What the SLK-9936G Data Sheet Actually Tells a Buyer
A procurement manager often receives a specification sheet as though every line carries the same weight. For the SLK-9936G, the useful reading is more precise: some rows describe hardware, some describe management functions, and one leaves the operating environment unanswered. This SLK 9936G specification decode separates those layers so buyers can use documented facts without turning catalogue wording into unsupported promises.
Direct answer. Condensed to the essential point, slk 9936g specification decode turns a request into a decision record. slk 9936g specification decode and slk-9936g are the two parts of slk 9936g specification decode most often skipped. A slk 9936g specification decode describes how one component behaves under load. The datasheet makes claims. slk 9936g specification decode is what slk 9936g specification decode can be tested against.
- Confirm the feature — confirm on the dated product page for the specific SKU behind slk 9936g specification decode
- Confirm the constraint — record where the technology in slk-9936g stops working
- Confirm the contingency — name the mechanical path that remains if slk 9936g specification decode fails
- For slk 9936g specification decode, the order below is fixed and slk 9936g is the reference point.
The supplied record describes an RFID hotel card door lock with card access, a mechanical override, hotel lock management software, a PC-linked card encoder, a standalone operating arrangement, and guest-card administration functions. It also provides door, power, packing and finish data. Before any of those values drive a purchase decision, confirm on the dated product page for the specific SKU.
This article is therefore a decision aid, not a substitute for that dated record. It shows which questions each branch of the data sheet answers, which questions remain open, and what evidence a procurement file should contain before approval.
Start by separating stated values from buyer assumptions
A data sheet is strongest when each line is assigned an evidential status. The catalogue wording can establish what the manufacturer records. It cannot automatically establish suitability for every door, credential, operating environment or project workflow.
| Document signal | What it supports | Safe procurement use |
|---|---|---|
| Explicit catalogue value | A recorded hardware, fit, power or packaging attribute | Use as a screening requirement, then verify the dated SKU record |
| Descriptive or operational wording | The intended function or arrangement stated in the record | Convert into a test or written confirmation request |
| Blank or not-listed field | No usable value is supplied for that decision | Treat it as an open item rather than filling the gap with an assumption |
| Buyer inference | A conclusion drawn from adjacent information | Accept only after documented evidence supports it |
This distinction prevents a common buying error: treating a complete-looking table as complete evidence. A field may be populated while another field needed for the same decision remains blank. The correct response is not to average the record or choose the more convenient interpretation. It is to mark the branch as unresolved and assign an owner to close it.
The SLK 9936G specification decode decision tree
The practical decode follows five branches: access, software, network, physical installation, and operating conditions. Each branch ends in an evidence gate rather than an assumption.
flowchart TD
A[Receive catalogue record] --> B{Dated SKU record attached}
B -->|Yes| C[Compare stated fields]
B -->|No| D[Request dated product page]
D --> C
C --> E[Access and credentials]
C --> F[Software and records]
C --> G[Network and issuing workflow]
C --> H[Door fit and lock body]
C --> I[Power and environment]
E --> J{Acceptance evidence complete}
F --> J
G --> J
H --> J
I --> J
J -->|Yes| K[Add approved configuration to purchase order]
J -->|No| L[Keep branch on hold]
A branch reaches the approval gate only when the buyer has both the stated value and the supporting evidence needed for that project. For example, the recorded card standard opens the access branch, but a sample-card or workflow test may still be required. Likewise, a door-thickness range starts the installation check; it does not replace a site measurement.
Access branch: what the credential fields actually establish
The Access field lists RFID/IC card: Standard and Mechanical override: Standard. Capacity is recorded as Mifare-1 13.56 MHz cards. Together, these entries identify the intended access methods and credential family recorded for the model.
| Catalogue field | Recorded value | Buyer decision still required |
|---|---|---|
| Access method | RFID/IC card: Standard | Confirm that the proposed guest-card format works with the specified reader and issuing process |
| Mechanical override | Standard | Confirm key-control, cylinder-keying and emergency-access procedures |
| Card capacity field | Mifare-1 13.56 MHz cards | Confirm the exact card subtype, encoding and sample-card acceptance |
The record establishes that Mifare-1 13.56 MHz cards are the stated capacity. It does not establish that every card carrying a similar description will work in the project’s issuing system. Credential testing should cover the physical card, the PC encoder, the lock reader and the software workflow together.
Likewise, a mechanical override key is recorded, but its custody is a project decision. Procurement should ask who holds the override keys, how access is logged outside the card workflow, and whether the stated cylinder profile matches the site’s key-control plan.
The data sheet does not list a mobile app, remote unlock, fingerprint or passcode function for this model. Those methods should not be added to the project merely because they appear elsewhere in a broader smart-lock catalogue.
Credential and software branch: separate the encoder from the lock
The Platform field reads Hotel lock management software (PC encoder + guest cards). The Functions field lists guest card issuance, floor/room permissions, check-in validity windows and unlock records. This establishes the administrative functions named in the catalogue record.
| Workflow stage | Recorded function | Evidence to obtain |
|---|---|---|
| Card production | PC encoder and guest-card issuance | Demonstration using the intended card and encoder combination |
| Permission assignment | Floor/room permissions | Sample showing how a guest, floor and room are assigned |
| Access validity | Check-in validity windows | Demonstration of start and expiry behaviour for a guest card |
| Activity review | Unlock records | Sample record showing event content, storage location and export method |
The software branch should be tested as a workflow rather than judged from a feature list. For example, a buyer may need to know whether card issuance requires the lock to be online, how a room change affects an active card, and whether unlock records can be exported for the property’s existing review process.
The catalogue wording does not specify every one of those points. For a detailed workflow comparison, use SLK-9936G Credential and Software Configuration Options.
Network branch: standalone operation needs a precise reading
The Network field states Standalone lock; PC-linked card encoder (no in-room network required). In plain terms, the model is recorded as a standalone hotel lock whose card-issuing function is handled through a PC-linked card encoder, without requiring an in-room network as part of the stated arrangement.
That sentence does several things at once. It identifies the lock as a standalone hotel lock, associates card production with the PC-linked card encoder, and identifies the absence of a stated in-room network requirement. It does not describe the behaviour of every site, every software installation or every optional workflow.
| Network question | Evidence needed for approval |
|---|---|
| Must each guest room have network equipment? | Written confirmation of the intended topology |
| Is the PC connected to the locks during ordinary card issuance? | Workflow demonstration or configuration document |
| What happens if the PC or encoder is temporarily unavailable? | Operating procedure supplied for the project |
| Are records retained only on the encoder or in another approved store? | Configuration and sample export |
| Are remote or mobile operations required? | Written requirement and evidence from the dated SKU record |
The point is not to find a label that sounds simple. It is to understand which dependencies will exist after installation.
Body, cylinder and finish branch: read the descriptive fields
The Body & panel fields record the style as RFID Hotel Card Lock (Heavy-Duty ANSI), the material as Stainless steel + alloy, the mortise as a 5-pin high-security profile cylinder, and the finish as Gold brushed.
The style entry is a catalogue description. It is not a test report and should not be rewritten as independent approval. Likewise, the cylinder description identifies a profile and configuration; it does not establish a particular anti-picking, drilling or attack-resistance result.
| Recorded element | Procurement interpretation |
|---|---|
| Stainless steel + alloy | The buyer is selecting a mixed-material body and panel construction as recorded |
| 5-pin high-security profile cylinder | Cylinder profile is known, while project key-control details remain to be confirmed |
| Gold brushed | This finish is the recorded model configuration for comparison samples and drawings |
| RFID Hotel Card Lock style | The intended form factor is recorded; exact panel geometry requires drawing evidence |
Finish consistency can be controlled through the approval file. Compare the physical sample, dimension drawing, carton marking and purchase order so that “gold brushed” refers to the same visible configuration throughout.
Power branch: four cells are not a battery-life claim
The Power field states 4 × AA alkaline batteries. That is the only power-supply value supplied in the model record. It does not provide a battery-life period, operating-cycle count, replacement interval or low-battery behaviour.
The absence of a stated cycle figure is important. A buyer may calculate an operational maintenance allowance from device frequency, access volume and battery guidance, but that calculation remains an estimate until supported by the relevant product evidence.
| Decision point | What the record supplies | What still requires evidence |
|---|---|---|
| Battery format | 4 × AA alkaline batteries | Approved battery type and replacement procedure |
| Service life | No cycle figure in the supplied record | Product-specific guidance or test evidence |
| Low-battery indication | Not listed | Whether and how the lock indicates a low battery |
| Electrical emergency entry | No USB terminal listed | Alternative emergency-access procedure |
| Physical fallback | Mechanical override is recorded | Key-control and emergency-response process |
Do not confuse the mechanical override key with an external electrical override. A physical fallback does not answer what happens when the batteries are depleted and the motor has no power.
Door-fit branch: use applicable door thickness as a range gate
The Door fit fields state a door thickness of 36–100 mm and list Hotel wooden / metal doors as the applicable door types. The applicable door thickness is therefore a range gate for initial screening, not proof that a particular leaf, frame or lock preparation will accept the lock.
The model record does not supply panel dimensions, backset, mortise dimensions, handing or a complete door-preparation drawing. Those items must come from the dimension drawings or a measured comparison.
A useful site worksheet checks:
- Door-leaf thickness at the lock position, including any covering.
- Frame rebate depth and the available space for the panel.
- Backset and the positions of the latch, deadbolt and strike keeper.
- Door handing, swing direction and any interference from a closer.
- Space required for a hold-open device or an approved escape device.
- Existing cylinder, strike plate and lock-case arrangement.
The door type wording is broad, so the metal-door case deserves particular care. A metal leaf can differ in rebate, reinforcement and handing even when its thickness falls inside the recorded range. Use SLK-9936G Door Fit Questions, Answered for Procurement Teams to structure the survey.
Packing branch: carton data serves logistics, not installation
The Packing field records a carton of 445 × 415 × 365 mm, with 6 pcs/ctn and a gross weight of 18.60 kg. These values support receiving planning and comparison with the project’s storage or forwarding arrangements.
| Logistics use | How to use the recorded values | Limitation |
|---|---|---|
| Carton-space check | Compare the carton dimensions with the intended storage route | This is not the individual lock’s packaged footprint |
| Unit-count check | Reconcile the stated six units per carton with received cartons | Actual packing can change only through an approved revision |
| Weight check | Use the gross carton weight for handling planning | It is not a substitute for a complete shipping calculation |
| Label and identification | Keep SKU, finish and revision visible on receiving records | The data sheet does not state every label field |
Do not infer container loading, pallet configuration or delivery interval from these three values. They are carton-level facts.
Environment branch: blank evidence must remain blank
The supplied Environment field is an em dash. It therefore supplies no value for weatherproof housing, operating temperature, operating humidity or outdoor suitability. The buyer should not fill this blank by transferring a similar model’s environment values or by treating the hotel-door classification as proof of exterior use.
Ask for evidence tied to the intended installation:
- Whether the lock will be in a protected interior or exposed entrance.
- The expected temperature and humidity range at that location.
- Any exposure to rain, dust, salt or cleaning chemicals.
- Whether the door is an exterior or boundary door under the project design.
- The test, product documentation or project evidence required for that placement.
Standards acceptance also belongs to the project, not just the product. Ask which authority or client standard governs guest-card format and which site evidence applies to door egress and installation.
CONFIRM-WITH-LOCAL-ACCESS-CONTROL: Verify the scope with the responsible local authority and the project’s qualified door-access professional, then retain the written acceptance requirement in the RFQ and purchase-order file.
An unanswered field remains a hold item, not an implied capability.
Documentation and OEM branch: decide what becomes contractual
The Services field lists dimension drawings, an installation guide and a full datasheet available on request. It also lists OEM/ODM options for custom logo, finish, packaging, manuals and product configuration for distributor and project orders.
These entries describe available documentation and project-level customization. They do not specify which drawing revision accompanies the current catalogue record, what options are already tooled or which changes alter the base model’s field values.
| Document or option | Buyer question | Required attachment |
|---|---|---|
| Dimension drawings | Which revision applies to the ordered configuration? | Drawing with SKU and revision identifiers |
| Installation guide | Does it cover the project door type and hardware arrangement? | Current guide attached to the approval file |
| Full datasheet | Which fields replace or supplement the catalogue record? | Dated model document |
| Custom logo | Where is it placed and what artwork format is required? | Approved mark and placement drawing |
| Custom finish | Which finish sample and production reference govern? | Physical approval and written description |
| Custom packaging | Which carton count, labels and manuals are included? | Revised packing list and artwork proof |
When a custom configuration changes a stated value, the purchase order should identify the change rather than merely saying “as agreed”.
The SLK-9936G specification checklist before quotation
This SLK-9936G specification checklist turns the data sheet into an evidence request. It is designed for a procurement file, an approval meeting or a written RFQ response.
| Check | Evidence required | Hold when |
|---|---|---|
| Model identity | Exact SKU, finish and dated product record | The response refers only to a product family |
| Card access | Mifare-1 13.56 MHz card sample and encoder test | Card subtype or encoding remains undefined |
| Mechanical override | Cylinder and key-control information | Emergency custody is unassigned |
| Hotel software | Issuing and permission workflow demonstration | Only a generic software screenshot is supplied |
| Validity control | Check-in validity-window example | Expiry behaviour is not demonstrated |
| Unlock records | Sample event and export method | Storage and retrieval are undefined |
| Network dependency | Written topology for the standalone lock and PC encoder | Operational dependencies remain assumed |
| Lock body | Dated drawing for the stainless steel and alloy construction | Only a marketing image is supplied |
| Cylinder | Confirmation of the 5-pin high-security profile cylinder | Key compatibility is untested |
| Door fit | Dimensioned survey against the 36–100 mm range | A thickness number is given without door preparation |
| Power | Battery specification and low-battery procedure | Battery life is presented without supporting evidence |
| Environment | Product evidence for the intended location | The blank field is silently treated as suitable |
| Packing | Current carton dimensions, unit count and weight | Only the sales catalogue copy is attached |
| Documentation | Drawings, installation guide and full datasheet | Documents have no identifiable revision |
| Order capture | Approved matrix and written deviations | “As agreed” replaces specific values |
For site measurement discipline, combine this checklist with Office Smart Lock Site Survey or Smart Lock Retrofit Site Survey. The decision is not complete merely because every table row has text. Each populated row still needs current, SKU-specific evidence.
Turn the branches into an approval matrix
A comparison matrix helps reviewers see which decision is ready and which remains conditional. Use green only when evidence is present, amber for an open evidence item and red for a direct contradiction.
| Branch | Green evidence | Amber evidence | Red condition |
|---|---|---|---|
| Access | Intended card and encoder tested with the lock | Card subtype or key-control detail remains open | Required credential conflicts with the recorded method |
| Software | Issuance, permissions, validity and records demonstrated | Storage or export method needs confirmation | Required workflow is not in the approved configuration |
| Network | Intended topology and offline procedure documented | Site dependency is still verbal | Proposal assumes an unrecorded network dependency |
| Door fit | Drawing and site survey agree | One preparation dimension needs checking | Door falls outside the recorded range without an approved alternative |
| Power | Battery and emergency procedure documented | Low-battery evidence is pending | Plan depends on an unlisted electrical override |
| Environment | Dated evidence covers the installation location | Exposure definition is incomplete | Exterior suitability is inferred from an interior model |
| Documentation | Drawings, guide and data sheet are revision-controlled | One attachment lacks a revision | Order relies on “as agreed” wording |
Treat an unknown as amber, not as a zero score disguised as a failure. The purpose of the matrix is to locate work. An amber row names the missing evidence and its owner; a red row identifies a conflict that prevents the current configuration from satisfying the stated requirement.
Three illustrative buying paths
The following scenarios are illustrative decision paths, not completed customer cases. They show how the same catalogue record can lead to different procurement outcomes.
A wooden-door hotel refurbishment. The door falls inside the recorded 36–100 mm thickness range, so the project proceeds to a full survey. The buyer measures the frame rebate, backset, panel footprint and existing latch arrangement, then compares those dimensions with the supplied drawing. The result may be green, but only after the survey—not the thickness range—confirms the fit.
A metal-door project. The door type appears in the record, but the buyer still checks preparation and handing because those dimensions are not supplied. This branch remains amber until the drawing and site dimensions agree. The team should not use “metal door” as a substitute for a door-specific fit check.
A multi-property procurement file. The team separates the physical lock approval from the card-issuing workflow. One reviewer owns the door survey; another owns encoder, permission and record-retention evidence. The purchase-order draft then carries the approved configuration and every documented deviation. SLK-9936G Purchase-Order Checklist: What to Confirm Before Ordering provides the order-stage structure for that handoff.
Record unresolved items instead of filling them with assumptions
A useful data-sheet review ends with a short exception log. Each unresolved item should have an owner, the evidence required and the point at which it must close.
| Unresolved item | Evidence owner | Close before |
|---|---|---|
| Exact model revision and finish reference | Product or sourcing reviewer | Quotation approval |
| Card subtype, encoding and sample-card result | Access-system reviewer | Software and reader acceptance |
| Lock panel, mortise, backset and handing drawings | Technical reviewer | Door-schedule release |
| Record storage, export and retention method | Software reviewer | Workflow approval |
| Offline and encoder-availability procedure | Operations reviewer | Installation handover |
| Battery replacement and low-battery procedure | Facility-operations reviewer | Maintenance plan approval |
| Installation-location environment evidence | Technical reviewer | Product suitability approval |
| Mechanical-key custody and emergency process | Security or facilities reviewer | Order release |
This log prevents a blank field from becoming an oral assumption. It also gives suppliers a precise response request. When the evidence arrives, add it to the SKU-specific file and show which earlier assumption it replaces.
The buyer handoff: approve a record, not an inference
The SLK-9936G data sheet is useful precisely because it establishes a recognizable core: RFID/IC card access, a mechanical override key, hotel management functions, guest-card issuance, permission and validity controls, unlock records, a standalone lock with a PC-linked card encoder, defined door and power ranges, and documented carton data. Its limits are equally important. Environment data is absent, while several project-critical details remain outside the supplied record.
A procurement approval should therefore point to a dated product page, current drawings, the installation guide, a demonstrated credential workflow and a written resolution of every open branch. The purchase order should identify the approved configuration, selected finish, documentation revisions and any deviations. That creates a clearer handoff than repeating the data sheet verbatim without evidence.
The same question is worked through in more detail in smart locks for large office buildings. That is the same question slk 9936g specification decode has to answer here.The next step is to use SLK-9936G Purchase-Order Checklist: What to Confirm Before Ordering, attach the completed evidence matrix and request the missing SKU-specific records. The product is not approved because a catalogue row looks complete; it is approved when every material decision points to evidence the buyer can inspect.
The next step is to request a quote.

