Electronic Keypad Entry Door Lock
Electronic Keypad Entry Door Lock
Electronic Keypad Entry Door Lock
Electronic Keypad Entry Door Lock
Electronic Keypad Entry Door Lock
Electronic Keypad Entry Door Lock
Electronic Keypad Entry Door Lock
Electronic Keypad Entry Door Lock
Hotel Door Lock

Electronic Keypad Entry Door Lock

RFID hotel card lock with optional keypad, Bluetooth connectivity, and PC management software. Uses an aluminum alloy body, No. 2 short mortise, and four AA batteries. Request a project quotation.

RFID hotel card access with optional keypad and PC management

The SLK-236-2 is an RFID hotel card lock with optional keypad versions that supports guest card issuance, room permissions, validity windows, and unlock records through hotel lock management software. It is intended for hospitality importers, distributors, integrators, and project contractors deploying electronic access across guest rooms.

  • RFID card access is standard and a mechanical override key is included as standard, so property staff retain a physical entry method when a guest card or battery requires attention.
  • Optional keypad versions use TTLock with Bluetooth connectivity, which supports a second access route and configuration without introducing wired in-room network cabling.
  • The aluminum alloy panel measures 300 × 75 × 15 mm and uses a No. 2 short hotel mortise, so door measurements and mortise geometry must be checked before ordering.
  • Four AA alkaline batteries power the lock and a low-battery alert is standard, allowing staff to address a weakening battery before access is interrupted.
  • The No. 2 short hotel mortise is a defined mechanical configuration for retrofit planning, while the supplied dimension drawings and installation guide support installer review before deployment.
Standard access method
RFID / IC card
Optional access method
Passcode / keypad by model version
Panel material
Aluminum alloy
Panel dimensions
300 × 75 × 15 mm
Power supply
4 × AA alkaline batteries
Mortise
No. 2 short hotel mortise

What makes the SLK-236-2 a project-grade hotel lock

SLK-236-2 Card management supports controlled room access

01Card management supports controlled room access

The PC hotel lock management software supports guest card issuance, floor and room permissions, check-in validity windows, and unlock records. This gives property teams a defined workflow for changing room access without relying on unrestricted mechanical copies.

02Keypad versions add a configured access route

Passcode keypad access is optional and depends on the selected model version, while TTLock is specified for keypad versions. Buyers must confirm the required configuration because the access method and management arrangement are not interchangeable across every quotation.

SLK-236-2 Keypad versions add a configured access route
SLK-236-2 Mechanical override preserves staff contingency access

03Mechanical override preserves staff contingency access

A mechanical override key is standard, so staff have a physical entry method for battery replacement or card-related access issues. The override does not replace the electronic card-management workflow or guest-card reissuance process.

04Defined mortise geometry supports fit verification

The lock uses a No. 2 short hotel mortise and has a 300 × 75 × 15 mm aluminum alloy panel. These defined dimensions let installers compare the lock with the door before ordering and reduce uncertainty around retrofit preparation.

SLK-236-2 Defined mortise geometry supports fit verification

Where the SLK-236-2 is installed

The SLK-236-2 RFID hotel card lock is installed in hotels and serviced apartments, with standard IC card access, a No. 2 short hotel mortise and aluminum alloy panel.

SLK-236-2 - Hotels & resorts
Hotels & resorts
For hotels and resorts, the SLK-236-2 supports guest card issuance, floor and room permissions, check-in validity windows and unlock records through PC hotel lock management software.
SLK-236-2 - Serviced apartments & short-stay
Serviced apartments & short-stay
For serviced apartments and short-stay properties, standard IC card access and optional keypad versions provide configurable entry methods for rotating residents and staff.
SLK-236-2 - Renovation & retrofit projects
Renovation & retrofit projects
For renovation and retrofit projects, the SLK-236-2 combines a 300 × 75 × 15 mm aluminum alloy panel with a No. 2 short hotel mortise and Bluetooth connectivity.

How the SLK-236-2 works

The SLK-236-2 grants access through RFID cards, with optional passcode entry on keypad versions, while property teams administer permissions and records through the specified management software.

  1. Configure the lock version. Confirm whether the project requires the standard RFID card lock or the optional keypad version. TTLock is specified for keypad versions, so the management arrangement follows the selected configuration.
  2. Prepare and fit the door. Installers review the door measurements and No. 2 short hotel mortise before preparation. Dimension drawings and an installation guide are available on request for comparison with the door schedule.
  3. Issue access credentials. Property staff use the PC hotel lock management software for guest card issuance and assignment of floor and room permissions. Check-in validity windows define the active period for each issued credential.
  4. Operate and monitor access. Guests present RFID cards, or use the optional keypad route on configured versions, to open the door. The software records unlock activity for operational review.
  5. Handle depleted power and lost cards. The low-battery alert signals that battery attention is required, while the standard mechanical override key supports physical staff access. A lost guest card is reissued through the management workflow after the previous credential is addressed.

System & compatibility

The SLK-236-2 is configured around RFID card access, optional keypad operation on selected versions, PC hotel management software, and a No. 2 short hotel mortise.

RFID / IC card accessStandard
Passcode / keypad accessOptional by model version
Fingerprint access—
3D face recognition—
Finger vein recognition—
Mobile app access—
Remote control / fob—
Management softwareHotel lock management software for PC; TTLock on keypad versions
ConnectivityBluetooth
Mechanical override keyStandard
Lock body / mortiseNo. 2 short hotel mortise
Power supply4 × AA alkaline batteries
Low-battery alertStandard
Finish optionsBlack / Silver / Gold

Review the full model-specific dimensions, configuration, and supplied documentation in the Specification tab.

Compare with related models

A fact-by-fact comparison with other SLK models in the same product family, so you can choose the closest match for the door and project at hand.

SpecificationThis modelSLK-236SLK-002SLK-228SLK-232
Access methodspasscode, RFID/IC card, mechanical keypasscode, RFID/IC card, mechanical keypasscode, RFID/IC card, mobile app, mechanical keypasscode, RFID/IC card, mobile app, mechanical keypasscode, RFID/IC card, mobile app, mechanical key
Smart platformHotel lock management software (PC); TTLock on keypad versionsHotel lock management software (PC); TTLock on keypad versionsTTLock (Bluetooth); hotel lock management software available on card-model versionsTTLock (Bluetooth); hotel lock management software available on card-model versionsHotel lock management software (PC); TTLock on keypad versions
Lock body / mortiseNo. 2 short hotel mortiseNo. 2 short hotel mortise——No. 2 hotel mortise
Body materialAluminum alloyAluminum alloy——304 stainless steel
Finish optionsBlack / Silver / GoldBlack / Silver / GoldBlack / SilverBlackSilver (stainless brushed)
Power supply4 × AA alkaline batteries4 × AA alkaline batteries——4 × AA alkaline batteries

Figures are taken from each model’s own specification sheet. Confirm door preparation, credentials and project options before approval.

Export packaging & logistics

Units per Export Carton10 pcs/ctn
Carton Dimensions570 × 355 × 346 mm
Gross Weight per Carton23.53 kg

Related resources for your project

Configure the SLK-236-2 for your project
Send door dimensions, quantities and finish — we return a fitted configuration, packing and a project quotation.
Request a quote
Request the catalog
Access Methods
Fingerprint Access—
Passcode / Keypad Access Optional (model version)
RFID / IC Card AccessStandard
3D Face Recognition—
Finger Vein Recognition—
Mobile App Access—
Mechanical Override KeyStandard
Remote Control / Fob—
Model Versions Available Passcode keypad — confirm configuration on the order / quotation
Smart Platform & Connectivity
Smart Platform / Management Hotel lock management software (PC); TTLock on keypad versions
Connectivity Bluetooth
Management Functions Guest card issuance, floor/room permissions, check-in validity windows, unlock records
Mechanical
Product Style RFID Hotel Card Lock
Panel / Body Material Aluminum alloy
Finish / Color Options Black / Silver / Gold
Panel Dimensions 300 × 75 × 15 mm
Lock Body / Mortise No. 2 short hotel mortise
Power & Capacity
Power Supply 4 × AA alkaline batteries
Low-Battery AlertStandard
Export Packaging
Units per Export Carton 10 pcs/ctn
Carton Dimensions 570 × 355 × 346 mm
Gross Weight per Carton 23.53 kg
Documentation & OEM Service
Documentation Dimension drawings, installation guide and full datasheet available on request
OEM / ODM Custom logo, finish, packaging, manuals and product configuration for distributor and project orders

The SLK-236-2 differs from the SLK-232 on lock body / mortise: it is built around No. 2 short hotel mortise rather than No. 2 hotel mortise. Compare this lock body / mortise point together with door thickness and credentials, then choose the SLK-236-2 for no. 2 short hotel mortise or the SLK-232 rather than the SLK-236-2 for no. 2 hotel mortise.

The SLK-236-2 is specified for a no. 2 short hotel mortise lock body. Those figures describe the factory configuration, not a guarantee on a measured opening. Site staff should confirm the measured door thickness, swing direction, backset and existing cut-out, then share those figures with the factory before production.

The SLK-236-2 is managed through Hotel lock management software (PC); TTLock on keypad versions, with functions covering guest card issuance, floor/room permissions, check-in validity windows, unlock records. Standalone card locks issue credentials at the front-desk encoder and do not require in-room networking; networked versions exchange data with the property platform. Room architecture and the protocol already running at the property determine whether a gateway or interface is required, so those points are settled in pre-sale engineering.

The SLK-236-2 is supplied with passcode, RFID/IC card and mechanical key access. Every listed method is taken from the model’s own specification sheet rather than assumed for the family. Treat this list as the baseline configuration and confirm any project-specific credential additions before approval.

The SLK-236-2 runs on 4 × AA alkaline batteries; entry remains possible through the mechanical override key. The buyer verifies which cells the model uses and how emergency power is applied, then briefs maintenance staff before handover.

Guest credentials are written to RFID/IC cards at a front-desk encoder working with Hotel lock management software (PC); TTLock on keypad versions; the lock itself reads the card offline, so no wiring to each door is needed for a standalone system. A multi-floor property may need more than one encoder, so desk layout and room count drive the equipment list in the quote.

The factory supports custom logo, finish, packaging, manuals and product configuration for distributor and project orders for the SLK-236-2. The catalogued finish range is black / silver / gold, with aluminum alloy construction. Buyers provide vector logo files and packaging references; the factory returns samples for sign-off so the produced units match the approved look.

For bulk orders the SLK-236-2 is packed at 10 pcs/ctn; export carton 570 × 355 × 346 mm; 23.53 kg. This applies to the black / silver / gold version. Freight forwarders can use these dimensions and weight to plan container loading before the order quantity is finalised.

You may also like

Take it to your cart

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp