5-in-1 Fingerprint Keypad Smart Lock with App Control
Fingerprint Door Lock

5-in-1 Fingerprint Keypad Smart Lock with App Control

5-in-1 fingerprint keypad smart lock SLK-8831 combines fingerprint, passcode and RFID card entry with a mechanical override key. Fits doors 38–100 mm with an anti-theft mortise; request a project quotation.

Four Access Methods in One Anti-Theft Mortise Lock for Doors 38–100 mm

The SLK-8831 is a 5-in-1 fingerprint keypad smart lock for importers, distributors, integrators and project contractors deploying access-controlled doors with an anti-theft mortise. It supports fingerprint, passcode and RFID card entry together with a mechanical override key, with configuration and documentation provided for project orders.

  • Fingerprint, passcode and RFID card entry, plus a mechanical override key, provide four credential paths, which lets one lock support daily users, temporary visitors and physical override procedures.
  • A zinc-alloy faceplate and stainless-steel mortise are paired with an electroplated and oil-sealed finish, which gives the project buyer defined exterior components to assess against the installation environment.
  • The mortise includes a latch and multiple security deadbolts, which means the door set must be checked for compatible latch and deadbolt positioning before the lock is specified.
Product code
SLK-8831
Access methods
Fingerprint, passcode, RFID card and mechanical key
Door thickness
38–100 mm
Power supply
4 × AA alkaline batteries
Mortise construction
Anti-theft mortise with latch and multiple security deadbolts
Operating range
-25°C to 65°C; 20–95% RH

What makes the SLK-8831 a fingerprint smart lock

SLK-8831 Four access paths reduce credential-format constraints

01Four access paths reduce credential-format constraints

The SLK-8831 supports fingerprint, keypad passcode and RFID card entry, plus a mechanical override key. This gives operators separate methods for routine users, temporary access and physical entry rather than requiring every user to use one credential type.

02Anti-theft mortise sets the mechanical project requirements

The lock body combines a latch with multiple security deadbolts for the closing assembly. Door measurements must confirm the latch, deadbolt positions and mortise arrangement before installation is approved.

SLK-8831 Anti-theft mortise sets the mechanical project requirements
SLK-8831 Battery power avoids a lock-side wiring requirement

03Battery power avoids a lock-side wiring requirement

Four AA alkaline batteries power the lock, so the installation does not require a lock-side electrical supply. A low-battery alert provides a prompt to replace the batteries, while the mechanical key provides a physical fallback if they expire.

04Defined faceplate dimensions support early fit checks

The zinc-alloy faceplate measures 227 × 66 × 20 mm, with a stainless-steel mortise and electroplated, oil-sealed finish. These dimensions and finish details should be checked against the door leaf, frame and project documentation before ordering.

SLK-8831 Defined faceplate dimensions support early fit checks

How the SLK-8831 works

The SLK-8831 grants access through fingerprint, passcode or RFID card entry, or with a mechanical key, subject to the credentials configured for each deployment.

  1. Confirm the door and mortise. Check the 38–100 mm door-thickness range, faceplate dimensions, latch and security deadbolt arrangement before ordering.
  2. Install the lock assembly. Fit the zinc-alloy faceplate, stainless-steel mortise, latch and deadbolts according to the installation guide and dimension drawings.
  3. Register operational credentials. Configure the required fingerprints, passcodes and RFID cards for the approved access groups.
  4. Train users on entry methods. Use the voice-guided programming function for local setup and brief users on their assigned fingerprint, passcode or card access.
  5. Maintain power and physical access. Replace the four AA alkaline batteries when the low-battery alert appears, and retain the mechanical override key for controlled fallback.

System & compatibility

The SLK-8831 is a battery-powered mortise lock with four access methods and no specified mobile-app, 3D face, finger-vein or remote-fob capability.

Fingerprint accessStandard
Passcode and keypad accessStandard
RFID and IC card accessStandard
Mobile app access—
Mechanical override keyStandard
3D face recognition—
Finger-vein recognition—
Remote control and fob—
Power source4 × AA alkaline batteries
Applicable door thickness38–100 mm
Operating temperature and humidity-25°C–65°C; 20–95% RH

Review the Specification tab for model-specific dimensions, access configuration, operating limits and available documentation.

Compare with related models

A fact-by-fact comparison with other SLK models in the same product family, so you can choose the closest match for the door and project at hand.

SpecificationThis modelSLK-005SLK-019SLK-026
Access methodsfingerprint, passcode, RFID/IC card, mechanical keyfingerprint, passcode, RFID/IC card, mobile app, mechanical keyfingerprint, passcode, RFID/IC card, mobile app, mechanical keyfingerprint, passcode, RFID/IC card, mobile app, mechanical key
Lock body / mortiseMechanical anti-theft mortise with latch and multi security deadbolts——Compatible with large multi-bolt security-door mortises
Door thickness38–100 mm———
Body materialZinc-alloy faceplate (H227 × W66 × D20 mm); stainless-steel mortise; electroplated + oil-sealed finishAluminum alloy304 stainless steelManganese-steel front panel + aluminum-alloy handle

Figures are taken from each model’s own specification sheet. Confirm door preparation, credentials and project options before approval.

Operating environment

Operating Temperature / Humidity-25°C – 65°C; 20–95% RH

Where the SLK-8831 is installed

SLK-8831 is installed on 38–100 mm doors with a mechanical anti-theft mortise, providing fingerprint, keypad and RFID access with a mechanical override key.

SLK-8831 - Apartments & homes
Apartments & homes
For apartments and homes, the SLK-8831 supports fingerprint, passcode and RFID entry while its mechanical override key provides a backup access method.
SLK-8831 - Rental & short-stay units
Rental & short-stay units
For rental and short-stay units, the SLK-8831 offers three electronic access methods without requiring mobile app access or remote-control fobs.
SLK-8831 - Small offices & staff doors
Small offices & staff doors
For small offices and staff doors, the SLK-8831 combines a latch and multi security deadbolts with fingerprint, keypad, RFID and mechanical key access.

Related resources for your project

Configure the SLK-8831 for your project
Send door dimensions, quantities and finish — we return a fitted configuration, packing and a project quotation.
Request a quote
Request the catalog
Access Methods
Fingerprint AccessStandard
Passcode / Keypad AccessStandard
RFID / IC Card AccessStandard
3D Face Recognition—
Finger Vein Recognition—
Mobile App Access—
Mechanical Override KeyStandard
Remote Control / Fob—
Mechanical
Product Style 5-in-1 Anti-Theft Smart Mortise Lock
Panel / Body Material Zinc-alloy faceplate (H227 × W66 × D20 mm); stainless-steel mortise; electroplated + oil-sealed finish
Lock Body / Mortise Mechanical anti-theft mortise with latch and multi security deadbolts
Applicable Door Thickness 38–100 mm
Power & Capacity
Power Supply 4 × AA alkaline batteries
Low-Battery AlertStandard
Environment
Operating Temperature / Humidity -25°C – 65°C; 20–95% RH
Documentation & OEM Service
Documentation Dimension drawings, installation guide and full datasheet available on request
OEM / ODM Custom logo, finish, packaging, manuals and product configuration for distributor and project orders

The SLK-8831 differs from the SLK-005 on access methods: it is built around fingerprint, passcode, RFID/IC card, mechanical key rather than fingerprint, passcode, RFID/IC card, mobile app, mechanical key. Compare this access methods point together with door thickness and credentials, then choose the SLK-8831 for fingerprint, passcode, rfid/ic card, mechanical key or the SLK-005 rather than the SLK-8831 for fingerprint, passcode, rfid/ic card, mobile app, mechanical key.

The SLK-8831 is specified for a door thickness of 38–100 mm, a mechanical anti-theft mortise with latch and multi security deadbolts. Those figures describe the factory configuration, not a guarantee on a measured opening. The installer should check the real thickness and handing, record the backset and photograph the existing mortise before the lock body is finalised.

The SLK-8831 is supplied with fingerprint, passcode, RFID/IC card and mechanical key access. Every listed method is taken from the model’s own specification sheet rather than assumed for the family. Match this credential set to the openings on the project — shared entrances and individual rooms may need different methods — and size the order accordingly.

The SLK-8831 runs on 4 × AA alkaline batteries; entry remains possible through the mechanical override key. Replacement batteries should be scheduled as part of ongoing maintenance; confirm the specified cell type and the emergency-power contact for the model first.

Administrators can deactivate the missing card or code and restore access by enrolling a replacement fingerprint and passcode, or issuing and enrolling a replacement RFID/IC card or using the mechanical override key. Because credentials are managed individually, losing one does not require re-keying the door. The buyer should confirm who holds administrator rights and the spare-credential process before handover.

The SLK-8831 is a 5-in-1 Anti-Theft Smart Mortise Lock. Unlocking is by fingerprint, passcode, RFID/IC card and mechanical key. The model sits at this point in the factory range; buyers compare nearby codes by style and credentials rather than by appearance alone.

The factory supports custom logo, finish, packaging, manuals and product configuration for distributor and project orders for the SLK-8831. The catalogued construction is zinc-alloy faceplate (h227 × w66 × d20 mm); stainless-steel mortise; electroplated + oil-sealed finish. Branding artwork, finish approvals, packaging layout and any model-configuration changes should be agreed and supplied before production so the branded items match the approved samples.

A quotation is configured around the number of SLK-8831 locks, door data, finish, credential and accessory requirements and installation scope, after the buyer supplies project quantities and site measurements. Before approval the factory confirms lead time, finish, documentation and after-sales period item by item and notes any scope not covered.

You may also like

Take it to your cart

Your Cart
Your experience on this site will be improved by allowing cookies Cookie Policy
Chat on WhatsApp