RFID Hotel Electronic Door Lock
RFID Hotel Electronic Door Lock
RFID Hotel Electronic Door Lock
Hotel Door Lock

RFID Hotel Electronic Door Lock

RFID hotel electronic door lock SLK-9951TH for hotel and resort projects. Features Mifare card access, a mechanical override key, 4 AA batteries, standalone operation, and PC hotel management software. Request a quotation.

Mifare RFID access for 34–100 mm hotel doors with battery override

The SLK-9951TH is an RFID hotel electronic door lock that gives hotel and resort operators Mifare card access, guest-card issuance, room permissions, and unlock records through PC hotel lock management software. Its standalone lock architecture uses a PC-linked card encoder, so no in-room network wiring is required.

  • The lock accepts standard Mifare 13.56 MHz cards, so a hotel can issue guest cards from the PC encoder without fitting network wiring to every room.
  • A standard mechanical override key gives staff a physical access route if the four AA alkaline batteries expire, reducing lockout risk during guest stays.
  • The heavy-duty ANSI lock body pairs a 5-pin high-security profile cylinder with an anti-card latch, supporting controlled card entry on hotel wooden and metal doors.
Model
SLK-9951TH
Access credential
Standard Mifare 13.56 MHz cards
Door thickness
34–100 mm
Power supply
4 × AA alkaline batteries
Management architecture
Standalone lock with PC-linked card encoder
Export packing
6 units per carton; 445 × 415 × 365 mm; 19.0 kg gross

What makes the SLK-9951TH a project-grade hotel lock

SLK-9951TH Room installation avoids in-room network wiring

01Room installation avoids in-room network wiring

Each lock operates in standalone mode and communicates through the PC-linked card encoder, so hotel rooms do not require network cabling for access control. This reduces retrofit work in existing wooden or metal doors.

02Battery depletion does not remove the physical access route

The lock uses four AA alkaline batteries and includes a standard mechanical override key. Staff can open the door with the key when battery power is unavailable, then replace the batteries without relying on card credentials.

SLK-9951TH Battery depletion does not remove the physical access route
SLK-9951TH Card issuance and room controls share one PC workflow

03Card issuance and room controls share one PC workflow

The hotel lock management software supports guest card issuance, floor and room permissions, check-in validity windows, and unlock records. These functions let front-desk staff control temporary access while retaining an activity trail for hotel review.

04The mortise suits security-focused hotel door installation

The heavy-duty ANSI lock body uses a 5-pin high-security profile cylinder and an anti-card latch. Together with the stainless steel and alloy construction, these features provide a defined mechanical configuration for hotel procurement.

SLK-9951TH The mortise suits security-focused hotel door installation

How the SLK-9951TH works

The system issues and manages Mifare guest cards through PC hotel lock management software, while each door operates as a standalone RFID lock.

  1. Configure the management software. Set up guest card issuance, floor and room permissions, check-in validity windows, and unlock records on the PC management system.
  2. Connect the card encoder. Link the PC encoder to the management workflow so staff can prepare the Mifare cards used for room access.
  3. Issue a guest card. Create a card with the guest's assigned room permissions and validity window through the PC encoder.
  4. Open the room. Present the standard Mifare card at the RFID lock, which operates independently of an in-room network.
  5. Review or revoke access. Use the management functions to review unlock records and adjust card permissions as the guest stay changes.

System & compatibility

The SLK-9951TH combines a standalone RFID door lock with a PC-linked encoder and Mifare cards for hotel guest access management.

RFID card accessStandard Mifare 13.56 MHz cards
Management platformHotel lock management software with PC encoder and guest cards
Network modeStandalone lock; PC-linked card encoder; no in-room network required
Mechanical overrideStandard mechanical override key
Fingerprint access—
Passcode or keypad access—
Mobile app access—
Remote control or fob—
3D face recognition—
Finger vein recognition—

Review the SLK-9951TH dimensions and technical details in the Specification tab, and request the dimension drawings, installation guide, and full datasheet for the project file.

Compare with related models

A fact-by-fact comparison with other SLK models in the same product family, so you can choose the closest match for the door and project at hand.

SpecificationThis modelSLK-118SLK-118ESLK-2020SLK-230
Smart platformHotel lock management software (PC encoder + guest cards)Hotel lock management software (PC)Hotel lock management software (PC)Hotel lock management software (PC)Hotel lock management software (PC)
Lock body / mortise5-pin high-security profile cylinderNo. 2 hotel mortiseNo. 2 hotel mortiseNo. 2 hotel mortise—
Door thickness34–100 mm————
Body materialStainless steel + alloy201 stainless steel201 stainless steel201 stainless steel304 stainless steel
Finish optionsBlack with silver edgeSilver / GoldSilver / GoldBlack / Silver / GoldSilver
User capacityMifare-1 13.56 MHz cards————

Figures are taken from each model’s own specification sheet. Confirm door preparation, credentials and project options before approval.

Export packaging & logistics

Units per Export Carton6 pcs/ctn
Carton Dimensions445 × 415 × 365 mm
Gross Weight per Carton19.0 kg

Where the SLK-9951TH is installed

The SLK-9951TH is installed on hotel wooden or metal doors and pairs a 5-pin high-security mortise with standalone RFID card management.

SLK-9951TH - Hotels & resorts
Hotels & resorts
Guest cards encode room, floor, and check-in validity windows through the PC encoder, supporting front-desk issuance and controlled room access.
SLK-9951TH - Serviced apartments & short-stay
Serviced apartments & short-stay
For serviced apartments, standalone RFID operation avoids in-room network requirements, while Mifare-1 13.56 MHz cards can be reissued as occupancy changes.
SLK-9951TH - Renovation & retrofit projects
Renovation & retrofit projects
For retrofit projects, the 34–100 mm door range and mechanical override fit existing wooden or metal doors without room-network wiring.

Related resources for your project

Configure the SLK-9951TH for your project
Send door dimensions, quantities and finish — we return a fitted configuration, packing and a project quotation.
Request a quote
Request the catalog
Access Methods
Fingerprint Access—
Passcode / Keypad Access—
RFID / IC Card AccessStandard
3D Face Recognition—
Finger Vein Recognition—
Mobile App Access—
Mechanical Override KeyStandard
Remote Control / Fob—
Smart Platform & Connectivity
Smart Platform / Management Hotel lock management software (PC encoder + guest cards)
Network Mode Standalone lock; PC-linked card encoder (no in-room network required)
Management Functions Guest card issuance, floor/room permissions, check-in validity windows, unlock records
Mechanical
Product Style RFID Hotel Card Lock (Heavy-Duty ANSI)
Panel / Body Material Stainless steel + alloy
Finish / Color Options Black with silver edge
Lock Body / Mortise 5-pin high-security profile cylinder
Applicable Door Thickness 34–100 mm
Suitable Door Types Hotel wooden / metal doors
Power & Capacity
Power Supply 4 × AA alkaline batteries
User Capacity Mifare-1 13.56 MHz cards
Export Packaging
Units per Export Carton 6 pcs/ctn
Carton Dimensions 445 × 415 × 365 mm
Gross Weight per Carton 19.0 kg
Documentation & OEM Service
Documentation Dimension drawings, installation guide and full datasheet available on request
OEM / ODM Custom logo, finish, packaging, manuals and product configuration for distributor and project orders

The SLK-9951TH differs from the SLK-118E on lock body / mortise: it is built around 5-pin high-security profile cylinder rather than No. 2 hotel mortise. The two models share one family but diverge on lock body / mortise; pick the SLK-9951TH for 5-pin high-security profile cylinder, or specify the SLK-118E rather than the SLK-9951TH for no. 2 hotel mortise.

The SLK-9951TH is specified for hotel wooden / metal doors, a door thickness of 34–100 mm, a 5-pin high-security profile cylinder. Those figures describe the factory configuration, not a guarantee on a measured opening. Final confirmation of the lock body and latch relies on the buyer supplying the actual thickness, handing, backset and existing mortise dimensions in advance.

The SLK-9951TH is managed through Hotel lock management software (PC encoder + guest cards), with functions covering guest card issuance, floor/room permissions, check-in validity windows, unlock records. Standalone card locks issue credentials at the front-desk encoder and do not require in-room networking; networked versions exchange data with the property platform. Share the installed PMS name and the floor or room count first, and the factory will confirm whether the site needs a gateway and specify the matching interface software and encoders.

The SLK-9951TH is supplied with RFID/IC card and mechanical key access. Every listed method is taken from the model’s own specification sheet rather than assumed for the family. The specification sheet is the source for this list; any credential not shown here is treated as unconfirmed and requested before quotation.

The SLK-9951TH runs on 4 × AA alkaline batteries; entry remains possible through the mechanical override key. For an uninterrupted site, agree a battery-change interval with the installer and verify the external power input before handover.

Guest credentials are written to RFID/IC cards at a front-desk encoder working with Hotel lock management software (PC encoder + guest cards); the lock itself reads the card offline, so no wiring to each door is needed for a standalone system. The buyer states cards-per-room and the spare-blank percentage for turnover, and the factory supplies encoders and stock to match.

The factory supports custom logo, finish, packaging, manuals and product configuration for distributor and project orders for the SLK-9951TH. The catalogued finish range is black with silver edge, with stainless steel + alloy construction. Before production, the buyer supplies branding artwork and approves finish and packaging samples; any configuration change is locked at that point.

For bulk orders the SLK-9951TH is packed at 6 pcs/ctn; export carton 445 × 415 × 365 mm; 19.0 kg. This applies to the black with silver edge version. Container planning should use the stated gross weight and carton size, with any custom packaging checked for load changes before approval.

You may also like

Take it to your cart

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp