RFID Hotel Card Lock (Front Mount)
RFID Hotel Card Lock (Front Mount)
RFID Hotel Card Lock (Front Mount)
RFID Hotel Card Lock (Front Mount)
RFID Hotel Card Lock (Front Mount)
Hotel Door Lock

RFID Hotel Card Lock (Front Mount)

RFID hotel card lock SLK-230-F uses PC hotel management software and a standalone encoder, a 304 stainless body, mechanical key backup, four-AA power and silver finish. Request a quotation.

Front-mount RFID hotel lock with mechanical key backup

The SLK-230-F is a front-mount RFID hotel card lock that supports guest card issuance, room permissions, validity windows and unlock records through PC hotel lock management software. It is intended for hospitality importers, distributors, hotel contractors and integrators deploying standalone locks with a PC-linked card encoder.

  • A standalone lock works with a PC-linked card encoder and requires no in-room network, so project teams can retrofit guest rooms without running network cabling to each lock.
  • A mechanical override key is included as standard, giving staff a physical opening method if guest access fails or the four-AA alkaline batteries need replacement.
  • The front-mount body uses 304 stainless steel with a silver finish, providing a defined construction specification for hospitality door installations and distributor project documentation.
Access method
RFID/IC card access with a standard mechanical override key
Management architecture
Standalone lock linked to a PC card encoder
Body material
304 stainless steel
Power supply
4 × AA alkaline batteries
Low-battery alert
Standard
Export packaging
10 units per carton; 570 × 355 × 345 mm; 22 kg gross weight

What makes the SLK-230-F a project-grade hotel lock

SLK-230-F No in-room network required

01No in-room network required

The SLK-230-F operates as a standalone lock and communicates through a PC-linked card encoder. This removes the need for in-room network wiring and lets contractors assess room retrofit work around the door and power requirements rather than data-cable routing.

02Staff retain a physical opening route

A mechanical override key is standard, so staff can open a guest room if the electronic card credential cannot be used. The key provides a defined contingency for access faults rather than making guest-card availability the only operational route.

SLK-230-F Staff retain a physical opening route
SLK-230-F Room controls are managed from PC software

03Room controls are managed from PC software

Hotel lock management software supports guest card issuance, floor and room permissions, check-in validity windows and unlock records. Property teams can therefore configure room access and retain an operating record through one PC management workflow.

04Project documentation supports fit review

Dimension drawings, an installation guide and a full datasheet are available on request. Contractors can review the front-mount configuration and door requirements before ordering, while importers can assemble the relevant technical documents for project approval.

SLK-230-F Project documentation supports fit review

Where the SLK-230-F is installed

The SLK-230-F installs as a front-mount RFID hotel card lock with a PC-linked standalone encoder, a 304 stainless steel panel, and standard mechanical override.

SLK-230-F - Hotels & resorts
Hotels & resorts
For hotels and resorts, the SLK-230-F supports guest card issuance, floor and room permissions, check-in validity windows, and unlock records through PC hotel lock management software.
SLK-230-F - Serviced apartments & short-stay
Serviced apartments & short-stay
For serviced apartments and short-stay properties, the SLK-230-F uses standalone RFID card access with a PC-linked encoder, so guest cards can be issued or reissued without an in-room network.
SLK-230-F - Renovation & retrofit projects
Renovation & retrofit projects
For renovation and retrofit projects, the SLK-230-F provides a silver 304 stainless steel front-mount lock with mechanical override, dimension drawings, and an installation guide available on request.

How the SLK-230-F works

The SLK-230-F manages guest access by writing card credentials through a PC-linked encoder and applying room permissions and validity windows to each lock.

  1. Configure the PC management software. Hotel lock management software is used to set guest card issuance, floor and room permissions, check-in validity windows and unlock-record review.
  2. Issue a guest RFID/IC card. An operator uses the PC-linked card encoder to write the authorized room and validity period to the guest card.
  3. Present the card at the lock. The guest presents the RFID/IC card to the standalone lock, which applies the access permissions already encoded for the room and stay period.
  4. Review access records. Property personnel can review unlock records through the PC software to support guest-access administration and operational audits.
  5. Use the mechanical key when required. Staff use the standard mechanical override key when electronic guest access cannot be used, including during a low-battery condition or credential issue.

System & compatibility

The SLK-230-F is a standalone RFID hotel lock system with PC-linked card encoding and no in-room network requirement.

