En 1906 smart lock RFQ clause: clause language for an EN 1906 smart lock RFQ that binds handle and knob furniture evidence to the ordered variant and keeps it.

Опубликовано: июн 29, 2023

The Handle Is Not the Lock: Writing EN 1906 Into a Smart Lock RFQ

The Handle Is Not the Lock: Writing EN 1906 Into a Smart Lock RFQ

What follows is a working reference on en 1906 smart lock rfq clause, written for the buyer who must sign the submittal. A smart lock request for quotation that names EN 1906 is normally written by somebody who believes the lock has been covered. It has not. EN 1906 is a standard for lever handle and knob furniture — the grip a hand turns to open the door — and a document issued against it speaks to the durability of operation, the strength, the corrosion behaviour and the security of that furniture. It says nothing about the mechanism that retracts the bolt, nothing about a cylinder where the design has one, nothing about the escape function, and nothing about the radio.

The failure this produces is quiet, which is why it survives to handover. A certificate arrives, it is filed against the lock line, and the enclosure is marked as evidenced. Nobody objects at quotation stage, because nobody is looking for an objection. The gap appears when a consultant asks for the evidence covering the locking function and finds the only document in the file covers the handle.

Direct answer. An EN 1906 smart lock RFQ clause is finished when it does two separate jobs: it binds the handle or knob tightly enough that a supplier cannot substitute a finish or a geometry without notice, and it is written so that it can never be read as evidence about the lock. This guide builds the clause slot by slot, names the companion clause that must sit beside it, and shows where the boundary sentence goes so the furniture document stays where it belongs.

This is written for the procurement manager who issues the request for quotation and who will be held to the evidence afterwards, usually by a consultant, a tender assessor or an internal auditor.

What EN 1906 covers, and what it will never cover

EN 1906 covers lever handle and knob furniture. Its subject is the furniture and the furniture's own behaviour under use: durability of operation, strength, corrosion and security. Check the published title and the scope statement against the current edition before relying on any wording about it, because standards are revised and the exact set of properties inside the scope is settled by the published text, not by a summary.

Two things follow, and they pull in opposite directions. The first is what you can write: if the request for quotation names the furniture and asks for the document that demonstrates it, the clause can be precise and a supplier can answer it without guessing. The second is what the naming must not be allowed to imply.

A lock is not one object. A battery-driven smart lock on a real door contains a handle or knob, a lock case with a driving mechanism, often a cylinder, an escape function, a radio module, a power source and a set of credentials. EN 1906 speaks to the first of those. The rest are separate questions with separate evidence, and the one the standard knows about is rarely the one anybody was worried about. What the specification covers is in the smart door locks.

The commercial consequence is a drafting decision. A clause written at the level of "the product" reads as covering everything on the door. A clause written at the level of "the lever handle and knob furniture" reads as covering exactly that. Both read fine on the page. Only the second one survives a question.

Two habits compound this. The first is mis-citation: templates in circulation reach for a door-hardware standard whenever a door appears on a schedule, and EN 1935 — a standard for single-axis hinges — is cited as though it were a latch standard. The second is substitution in the other direction: a buyer holding mechanism evidence assumes the handle arrived with it, and the furniture becomes an unevidenced part of the order.

CONFIRM-WITH-LOCAL-STANDARDS-BODY — the published title, scope statement and current edition of EN 1906 in the market you are supplying, and which edition and amendment your national implementation refers to at the date of your order. Clause-level claims must be routed to the published standard text.

The mistake, in one sentence

The mistake is buying a lever-handle certificate and treating it as lock evidence. It is worth writing out in full, because each half fails differently.

What the buyer believesWhat the document actually saysWhere the belief shows up
The lock is covered because the RFQ named EN 1906The document covers the furniture only — durability, strength, corrosion and security of the handle or knobThe evaluation sheet is ticked; the mechanism line has nothing behind it
One document per productOne document per object — furniture, mechanism, cylinder, escape, radio, environmentThe file looks complete and is short several parts
The document names the model, so it covers the modelA type entry may list several furniture variants on a common bodyA knob ships where a lever was quoted, against a document that never covered it
The supplier holds it, so the programme holds itThe holder may be unable or unwilling to confirm the scope laterThe question becomes unanswerable at handover
The lock is covered, so the handle is coveredA mechanism document says nothing about the furnitureThe furniture arrives unevidenced and nobody notices, because the enclosure was signed off

None of this is dishonesty. It is an artefact of silence at clause level. A clause that does not say which object it governs leaves the object to be inferred, and the person inferring is usually the reader with the least context: an evaluator working down a checklist at the end of a long tender, or an auditor reading the file after it was assembled.

The fifth row is the mirror image and it is just as expensive. A programme holding mechanism evidence often assumes the handle is covered, so the furniture is ordered without a document at all. One clause, correctly scoped, closes both directions: it says what the furniture document covers, and that the locking function is governed by a different clause with its own evidence.

The questions a smart lock door actually asks

Before a clause can be written, the door has to be broken into questions. This is the part that usually gets skipped, and it is the part that makes an EN 1906 clause work or fail.

graph TD
    Door["A smart lock on a real door"]
    Door --> Q1["Furniture question"]
    Door --> Q2["Lock mechanism question"]
    Door --> Q3["Cylinder question"]
    Door --> Q4["Escape function question"]
    Door --> Q5["Radio and EMC question"]
    Door --> Q6["Environment question"]
    Door --> Q7["Fire assembly question"]
    Q1 --> A1["EN 1906 document"]
    Q2 --> A2["EN 14846 or EN 12209 document"]
    Q3 --> A3["EN 1303 document"]
    Q4 --> A4["EN 179 or EN 1125 document"]
    Q5 --> A5["Destination market radio regime"]
    Q6 --> A6["Corrosion and ingress evidence"]
    Q7 --> A7["Assembly test evidence"]
    A1 -.-> Risk["Furniture document stretched to cover the rest"]
Question on the doorWhat is being askedWho answers itThe document that must exist
Handle and knob furnitureWill the grip survive daily operation, and does it resist being forcedEN 1906Report or certificate scoped to the ordered furniture
Locking mechanismWill the mechanism drive the bolt and latch under repeated operation and loadEN 14846 for an electromechanically operated lock, EN 12209 for a mechanically operated oneCertificate or report covering the electromechanical family
CylinderDoes the cylinder resist picking, drilling and wear, and how is it keyedEN 1303, or EN 15684 where the cylinder is mechatronicCertificate covering the cylinder type and key control
Escape functionCan the door be released from inside without a key, in one operationEN 179 for a lever-operated device, EN 1125 for a panic barCertificate for the device type named in the door schedule
Radio and electromagnetic compatibilityWhat the radio emits, and what it has to tolerate around itThe radio and electromagnetic regimes of the destination marketDeclaration and marking, with the test evidence behind them
EnvironmentWhat rain, salt and impact do to the outside faceIngress and impact ratings, corrosion test evidenceTest evidence matching the exposure that door has
Fire assemblyWhat happens when the door is part of a fire-rated assemblyThe fire-resistance test route for assembliesEvidence for the assembly with the hardware fitted

For a battery-driven smart lock, the electromechanically operated lock family is the closer fit for the locking function than the mechanically operated family, and EN 14846 is written for exactly that combination of mechanical and electrical locking. Treat the routing in this table as a routing table, not a compliance finding: check the published title and scope for each designation, and confirm the route your market applies to the specific product.

Eight slots in an EN 1906 clause

A clause is not a sentence. It is a set of bindings, and each binding can be empty. When a slot is empty, the missing content is supplied by the reader's assumption, and the reader's assumption is never written down anywhere you can correct it later.

Eight slots will carry an EN 1906 clause. The order below works because each one constrains the next: you cannot name a document before you know what it must cover, and you cannot name a milestone before you know what is being asked for.

SlotWhat it bindsWhat fills the gap when it is empty
1. RequirementWhich object, and which edition of which standardThe supplier picks the object and the document
2. ObjectThe designation, type, finish and geometry actually quotedThe supplier ships whatever sits under the designation
3. Document typeWhether a report, a certificate, a declaration or a marking is acceptableAnything with the right letterhead satisfies the clause
4. HolderWho issued the document and who can confirm itAn unverifiable number with no scope attached
5. EditionThe current published edition and any amendment in forceA document against an edition the market no longer uses
6. Scope coverageThat the type entry includes the ordered variantA certificate for a family that excludes the shipped item
7. Site and validityThe production site and what keeps the evidence true after the sample passedAn assertion that the certificate simply applies
8. Timing and consequenceThe milestone and what follows a missA promise with no date and no consequence

Slot one: the requirement, and the exclusion that travels with it

The requirement slot carries the standard, the object and the evidence type in a single sentence, and it carries the word furniture deliberately.

The lever handle and knob furniture supplied under this item shall be shown to conform with the current published edition of EN 1906 by [document type], issued by [holder], whose scope covers the product designation, furniture type, finish and geometry as quoted in this request for quotation, and shall be provided before [milestone].

That sentence works on its own. What makes it work in practice is the sentence that follows it, because the failure mode is not that a supplier lies — it is that the file is read later by somebody who has not read the clause, and who reasonably concludes that a document attached to a smart lock is about the smart lock.

The evidence supplied under this clause relates solely to the lever handle and knob furniture. It shall not be relied upon as evidence of conformity of the locking function, the cylinder, the escape function, the radio characteristics, the electrical characteristics or the environmental performance of the product, each of which is governed by a separate clause in this request for quotation.

Notice where the exclusion points. It does not say the product fails those requirements; it says this document cannot speak to them. A clause that reads like a disclaimer gets ignored, while a clause that assigns each requirement to a named place gets used. Put the exclusion in the evidence schedule as well as in the clause body, so a reviewer working through a schedule of document rows sees the boundary without reading the prose.

Slot two: the object, and why finish is the field that breaks

The object slot is where furniture clauses live or die. A furniture type entry typically lists a family of variants built on a common body, and the fields that vary across that family are the fields that can move without anybody noticing.

FieldWhat to writeWhere to take it fromThe substitution it invites
Product designationThe factory part number exactly as it appears on the dated product pageThe dated product page for the specific SKUA near-identical designation from an adjacent series
Furniture typeLever handle or knob, stated in wordsThe quotation lineA knob supplied against a lever line
FinishThe finish designation as it appears on the product pageThe dated product pageThe most frequent change in a furniture order
HandingThe handing that applies to the door swingThe door schedule and product pageReverse-hand supplied against a swing schedule
Fixing centres and projectionRead from the dated product page; do not transcribe them into the request for quotationThe dated product pageGeometry that does not suit the door
Fixing interfaceHow the furniture mates with the lock caseThe supplier's technical description for the SKUA furniture set that will not mount on the case

Two rules follow. First, do not type measured values into the request for quotation. A number written there becomes the buyer's requirement, and a mismatch reads as a dispute rather than a substitution. Keep the geometry values on the product page and put the pointer — designation, finish, dated product page reference — into the clause and the schedule instead.

Second, require the supplier to map the quotation onto the type entry, because the mapping is what is missing from almost every furniture document.

The Supplier shall state which of the furniture variants listed in the type entry of the evidence supplied correspond to the product designation, furniture type, finish and geometry quoted in this request for quotation, and shall not supply a variant outside that list without prior written notice.

In an original-equipment programme this clause earns its place on its own. The finish changes three months into production; the knob becomes a lever because the door schedule moved; the handing is wrong on one pallet because two swings were mixed in the survey. Without the notice obligation each becomes a silent substitution, and the evidence for the shipped furniture stops matching.

Slot three: the document, slot four: the holder, slot five

The document slot. Name the document type. "Evidence of EN 1906 conformity" is not a document type; it is the phrase a buyer uses when the decision has not been made, and a supplier who reads it sends whatever is easiest to send. "A certificate issued by a named body" and "the test report issued for the type, together with the signed declaration that relies on it" are document types, and a supplier can answer either.

The holder slot. Name who issued the document and who can confirm it. For a self-declaration, name the signatory and the capacity in which they sign, because the strength of a declaration comes from the legal exposure of whoever signs it. For a third-party certificate, record the issuing body so that a scope question can be put to the body rather than to a salesperson. If a supplier declines to release the certificate, do not accept the refusal silently: ask for the scope page and the holder's name, ask the holder to confirm the scope directly, and record a decision to rely on a lower rung as a decision rather than as an omission.

The edition slot. Write the current published edition, including any amendment in force at the date the evidence is issued, and require the edition and amendment cited to be stated on the document. Add a change-notification obligation so that a supersession during production does not pass unnoticed.

One practical point about furniture files. A supplier's standards pack is usually assembled over years rather than issued as one dated set, so an EN 1906 furniture document may sit beside a mechanism document from a different vintage. Never assume one PDF is internally consistent. Check the date, the edition and the scope on each document separately, and record them separately in the schedule.

Slot six: the scope, slot seven: site and validity, slot

The scope slot. The type entry must include the variant you have ordered. When it does not, you are not being asked to accept a lower quality of evidence — you are being asked to accept evidence about a different object. That is a legitimate position for a programme with a sensible risk appetite, provided the gap and its consequence are written down and someone owns them. What is not legitimate is discovering the gap at handover.

The site and validity slot. Name the production site the evidence covers, and ask what keeps the evidence true after the sample passed. Something has to maintain the connection between a tested type and a shipping product: a stated control on changes to the type, a surveillance arrangement, an inspection regime, or an internal control the supplier can evidence. Ask to see the arrangement rather than the assurance. This slot connects to the supplier-side checks in the Smart Lock Factory Audit Checklist for International Buyers and to the document review in What Documents Should You Request From a Smart Lock Supplier?.

The timing and consequence slot. Set the milestone and the consequence together, and be realistic about which evidence is available when. Furniture evidence is commonly in the supplier's file before quotation, because the handle is an existing part of the range. Mechanism evidence for a newly developed smart lock is frequently a pre-shipment condition, because the lock is the thing being developed. Two milestones on two rows, with two consequences, is the honest arrangement; a single milestone for both assumes the harder document arrives with the easier one.

CONFIRM-WITH-LOCAL-CERTIFICATION-BODY — whether a certificate issued against one edition of EN 1906 remains valid when a later edition or amendment is published, and what your national implementation guidance says at the date of your order. Ask the body that issued the document, not the factory.

The companion clause: pairing the furniture clause

The rule that makes an EN 1906 clause work is simple to state and easy to omit: every EN 1906 clause in a smart lock request for quotation is issued with a named companion clause for the locking function, and the two are cross-referenced in the schedule. One without the other leaves a hole that the furniture document will be invited to fill.

The question on the doorThe clause that answers itWhat that clause must not be used for
Handle and knob furnitureEN 1906The locking function, the cylinder, the escape function, the radio
Electromechanically operated lock and striking plateEN 14846Furniture durability, radio characteristics, fire assembly performance
Mechanically operated lock, latch or locking plateEN 12209The electromechanical function of a battery-driven lock
Cylinder for locksEN 1303The lock body, the electronics, the escape function
Mechatronic cylinderEN 15684Plain mechanical cylinders, the lock body
Multi-point locking systemEN 15685Single-point smart lock bodies
Emergency escape device operated by a lever handleEN 179Panic bars, which fall under EN 1125
Emergency escape device operated by a panic barEN 1125Single-lever exit devices
Radio and electromagnetic compatibilityThe radio and electromagnetic regimes of the destination marketMechanical durability, escape release, ingress protection
Ingress and impact protectionThe ingress and mechanical-impact rating systemFire assembly performance, escape release
Fire and smoke door assembly performanceThe fire-resistance test route for assemblies, with hardware fittedStand-alone hardware performance

Every row is a routing aid, and the published title and scope for each designation is the authority. The scope boundary of the standard under discussion is set out in EN 1906 for Smart Locks: Scope, Tests and What the Standard Never Proves, and the hinge-versus-lock citation confusion that shows up in the same templates is examined in EN 1906 Versus EN 1935: Which One Applies to Your Smart Lock Door.

The class and grade numbering that appears on furniture documents is decoded in Decoding EN 1906 Class and Grade Numbers for Door Hardware. For drafting purposes the rule is simple: do not transcribe a number from a document into the clause. Write the requirement against the current published edition, let the supplier state the classification on the evidence, and check that it agrees with the variant you ordered.

classDiagram
    class ClauseSet {
        +string reference
        +string requirement
        +string boundary
        +string boundTo
    }
    class FurnitureClause {
        +string designation
        +string furnitureType
        +string finish
        +string geometry
        +string documentType
        +string productionSite
    }
    class MechanismClause {
        +string designation
        +string drivingFunction
        +string documentType
    }
    class ScheduleRow {
        +string documentType
        +string holder
        +string number
        +string issueDate
        +string coveredVariant
        +string dueMilestone
        +string consequence
    }
    ClauseSet "1" *-- "1" FurnitureClause : furniture requirement
    ClauseSet "1" *-- "1" MechanismClause : locking function requirement
    FurnitureClause --> ScheduleRow : evidenced by
    MechanismClause --> ScheduleRow : evidenced by

Who supplies the furniture decides whose file it goes

Before the clause is drafted, one commercial fact has to be settled, because it determines whose document is being requested and from whom: who actually supplies the handle. Three arrangements are common, and they produce three different document flows.

ArrangementWhere the furniture evidence sitsWhat the smart lock request for quotation must say
Lock and furniture supplied as one package by the lock supplierIn the lock supplier's pack, with the furniture clause and the mechanism clause in the same fileRequire both documents, and require the type entry to name the furniture as well as the lock
Lock supplied with a specified furniture set from the lock supplier's range, chosen on the quotationSame pack, but the variant selection belongs to the buyerRequire the supplier to map the quoted finish and geometry onto the type entry
Furniture supplied under a separate contract line by a hardware supplierIn the hardware supplier's file, under a different contract, with a different holder and expiry dateAsk for no furniture evidence on the lock contract, and require the two contracts to name each other so the boundary is visible

The third arrangement is the one that quietly breaks. The smart lock file closes with a document that the lock supplier's evidence cannot supply, the hardware file closes with a document nobody asked for, and the door arrives complete while the file stays incomplete. A single sentence in the schedule — naming which party supplies the furniture and which contract line carries the evidence — prevents it, and matters more still where the two files are read by people who have never met.

The four documents a supplier will offer

Four documents arrive under a heading like "EN 1906 compliance", and they are not interchangeable. Naming which one the clause requires is the difference between a comparable set of quotations and a folder of brochures.

DocumentWhat it actually saysWhat to check before relying on itTypical furniture failure
Test reportA sample of a described product was tested against named clausesNumber, date, who tested, the sample description, the clauses tested, whether the sample matches the ordered variantA report on a handle in a different finish, or on a knob rather than the quoted lever
CertificateA named body attests that a defined scope of product conforms to a defined standardIssuing body, number, scope wording, standards listed, issue date, any surveillance or validity conditionA scope covering a furniture family whose type entry omits the ordered variant
Declaration of conformityThe manufacturer or importer makes its own legal claimWho signed it, in what capacity, what it covers, what evidence it rests on, whether it matches the shipped variantSigned by a party with no relationship to the product, or with no signature and no date
MarkingThe manufacturer declares the product is placed on the market under an applicable regimeWhich regime, whether the marking appears on the product or only in a document, and what the supporting declaration saysA marking shown in a brochure graphic rather than on the product or its label

The rungs run in a known order: a marketing image at the bottom, then a self-declared declaration, then a test report on a sample, then a third-party certificate with a scope and a number, then a certificate whose scope covers the exact variant being bought, and finally the production-control evidence that keeps it valid after the sample passed. The recurring commercial failure is buying near the bottom and discovering at installation that nothing above it was going to exist. For en 1906 smart lock rfq clause, the position on this ladder is what the purchase decision turns on.

So set the rung in writing before the request for quotation is issued: "Responses are evaluated at the evidence rung stated in the evidence schedule, and a lower rung may not be substituted for the rung stated." That turns an argument about how much evidence is enough into a decision you made in advance and can defend.

Marking, the construction products route and the market question

Two routes run in parallel with the furniture requirement, and neither substitutes for it.

The first is market access. A marking on the product declares that the product is placed on the market under an applicable regime; it says nothing about which clauses of which standard were tested on which sample, and nothing about furniture performance. Which regimes apply, and which mark each destination market expects, is a per-market and per-product question. Acceptance practice for the UK mark varies between specifiers and approving bodies, which is a recurring source of confusion.

The second is the construction products route. For door hardware sold as a construction product, the European construction products route drives a Declaration of Performance in addition to a declaration of conformity, and the mechanically operated and electromechanically operated lock families sit inside that route. Whether the handle and knob furniture in your order sits on that route is a per-product question your market's implementation decides, and it should be checked rather than assumed. The routing table for that route and the declaration language is in Writing the EU Construction Products Regulation Into a Smart Lock RFQ: Clause Language that Gets Real Answers.

CONFIRM-WITH-LOCAL-LEGAL-ADVISER — which conformity route applies to the furniture and to the locking mechanism in each market you are supplying, whether a Declaration of Performance is required in addition to a declaration of conformity, and which party in your supply chain carries the legal obligation to hold and to produce it. Check the published scope and the harmonised list in force for each market at the date of your order, because the list changes.

CONFIRM-WITH-LOCAL-REGULATORY-CONSULTANT — whether the marking on the product and the evidence supplied under the furniture and mechanism clauses are consistent, and whether the mark required differs from the mark already present for each destination market.

Keep the two routes apart on paper. A short clause stating that conformity evidence under the furniture clause is supplied in addition to any marking or market-access document, and that neither substitutes for the other, costs one line and prevents a category of handover argument.

The evidence schedule row for the furniture clause

The schedule is where clauses become checkable. One row per clause, and a row with an empty cell is a clause nobody is working on.

ColumnWhat goes in itWhy it earns its place
Clause referenceThe clause number from the request for quotationTies the document to the obligation that demanded it
Document typeReport, certificate, declaration or markingStops a lower rung being passed off as the required one
Object coveredDesignation, furniture type, finish and geometry as quotedThe column that catches a substitution later
HolderThe issuing body, or the signatory and capacityGives you somebody to ask when the scope is unclear
Number and dateAs printed on the documentDates the evidence and exposes mixed-vintage packs
Edition citedAs printed, with any amendmentConnects the document to the edition in force
Production siteThe site the evidence coversCatches the second-factory problem
Due milestoneBefore quotation, before award or before shipmentDecides whether you are comparing documents or promises
ConsequenceWhat follows a missA date without a consequence is a date nobody has to meet

The worked row for a typical furniture clause carries the clause reference, the document type, the quoted designation with its finish and geometry, the issuing body, the number and date as printed, the edition cited, the production site that will ship the goods, a milestone before the technical comparison closes, and a consequence.

Two schedule disciplines are worth more than the individual columns. Split the pack — ask for one file per object rather than one combined standards pack, so the furniture document, the mechanism document and the marking are never mistaken for each other. And record the rung you are buying at, because a schedule with no rung statement invites a negotiation down one clause at a time.

Reading the responses: what comes back and what it means

Suppliers reply in paragraphs. Grade the answer rather than the tone, and return the replies that are not answers while there is still time to re-ask.

Reply patternReadingAction
Document named, attached, with a scope pageAnswerableGrade against the rung the schedule states
A standard listed with no document attachedNot yet an answerRequest the document and name the type required
A scope page listing a furniture family that excludes the quoted finish or geometryWrong object for this orderRe-ask with the quotation line fields written into the request
An edition cited with no amendmentAmbiguousAsk for both, and for the amendment in force
The claim that the company is "certified to EN 1906" with no number, no scope and no holderAn unattributed assertionAsk for the holder and the scope, in writing
The claim that the certificate is available on request after the orderA promise, not a documentDecide whether it is a condition of award or of shipment, and write the date and consequence
One combined file holding the furniture, mechanism and marking documentsOne pack, three objectsAsk for it split, one file per object, before evaluation

The last row causes the mistake this article is about. When the furniture certificate, the mechanism certificate and a market-access declaration travel together in one pack, a reader under time pressure will find the EN 1906 document first, read the pack as a set of answers for the product, and treat the product as evidenced. Splitting the pack is a five-minute instruction that prevents the costliest misreading in the file.

The clause set, collected

Collected, these are the clauses a smart lock request for quotation would carry for the furniture requirement. The bracketed fields are the ones only the programme can fill in.

RefClauseDocument that must existBound to
C1Furniture shown to conform with the current published edition of EN 1906 by [document type], scope covering the quoted designation, type, finish and geometryCertificate or test report with a scope pageSupplier
C2Evidence under C1 relates solely to the furniture and is not evidence of the locking function, cylinder, escape function, radio, electrical or environmental performanceBoundary statementBuyer
C3Supplier states which type entry variants correspond to the quoted designation, type, finish and geometry, and gives prior notice of any variant outside that listType entry mappingSupplier
C4Evidence supplied as a complete document with its scope page, not a summary, extract or marketing pageFull documentSupplier
C5Conformity to the current published edition and any amendment in force at issue, cited on the documentEdition statementSupplier
C6Supplier notifies before shipment if the cited edition or amendment is superseded and states whether the evidence remains validChange notificationSupplier
C7Evidence covers the production site that will ship the goods, with the production-control and type-change arrangement statedSite statement and control descriptionSupplier
C8Responses identify document type, holder, number, date, edition cited, object covered and production site, and attach the documentComplete response per clauseEach respondent
C9Documents supplied as one file per object, so furniture, mechanism and marking evidence are not held in one combined packSplit packsSupplier
C10The locking mechanism, cylinder, escape function, radio and environment are specified in separate clauses and evidenced separatelyCompanion clause setSupplier

The two fields carrying the most weight are the milestone in C1 and the boundary in C2. The milestone decides whether you are comparing documents or comparing intentions, and it is much cheaper to set before the quotations arrive. The boundary decides whether the file stays honest, and it costs one sentence.

Ten moves before the request for quotation goes

  1. Break the door into its questions. Furniture, mechanism, cylinder, escape, radio, environment, assembly. If you cannot list them, you cannot write clauses for them.
  2. Decide who supplies the furniture. Lock package, supplier's furniture set, or a separate hardware contract. This decides whose document you request.
  3. Partition the requirement by object. One clause set for the furniture, a separate clause set for the locking function, separate clauses for everything else.
  4. Fill the object fields from the dated product page. Designation, furniture type, finish, handing and geometry — and keep the measured values off the clause text.
  5. Name the document type. Not "evidence", not "compliance". A report, a certificate, a declaration or a marking.
  6. Write the boundary sentence and put it in the schedule. It is the clause that stops the furniture document being borrowed.
  7. Decide the rung and write it into the schedule. You are choosing where the programme sits on the ladder of evidence, before quotations arrive.
  8. Set two milestones, not one. Furniture evidence before the technical comparison closes; mechanism evidence as a condition of award or of shipment, each with its own consequence.
  9. Check the neighbours. Mechanism, cylinder, escape, radio, environment and fire assembly are separate questions with separate documents, and each one needs its own clause or an explicit statement that it is out of scope for this contract.

What a reviewer will ask about the handle

"The supplier says the lock already has EN 1906. Why are you asking for more?" Because a document that names EN 1906 says something about the furniture, and your question is about the ordered variant of that furniture. Ask for the scope page and the type entry, and the answer is usually already inside the document the supplier offered.

"Can we just take the certificate number and check it ourselves?" You can, and you should, but a number carries no scope. The scope page tells you what is covered; the number tells you who to ask. Ask for the document.

"Our supplier will not release the certificate for commercial reasons." Then ask for the scope page, the holder and the date, and ask the holder to confirm the scope directly. If the answer is still no, the programme is choosing to rely on a lower rung, and that choice belongs in the minutes rather than in a silence.

"Should we name the edition, or leave it open?" Name the current published edition including any amendment in force at the date of issue, require the edition and amendment to be cited on the document, and attach a change-notification obligation. If a specific edition is wanted for a reason — a local implementation rule, a tender instruction, a client standard — put that reason in the clause so it survives the next review.

Where this clause set stops

The clause set cannot tell you which standard your market applies to the furniture, because that is a per-product and per-market question and it changes. It cannot tell you whether a given door needs an escape device, because that is a question about the door schedule, the escape strategy of the building and the local approving route. It does not tell you how much evidence is enough — that is a programme risk decision, and the value of the rung statement is that it lets you make the decision explicitly.

What the clause set does do is narrow the claim. It makes the furniture requirement say exactly what it covers, keep it out of the questions it cannot answer, and put the locking function, the cylinder, the escape function, the radio and the environment into clauses of their own with evidence of their own. The evidence-list version of the same set for a tender pack is in EN 1906 in a Smart Lock Tender Pack: the Evidence Checklist, and the ways this evidence disappoints buyers after award are set out in Three Ways EN 1906 Evidence Disappoints Smart Lock Buyers.

For the sourcing-side preparation around these moves, the Smart Lock Supplier Due Diligence Checklist and the Smart Lock RFQ Guide for International Buyers are the documents to hand to whoever maintains the template. The Smart Lock Door Measurement Guide and Smart Lock Handle Measurement supply the geometry fields the object slot depends on. The order samples page describes the product-side review, the certifications page the conformity documentation route, and request a quote the route where a scoped enquiry saves a round of correspondence.

Ваша корзина
Ваш опыт использования этого сайта будет улучшен, если вы разрешите использование файлов cookie Политика использования файлов cookie
Chat on WhatsApp