A hostels rfq template that forces comparable supplier answers on dorm doors, battery changes, per-bed credential revocation and trolley damage.

ประกาศเมื่อ: มี.ค. 07, 2023

RFQ Template for Smart Locks for Hostels and Budget Lodging

RFQ Template for Smart Locks for Hostels and Budget Lodging

This piece looks at hostels rfq template at building level, because the specification follows the door, not the sector. A hostel group's request for quotation usually arrives as a single line: how much for one hundred and twenty dorm beds, and please quote your best price. Nothing in that line can be answered with a number. Behind it sit four kinds of door that behave nothing like each other, a building where the count of locks is set by the count of beds, and an operating model in which the person who changes a battery is either a guest with a screwdriver or nobody at all.

  • Sort the openings — sort the door population into classes that behave alike, starting from hostels rfq template
  • Classify each door — state what section bed needs before anything is quoted
  • Show the fit — record the measurement that closes hostels rfq template
  • hostels rfq template runs this sequence, and hostels is the record it produces.

This is why a hostels rfq template is worth writing rather than borrowing. It is the one document where the multiplication that decides the programme gets set down: the price of a lock multiplied by the number of beds, the cost of a battery change multiplied by the number of beds, the time it takes to withdraw one bed's access, and the number of doors a luggage trolley hits over a season. A request that leaves those four out comes back as two quotations that look like the same product at two different numbers, and the difference surfaces at handover, when the cheaper set turns out to need a technician at the door every time a guest is handed fresh cells.

What follows is a template built to be filled in rather than admired. Each section states three things: what the clause decides, what a comparable answer contains, and what a weak answer sounds like. The third matters most, because hostel rounds rarely fail through withholding. They fail because two suppliers answered two slightly different questions and the buyer cannot tell which answer addresses the one that was asked.

Direct answer. A hostels RFQ template is a clause book, not a form letter. It runs nine clause sections — bed and door schedule, battery and continuity, per-bed credential and season reset, door leaf and handle, staff and out-of-hours access, event records, escape and alarm interface, fit evidence and spares, and commercial basis. Two clauses decide the programme by themselves: the battery-change clause, which sets whether a cell change costs a guest five minutes or a technician a call-out, and the per-bed revocation clause, which sets whether a shared dorm door can be cleared of one guest without anyone walking to that door. Every other section exists to make those two answers checkable.

The published Hotel Smart Lock RFQ Guide sets out the request structure in general terms. What follows narrows it to a building whose unit of purchase is a bed rather than a room.

Why Two Hostel Quotations Cannot

A hostel quotation round normally starts with a bed count and ends with a number per lock, and nothing in between connects the two in a way the buyer can audit. Four pressures belong to this vertical alone, and each turns a small difference between two suppliers into a large difference between two programmes.

PressureWhat it multipliesWhere two quotations quietly diverge
The lock count follows the bed countEvery unit figure becomes a per-bed figure in disguiseOne supplier quotes the dorm door; the other quotes the private room
The battery change happens at the doorThe number of changes a year across every leafOne supplier assumes a duty manager; the other assumes a technician visit
One dorm door serves several bedsThe number of credential changes a seasonOne supplier scopes a credential to a room; the other scopes it to a bed
The leaf takes trolley impactThe replacement rate of the door setOne supplier offers a mortise body; the other offers a surface-mounted body

The first of these is a units problem and the second is a labour problem, and they arrive in the same envelope and get read as the same thing. A supplier who quotes a lock that a guest opens with a code and a duty manager services with a screwdriver has made a different offer from one who quotes the same lock assuming a technician carries the annual battery round. Only one of those survives a building where nobody is on site at eleven at night.

The third pressure decides whether the template works at all. A dorm door serving eight beds is not a room door with a number on it. It is a shared control point, and the credential that opens it has to be withdrawable at the level of a single bed, from somewhere other than the door itself. If the answer to "can one bed's access be withdrawn without walking to that door" is no, then the property has two options and both are expensive: the dorm door stays open to whoever last held the code, or somebody is dispatched to the door on every departure.

The fourth pressure is physical, and it is the one most often left out. A hostel leaf takes an impact from a luggage trolley, and the failure point is the part of the door set that takes the hit rather than the part that holds the credential. That belongs in the template as a question about the escutcheon, the latch and the handle arrangement.

All four are known before any supplier is contacted, which is why they belong in the request rather than the reply. The template pushes each pressure into a field a supplier has to fill in. A field is binary — answered or not — and two suppliers answering the same field can be compared. A paragraph of context cannot.

The Template in One View

The template has four parts, and they only work together. The cover sheet carries the identity of the request and the rules of the response: the property, the door classes in scope, the bed count behind each shared door, who is answering, the date the answers are needed by, the currency and delivery term to use, and one instruction — answer every numbered clause, and where a clause does not apply to a door class, write the reason rather than deleting the line. The clause book is the nine sections below, each numbered, each in a fixed order, each asking for a field rather than an essay.

The annexes are the two documents the buyer attaches: the bed-and-door schedule, completed by the property, because a supplier cannot price a door class the buyer has not counted; and the response rules, which state what makes an answer usable. The response format is a table with one row per clause and one column per supplier. That last part is the one most requests omit: answers typed into a supplier's own layout arrive in that supplier's order, and two documents in two orders cannot be laid side by side without re-typing them into a spreadsheet, where a weak answer quietly becomes indistinguishable from a strong one.

Here is the clause book as a supplier sees it on the first page.

mindmap
  root((Hostel RFQ clause book))
    Bed and door schedule
      Beds served per shared door
      Door count per class
      Leaf thickness and material
      Existing hardware disposition
    Battery and continuity
      Who changes the cells
      Low battery indication
      Flat battery entry route
      Cell type and holder
    Per-bed credential
      Bed scoped credential
      Revocation without a door visit
      Season boundary reset
      Staff master across a season
    Door leaf and handle
      Handle arrangement both faces
      Latch and deadbolt
      Propped door behaviour
      Trolley impact exposure
    Staff and out of hours
      Duty manager credential
      Master scope and custody
      Contractor window
    Event records
      Fields captured
      Who may read them
      Retention owner
    Escape and alarm
      Escape route openings
      Fire door interface
      Alarm release path
    Fit evidence and spares
      Dimension drawings
      Spare part list
      Commissioning owner
    Commercial basis
      Price basis per door class
      Currency and delivery term
      Consumables inclusion

Read it once as a property manager and once as a supplier and the shape of the request becomes clear. The upper branches change the programme; the lower branches change the paperwork. Both are needed, because a quotation missing a consumables line is as unpriceable as one missing a revocation method.

Section A — The Bed and Door Schedule, and the Denominator It Fixes

What this clause decides. Everything downstream. A per-bed figure that looks attractive and a per-door figure that looks expensive are often the same number multiplied differently, and the template removes the ambiguity by making the buyer state the denominator before anyone quotes against it.

What a comparable answer contains. The schedule is completed by the buyer, not the supplier: door class; the number of beds served behind that door, where it is a shared door; the number of doors in that class; leaf material and thickness; the existing lock or handle that stays or goes; who is expected to open it in normal operation; and whether it sits on an escape route or on a door set with published documentation.

What a weak answer looks like. A single applicable leaf thickness range covering the whole building, with no split by door class. A bed count returned in the door count field. A treatment of the reception counter, the luggage store and the dorm door as one class, because in a spreadsheet they are all "doors" and in a building they are three different pieces of hardware.

Door class in a hostelBeds behind the doorWho opens it in normal useWhat the schedule must fix
Dorm or shared room doorBetween four and twelveGuests holding a bed-scoped credentialDoor count, bed ratio, whether one credential covers one bed
Private room doorOneThe guest, then housekeepingLeaf thickness, and whether the private door needs a different body from the dorm door
Reception counter or staff doorNoneStaff onlyWhether it is alarmed or monitored, and how it is released from outside
Luggage storeNoneStaff, sometimes a guest with a tokenLeaf and lock construction, and whether the store is on the escape route
Corridor, stair and common areaNoneStaff and guestsWhether the leaf is held open in normal use, and by what

Two warnings sit under that table. The bed count is not the door count: a dorm of eight beds is typically one door, not eight, and a quotation built on a per-bed door assumption will look spectacularly cheap and be physically impossible. And the luggage store and reception counter are where a retrofit quietly acquires doors nobody counted, because they were not on the room list.

The fit measurement belongs to separate work: the published Smart Locks for Hostels and Budget Lodging: Door Survey and Fit Reality covers how to collect the per-leaf fields. This clause only asks the supplier to respond to the schedule the buyer has already filled in.

Section B — Battery Change, and Who Actually Does It

What this clause decides. Whether the building carries a maintenance line or a labour line. This is the vertical's first question — what is the cost of the battery change and who does it — and it is the question most often left implicit, because a quotation line reads "lock with battery alert" and stops.

What a comparable answer contains. For each proposed model: the cell type and quantity; whether the cells can be changed by a non-technician at the door without removing the lock from the leaf; whether a tool is needed and which one; how the lock indicates a low battery and at what point in the remaining life; what happens to the door when the cells are flat; whether an external power provision can open the door from outside; what the lock does when the cells are removed entirely; and whether cells or a spare set are included in the delivery.

What a weak answer looks like. A quoted cycle count with no definition of a cycle. A figure for how many months the battery lasts, assuming a number of daily openings that is stated nowhere. A low-battery alert with no answer on whether it appears on the lock, at the door, in the management software or in all three — which decides whether a duty manager learns about it before a guest does.

flowchart TD
    A[Low battery indication reaches someone] --> B{Seen before the door fails}
    B -->|Yes| C[Duty manager changes cells at the door]
    C --> D{Cells can be changed at the door}
    D -->|Yes| E[Door back in service within the shift]
    D -->|No| F[Engineer visit raised]
    B -->|No| G[Guest reports a dead lock]
    G --> F
    F --> H[Call-out cost per door per year]
    E --> I[Consumable cost per door per year]
    H --> J[Multiplied across every bed]
    I --> J

The two paths out of that diagram cost differently, and the difference is the reason the clause exists. On the left, a change is a consumable and an hour of someone's time. On the right, it is a call-out multiplied across every door in a property with hard use and near-constant turnover. The published RFID Hotel Lock Battery Life covers the measurement side and Smart Lock Low Battery Warning covers how the indication is specified, so this clause can stay on the labour question.

One product-shaped point belongs in the buyer-side notes rather than the reply. A first-party spec block published for the SLK-9936S records battery operating cycles above fifteen thousand, and the published rows for the hotel card family record a four AA alkaline supply and, for several models, a low-battery alert as standard. Confirm on the dated product page for the specific SKU before treating any of it as a change interval. A cycle count is not a calendar interval until somebody defines what a cycle is, and the answer to that definition — a code accepted, a card read, a handle lifted — is what determines the visit count.

Field the template asks forWhat it decidesWeak answer
Cell type, quantity and holder designWhether a spare set fits in the property's drawerA single figure with no cell type named
Who can change the cells, and whereWhether a change is a consumable or a call-out"The batteries are user-replaceable" with no location
Low battery indication, and where it appearsWhether the failure is foreseeableA cycle count only
Behaviour on flat cellsWhether the guest can still get out"Not applicable", or silence
External power provision for entryWhether an engineer needs to carry a keySilence
Cells included in the deliveryWhether the first change is already budgetedA single figure for the whole order

Section C — Per-Bed Credential, and the Reset at the Season

What this clause decides. Whether the shared-key problem is solved by hardware or by walking round the building with a clipboard. One dorm door serves four to twelve beds, so the credential that opens it is held by a group, and a departing guest's access has to be withdrawable without a technician and without a visit to the door. The same machinery must survive a season: staff credentials issued in April have to still be controlled in October, when most of the people who held them have moved on.

What a comparable answer contains. Whether a credential can be scoped to a single bed rather than to a room or a door; whether one bed's credential can be withdrawn remotely or from a desk device without anyone going to the door; whether the withdrawal leaves a record and what the record shows; how a credential is voided at the end of a season and re-issued for the next one, and whether that reset needs a specialist on site; how a lost credential is dealt with; what a guest with no phone receives; and whether the credential type is a card, a code, a fingerprint, or a choice of them.

What a weak answer looks like. A capacity figure — how many credentials the model holds — presented as though capacity were control. A password changed from an app with no statement of what happens to the physical item already in a guest's pocket. A reset described as a technician visit. A staff credential described as an all-doors master with no answer on how it is closed out when the holder leaves.

stateDiagram-v2
    [*] --> Issued
    Issued --> Active: bed allocated to a guest
    Issued --> Withdrawn: never collected
    Active --> Suspended: access paused on request
    Suspended --> Active: access restored
    Active --> Withdrawn: bed vacated and cleared
    Withdrawn --> [*]
    Active --> Reissued: new season, new holder

The transition that carries the cost runs from Active to Withdrawn. If it can only be made by someone standing at the door, the property has bought a per-bed access control system with a labour cost attached to every departure, and no amount of credential capacity changes that. The published Smart Locks for Hostels and Budget Lodging: Credential Model that Survives Constant Credential Turnover works through the model choices behind that transition.

Field the template asks forWhat it decidesWeak answer
Scope granularity: bed, room, door or buildingWhether one guest's access can be withdrawn alone"Up to a stated number of credentials, depending on model"
Remote or desk-side withdrawalWhether clearing a bed costs a walk"Records are stored in the system", with no statement of control
Season boundary reset methodWhether the next season starts clean"Reset by contacting support"
Staff credential lifecycle across a seasonWhether a master outlives the person who held itAn all-doors master with no expiry route
Lost credential handlingWhether a missing card is an incident or an inconvenienceSilence
Credential for a guest with no phoneWhether the building has a fallbackSilence
Effect of withdrawal on the recordWhether the trail is trustworthySilence

Section D — The Door Leaf, the Handle and the Trolley

What this clause decides. The physical arrangement of the door set, which in a hostel is a control question before it is a hardware question. The misuse pattern in this vertical is the leaf, not the credential. A lever handle and a shared code invite two habits: the door gets wedged open so nobody has to find the code, and the code gets passed to the next person on the bunk. Both quietly dismantle the credential model the rest of the programme depends on, and both are answered by the handle, the latch and the deadbolt rather than by issuing a better number.

What a comparable answer contains. How the door is operated from inside and outside; whether the inside handle lifts the latch, throws a deadbolt, or neither; whether the body is a mortise or surface-mounted, and where the case sits in the leaf; how far the latch projects and what the supplier says about the door set's tolerance of a trolley striking it; whether the escutcheon sits proud of the leaf where a trolley or a bag would catch it; whether a closer, a hold-open device or an escape device is required at that opening, and which party supplies it; and whether the lock can be installed on a door that already carries a closer.

What a weak answer looks like. "Fits any standard door" with no thickness range and no leaf material. A model answer written for a mortise door when half the property's leaves are flush or glazed. Silence on the handle arrangement, which is the field the whole clause exists for. A body chosen for its credential features with no statement about what happens when a trolley hits the panel at speed.

Door set elementWhat the template asksWhy it matters in a hostel
Handle or lever arrangement, both facesWhether the inside handle operates the lock and from which sideA leaf that cannot be operated from inside gets propped, and a propped leaf makes the credential irrelevant
Latch and deadboltWhether the door latches without a handle lift, and whether a deadbolt is presentSeparates a door that holds its own from a door a guest must pull
Escutcheon positionWhether the panel stands proud of the leafThe proud edge is what catches a trolley or a bag
Mortise or surface-mounted caseWhere the lock sits inside the leafA surface case has less material to absorb an impact
Closer, hold-open and escape devicesWhich party supplies and fits themA door held open in normal use needs the arrangement stated
Leaf and frame conditionWhether the existing door can take the hardwareA retrofit that changes the door changes the fire and escape questions

The published Vandalism, Misuse and Environmental Load on Locks in Hostels and Budget Lodging covers the failure patterns behind these fields, so the request can stay narrow.

Section E — Staff Credentials, the Master, and the Route

What this clause decides. Who holds the credential that opens everything, and what happens to it when that person leaves. A hostel master credential has an awkward property: it is needed constantly, by whoever is on duty, and the person who needs it at eleven at night is rarely the person who held it at nine in the morning.

What a comparable answer contains. Whether the staff credential is issued to a role or to a named individual; whether it can be time-boxed to a shift or a day; how many people may hold it at once; what closes it out when the holder leaves and how quickly; how a contractor or cleaner is given a scoped window and how that window closes; whether the master is an electronic credential, a mechanical key, or both; and what the manual route is when a lock is flat and nobody on site can open the door.

What a weak answer looks like. "Master card" with no expiry, no holder list and no answer on how it is closed. An answer that treats a contractor's access as part of the same master scope. Silence on what the duty manager does at two in the morning, which is the moment the answer matters.

The emergency and out-of-hours arrangement is treated at length in Emergency and Out-of-Hours Access for Hostels and Budget Lodging, and the related credential categories are in the Hotel Smart Lock Master Key Management and Hotel Smart Lock Common Area Access guides.

Section F — Event Records, and the Question of Who May Read Them

What this clause decides. What the record has to prove. In a hostel the useful record is narrow: that a particular credential was withdrawn from a particular bed on a particular date, and that a particular door was opened by a credential that was valid at the time. Anything wider starts to generate records about guests that the property has no obvious reason to keep.

What a comparable answer contains. The event fields the model actually writes, quoted rather than described; where the record is held — on the lock, in the management software, or both; whether the lock keeps a record when the management side is unreachable; whether the event identifies a credential or a person, and how a shared credential is distinguished from a named one; how long the system keeps what, and on whose authority; and what happens to the record of a bed re-let to a different guest, so the previous guest's movement history does not become part of the new guest's file.

What a weak answer looks like. "Full audit trail" with no field list. A claim about logging that says nothing about storage location or retention period. An answer that does not notice the re-let case, which is the question the record is actually asked in this vertical.

CONFIRM-WITH-LOCAL-DATA-PROTECTION-REVIEW — what event data a budget-lodging operator may keep about identified guests, for how long, on what lawful basis, and who inside the property is accountable for it, is a determination for the operator's own data-protection reviewer and its advisers in the jurisdiction where the property operates. The template asks the supplier only what the hardware writes and where it writes it. The retention period, the lawful basis and the deletion schedule are not the supplier's to state.

The retention side is set out in Data Retention and Privacy for Smart Locks in Hostels and Budget Lodging, and the record architecture in Hotel Smart Lock Audit Log Management.

Section G — Escape Routes, Fire Doors and the Alarm Interface

What this clause decides. Whether the lock specification can be written at all before the building questions are answered. A hostel door is very often an escape door, often sits on a door set with published documentation, and often carries a closer. Adding an electronic lock to that opening changes the assembly, and the assembly is a question for the building authority, not for the lock catalogue.

What a comparable answer contains. From the supplier: whether the proposed model offers free egress from the inside without a credential; whether an emergency power provision exists so the door can be entered from outside when the cells are flat; whether the inside handle operates the lock without any electrical function; what the mechanical override is, if there is one, and who may use it; and whether the lock can be integrated with an alarm release or a building system. From the property: which openings are on an escape route, which are on a door set with published documentation, which have a closer, and which body is proposed for each.

What a weak answer looks like. A supplier who signs the escape and fire interface questions off without qualifying them, and a buyer who accepts that signature. A clause asking the supplier to "confirm compliance" with a standard the supplier does not own the interpretation of. Silence on the alarm interface, which in an older building is often what decides whether a new lock can be fitted at all.

CONFIRM-WITH-LOCAL-BUILDING-AUTHORITY — whether an electronic lock may be fitted to an escape door or to a door set carrying published documentation, what evidence that assembly requires, and which body signs the arrangement off, is determined by the building authority and the fire-safety reviewer for the property's jurisdiction and occupancy. The buyer's question to the supplier is narrow and factual: what does this model do on the inside of the door, and what does it do when the power is gone.

CONFIRM-WITH-LOCAL-FIRE-SAFETY-REVIEWER — whether the fire alarm releases a given door, and whether the lock interferes with the alarm interface or the closer, is a question for the fire-safety reviewer and the alarm contractor. The template records the question, who it went to, and the date it was answered.

Section H — Fit Evidence, Spares, and Who Puts the Lock

What this clause decides. Whether the quotation can be turned into an installation. A hostel programme usually has a local installer rather than the manufacturer's own fitters, so the evidence the supplier hands over is the whole of the installer's working knowledge.

What a comparable answer contains. The dimension drawing for the proposed model; the installation guide; the datasheet; the applicable door thickness range quoted per model rather than per family; the mortise and spindle dimensions; what the supplier considers out of scope for the installer; the spare part list — lock body, mortise case, spindle, battery holder, reader panel, handle set — with the identification method for each; how a spare part is ordered and what the expected interval is; whether the operator or the supplier holds the spares; and what commissioning evidence is issued per door after installation.

What a weak answer looks like. "Installation guide provided" with no drawings attached. A spare part list naming the model family rather than the part. No answer on who replaces a failed reader panel, which in a hostel dorm is the part most likely to be hit. A quotation that treats installation as a line without saying what the installer is being asked to do.

The supplier-side diligence that runs alongside this document is in the Hotel Smart Lock Supplier Evaluation Checklist and the Smart Lock RFQ Checklist for China Suppliers.

Section I — The Commercial Basis, Stated Without Numbers

What this clause decides. Whether the prices that come back can be compared at all. The request must not contain a price, and it must not contain a number a supplier can quietly treat as a target. What it does contain is the basis on which the answers should be priced, so that two suppliers are pricing the same thing.

What a comparable answer contains. The price basis stated per door class rather than as one blended figure; the currency; the delivery term; what is included in the line — cells, the desk-side device that issues credentials, the management software, mounting hardware, and any door set components supplied; whether the price for a dorm door and the price for a private room door are on the same basis; the pricing basis for spare parts; the period the quotation remains open; the warranty terms as written, and what they exclude; whether the battery is treated as a consumable or a warranted item; and whether a sample order can be placed against the quoted model.

What a weak answer looks like. One figure per project with no class breakdown, which makes the per-bed comparison the buyer has to do in reverse. A quotation excluding the management device, the software or the cells from the headline figure. Warranty terms expressed as a period without saying what happens to a door that fails at three in the morning.

The per-bed arithmetic that turns these lines into a programme figure is set out in Smart Lock Procurement for Hostels and Budget Lodging: The Price-Per-Bed Logic Route, and the running cost of the lock set over a season is handled in Hotel Smart Lock Total Cost of Ownership.

The Response Rules That Make Two Answers Line

These rules turn a set of quotations into a comparison. They go to the supplier with the clause book, and they fit on one page.

One row per clause. The response is a table with the clause number in the first column. A supplier who returns a document in their own layout has moved the work back onto the buyer, and the buyer will do it badly for the quotation that reads worst.

No clause may be deleted. If a clause does not apply to a door class, the answer is "not applicable to this class" with the reason. An instruction to skip what does not apply is where the useful answers get lost.

Model-specific answers only. An answer that covers the range rather than the model is not an answer to this clause. If a model has a field the supplier does not record, the answer is that the field is not recorded, not a silence.

Evidence attaches to the claim. A thickness range comes with the dimension drawing. A low battery indication comes with the behaviour stated in words. A reset method comes with the procedure.

Blanks are marked as blanks. "To be confirmed" carries an owner and a date. A blank nobody owns is the one that becomes a surprise at handover.

The same units throughout. One currency, one delivery term, one definition of what is included in a line. Two suppliers pricing on different bases is a presentation problem hiding a real difference.

Answer the question that was asked. A clause asking who changes the cells does not get an answer about battery life. The commonest substitution in hostel rounds is to answer the battery question with a figure, because a figure is easier to write than a procedure.

Name the authority where one is needed. Where an answer depends on a building authority, a fire-safety reviewer or a data-protection reviewer, the supplier states the model's behaviour and the buyer carries the question to the authority. A supplier cannot sign off a jurisdiction.

Scoring the Returned Quotations

Once the responses come back, the template earns its keep. The scoring below is not a corporate supplier scorecard. It is a way of finding out whether two answers are about the same thing, before any comparison of cost is attempted.

Mark each clause in each response: 2 means the answer is specific to the model or to this property and states the behaviour or the method; 1 means the answer is specific but leaves a decision open, or covers a family rather than a model; 0 means the answer is absent, generic, or addressed to a different question. A clause marked 0 by every supplier is one the buyer has to close alone before ordering. A clause marked 2 by one supplier and 0 by another is usually where the cost difference actually lives.

Clause group2 looks like1 looks like0 looks like
Bed and door scheduleAnswers each door class with its own basis and thickness rangeOne thickness range for the whole property"Suitable for standard doors"
Battery and continuityNames the cells, the changer, the alert and the flat-cell routeNames the cells and the alertA life figure only
Per-bed credentialStates remote withdrawal, season reset and staff lifecycleStates the reset method onlyA capacity number
Door leaf and handleStates the arrangement, the case type and the impact exposureStates the arrangement onlySilence on the handle
Staff and out-of-hoursStates expiry, closure and the manual routeStates expiry only"Master card"
Event recordsField list, storage location, re-let handlingField list only"Full audit trail"
Escape and alarmInside behaviour and flat-power entry, qualifiedInside behaviour onlyA compliance statement
Fit evidence and sparesDrawings attached, parts identified, commissioning namedDrawings attached"Documentation on request"
Commercial basisPer-class basis, inclusions named, terms statedOne figure with inclusionsA figure alone

Then put the two best responses side by side and answer one question before you open any number: is this the same scope? If one includes the desk-side device and the other does not, if one prices the dorm door and the other the private room door, if one includes cells and the other treats them as a consumable, then the two numbers are not a price difference. They are two different programmes, and the comparison only means something once the scope is identical.

Comparison stepWhat to put in the columnWhat a mismatch tells you
Scope of the priced lineDoors, devices, software, cells, mounting hardwareThe headline figures are not measuring the same thing
Door classes coveredDorm, private, counter, luggage store, common areaA cheap line is priced on the easy doors only
Battery route assumedWho changes the cells and whereThe gap between the two quotations is a labour gap
Credential scope assumedBed, room, door or buildingPer-bed revocation may not exist in one of them
Fit evidence suppliedDrawings, thickness ranges, parts listOne answer is a catalogue, the other a proposal
Authority questions handledNamed authority, date asked, answer receivedOne response has an unanswered egress question in it

A useful discipline is to mark, before the figures are opened, which clause groups you would pay more to get right. In most hostel programmes it is the battery clause and the per-bed credential clause, because those two set the recurring cost and the recurring labour. The published Smart Lock Vendor Selection Criteria for Hostels and Budget Lodging covers how the weighting is argued when more than one supplier looks close.

The Hardware Answers You Will Get Back

Suppliers will answer some clauses with catalogue data. Below is what our own published records currently say about the models most often put forward for hostel doors, quoted as they stand so they can be checked rather than remembered.

ModelAccess as recordedBody and mortise as recordedDoor fit as recordedPower as recordedPlatform as recorded
SLK-9936S RFID hotel card door lock, satin finishRFID/IC card standard, mechanical override standardStainless steel and alloy body, five-pin high-security cylinder, heavy-duty ANSI styleDoor thickness 36 to 100 mm, hotel wooden or metal doorsFour AA alkaline batteriesHotel lock management software with PC encoder and guest cards; standalone with PC-linked card encoder; unlock records listed
SLK-9905A RFID hotel lock with hidden card readerRFID/IC card standard, and no mechanical override line recordedStainless steel and alloy body, seven-pin high-security cylinderDoor thickness 38 to 100 mm, hotel wooden or metal doorsFour AA alkaline batteries, low-battery alert standardAs the row above
SLK-9951TH RFID hotel electronic door lockRFID/IC card standard, mechanical override standardStainless steel and alloy body, five-pin high-security cylinderDoor thickness 34 to 100 mm, hotel wooden or metal doorsFour AA alkaline batteriesAs the row above
SLK-9962S RFID hotel electronic door lock with slim handleRFID/IC card standard, mechanical override standardStainless steel and alloy body, five-pin high-security cylinderDoor thickness 36 to 100 mm, hotel wooden or metal doorsFour AA alkaline batteriesAs the row above
SLK-8831 five-in-one fingerprint keypad smart lockRFID/IC card, passcode, fingerprint and mechanical override, all standardZinc-alloy faceplate, stainless-steel mortise, mechanical anti-theft mortise with latch and multi security deadboltsDoor thickness 38 to 100 mmFour AA alkaline batteries, low-battery alert standardNo platform or network line recorded

Two rows carry more weight than the rest for a hostel, and they pull in opposite directions. The SLK-8831 row records a mechanical anti-theft mortise with a latch and multiple security deadbolts, which is the construction you would want on a leaf that takes a trolley impact; the same row records no platform or network line, so the credential questions have to be answered against the model itself. The SLK-9905A row records no mechanical override line at all, so on a door where a physical key is part of the answer, that model does not offer one. Absence is worth as much as a presence when a quotation is compared line by line.

The published pages for these models are the RFID hotel card door lock in satin finish, the RFID hotel lock with a hidden card reader and the five-in-one fingerprint keypad smart lock with app control.

When the Template Comes Back Filled

The property manager's problem was never the lock. It was a bed count with no door count attached to it, a battery change with no owner, a shared dorm door with no route to withdrawing one guest, and a leaf that takes the impact of the property's own luggage trolleys. That is now a document with fields in it, and the fields are the programme.

What you take away is the ordering. Fix the denominator before you read a price. Ask who changes the cells before you compare battery figures, because that answer is worth more than the figure it replaces. Ask whether one bed's access can be withdrawn from somewhere other than the door, because that decides whether the shared credential is a control or a convention. And treat a generic answer as a missing answer.

Send the completed bed-and-door schedule, the clause book and the two annexes as one document through the request a quote page, pull one physical sample to fit on the worst leaf in the population through order samples, and take the current model records through request-catalog so the lines you are comparing are the dated ones.

ตะกร้าสินค้าของคุณ
การใช้คุกกี้จะช่วยปรับปรุงประสบการณ์การใช้งานเว็บไซต์นี้ของคุณให้ดียิ่งขึ้น นโยบายคุกกี้
Chat on WhatsApp