Slk 9936g specification decode: decode the SLK-9936G data sheet into clear access, software, door-fit, power and sourcing checks for procurement teams.

Publié le: mars 29, 2023

What the SLK-9936G Data Sheet Actually Tells a Buyer

What the SLK-9936G Data Sheet Actually Tells a Buyer

A procurement manager often receives a specification sheet as though every line carries the same weight. For the SLK-9936G, the useful reading is more precise: some rows describe hardware, some describe management functions, and one leaves the operating environment unanswered. This SLK 9936G specification decode separates those layers so buyers can use documented facts without turning catalogue wording into unsupported promises.

Direct answer. Condensed to the essential point, slk 9936g specification decode turns a request into a decision record. slk 9936g specification decode and slk-9936g are the two parts of slk 9936g specification decode most often skipped. A slk 9936g specification decode describes how one component behaves under load. The datasheet makes claims. slk 9936g specification decode is what slk 9936g specification decode can be tested against.

  • Confirm the feature — confirm on the dated product page for the specific SKU behind slk 9936g specification decode
  • Confirm the constraint — record where the technology in slk-9936g stops working
  • Confirm the contingency — name the mechanical path that remains if slk 9936g specification decode fails
  • For slk 9936g specification decode, the order below is fixed and slk 9936g is the reference point.

The supplied record describes an RFID hotel card door lock with card access, a mechanical override, hotel lock management software, a PC-linked card encoder, a standalone operating arrangement, and guest-card administration functions. It also provides door, power, packing and finish data. Before any of those values drive a purchase decision, confirm on the dated product page for the specific SKU.

This article is therefore a decision aid, not a substitute for that dated record. It shows which questions each branch of the data sheet answers, which questions remain open, and what evidence a procurement file should contain before approval.

Start by separating stated values from buyer assumptions

A data sheet is strongest when each line is assigned an evidential status. The catalogue wording can establish what the manufacturer records. It cannot automatically establish suitability for every door, credential, operating environment or project workflow.

Document signalWhat it supportsSafe procurement use
Explicit catalogue valueA recorded hardware, fit, power or packaging attributeUse as a screening requirement, then verify the dated SKU record
Descriptive or operational wordingThe intended function or arrangement stated in the recordConvert into a test or written confirmation request
Blank or not-listed fieldNo usable value is supplied for that decisionTreat it as an open item rather than filling the gap with an assumption
Buyer inferenceA conclusion drawn from adjacent informationAccept only after documented evidence supports it

This distinction prevents a common buying error: treating a complete-looking table as complete evidence. A field may be populated while another field needed for the same decision remains blank. The correct response is not to average the record or choose the more convenient interpretation. It is to mark the branch as unresolved and assign an owner to close it.

The SLK 9936G specification decode decision tree

The practical decode follows five branches: access, software, network, physical installation, and operating conditions. Each branch ends in an evidence gate rather than an assumption.

flowchart TD
    A[Receive catalogue record] --> B{Dated SKU record attached}
    B -->|Yes| C[Compare stated fields]
    B -->|No| D[Request dated product page]
    D --> C
    C --> E[Access and credentials]
    C --> F[Software and records]
    C --> G[Network and issuing workflow]
    C --> H[Door fit and lock body]
    C --> I[Power and environment]
    E --> J{Acceptance evidence complete}
    F --> J
    G --> J
    H --> J
    I --> J
    J -->|Yes| K[Add approved configuration to purchase order]
    J -->|No| L[Keep branch on hold]

A branch reaches the approval gate only when the buyer has both the stated value and the supporting evidence needed for that project. For example, the recorded card standard opens the access branch, but a sample-card or workflow test may still be required. Likewise, a door-thickness range starts the installation check; it does not replace a site measurement.

Access branch: what the credential fields actually establish

The Access field lists RFID/IC card: Standard and Mechanical override: Standard. Capacity is recorded as Mifare-1 13.56 MHz cards. Together, these entries identify the intended access methods and credential family recorded for the model.

Catalogue fieldRecorded valueBuyer decision still required
Access methodRFID/IC card: StandardConfirm that the proposed guest-card format works with the specified reader and issuing process
Mechanical overrideStandardConfirm key-control, cylinder-keying and emergency-access procedures
Card capacity fieldMifare-1 13.56 MHz cardsConfirm the exact card subtype, encoding and sample-card acceptance

The record establishes that Mifare-1 13.56 MHz cards are the stated capacity. It does not establish that every card carrying a similar description will work in the project’s issuing system. Credential testing should cover the physical card, the PC encoder, the lock reader and the software workflow together.

Likewise, a mechanical override key is recorded, but its custody is a project decision. Procurement should ask who holds the override keys, how access is logged outside the card workflow, and whether the stated cylinder profile matches the site’s key-control plan.

The data sheet does not list a mobile app, remote unlock, fingerprint or passcode function for this model. Those methods should not be added to the project merely because they appear elsewhere in a broader smart-lock catalogue.

Credential and software branch: separate the encoder from the lock

The Platform field reads Hotel lock management software (PC encoder + guest cards). The Functions field lists guest card issuance, floor/room permissions, check-in validity windows and unlock records. This establishes the administrative functions named in the catalogue record.

Workflow stageRecorded functionEvidence to obtain
Card productionPC encoder and guest-card issuanceDemonstration using the intended card and encoder combination
Permission assignmentFloor/room permissionsSample showing how a guest, floor and room are assigned
Access validityCheck-in validity windowsDemonstration of start and expiry behaviour for a guest card
Activity reviewUnlock recordsSample record showing event content, storage location and export method

The software branch should be tested as a workflow rather than judged from a feature list. For example, a buyer may need to know whether card issuance requires the lock to be online, how a room change affects an active card, and whether unlock records can be exported for the property’s existing review process.

The catalogue wording does not specify every one of those points. For a detailed workflow comparison, use SLK-9936G Credential and Software Configuration Options.

Network branch: standalone operation needs a precise reading

The Network field states Standalone lock; PC-linked card encoder (no in-room network required). In plain terms, the model is recorded as a standalone hotel lock whose card-issuing function is handled through a PC-linked card encoder, without requiring an in-room network as part of the stated arrangement.

That sentence does several things at once. It identifies the lock as a standalone hotel lock, associates card production with the PC-linked card encoder, and identifies the absence of a stated in-room network requirement. It does not describe the behaviour of every site, every software installation or every optional workflow.

Network questionEvidence needed for approval
Must each guest room have network equipment?Written confirmation of the intended topology
Is the PC connected to the locks during ordinary card issuance?Workflow demonstration or configuration document
What happens if the PC or encoder is temporarily unavailable?Operating procedure supplied for the project
Are records retained only on the encoder or in another approved store?Configuration and sample export
Are remote or mobile operations required?Written requirement and evidence from the dated SKU record

The point is not to find a label that sounds simple. It is to understand which dependencies will exist after installation.

Body, cylinder and finish branch: read the descriptive fields

The Body & panel fields record the style as RFID Hotel Card Lock (Heavy-Duty ANSI), the material as Stainless steel + alloy, the mortise as a 5-pin high-security profile cylinder, and the finish as Gold brushed.

The style entry is a catalogue description. It is not a test report and should not be rewritten as independent approval. Likewise, the cylinder description identifies a profile and configuration; it does not establish a particular anti-picking, drilling or attack-resistance result.

Recorded elementProcurement interpretation
Stainless steel + alloyThe buyer is selecting a mixed-material body and panel construction as recorded
5-pin high-security profile cylinderCylinder profile is known, while project key-control details remain to be confirmed
Gold brushedThis finish is the recorded model configuration for comparison samples and drawings
RFID Hotel Card Lock styleThe intended form factor is recorded; exact panel geometry requires drawing evidence

Finish consistency can be controlled through the approval file. Compare the physical sample, dimension drawing, carton marking and purchase order so that “gold brushed” refers to the same visible configuration throughout.

Power branch: four cells are not a battery-life claim

The Power field states 4 × AA alkaline batteries. That is the only power-supply value supplied in the model record. It does not provide a battery-life period, operating-cycle count, replacement interval or low-battery behaviour.

The absence of a stated cycle figure is important. A buyer may calculate an operational maintenance allowance from device frequency, access volume and battery guidance, but that calculation remains an estimate until supported by the relevant product evidence.

Decision pointWhat the record suppliesWhat still requires evidence
Battery format4 × AA alkaline batteriesApproved battery type and replacement procedure
Service lifeNo cycle figure in the supplied recordProduct-specific guidance or test evidence
Low-battery indicationNot listedWhether and how the lock indicates a low battery
Electrical emergency entryNo USB terminal listedAlternative emergency-access procedure
Physical fallbackMechanical override is recordedKey-control and emergency-response process

Do not confuse the mechanical override key with an external electrical override. A physical fallback does not answer what happens when the batteries are depleted and the motor has no power.

Door-fit branch: use applicable door thickness as a range gate

The Door fit fields state a door thickness of 36–100 mm and list Hotel wooden / metal doors as the applicable door types. The applicable door thickness is therefore a range gate for initial screening, not proof that a particular leaf, frame or lock preparation will accept the lock.

The model record does not supply panel dimensions, backset, mortise dimensions, handing or a complete door-preparation drawing. Those items must come from the dimension drawings or a measured comparison.

A useful site worksheet checks:

  • Door-leaf thickness at the lock position, including any covering.
  • Frame rebate depth and the available space for the panel.
  • Backset and the positions of the latch, deadbolt and strike keeper.
  • Door handing, swing direction and any interference from a closer.
  • Space required for a hold-open device or an approved escape device.
  • Existing cylinder, strike plate and lock-case arrangement.

The door type wording is broad, so the metal-door case deserves particular care. A metal leaf can differ in rebate, reinforcement and handing even when its thickness falls inside the recorded range. Use SLK-9936G Door Fit Questions, Answered for Procurement Teams to structure the survey.

Packing branch: carton data serves logistics, not installation

The Packing field records a carton of 445 × 415 × 365 mm, with 6 pcs/ctn and a gross weight of 18.60 kg. These values support receiving planning and comparison with the project’s storage or forwarding arrangements.

Logistics useHow to use the recorded valuesLimitation
Carton-space checkCompare the carton dimensions with the intended storage routeThis is not the individual lock’s packaged footprint
Unit-count checkReconcile the stated six units per carton with received cartonsActual packing can change only through an approved revision
Weight checkUse the gross carton weight for handling planningIt is not a substitute for a complete shipping calculation
Label and identificationKeep SKU, finish and revision visible on receiving recordsThe data sheet does not state every label field

Do not infer container loading, pallet configuration or delivery interval from these three values. They are carton-level facts.

Environment branch: blank evidence must remain blank

The supplied Environment field is an em dash. It therefore supplies no value for weatherproof housing, operating temperature, operating humidity or outdoor suitability. The buyer should not fill this blank by transferring a similar model’s environment values or by treating the hotel-door classification as proof of exterior use.

Ask for evidence tied to the intended installation:

  1. Whether the lock will be in a protected interior or exposed entrance.
  2. The expected temperature and humidity range at that location.
  3. Any exposure to rain, dust, salt or cleaning chemicals.
  4. Whether the door is an exterior or boundary door under the project design.
  5. The test, product documentation or project evidence required for that placement.

Standards acceptance also belongs to the project, not just the product. Ask which authority or client standard governs guest-card format and which site evidence applies to door egress and installation.

CONFIRM-WITH-LOCAL-ACCESS-CONTROL: Verify the scope with the responsible local authority and the project’s qualified door-access professional, then retain the written acceptance requirement in the RFQ and purchase-order file.

An unanswered field remains a hold item, not an implied capability.

Documentation and OEM branch: decide what becomes contractual

The Services field lists dimension drawings, an installation guide and a full datasheet available on request. It also lists OEM/ODM options for custom logo, finish, packaging, manuals and product configuration for distributor and project orders.

These entries describe available documentation and project-level customization. They do not specify which drawing revision accompanies the current catalogue record, what options are already tooled or which changes alter the base model’s field values.

Document or optionBuyer questionRequired attachment
Dimension drawingsWhich revision applies to the ordered configuration?Drawing with SKU and revision identifiers
Installation guideDoes it cover the project door type and hardware arrangement?Current guide attached to the approval file
Full datasheetWhich fields replace or supplement the catalogue record?Dated model document
Custom logoWhere is it placed and what artwork format is required?Approved mark and placement drawing
Custom finishWhich finish sample and production reference govern?Physical approval and written description
Custom packagingWhich carton count, labels and manuals are included?Revised packing list and artwork proof

When a custom configuration changes a stated value, the purchase order should identify the change rather than merely saying “as agreed”.

The SLK-9936G specification checklist before quotation

This SLK-9936G specification checklist turns the data sheet into an evidence request. It is designed for a procurement file, an approval meeting or a written RFQ response.

CheckEvidence requiredHold when
Model identityExact SKU, finish and dated product recordThe response refers only to a product family
Card accessMifare-1 13.56 MHz card sample and encoder testCard subtype or encoding remains undefined
Mechanical overrideCylinder and key-control informationEmergency custody is unassigned
Hotel softwareIssuing and permission workflow demonstrationOnly a generic software screenshot is supplied
Validity controlCheck-in validity-window exampleExpiry behaviour is not demonstrated
Unlock recordsSample event and export methodStorage and retrieval are undefined
Network dependencyWritten topology for the standalone lock and PC encoderOperational dependencies remain assumed
Lock bodyDated drawing for the stainless steel and alloy constructionOnly a marketing image is supplied
CylinderConfirmation of the 5-pin high-security profile cylinderKey compatibility is untested
Door fitDimensioned survey against the 36–100 mm rangeA thickness number is given without door preparation
PowerBattery specification and low-battery procedureBattery life is presented without supporting evidence
EnvironmentProduct evidence for the intended locationThe blank field is silently treated as suitable
PackingCurrent carton dimensions, unit count and weightOnly the sales catalogue copy is attached
DocumentationDrawings, installation guide and full datasheetDocuments have no identifiable revision
Order captureApproved matrix and written deviations“As agreed” replaces specific values

For site measurement discipline, combine this checklist with Office Smart Lock Site Survey or Smart Lock Retrofit Site Survey. The decision is not complete merely because every table row has text. Each populated row still needs current, SKU-specific evidence.

Turn the branches into an approval matrix

A comparison matrix helps reviewers see which decision is ready and which remains conditional. Use green only when evidence is present, amber for an open evidence item and red for a direct contradiction.

BranchGreen evidenceAmber evidenceRed condition
AccessIntended card and encoder tested with the lockCard subtype or key-control detail remains openRequired credential conflicts with the recorded method
SoftwareIssuance, permissions, validity and records demonstratedStorage or export method needs confirmationRequired workflow is not in the approved configuration
NetworkIntended topology and offline procedure documentedSite dependency is still verbalProposal assumes an unrecorded network dependency
Door fitDrawing and site survey agreeOne preparation dimension needs checkingDoor falls outside the recorded range without an approved alternative
PowerBattery and emergency procedure documentedLow-battery evidence is pendingPlan depends on an unlisted electrical override
EnvironmentDated evidence covers the installation locationExposure definition is incompleteExterior suitability is inferred from an interior model
DocumentationDrawings, guide and data sheet are revision-controlledOne attachment lacks a revisionOrder relies on “as agreed” wording

Treat an unknown as amber, not as a zero score disguised as a failure. The purpose of the matrix is to locate work. An amber row names the missing evidence and its owner; a red row identifies a conflict that prevents the current configuration from satisfying the stated requirement.

Three illustrative buying paths

The following scenarios are illustrative decision paths, not completed customer cases. They show how the same catalogue record can lead to different procurement outcomes.

A wooden-door hotel refurbishment. The door falls inside the recorded 36–100 mm thickness range, so the project proceeds to a full survey. The buyer measures the frame rebate, backset, panel footprint and existing latch arrangement, then compares those dimensions with the supplied drawing. The result may be green, but only after the survey—not the thickness range—confirms the fit.

A metal-door project. The door type appears in the record, but the buyer still checks preparation and handing because those dimensions are not supplied. This branch remains amber until the drawing and site dimensions agree. The team should not use “metal door” as a substitute for a door-specific fit check.

A multi-property procurement file. The team separates the physical lock approval from the card-issuing workflow. One reviewer owns the door survey; another owns encoder, permission and record-retention evidence. The purchase-order draft then carries the approved configuration and every documented deviation. SLK-9936G Purchase-Order Checklist: What to Confirm Before Ordering provides the order-stage structure for that handoff.

Record unresolved items instead of filling them with assumptions

A useful data-sheet review ends with a short exception log. Each unresolved item should have an owner, the evidence required and the point at which it must close.

Unresolved itemEvidence ownerClose before
Exact model revision and finish referenceProduct or sourcing reviewerQuotation approval
Card subtype, encoding and sample-card resultAccess-system reviewerSoftware and reader acceptance
Lock panel, mortise, backset and handing drawingsTechnical reviewerDoor-schedule release
Record storage, export and retention methodSoftware reviewerWorkflow approval
Offline and encoder-availability procedureOperations reviewerInstallation handover
Battery replacement and low-battery procedureFacility-operations reviewerMaintenance plan approval
Installation-location environment evidenceTechnical reviewerProduct suitability approval
Mechanical-key custody and emergency processSecurity or facilities reviewerOrder release

This log prevents a blank field from becoming an oral assumption. It also gives suppliers a precise response request. When the evidence arrives, add it to the SKU-specific file and show which earlier assumption it replaces.

The buyer handoff: approve a record, not an inference

The SLK-9936G data sheet is useful precisely because it establishes a recognizable core: RFID/IC card access, a mechanical override key, hotel management functions, guest-card issuance, permission and validity controls, unlock records, a standalone lock with a PC-linked card encoder, defined door and power ranges, and documented carton data. Its limits are equally important. Environment data is absent, while several project-critical details remain outside the supplied record.

A procurement approval should therefore point to a dated product page, current drawings, the installation guide, a demonstrated credential workflow and a written resolution of every open branch. The purchase order should identify the approved configuration, selected finish, documentation revisions and any deviations. That creates a clearer handoff than repeating the data sheet verbatim without evidence.

The same question is worked through in more detail in smart locks for large office buildings. That is the same question slk 9936g specification decode has to answer here.The next step is to use SLK-9936G Purchase-Order Checklist: What to Confirm Before Ordering, attach the completed evidence matrix and request the missing SKU-specific records. The product is not approved because a catalogue row looks complete; it is approved when every material decision points to evidence the buyer can inspect.

The next step is to request a quote.

Vos fraisVotre panier
Votre expérience sur ce site sera améliorée en autorisant les cookies. Politique relative aux cookies
Chat on WhatsApp