lock Body / Mortise 7-pin high-security profile cylinder
Applicable Door Thickness 38–100 mm
Suitable Door Types Hotel wooden / metal doors
Power & Capacity
Power Supply 4 × AA alkaline batteries
User Capacity Mifare-1 13.56 MHz cards
Low-Battery AlertStandard
Export Packaging
Units per Export Carton 6 pcs/ctn
Carton Dimensions 485 × 330 × 445 mm
Gross Weight per Carton 16.1 kg
Documentation & OEM Service
Documentation Dimension drawings, installation guide and full datasheet available on request
OEM / ODM Custom logo, finish, packaging, manuals and product configuration for distributor and project orders

The SLK-9905A differs from the SLK-2020 on access methods: it is built around RFID/IC card rather than RFID/IC card, mechanical key. Choose the SLK-9905A for projects that call for rfid/ic card, and choose the SLK-2020 rather than the SLK-9905A when the opening needs rfid/ic card, mechanical key; confirm both against the measured door before quotation.

The SLK-9905A is specified for hotel wooden / metal doors, a door thickness of 38–100 mm, a 7-pin high-security profile cylinder. Those figures describe the factory configuration, not a guarantee on a measured opening. Before ordering, measure the real opening and pass over its thickness, handing, backset and current mortise size so the correct lock body is supplied.

The SLK-9905A is managed through Hotel lock management software (PC encoder + guest cards), with functions covering guest card issuance, floor/room permissions, check-in validity windows, unlock records. Standalone card locks issue credentials at the front-desk encoder and do not require in-room networking; networked versions exchange data with the property platform. The buyer lists which doors must work online and which can stay offline, and the integration route and supporting hardware are then confirmed per door group.

The SLK-9905A runs on 4 × AA alkaline batteries; the supplied facts do not state an external emergency method. Site staff should keep the specified cells in stock and know where the external power contact sits before the low-battery warning appears.

The SLK-9905A is supplied with RFID/IC card access. Every listed method is taken from the model’s own specification sheet rather than assumed for the family. Different doors on the same site can be configured for different methods, so map users to openings before finalising the model list.

Guest credentials are written to RFID/IC cards at a front-desk encoder working with Hotel lock management software (PC encoder + guest cards); the lock itself reads the card offline, so no wiring to each door is needed for a standalone system. Quotation lists encoder model, number of units, initial card stock and spares so the front desk is operational from opening day.

For bulk orders the SLK-9905A is packed at 6 pcs/ctn; export carton 485 × 330 × 445 mm; 16.1 kg. This applies to the satin nickel / powder black version. The factory can align palletisation and shipping marks with the importer requirements once the confirmed quantity is provided.

The factory supports custom logo, finish, packaging, manuals and product configuration for distributor and project orders for the SLK-9905A. The catalogued finish range is satin nickel / powder black, with stainless steel + alloy construction. A branded sample set — logo placement, finish, manual and carton — is approved first, and volume production follows that signed reference.

You may also like

Take it to your cart

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp