Door Thickness and Backset Variance in Saudi Arabia: A Survey Worksheet
This piece treats saudi arabia door thickness survey worksheet as a decision document rather than a summary, and each section below carries one piece of the evidence. Briefing memo
Direct answer. This article defines saudi arabia door thickness survey worksheet through saudi arabia door thickness survey worksheet. The definition of saudi arabia door thickness survey worksheet is deliberately narrow. It is non-statutory
To: Hotel Group procurement, technical services and design leadsFrom: Smart-lock specification reviewSubject: Normalise door geometry before freezing the programme standardDecision required: Approve a survey and mock-up gate before any door family is released for order.
Decision to approve
Use the saudi arabia door thickness survey worksheet before fixing a lock family for a new-build hotel programme in Saudi Arabia. A reusable survey matters because the same door specification repeats across properties; one unreconciled exception can propagate into the hotel door hardware schedule. This Saudi Arabia site survey should cover guest rooms and public-area perimeter doors, then separate repeatable families from controlled variants. The product family this applies to is the smart door locks.
Adapt the Smart Lock Retrofit Site Survey for door-family capture and the Office Smart Lock Site Survey for property sign-off. Tag the file with saudi-arabia and use one reference format for every opening.
Opening record to retain
Assign a unique property, block, floor, room and leaf reference. Survey representative doors and every identified type; do not let one convenient room define the standard. Record:
| Field | Entry required | Procurement use |
|---|---|---|
| Door reference | Property, block, floor, room and leaf side | Prevents omissions and duplicates |
| Door family | Guest room, public area, service or common area | Groups comparable openings |
| door thickness measurement | Actual leaf thickness at declared points; record each reading | Reveals build variation |
| backset measurement | Edge datum to relevant lock axis; record the datum | Enables drawing comparison |
| Datum and handing | Hand, swing, edge, door state and drawing reference | Removes dimension ambiguity |
| Edge and strike | Lipping, rebate, gasket, strike and frame clearance | Exposes hidden fit issues |
| Construction | Aluminium, uPVC, timber or glass; sheltered or exposed | Routes atypical doors |
| Evidence | Marked photos, drawing, date and surveyor | Supports traceability |
The sheet should also state its units, measurement convention and revision number. Preserve original readings instead of overwriting them with an averaged value.
Measurement method that preserves comparability
A nominal schedule is not enough. Use the same instrument and declared points for the door thickness measurement at every opening, with no unexplained averaging. For backset measurement, state what the number means: distance from the latch edge to the spindle, cylinder or another lock axis, as defined by the candidate drawing. Record the door state. A copied value can look precise and still be incomparable.
Include a sketch or annotated photograph showing the edge datum, centreline, strike, rebate and any adaptor. For aluminium and uPVC leaves, record profile and visible build-up, not only thickness. For heavy timber, note visible hardware routing. Glass and unusual ironmongery need a separate fit review. The completed saudi arabia door thickness survey worksheet should identify units, tolerance convention and sign-off status; do not create tolerances without the selected product’s approved fit criteria.
Classify each door before selection
Cluster results by construction, thickness, backset datum, handing and frame detail. Apply a documented decision rule:
| Classification | Comparison test | Procurement response | Required evidence |
|---|---|---|---|
| Standard core | Measurements repeat and drawings agree | Nominate one candidate for the family | Survey sheet and dated product-page check |
| Controlled variant | A repeatable difference remains but is documented | Give the variant a separate schedule line | Consultant-approved comparison and one mock-up |
| Unresolved exception | Datum is missing, the leaf is atypical or drawings conflict | Hold order release and resolve the condition | Revisit, marked photographs and recorded approval |
A controlled variant is not permission to order “close enough.” The hotel door hardware schedule should show which attributes differ, why the difference exists and who approved the deviation.
flowchart TD
A[Assign a unique door reference] --> B[Measure thickness and backset]
B --> C[Record datum, construction and photographs]
C --> D[Cluster doors into families]
D --> E[Compare each family with a candidate SKU]
E --> F{Unresolved fit found}
F -->|Yes| G[Run a door hardware mock-up]
F -->|No| H[Add the family to the schedule]
G --> I[Record consultant and contractor approval]
I --> H
Check smart lock door compatibility
For each proposed family, compare the survey with the candidate’s dated product-page drawing and fit conditions. Confirm on the dated product page for the specific SKU the permitted door thickness, backset, mortise or gearbox arrangement, through-bolt or spindle arrangement, finish and any required adaptor. The survey establishes what is present at the door; it does not establish product compatibility.
Use a door hardware mock-up for every controlled variant before release. The Aluminium-profile and Heavy Timber Doors: What It Means for Smart Lock Selection in Saudi Arabia guidance addresses leaf construction, while Specifying Smart Locks for New-Build Hotel Programmes Projects in Saudi Arabia covers reuse across properties. For exposed openings, record ambient heat and dust separately from geometry and confirm the operating conditions stated for the SKU.
Route the Saudi evidence questions correctly
Before procurement, ask whether the specific lock SKU falls within the Saudi SABER/SASO certificate-of-conformity route and whether any IECEE CB usage is relevant. Whether a lock falls within a defined conformity list is a per-product question; verify the scope rather than treating the route as blanket approval.
CONFIRM-WITH-LOCAL-CONFORMITY-REVIEW: Confirm the Saudi SABER/SASO scope, required evidence and approving route for each SKU with the project’s Saudi compliance reviewer before order release.
Use the Reading SASO and SABER Documents for Smart Locks: A Buyer Guide for Saudi Arabia and SASO and SABER Routing Evidence for Smart Locks Sold in Saudi Arabia: A Buyer Document Checklist resources to structure the evidence request. Also ask which authority signs off on the complete fire-rated or life-safety door assembly; the lock decision is only one part of that assembly.
CONFIRM-WITH-LOCAL-FIRE-SAFETY-REVIEW: Confirm which authority signs off on each fire-rated or life-safety door assembly and which evidence it requires.
Issue the field sheet in Arabic and English, retain the surveyor’s original measurements and route changes through the consultant and contractor approval chain. Record the saso-saber evidence status beside each door family instead of attaching one market-wide conclusion to the programme.
Final decision and ownership
Release a door family only when the field record is complete, the dimensions use defined datums, the candidate SKU has been checked on its dated product page and every variant has a mock-up with recorded approval. Keep unresolved items on a hold list so the programme schedule never conceals an assumption.
When the door schedule changes, compare revised references against the baseline instead of recollecting every opening. Issue a new survey version with dated photographs and a concise change note, then repeat the affected classification and approval steps. This prevents several conflicting definitions of the “standard” door from circulating between properties.
Readers comparing approaches usually start with smart lock market for apartments. That is the same question saudi arabia door thickness survey worksheet has to answer here.Ask the shortlisted supplier for a completed worksheet, a proposed family matrix, the dated product-page references and an exception log. The supplier can populate a sample from drawings and field data, while the hotel group retains ownership of site measurement, mock-up approval and schedule release.
The commercial step that follows is to request a quote.

