Smart lock tooling cost is not one number on a quotation line. No number is hard-coded in the body. The buyer's job is to send a fifteen-clause tooling RFQ

ประกาศเมื่อ: ก.ย. 01, 2026

Smart Lock Tooling Cost

Smart Lock Tooling Cost — A Clause-Handbook Read of the Tooling-Cost Policy

Smart lock tooling cost is not one number on a quotation line. It is the result of a fifteen-clause tooling-cost policy assembled by the factory to match the program shape — lockbody platform, credential stack, finish band, software surface, mechanical-override path, audit retention, order volume, customization depth, and tooling-ownership posture — read clause by clause. This handbook walks a brand owner or procurement manager through those fifteen clauses in numbered order, names every tooling class each clause governs, marks where the product-page-documented SLK-9936S first-party spec block anchors the documentation-granularity yardstick, and routes every per-SKU tooling figure to documentation and to a dated written offer letter. No number is hard-coded in the body. The buyer's job is to send a fifteen-clause tooling RFQ; the factory's job is to itemize every tooling line; the trading company's job is to be tested against both.

Editorial note: this clause handbook is the tooling-cost companion to Smart Lock OEM Cost Breakdown, which walks the OEM cost-component stack at program level, and to Smart Lock Mold Cost, which treats the injection and die-cast mold subset in depth. The factory-side OEM/ODM program is documented at OEM/ODM program; the brand-launch path lives at Private-label program; the request-a-quote funnel sits at Request a quote.

Clause 01 — Definitions and scope of this tooling handbook

The clauses in this handbook govern the tooling-side conversation between a brand owner, an importer, a distributor, or a procurement manager and the smart-lock factory account team when the buyer's program introduces new tooling — or reactivates, repurposes, or shares existing tooling — across the lockbody, the credential stack, the mechanical override, the assembly line, the test lane, and the packaging line. Three terms are fixed for the rest of the handbook.

  • "Tooling" means the factory-side equipment, fixtures, jigs, dies, gauges, instruments, programs, patterns, marks, drawings, and ancillary documents that the supplier builds, owns, or commissions to manufacture, assemble, test, inspect, mark, and pack a smart lock SKU or program. Tooling is a superset of "mold"; a mold is one tooling class (typically injection or die-cast), not the whole policy.
  • "Tooling cost" means the supplier's itemized dated quotation for any of the tooling classes in Clause 04 — line by line, with the supplier-ownership posture named (factory-owned, brand-owned, shared, lease, refurbishment), the amortisation schedule named, the IP & confidentiality posture named, the failure-and-rework policy named, and the per-SKU routing rule (which spec figure anchors on the product page and which spec figure is factory-discretion) named.
  • "Smart lock program" means any ordering pattern in the buyer's pipeline that the supplier is asked to support — OEM color-and-finish program, ODM industrial-design program, private-label branding program, hotel chain-standardisation program, distributor replenishment program, integrator project consignment, refurbishment-and-replacement program, OEM-bridge framework program.

Anything the clauses call out that the buyer's program does not require is removed from the buyer's RFQ before it leaves the inbox. Anything the clauses call out that the buyer's program does require but the supplier's quotation does not itemize is a flag for revision. The buyer and the supplier both read the same fifteen clauses; the discipline is that no clause is silently skipped.

Clause 02 — First-party spec yardstick and the no-porting-across-models firewall

The only hotel-lock SKU in this handbook whose first-party spec block is published in the documentation is SLK-9936S, and its spec block is invoked exactly once, in this clause, as a documentation-granularity yardstick. Every other SKU in this handbook — SLK-9936G / SLK-9905A / SLK-9951TH / SLK-9962S, the RFTC/RF card-and-code legacy roster 118, 118E, 228, 230, 232, 238, 239, 253, 305, 306, 308, 309, 502, 620, 621, 911, 002, 019, 022, 2020, 760 (with stainless 019 / 022 / 309 noted as a class), the SLK-G200 glass-door lock, the B09 double-opening face-recognition glass lock, the SLK-8831 5-in-1 fingerprint/password/card/key/app lock, the SLK-1104 class narrow-edge 4-in-1, the SLK-3108 password lock, the cylindrical Tuya round-code lock, the 3D-face remote-intercom lock, the outdoor D11-D12-D15-ODS-DQ roster, the face 9L5-R-Q7-Future 1 roster, the 516 cat-eye / Q7 intercom / 4G roster, the cabinet 6-model family, the 37-model fingerprint family, the 18-model keypad family, the 9-model RFID family, the 10-model outdoor family, the 6-model face-recognition family, the 3-model glass-door family, and the 3-model video-camera family — carries a strict "check the model’s published specification" stamp. The firewall rule is deliberate: one SKU has one documented anchor in the article body; every other SKU is routed to supplier documentation in a dated offer letter.

Yardstick lineWhat is documented
Door thickness—
RFID credential mediumSLK-9936S figure (product-page-documented, anc: Mifare 1 @ 13.56 MHz
Read distance—
Read time—
Power source—
Battery operating cycles—
Audit / event records—
Cylinder class—
Latch class—
Body materialSLK-9936S figure (product-page-documented, anc: stainless steel + alloy
FinishSLK-9936S figure (product-page-documented, anc: multiple options
Emergency access—
Management softwareSLK-9936S figure (product-page-documented, anc: multilingual
Database modeSLK-9936S figure (product-page-documented, anc: standalone or centralized
Property classSLK-9936S figure (product-page-documented, anc: 1–5 star hotels

Cells marked — have no documented value in this article’s sources; obtain the figure from the supplier’s written specification.

This table is the documentation-granularity ruler. The buyer's job is to demand the same line granularity on every shortlisted SKU, not to assume the SLK-9936S lines port across. The factory's job is to fill the right-hand column for every line. The clause that catches a supplier quoting "the same as SLK-9936S" on a non-SLK-9936S SKU is the firewall itself. The companion mold-cost handbook (Smart Lock Mold Cost) holds the same firewall on its mold subset.

Clause 03 — Catalog position of the tooling policy

The catalog publishes 79 published models, 24 hotel locks, 9 RFID door locks, 37 fingerprint locks, 18 keypad locks, 10 outdoor locks, 6 face-recognition locks, 6 cabinet locks, 3 video-camera locks, 3 glass-door locks as FACT counts, on a 10+ year OEM/ODM factory sold into 80+ countries under quote-based commerce. The tooling-cost policy is the supplier-side answer to the question "what factory-side equipment does each of those catalog SKUs require to be manufactured, assembled, tested, inspected, marked, and packed?" The right reading of the catalog is not "one tooling policy fits all 79 SKUs"; the right reading is "every catalog position has its own tooling footprint, every program has its own delta, and the buyer's job is to ask for the per-SKU tooling delta rather than assume the catalog-tooling footprint". A buyer who treats the 24 hotel locks as a single tooling tier is reading a category, not a SKU; a buyer who treats a single RFTC/RF legacy part as identical to the SLK-9936S spec block has crossed the firewall in Clause 02.

The catalog numbers are FACT, not inferred; the per-SKU tooling figures are not. The right reading is: 79 SKUs is the candidate pool, the per-SKU tooling footprint is the supplier's job to fill, and the factory's job is to tell the buyer which of those 79 SKUs are active, in-stock, on-shelf or build-to-order, which share tooling with siblings, and which require program-specific tooling. When the buyer's RFQ lists more than one candidate SKU from the catalog, the factory quotation must mark the tooling-delta per SKU separately. A blended line ("smart lock program, mixed SKUs, mixed tooling") is a flag for revision.

Usage note. The OEM cost breakdown (Smart Lock OEM Cost Breakdown) names the program-level cost components and treats tooling as one line among many; the mold-cost handbook (Smart Lock Mold Cost) treats the injection and die-cast mold subset; this handbook treats the full tooling policy and is the parent document both refer back to.

Clause 04 — Tooling classes of the cost build

The tooling cost of a smart lock program is the sum of twelve tooling classes. Each class carries its own driver. Every supplier quotation that arrives as a single "tooling fee" line instead of twelve itemized lines has skipped at least one class — and the buyer cannot tell which.

ClassWhat it coversDriver the buyer names
1. Plastic-injection toolinghousing, escutcheon, battery cover, internal bracketsSKU count, housing variant, plastic grade, finish requirement
2. Zinc die-cast toolinghandle base, lockbody, gear-housingdie-cast surface grade, weight band, machining-after-cast posture
3. Stamping and metal-form toolingfaceplate, strike plate, internal latch plate, decorative trimstainless / alloy band, gauge, finish, plate geometry
4. Machining and CNC fixturesspindle interface, mortise pocket, cylinder boredoor class, retrofit matrix, mechanical-override posture
5. Assembly jigs and line-side fixturescable harness, motor-fixture, antenna-fixture, battery-rail fixtureassembly lane model, cycle-time target, defect-rate cap
6. RF and credential test fixturesRFID read-range fixture, NFC antenna fixture, BLE pairing fixture, fingerprint enrolment jigcredential stack, FCC/CE posture, antenna-band compliance
7. Mechanical and life test fixtureshandle-cycle jig, motor-life jig, lockbolt-cycle jig, free-rotation handle fixturecycle target, fail-state policy, AHJ requirement
8. Ingress and environment test fixtureswater-resistance jig, humidity chamber jig, salt-spray chamber fixture, temperature-cycling fixtureoutdoor-class posture, coastal-route posture, AHJ requirement
10. Inspection and measurement gaugescaliper and pin-gauge set, surface-finish gauge, torque wrench, go/no-go gaugefirst-article policy, in-process policy, AQL cap
11. Packaging and marking toolingfoam-insert die-cut tooling, laser-mark pattern, pad-print cliché, label-print plateinner-pack / master-carton / pallet stack, mark language, artwork version
12. Calibration and reference toolingmaster reference unit, golden sample, calibration card, encoder reference cardcredential encryption posture, audit-reconciliation cadence

This twelve-class architecture is the supplier's job to fill. The buyer's RFQ should name the twelve classes by row; the supplier's quotation should answer every row with line-item granularity; and any row the supplier skips is a clause-level flag the buyer reads against. The cross-link between Class 1 / Class 2 (injection and die-cast) and the mold-cost handbook (Smart Lock Mold Cost) is intentional — molds are a subset of tooling, not the whole policy. The cross-link between Class 11 (packaging and marking) and the packaging-cost handbook (Smart Lock Packaging Cost) is the same — packaging tooling is a subset of packaging cost.

Clause 05 — Injection tooling line items

The plastic-injection tooling class governs every plastic part the SKU requires — the front housing, the rear housing, the escutcheon, the battery cover, the credential-reader bezel, the internal cable brackets, the cable clip and the cover screw boss — and the buyer names the SKU count, the housing variant, the plastic grade (ABS, ABS+PC, PC, modified PC, nylon, modified PBT) and the surface-finish requirement each line demands. Five line items belong in this class.

  • Cavity count and layout. Single-cavity, 2-up, 4-up, 8-up cavity layouts drive per-shot cost and per-tool life differently; the supplier's quotation should name the cavity count per part and the cycle time per cavity.
  • Steel grade and tool life. The buyer should ask whether the tool is built in pre-hardened steel, through-hardened steel, or tool steel; what the nominal tool-life target is in shots or years; and how the supplier re-grinds or refurbishes the tool when the target is reached.
  • Surface finish class. The finish class (MT, EDM, VDI, SPI, or factory-specific) on each visible plastic part is named separately; mirror-finish on a black-front escutcheon is a different finish class than satin-finish on a glass-door bracket.
  • Slide, lifter, and side-action count. Slides and lifters are added per under-cut; the buyer should ask how many slides / lifters per tool and what the maintenance access looks like.
  • Hot-runner and cold-runner posture. Hot-runner systems reduce scrap and shorten cycle time but add a separate tooling line; the supplier's quotation should name hot-runner vs cold-runner per tool.

Usage note. Every injection tooling line item above resolves to a per-part documentation figure in the supplier's quotation. The buyer should refuse any quotation that aggregates the five line items into one "mold" number — that is the mold-cost firewall, treated in detail in Smart Lock Mold Cost.

Clause 06 — Die-cast and stamping tooling line items

The die-cast and stamping tooling class governs every metal-formed part the SKU requires — the handle base, the lockbody, the gear-housing, the faceplate, the strike plate, the internal latch plate, the decorative trim, and any metal-formed bracket that holds the credential reader, the cable harness, or the antenna — and the buyer names the metal grade (zinc alloy ZAMAK 3 / ZAMAK 5 / ZAMAK 7, stainless 304 / 316, aluminium 6061 / 6063, cold-rolled steel, hot-rolled steel, brass), the gauge, the surface finish, and the plate geometry each line demands. Five line items belong in this class.

  • Die-cast machine class. The buyer should ask the tonnage class the die-cast machine operates at (160 t, 280 t, 500 t, 800 t, 1,250 t), the cavity count per die, and the trimming-and-deburring posture the part receives after cast.
  • Stamping press class. The buyer should ask the press tonnage, the stroke rate, the die material (SKD11, DC53, carbide), the progressive-die vs transfer-die posture, and the part-per-stroke throughput.
  • Surface-finish and after-cast machining. The buyer should ask whether each part is left as-cast, machined-after-cast, polished, brushed, plated, PVD-coated, painted, electrophoretically-coated, or anodised — each surface-finish class adds a separate tooling or process line.
  • Tolerance class. The buyer should ask the dimensional tolerance per critical feature (latch engagement, cylinder bore, motor-fit pocket, antenna pocket) and the GD&T posture the supplier's inspection team grades against.
  • Tool-life and refurbishment schedule. The buyer should ask the nominal tool-life target in shots (for stamping) or parts (for die-cast), the refurbishment interval, and the refurbishment cost posture (amortised, separately invoiced, or shared).

Usage note. Die-cast and stamping tooling line items are typically the largest per-class tooling figure in the supplier quotation; they are also the class where the trading-company quotation most often blends the line items into a single "metal tooling" entry. A blended entry is a flag for revision.

Clause 07 — Assembly jigs and line-side fixtures

The assembly-jig and line-side fixture class governs every fixture the assembly line uses to position, hold, fasten, solder, crimp, glue, or inspect a sub-assembly — the cable-harness jig, the motor-fixture, the antenna-fixture, the battery-rail fixture, the credential-reader placement fixture, the PCB-staking fixture, the ultrasonic-welding jig, the laser-welding jig, the torque-controlled screwdriver bit-set, and the conveyor-side reject bin. Five line items belong in this class.

  • Cycle-time target per fixture. The buyer should ask the per-fixture cycle-time target and the per-station takt time the assembly line is built to; a fixture that runs at one minute versus ten seconds is a different line item.
  • Defect-rate cap per station. The buyer should ask the in-process defect-rate cap per station (parts per million or percent), the rework-loop posture, and the failure-mode-and-effects-analysis (FMEA) coverage per fixture.
  • First-off / last-off inspection policy. The buyer should ask how the supplier handles the first unit on the line (first-off inspection) and the last unit on the shift (last-off inspection); the policy is named separately and is a fixture-class line item.
  • Modular vs dedicated posture. The buyer should ask whether the fixture is dedicated to one SKU or modular across siblings; a modular fixture raises the per-SKU fixture cost but lowers the cross-program fixture footprint.
  • Changeover time and posture. The buyer should ask the changeover time per fixture (in minutes), the skill class required to perform the changeover, and the storage-to-ref line.

Usage note. The assembly-jig class is the class where the supplier most often claims "shared across programs" without documentation; the buyer's job is to ask for the shared-tool list by name and SKU.

Clause 08 — RF and credential test fixtures

The RF and credential test fixture class governs every fixture the test lane uses to verify the credential stack — the RFID read-range fixture, the NFC antenna fixture, the BLE pairing fixture, the fingerprint enrolment jig, the face-recognition enrolment jig, the palm-vein enrolment jig, the PIN-code entry fixture, the mobile-app pairing fixture, the mechanical-key override fixture, and any credential-encoder reference fixture used by the supplier's calibration team. Five line items belong in this class.

  • Credential-stack coverage. The buyer should ask how the test fixture covers every credential method the SKU supports; a SKU with RFID + PIN + BLE + fingerprint has four credential-method fixtures, not one.
  • Antenna-band posture. The buyer should ask the antenna-band posture the test fixture is calibrated against (13.56 MHz, 2.4 GHz, sub-1 GHz, NFC, UHF), the calibration cadence, and the calibration-evidence posture.
  • FCC / CE / regional posture. The test fixture class is the one most likely to invoke a regional certification body; the buyer should ask the supplier how the test fixture is built for each target region and whether the fixture shares a calibration trace to a national institute.
  • False-acceptance and false-rejection rate coverage. The buyer should ask how the test fixture exercises the false-acceptance-rate and false-rejection-rate posture of the biometric credential; the fixture class is not a calibration jig, it is a credential-grade test apparatus.
  • Audit-event reconstruction posture. The buyer should ask whether the test fixture captures an audit-event record per test cycle and how the audit-event is exported to the supplier's quality management system.

Usage note. The certification-cost handbook (Smart Lock Certification Cost) treats the cert-evidence file the supplier signs against; this clause treats the test fixture the supplier builds to generate that evidence. Both are required — neither substitutes the other.

Clause 09 — Mechanical, life, and environment test fixtures

The mechanical, life, and environment test fixture class governs every fixture the test lane uses to exercise the lock's mechanical envelope — the handle-cycle jig, the motor-life jig, the lockbolt-cycle jig, the free-rotation handle fixture, the cylinder-engagement fixture, the latch-engagement fixture, the water-resistance jig, the humidity-chamber jig, the salt-spray-chamber fixture, and the temperature-cycling fixture. Five line items belong in this class.

  • Cycle-target posture. The buyer should ask the cycle target the fixture is built to (10,000 cycles, 50,000 cycles, 100,000 cycles, 200,000 cycles), the cycle class (handle, motor, lockbolt), and the fail-state policy (catastrophic fail, non-catastrophic fail, performance-degrade).
  • Mechanical-load envelope. The buyer should ask the mechanical-load envelope the fixture exercises (axial pull, lateral pull, torque, impact), the load class (consumer-grade, commercial-grade, hotel-grade, AHJ-grade), and the test-fixture calibration posture.
  • Ingress-protection posture. The buyer should ask the IP class the fixture grades against (IP54, IP55, IP65, IP66), the test-duration posture, and the post-test inspection routine.
  • Environment-cycling posture. The buyer should ask the temperature-cycling range (cold soak, hot soak, thermal-shock), the humidity-cycling range, the salt-spray duration, and the post-test functional verification posture.
  • Sampling posture for first-article and AQL. The buyer should ask whether the test fixture is run on every unit, on a sampled subset, on a first-article-only basis, or on an AQL-defined subset; the sampling posture is a separate line item.

Usage note. The testing-cost handbook (Smart Lock Testing Cost) treats the testing-policy cost the supplier charges for running these fixtures; this clause treats the fixture-cost the supplier charges for building them. The two are not the same; the buyer should refuse a quotation that bundles them.

Clause 10 — Inspection, measurement, packaging, and marking tooling

The inspection, measurement, packaging, and marking tooling class governs every gauge, instrument, foam-insert die-cut tool, laser-mark pattern, pad-print cliché, label-print plate, and reference unit the supplier builds to inspect, mark, or package the SKU. Six line items belong in this class.

  • Calibration gauge class. The buyer should ask the caliper / pin-gauge / surface-finish-gauge / torque-wrench / go-no-go-gauge inventory and how the inventory is calibrated to a national institute.
  • First-article inspection posture. The buyer should ask whether the inspection tooling is run on the first unit of every lot, the first unit of every shift, or on a sampled subset.
  • In-process inspection posture. The buyer should ask the in-process inspection tooling class and the cadence.
  • AQL posture. The buyer should ask the AQL cap (1.0, 1.5, 2.5, 4.0) the inspection tooling grades against, the lot definition, and the reject-bin posture.
  • Packaging-tooling class. The buyer should ask the foam-insert die-cut tooling, the master-carton flute grade, the inner-pack stack, the pallet pattern, the ISPM 15 declaration posture, and the corner-board / stretch-wrap tooling.
  • Marking-and-label tooling class. The buyer should ask the laser-mark pattern, the pad-print cliché, the label-print plate, the serial-number scheme, the carton-mark language, and the artwork-version control posture.

Usage note. This clause is the bridge between the tooling policy and the packaging-cost handbook (Smart Lock Packaging Cost) and the inspection-policy handbook (where applicable). The supplier's quotation should name every line item in this clause separately; a quotation that bundles the six lines into one "packaging and marking" entry is a flag for revision.

Clause 11 — Tooling ownership posture

The tooling ownership class governs who owns the tool — the factory, the brand, a third party, a leasing company — and how the ownership posture is named in the dated written offer letter. Five ownership postures belong in this class.

  • Factory-owned tooling. The factory builds the tool, owns the tool, maintains the tool, and amortises the tool across the brand's program volume. The brand pays a tooling fee (or a tooling-amortisation schedule) per the dated offer letter.
  • Brand-owned tooling. The brand funds the tool, owns the tool, stores the tool at the factory under a tooling-storage agreement, and pays the factory for tooling use, tooling maintenance, and tooling refurbishment.
  • Shared tooling. The factory and the brand co-fund the tool; the brand's exclusivity is bounded by the tool-share clause; the supplier's quotation should name every program that uses the shared tool.
  • Lease tooling. A third party owns the tool and leases it to the factory and the brand; the brand's program pays a per-cycle or per-shot lease fee, not a tooling-amortisation fee.
  • Refurbished tooling. The factory re-activates a legacy tool from a previous program; the brand pays a refurbishment fee (not a new-tool fee); the supplier's quotation should name the legacy program, the refurbishment scope, and the post-refurbishment tool-life target.

Usage note. Tooling ownership is the clause most often written down to a single word ("buyer" or "factory") without documentation; the brand's job is to ask for the tooling-ownership clause in writing, dated, signed, and cross-referenced to the tooling-IP clause in Clause 13.

Clause 12 — Tooling amortisation posture and schedule

The tooling amortisation class governs how the supplier recovers the tooling cost across the program volume — whether the tooling is amortised into the unit price, separately invoiced as a tooling line, paid up-front, paid in milestone tranches, or funded by a third party. Five amortisation postures belong in this class.

  • Amortised into unit price. The tooling fee is folded into the per-unit quotation; the supplier's offer letter should show the amortisation ladder (how unit price steps down as cumulative volume crosses each amortisation rung).
  • Separately invoiced tooling line. The tooling fee is a separate line on the offer letter; the brand pays the tooling fee up-front or in milestone tranches (kick-off, first-article, pilot, mass-production) and the per-unit quotation is independent.
  • Up-front tooling fee. The brand pays the tooling fee in full at order confirmation; the per-unit quotation is independent.
  • Milestone-tranche tooling fee. The brand pays the tooling fee in tranches tied to factory milestones (kick-off, T1 sample, T2 sample, pilot run, mass-production); the supplier's offer letter should name the milestones and the tranche amounts.
  • Third-party-funded tooling. A leasing company, an OEM-bridge partner, or a factoring company funds the tooling; the brand pays a per-cycle fee; the supplier's offer letter should name the third party and the funding terms.

Usage note. Amortisation is the clause most likely to be written as "tooling fee to be agreed" — the brand's job is to insist on a named amortisation schedule in the dated written offer letter. A schedule the brand cannot audit at the next review is a flag for revision.

Clause 13 — Tooling IP, confidentiality, and tooling-protect clause

The tooling IP and confidentiality class governs who owns the intellectual property in the tool — the drawings, the programs, the patterns, the gauges, the calibration data, the artwork, the surface-finish reference — and how the supplier protects the brand's tooling IP across the program life. Five line items belong in this class.

  • Drawing ownership. The buyer should ask whether the brand or the factory owns the tool drawing; a brand-owned drawing is a different clause from a factory-owned drawing.
  • Program ownership. The buyer should ask who owns the CNC program, the laser-mark program, the pad-print program, the inspection program; ownership is named per program, not in aggregate.
  • Confidentiality posture. The buyer should ask the confidentiality scope (lockbody drawing, credential firmware, antenna pattern, brand artwork, supplier process know-how), the confidentiality term, and the cross-border posture (where the drawings are stored, who accesses them).
  • Tooling-protect clause. The buyer should ask how the supplier protects the brand's tooling — restricted-access tooling room, named-tooling inventory, tooling custody chain, third-party audit.
  • Tooling-removal posture. The buyer should ask how the tooling is removed if the program terminates, who pays for removal and shipping, and whether the tooling is destroyed, returned, or stored at a third party.

Usage note. Tooling IP is the clause most often left for the supply-agreement legal counsel to negotiate after the tooling RFQ is signed. The brand's job is to raise the tooling-IP clauses before the tooling RFQ is sent — not after. A quotation that does not name the tooling-IP clauses is a flag for revision at the RFQ stage, not at the supply-agreement stage.

Clause 14 — Tooling failure patterns and the rework policy

The tooling failure class governs how the supplier handles tool failure during the program life — a worn injection tool, a cracked stamping die, a fatigued test fixture, a drifted calibration gauge — and the corrected-action policy the supplier follows. Five failure patterns belong in this class.

  • Tool wear and refurbishment. The buyer should ask the tool-wear detection posture (in-process measurement, scheduled inspection, statistical process control), the refurbishment trigger (cycle count, dimensional drift, surface finish), and the refurbishment cadence.
  • Tool crack and replacement. The buyer should ask the tool-crack detection posture, the replacement-trigger, the replacement lead-time posture, and the replacement-cost posture (factory-absorbs, brand-pays, shared).
  • Test fixture drift. The buyer should ask how a drifted test fixture is detected (calibration drift, golden-sample result, control-chart excursion), the re-calibration cadence, and the re-calibration-cost posture.
  • Inspection gauge drift. The buyer should ask how a drifted inspection gauge is detected, the re-calibration cadence, and the re-calibration-cost posture.
  • Line-side reject and rework posture. The buyer should ask how the supplier handles a line-side reject — rework, scrap, return-to-supplier — and the rework-cost posture.

Usage note. The failure-and-rework clause is the clause most often undocumented at the RFQ stage and most contested at the post-shipment stage. The brand's job is to ask the supplier for the failure-and-rework clause at the RFQ stage; the supplier's job is to document the clause in the dated written offer letter.

Clause 15 — Illustrative scenario: a 250-room hotel-group fixture program

Consider an illustrative scenario: a 250-room hotel group rolling out a chain-standardisation program across three properties with two property classes (one 80-room resort, one 120-room business, one 50-room boutique), each property picking the SLK-9936S platform on the hotel-line catalog position (1–5 star hotels) with a brand-specific finish (brushed stainless, dark bronze, polished brass). The buyer writes an RFQ; the supplier's quotation is read against the fifteen clauses; every clause is filled or flagged. The read is illustrative — every per-SKU figure is routed to documentation.

ClauseQuestion the brand asksWhat the supplier's quotation must answer
01 DefinitionsWhich property class and which credential stack does the program cover?Hotel class, RFID + PIN + BLE credential stack, multilingual software, standalone database mode
02 YardstickDoes the supplier confirm the SLK-9936S yardstick and the per-SKU firewall?Y — yardstick is anchored on SLK-9936S only
03 CatalogWhich catalog SKU is the program anchored on?SLK-9936S as the platform; no SKU blended across the three properties
04 Tooling classesDoes the supplier name the twelve tooling classes?Y — twelve classes, each separately itemised
05 Injection toolingCavity count, steel grade, finish class, slide count, runner posture per part?Per-part line on the dedicated section of the offer letter
06 Die-cast and stampingTonnage class, cavity count, surface finish, tolerance class, tool-life target per part?Per-part line on the dedicated section of the offer letter
07 Assembly jigsCycle-time, defect-rate cap, first-off / last-off policy, modular posture, changeover posture per station?Per fixture line on the dedicated section of the offer letter
08 RF test fixturesCredential coverage, antenna-band posture, regional posture, false-acceptance posture, audit-event posture?Per credential line on the dedicated section of the offer letter
09 Mechanical / life / environment fixturesCycle target, load envelope, IP posture, environment-cycling posture, sampling posture?Per fixture line on the dedicated section of the offer letter
10 Inspection, packaging, marking toolingCalibration gauge class, FAI posture, in-process posture, AQL posture, packaging-tooling class, marking-tooling class?Per line on the dedicated section of the offer letter
11 Tooling ownershipWhich posture applies (factory / brand / shared / lease / refurbished)?Brand-owned tooling posture named in the offer letter
12 Amortisation postureWhich posture applies (unit-price / separately invoiced / up-front / milestone-tranche / third-party)?Milestone-tranche posture named with milestones
13 Tooling IPDrawing ownership, program ownership, confidentiality scope, tooling-protect clause, tooling-removal posture?Each item named in the offer letter
14 Failure patternsWear-and-refurbishment, crack-and-replacement, fixture-drift, gauge-drift, line-side reject-and-rework posture?Each item named in the offer letter
15 Scenario walkthroughCan every clause above be answered for each of the three properties separately?Y — three separate sub-quotations, one per property class

This scenario is illustrative. The right reading is not "every clause is filled with the same answer"; the right reading is "every clause is filled with a property-specific answer, every per-SKU figure is routed to documentation, every commercial term is routed to the dated written offer letter, and every clause that the supplier skips is a clause the brand reads against". The brand's job after the scenario is to send a fifteen-clause tooling RFQ; the supplier's job is to itemise every clause; the trading company's job is to be tested against both.

How to use these fifteen clauses on the buyer's side

The clauses above are read clause by clause, in numbered order. Five rules apply on the buyer's side.

  • Read in order. The clauses are sequenced by governance (definitions → yardstick → catalog → classes → line items → ownership → amortisation → IP → failure → scenario). Skipping a clause is the most common buyer mistake.
  • Send the clauses as the RFQ skeleton. The supplier's quotation is most useful when it answers the fifteen clauses in numbered order; the brand's RFQ should name the clauses by number.
  • Refuse blended lines. A quotation that blends two or more clauses into one line is a flag for revision; the brand should ask the supplier to re-quote with clause-level granularity.
  • Route every per-SKU figure to documentation. The article body asserts no per-SKU tooling figure; the supplier's offer letter and the dated product page are the only sources.
  • Route every commercial term to the dated written offer letter. Per-deal hygiene (per-tooling-line cost, per-amortisation schedule, per-ownership posture, per-failure-and-rework clause) belongs in writing, dated, and signed.

The factory-side program is described at OEM/ODM program; the brand-launch path is at Private-label program; the order-samples path is at Order samples; the request-a-quote funnel sits at Request a quote. The OEM cost breakdown (Smart Lock OEM Cost Breakdown) names the program-level cost components; the mold-cost handbook (Smart Lock Mold Cost) treats the injection and die-cast subset; this handbook treats the full tooling policy. None of the three substitutes for the others — the brand reads all three.

ตะกร้าสินค้าของคุณ
การใช้คุกกี้จะช่วยปรับปรุงประสบการณ์การใช้งานเว็บไซต์นี้ของคุณให้ดียิ่งขึ้น นโยบายคุกกี้
Chat on WhatsApp