Lock modelSLK-230-F
Product typeFront-mount RFID hotel card lock
Access credentialRFID/IC card
Management platformHotel lock management software for PC
Encoder connectionPC-linked card encoder
In-room networkNot required
Mechanical overrideStandard mechanical override key
Power4 × AA alkaline batteries
Low-battery alertStandard
Body material and finish304 stainless steel; silver
Fingerprint access—
Passcode or keypad access—
3D face recognition—
Mobile app access—
Remote control or fob—

Review the SLK-230-F dimensions, door compatibility, included components and full technical data in the Specification tab; dimension drawings, installation guidance and the full datasheet are available on request.

Compare with related models

A fact-by-fact comparison with other SLK models in the same product family, so you can choose the closest match for the door and project at hand.

SpecificationThis modelSLK-118SLK-118ESLK-2020SLK-230
Body material304 stainless steel201 stainless steel201 stainless steel201 stainless steel304 stainless steel
Finish optionsSilverSilver / GoldSilver / GoldBlack / Silver / GoldSilver

Figures are taken from each model’s own specification sheet. Confirm door preparation, credentials and project options before approval.

Export packaging & logistics

Units per Export Carton10 pcs/ctn
Carton Dimensions570 × 355 × 345 mm
Gross Weight per Carton22 kg

Related resources for your project

Configure the SLK-230-F for your project
Send door dimensions, quantities and finish — we return a fitted configuration, packing and a project quotation.
Request a quote
Request the catalog
Access Methods
Fingerprint Access—
Passcode / Keypad Access—
RFID / IC Card AccessStandard
3D Face Recognition—
Finger Vein Recognition—
Mobile App Access—
Mechanical Override KeyStandard
Remote Control / Fob—
Smart Platform & Connectivity
Smart Platform / Management Hotel lock management software (PC)
Network Mode Standalone lock; PC-linked card encoder (no in-room network required)
Management Functions Guest card issuance, floor/room permissions, check-in validity windows, unlock records
Mechanical
Product Style RFID Hotel Card Lock (Front Mount)
Panel / Body Material 304 stainless steel
Finish / Color Options Silver
Power & Capacity
Power Supply 4 × AA alkaline batteries
Low-Battery AlertStandard
Export Packaging
Units per Export Carton 10 pcs/ctn
Carton Dimensions 570 × 355 × 345 mm
Gross Weight per Carton 22 kg
Documentation & OEM Service
Documentation Dimension drawings, installation guide and full datasheet available on request
OEM / ODM Custom logo, finish, packaging, manuals and product configuration for distributor and project orders

The SLK-230-F differs from the SLK-2020 on body material: it is built around 304 stainless steel rather than 201 stainless steel. Compare this body material point together with door thickness and credentials, then choose the SLK-230-F for 304 stainless steel or the SLK-2020 rather than the SLK-230-F for 201 stainless steel.

The SLK-230-F is managed through Hotel lock management software (PC), with functions covering guest card issuance, floor/room permissions, check-in validity windows, unlock records. Standalone card locks issue credentials at the front-desk encoder and do not require in-room networking; networked versions exchange data with the property platform. The property should state its current locking platform and number of floors or rooms; integration method and any encoder or gateway are then confirmed for the site.

The SLK-230-F is supplied with RFID/IC card and mechanical key access. Every listed method is taken from the model’s own specification sheet rather than assumed for the family. The buyer should confirm the required credential for each opening rather than assume every door uses the full set, then configure the order to match.

The SLK-230-F runs on 4 × AA alkaline batteries; entry remains possible through the mechanical override key. Plan battery replacement as routine maintenance and confirm the exact emergency-power connector and battery type before deployment.

Guest credentials are written to RFID/IC cards at a front-desk encoder working with Hotel lock management software (PC); the lock itself reads the card offline, so no wiring to each door is needed for a standalone system. Where several desks run in parallel, encoder count and card-stock allocation per desk are agreed before the order is confirmed.

A lost card is deactivated at the management encoder and a replacement card is issued to the guest, so the lost credential no longer opens the SLK-230-F. Replacement cards are drawn from on-site stock, while the deactivated card is logged against the room for the audit record.

The factory supports custom logo, finish, packaging, manuals and product configuration for distributor and project orders for the SLK-230-F. The catalogued finish range is silver, with 304 stainless steel construction. Provide logo artwork and packaging files and sign off the finish and configuration samples early, so production matches the approved branded version.

For bulk orders the SLK-230-F is packed at 10 pcs/ctn; export carton 570 × 355 × 345 mm; 22 kg. This applies to the silver version. Custom OEM packaging can change carton fill and weight, so logistics figures are reconfirmed if branded packing is selected.

You may also like

Take it to your cart

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp