Direct-connect Versus Cylindrical Lock Body: Decision Matrix for Clinics and Medical Offices Operators
Use the direct connect versus cylindrical body clinics matrix as a bid instrument, not as a product ranking. Direct connect and cylindrical body can describe different relationships between a panel, lock mechanism, and door case, and suppliers may use the words inconsistently. This sheet therefore compares complete proposed assemblies rather than brochure labels. It gives a procurement manager a shared room schedule, door survey, technical response form, weighted score, sample test, and clarification list. A bidder earns an architectural preference only when drawings and physical tests demonstrate a better fit for the actual clinic or medical office door. Credentials, emergency behavior, audit logging, privacy mode, network management, and associated door hardware remain separate acceptance items.
Direct answer. Short version — direct connect versus cylindrical body clinics matrix is treated here as direct connect versus cylindrical body clinics matrix first. cylindrical-body comes second. The evidence for direct connect versus cylindrical body clinics matrix is named in the sections below. A direct connect versus cylindrical body clinics matrix compares alternatives without marketing language. direct connect versus cylindrical body clinics matrix carries the weight in the scoring of direct connect versus cylindrical body clinics matrix.
Read direct connect versus cylindrical body clinics matrix as direct connect versus cylindrical body clinics matrix. It is a working definition of direct connect versus cylindrical body clinics matrix. Not a statutory or certified one. It applies to the market and product in question rather than as a general claim.
- State the criteria — name the criteria for direct connect versus cylindrical body clinics matrix before comparing anything
- Apply the same criteria — score every option against cylindrical-body the same way
- State the trade-off — say what each option in bid definitions costs you
- direct connect versus cylindrical body clinics matrix runs this sequence, and cylindrical body is the record it produces.
1. Bid definitions that control the comparison
Treat both architectural terms as bidder-defined for this tender. The procurement file should ask what each supplier means, where the interface begins and ends, and which components remain in the installer’s scope. It should also prevent a cylinder from being confused with a cylindrical lock body, because the cylinder, case, spindle, rose, and mortise carrier can be separate objects.
| Bid term | Working meaning for this tender | Evidence required | Not established by the label |
|---|---|---|---|
| Direct-connect | A proposed arrangement in which the panel and lock mechanism are coupled as a specified assembly | Dimensioned assembly drawing, interface parts list, and connection method | Credential method, offline operation, audit behavior, or retrofit suitability |
| Cylindrical-body | A proposed lock body or case described around a cylindrical interface | Cutout drawing, case dimensions, spindle details, and supplied components | Compatibility with the existing door or emergency performance |
| Existing-case reuse | Retention of the installed case, subject to documented modification | Before-and-after survey, modification list, and installer scope | A no-change installation |
| Proposed architecture | The complete body, panel, hardware, power, management, and door-interface package | Parts schedule, manuals, drawings, and sample test | Compliance or suitability based on the product name alone |
Use this sequence to screen a bidder’s response before scoring technical fit:
flowchart TD
A[Define room use and logging need] --> B{Existing door case reusable}
B -->|Yes| C[Document case interfaces and modification limits]
B -->|No| D[Require a complete assembly drawing]
C --> E{Bidder definition matches the drawing}
D --> E
E --> F[Build the access and audit schedule]
F --> G[Test the sample and documents]
G --> H[Apply the pre-agreed score]
A bidder that cannot trace the selected term to a drawing, parts list, and install method has supplied terminology rather than an evaluable construction.
2. Room-and-door decision matrix
The direct connect versus cylindrical body clinics matrix compares possible benefits against the evidence required to prove them. Neither column receives automatic preference. A direct-connect arrangement may reduce visible interfaces when the assembly is genuinely integrated, while a cylindrical-body proposal may align with an existing case when its dimensions and accessories match. Those are hypotheses to test, not guaranteed outcomes.
| Evaluation area | Direct-connect response to examine | Cylindrical-body response to examine | Award evidence required |
|---|---|---|---|
| New construction | Explain whether one coordinated assembly simplifies the panel, case, spindle, and wiring package | Explain whether a defined case and interface suit the door fabrication | Coordinated drawings, parts list, and installation method |
| Retrofit | Quantify removal, patching, frame work, and changes to the retained door case | Verify the existing case, backset, bore, spindle, cylinder, and strike arrangement | Before-and-after survey and signed scope allocation |
| Interface count | List every mechanical and electrical interface in the proposed assembly | List every adaptor, carrier, collar, spindle, or conversion part | Exploded drawing and installer responsibility matrix |
| Associated door hardware | Show interaction with latch, deadbolt, strike, closer, hold-open, and escape hardware | Show whether the body preserves the intended hardware arrangement | Test door fitted with all offered components |
| Audit and privacy | Explain how access events and no-log behavior are configured | Explain the same functions independently of the case geometry | Event demonstration and room-by-room configuration sheet |
| Power | Identify power source, connection route, and service access | Identify battery or wired arrangement that remains available with the selected body | Power drawing, sample behavior, and maintenance instructions |
| Management | State which functions are local and which depend on a gateway or software | State the same boundaries for the selected body | Architecture diagram and offline-operation test |
| Service | Identify replaceable modules and access points | Identify whether diagnosis requires case removal or panel removal | Service procedure, parts availability, and fault-isolation plan |
| Standardization | Explain how multiple door types share components without compromising fit | Explain how case options standardize across a mixed door schedule | Approved product-family and door-type schedule |
| Documentation | Require one drawing set covering body, panel, door, and hardware | Require separate case, interface, and installation drawings | Dated, revision-controlled documents tied to the quoted SKU |
| Pilot risk | Test the most difficult door before approving a rollout | Test the oldest or least representative case before rollout | Sample report with corrective actions closed |
The matrix should become a clarification instrument rather than a scoring shortcut. If the same evidence could support either architecture, award on installation scope, service access, and demonstrated fit instead of on terminology. If a bidder claims that one approach removes risk, require the failed conditions that would disprove the claim.
3. Audit, privacy, and emergency behavior by room
The first clinical access question is not whether every door should log. It is which rooms need to identify who opened them and which rooms need the opposite: a door configured not to create an electronic transaction trail. That distinction affects every room in a clinic or medical office, from treatment spaces to controlled-access stores. The body architecture must support the selected behavior without changing the access, emergency, or privacy requirements assigned to each opening.
| Room or opening | Typical access requirement | Audit requirement | Privacy constraint | Question carried into the bid |
|---|---|---|---|---|
| Consulting room | Staff badge, code, or approved mobile credential | Room-specific decision | Avoid unnecessary records of patient presence | Can this opening operate in the required privacy mode? |
| Treatment room | Fast staff entry with controlled override | Room-specific decision | Avoid creating a patient-presence trail by default | Does no-log operation preserve normal authorized access? |
| Medication or controlled-access store | Restricted staff credential | Entry events and event retrieval requested | Limit access and administrative visibility | Which events are captured, exported, and retained? |
| Records room | Limited authorized staff access | Detailed access trail requested | Restrict viewing and administrative access | Can the audit trail be assigned specifically to this door? |
| Staff and service areas | Badge or application access suited to workflow | Operational events as specified | Separate staff activity from patient-room records | Which credentials and event types are used? |
| Ambulance or service entrance | Rapid, controlled entry with emergency operation | Entry evidence as required | Limit unrelated clinical information | How does the body interact with closer, hold-open, and escape hardware? |
| General circulation | Access policy based on building operation | Avoid indiscriminate logging | Do not expose room-specific access patterns | Is this a managed door, a non-logging door, or outside the lock scope? |
A privacy-mode door lock is not a device that removes physical access control. It is a proposed configuration for a door where the operator has decided that electronic transaction logging is unnecessary or inappropriate. Bid each privacy mode as a room-level setting with its own test, rather than assuming one software switch can be applied uniformly across the building.
Door approach, corridor swing, latch movement, closer force, and emergency hardware must also be resolved as part of the opening design. They should not be left to the lock supplier by implication.
CONFIRM-WITH-LOCAL-CLINIC-OPERATIONS-REVIEWER: Confirm the room-level access, privacy, emergency-opening, and corridor-clearance requirements with the clinic operator and its qualified local reviewers.
CONFIRM-WITH-LOCAL-ACCESSIBILITY-AND-EGRESS-REVIEWER: Confirm the applicable door, egress, accessibility, and hardware requirements for each exact opening with the local authority and qualified reviewers.
4. Door-fit survey and retrofit instructions
Commission the survey before selecting the direct-connect or cylindrical-body route. The Office Smart Lock Site Survey provides a field-measuring framework, while the Smart Lock Retrofit Site Survey is the appropriate companion for existing doors. Give the same survey form to every bidder so each response is based on the same physical evidence.
| Survey field | Measurement or record required | Decision use |
|---|---|---|
| Door leaf | Material, thickness, edge condition, handing, and swing | Determines allowable case, panel, and surface treatment |
| Frame and rebate | Internal dimensions, depth, alignment, and fixing positions | Determines reuse, modification, or replacement |
| Backset and case | Existing dimensions and mounting arrangement | Tests cylindrical-body fit and retrofit disruption |
| Cylinder and rose | Diameter, projection, fixing, and key-access arrangement | Separates cylinder work from body selection |
| Spindle | Profile, length, engagement, and movement | Identifies adaptor and alignment requirements |
| Mortise case | Case dimensions and relationship to latch or deadbolt | Establishes whether the existing carrier can remain |
| Latch or bolt | Throw, faceplate size, and retraction | Confirms operation and strike compatibility |
| Strike keeper | Position, fixing, and engagement | Identifies reinforcement or replacement |
| Panel envelope | Projection, internal space, cabling route, and service access | Tests the proposed direct-connect assembly |
| Associated hardware | Closer, hold-open, panic bar, lever exit, or alarm interface | Prevents a lock-only selection from creating a door-interface conflict |
Turn the measurements into a cylindrical-body lock specification only when that body is actually under consideration. Copying a catalogue dimension into the site record without checking the dated product page for the specific SKU would turn a marketing description into an assumed fit. Likewise, a clinic door hardware retrofit schedule should separate retained, modified, removed, and new components rather than using “replace lock” as the entire instruction.
An illustrative records-room scenario can show how the survey changes the architecture choice. If the existing case, backset, strike, and spindle all match the proposed cylindrical body, the retrofit case may warrant a lower installation-disruption score. If the panel envelope or case interface does not match, a different direct-connect assembly may be easier to install. Neither outcome is predetermined; the drawings and sample determine it.
5. Power, communications, and service interfaces
For this tender, “direct-connect” describes the proposed relationship between physical lock components. It does not by itself establish how credentials are stored, how events are transmitted, or whether the lock operates during a network interruption. A medical office access control proposal must answer those questions independently.
| Technical question | Bidder response required | Acceptance evidence |
|---|---|---|
| Local operation | State which access functions continue without a network | Disconnect the network and repeat authorized and denied-access tests |
| Credential handling | Identify where credentials are issued, held, and revoked | Show the operational sequence without exposing sensitive records |
| Audit events | List the event types the selected configuration can capture | Compare the event list with the room schedule |
| Event time | Explain how device time is set and maintained | Demonstrate timestamp behavior in the sample |
| Network dependency | Identify gateways, controllers, applications, and required services | Provide an architecture diagram with data flow |
| Primary power | State the intended power arrangement and permitted service access | Verify on the sample and installation instructions |
| External power | State whether an external power override is offered and how it is accessed | Inspect and test any offered terminal |
| Service access | Explain which modules can be diagnosed or replaced without door removal | Perform a service-access demonstration |
| Software and updates | Identify management software, operator roles, and update method | Review dated documentation and a sample configuration |
Require the bidder to identify the exact proposed product and SKU. Any model-level dimension, battery arrangement, event capacity, reading characteristic, or interface statement must be checked against the dated product page for the specific SKU before it enters the award comparison. The same rule applies to samples: a working display unit does not replace the evidence needed for the quoted configuration.
6. Mechanical evidence schedule
A lock body is one part of an opening. Before calling a proposal a direct-connect lock body for clinics, require the bidder to explain how its case, cylinder, spindle, latch drive, panel, and associated door hardware form a coordinated assembly. A cylindrical-body proposal requires the same discipline, with particular attention to the distinction between the cylinder itself and the surrounding case.
| Item to inspect | Direct-connect evidence | Cylindrical-body evidence | Drawing or test required |
|---|---|---|---|
| Door leaf and frame rebate | Show panel and case footprint | Show bore, rebate, and case footprint | Dimensioned site drawing |
| Backset and mortise case | State whether a case is supplied or retained | Show backset, case, and carrier relationship | Cutout and installation drawing |
| Cylinder and rose | Define supplied cylinders, collars, and roses | Show how cylinder geometry relates to the body | Parts schedule and sample |
| Spindle | Show engagement and transfer of movement | Show spindle profile, length, and adaptor use | Alignment test |
| Latch or deadbolt | Show throw, retraction, and drive path | Show how each bolt type changes the case | Operational test |
| Strike plate and keeper | Show fixing and engagement | Show alignment with retained strike | Test door operation |
| Motor and latch drive | Identify enclosed, exposed, and serviceable elements | Identify motor position relative to case | Service procedure |
| Panel and control unit | Show service access and cable path | Show how panel connects to the separate body | Assembly drawing |
| Closer, hold-open, and escape hardware | Identify interference and movement limits | Identify compatibility with retained hardware | Integrated-door test |
| Fasteners and finishes | State fixing and finish scope separately | State fixing and finish scope separately | Installation and finish schedule |
The sample should include the proposed panel, body, cylinder, spindle, latch or bolt, strike, and relevant door hardware. If a component is supplied by another trade, name it, allocate its interface, and identify who signs off the combined test. That prevents a clean product demonstration from hiding an unresolved interface at the actual door.
7. Product evidence and bidder response form
The first-party catalogue contains 79 published models, which gives a buyer several potential architecture families to examine. Catalogue breadth does not establish clinic readiness, and a category label does not answer the body-fit questions in this matrix.
The named SLK-9936S hotel lock provides a useful component distinction. Its published record includes a 5-pin cylinder, 3-point latch, emergency mechanical access, and audit/event-record capability. The presence of a cylinder does not make it a cylindrical-body product, because the cylinder and the lock body are separate objects. This example is not a clinic recommendation. Confirm on the dated product page for the specific SKU before using its dimensions, records capacity, or other specifications in a procurement decision.
| Response field | Bidder entry required | Acceptable evidence |
|---|---|---|
| Manufacturer and bidder | Legal entity, manufacturing role, and contact | Company details and authorized signatory |
| Proposed model and SKU | Exact identifier and dated product-page reference | Dated product documentation |
| Architecture definition | Bidder’s meaning of direct-connect or cylindrical-body | Marked assembly drawing |
| Supplied components | Body, panel, case, cylinder, spindle, bolt, strike, and accessories | Exploded parts list |
| Door compatibility | Supported leaf, frame, case, backset, and panel conditions | Dimensioned drawing |
| Existing-door scope | Keep, modify, remove, or replace schedule | Survey-linked scope |
| Access credentials | Proposed credential methods by room | Configuration sheet |
| Audit configuration | Event types, retrieval, and no-log rooms | Sample event demonstration |
| Emergency behavior | Override, free-state, and associated hardware behavior | Physical test on sample door |
| Power arrangement | Primary power, service access, and offered alternatives | Wiring or installation diagram |
| Management architecture | Local, gateway, network, and application dependencies | Architecture diagram |
| Mechanical interfaces | Latch, bolt, strike, spindle, closer, hold-open, and escape hardware | Integrated-door test |
| Documentation | Drawing, installation guide, datasheet, and service instructions | Controlled document list |
| Quality evidence | Factory inspection and sample inspection records | Signed QA package |
| Installation scope | Site preparation, cabling, fixing, configuration, and handover | Responsibility matrix |
| Exceptions and exclusions | Every missing item or unresolved interface | Explicit exception schedule |
Require “not offered,” “supplied by others,” and “to confirm” to be used accurately. Blank cells hide commercial interfaces; an explicit exception lets procurement compare scope and ask a focused question before samples are produced.
8. Weighted award scorecard
Use the following procurement scorecard for locks after the room schedule and door survey are frozen. The architecture names receive no points. Points reflect evidence that the selected configuration satisfies the opening and operational requirement.
| Criterion | Weight | Rating evidence |
|---|---|---|
| Door fit and retrofit fit | 20 | Measured fit, modification scope, and integrated-door result |
| Access, audit, and privacy behavior | 15 | Room-level configuration and event demonstration |
| Mechanical and emergency-hardware interface | 15 | Case, spindle, bolt, strike, closer, hold-open, and escape test |
| Power and management architecture | 10 | Local operation, outage behavior, retrieval, and service access |
| Installation scope and site disruption | 10 | Clear responsibility matrix and realistic work sequence |
| Documentation and quality evidence | 10 | Controlled drawings, instructions, and signed QA package |
| Maintainability and support | 10 | Diagnostic access, replaceable modules, and support procedure |
| Commercial completeness | 10 | Complete offer with clearly stated exclusions and project-specific quotation |
Rate each criterion from zero to three: zero for an absent or contradictory response, one for an incomplete response, two for acceptable documented evidence, and three for clear evidence demonstrated on the sample. Multiply the rating by the criterion weight, add the results, and divide by four to obtain a score out of 100. Any unresolved emergency or egress fit should be sent back for clarification rather than averaged away as a weak score.
Publish the weights before opening the responses. Ask bidders to score their own evidence against the same criteria if that helps them identify gaps, but retain the procurement team’s scoring record. The quotation remains project-specific; this worksheet does not imply a published price or fixed commercial allowance.
9. Sample test plan and evidence capture
Require one representative sample per proposed body and panel combination, ideally installed in a mock-up that reproduces a difficult door from the survey. A loose panel on a display board cannot validate spindle alignment, case clearance, latch projection, cable routing, or associated hardware behavior.
| Test | Evidence to retain | Reason to reject or clarify |
|---|---|---|
| Door fit and operation | Clearance photographs, dimensions, and operating video | Binding, misalignment, uncontrolled gaps, or incomplete parts |
| Latch or bolt engagement | Strike, keeper, and frame engagement record | Misalignment or modified scope not declared |
| Spindle and handle action | Full-cycle operation on the sample door | Inconsistent movement or required field rework |
| Authorized and denied access | Dated configuration and event output | Behavior differs from the written response |
| Privacy-mode behavior | Opening, event, and retrieval demonstration | A room assigned no logging still produces the prohibited record |
| Audit configuration | Event list for each representative room type | Required events are absent or cannot be assigned |
| Network interruption | Local behavior and restoration sequence | Access or event behavior differs from the proposal |
| Power interruption | Lock state, recovery, and service instructions | Unsafe or unexplained state is not clarified |
| Emergency opening | Override and associated hardware demonstration | The complete assembly cannot perform the stated sequence |
| Door-control interaction | Closer, hold-open, and escape-hardware movement | Hardware interferes or requires an undeclared replacement |
| Cleaning and finish review | Surface identification and care instructions | No care information for the clinic’s cleaning process |
| Document reconciliation | Drawing, manual, sample, and SKU cross-check | The offered assembly does not match the approved schedule |
The sample report should identify the door dimensions used, the exact components fitted, the configuration applied, the tester, and each corrective action. Ask the bidder to repeat failed tests after correction. A revised verbal assurance without a new observation does not close the item.
For the adjacent, annotated view of body-specific attributes, use Direct-connect Versus Cylindrical Lock Body: Which Fits a Clinics and Medical Offices Door Programme. Keep the decision matrix and annotated comparison together in the evaluation file, but do not let one document’s terminology replace the other’s evidence.
10. Illustrative evaluation of two room types
The following is an illustrative evaluation, not a project case. A treatment room may require staff access while avoiding an electronic record of patient presence. A records room may require restricted credentials and a retrievable entry trail. The same building can therefore need different logging behavior even when the lock supplier, body family, and credential platform are shared.
In the treatment-room example, the required privacy behavior takes priority over the architectural label. A direct-connect proposal that cannot provide the approved no-log behavior receives a clarification or fails that room requirement, regardless of its physical simplicity. A cylindrical-body proposal may remain competitive if the case fits the existing door and its configuration supports the required behavior. If both proposals meet the room requirement, the retrofit survey determines which installation creates less unresolved work.
In the records-room example, the audit requirement carries more weight. The bidder must show which access events are captured, how they are retrieved, who can view them, and how the room is separated from broader building reporting. An existing cylindrical-body case may score well if it permits controlled retention and a clear retrofit scope. A direct-connect assembly may score better if it supports the management requirement but requires less door modification. The matrix records those distinctions; it does not pre-assign the winner.
These examples expose a common specification error: treating one audit policy as suitable for every opening. A clinic can satisfy its operational needs only when access control, privacy, emergency behavior, and door hardware are decided opening by opening. The body comparison remains useful because it identifies construction and service consequences, but it cannot make those room decisions for the operator.
11. Clarification schedule and release conditions
Issue clarifications before sample scoring. The same questions should go to every bidder, and responses should be added to the controlled procurement file rather than communicated separately.
| Clarification number | Question | Required response |
|---|---|---|
| C-01 | What does the bidder mean by direct-connect or cylindrical-body? | Written definition linked to a drawing |
| C-02 | Which components are supplied by the bidder, installer, and other door trades? | Responsibility matrix |
| C-03 | Does the proposed body fit the measured existing case? | Dimensioned comparison |
| C-04 | What door modifications are included? | Scope and exclusion list |
| C-05 | Which rooms use logged and no-log configurations? | Signed room configuration sheet |
| C-06 | Which events are captured and retrieved? | Event schema and sample output |
| C-07 | What remains available during network or power interruption? | Tested sequence |
| C-08 | How does the assembly interact with closer, hold-open, and escape hardware? | Integrated-door test result |
| C-09 | Which emergency opening sequence is offered? | Physical demonstration and instructions |
| C-10 | Which documents correspond to the quoted SKU? | Revision-controlled document index |
| C-11 | What remains unresolved after the sample? | Corrective-action register |
| C-12 | Which parts require special service access? | Maintenance procedure |
Before release, attach the completed room matrix, door survey, bidder response form, sample test plan, and signed clarification responses. Give each bidder the same issue date and identify any change before scoring. Use the Smart Lock Retrofit Site Survey to standardize site evidence, and use the Office Smart Lock Site Survey when the survey must cover new and retrofit openings in one programme.
Send the completed matrix, room-by-room access schedule, door drawings, and exact proposed configurations with the project-specific Request a Quote request. The quotation should identify any excluded components, site-work assumptions, and the dated documentation applicable to each offered SKU.

