Slk d12 specification decode: decode the SLK-D12 field by field, from access methods and lock body to power, packing, weatherproofing and project documentation.

Opublikowano: wrz 13, 2023

SLK-D12 Specifications, Field by Field

SLK-D12 Specifications, Field by Field

Start with the field, not the marketing label

The slk d12 specification decode begins with a simple procurement rule: separate what the catalogue states from what the project still needs proven. The supplied record identifies the SLK-D12 as a “Single-Sided Weatherproof Smart Lock for Aluminum Patio Doors.” Its catalogue fields then describe access, platform, body, power, packing, capacity, environment and services. Each field answers a different question, and none should be stretched beyond the evidence printed beside it.

Direct answer. In short, slk d12 specification decode is the subject of this piece. slk d12 specification decode is where the work on slk d12 specification decode sits. slk-d12 is what has to be evidenced before anyone signs. A slk d12 specification decode treats one component on its own terms. slk d12 specification decode names the tests that close it. slk d12 specification decode is not accepted on a headline figure.

Throughout, slk d12 specification decode means what slk d12 specification decode sets out. It is a working definition of slk d12 specification decode drawn from the evidence below. It is valid for the specific market and product, not as a general claim.

That distinction matters when a procurement manager is comparing an aluminium patio door lock for evaluation. A populated field can confirm that a feature is recorded; it cannot establish compatibility, site suitability, expected service life or the commercial scope of an order. Before any SLK-D12 field drives a sample approval or project release, confirm on the dated product page for the specific SKU and retain the corresponding drawing, manual or configuration evidence.

The slk d12 specifications are therefore treated here as a controlled source record rather than a finished technical file. This article follows the component chain from credential input to lock operation, then continues through network functions, enclosure, carton controls and order documentation. For cross-reference purposes, the same record is organized as an SLK-D12 procurement checklist covering the SLK-D12 access methods, SLK-D12 lock body, SLK-D12 power supply, SLK-D12 packing data and SLK-D12 weatherproof housing.

Build a physical map before reading a feature list

A component teardown works best when each specification field is attached to an object a buyer can inspect. For the SLK-D12, the starting objects are the panel and escutcheon, keypad, fingerprint sensor, RFID reader, lock body or mortise, latch or bolt drive, cylinder, mechanical override, battery compartment, control PCB and any RF or wireless module recorded under the platform field. These are inspection points, not a claim that every item appears as a separately supplied accessory.

The following flow turns catalogue reading into an evidence sequence. It stops the review when a field remains unsupported rather than allowing an assumption to move downstream.

flowchart TD
    A[Open catalogue record] --> B[Access components]
    B --> C[Panel and lock body]
    C --> D[Power and control path]
    D --> E[Platform and credentials]
    E --> F[Environment field]
    F --> G[Packing field]
    G --> H[Build evidence file]
    H --> I{Every procurement field evidenced}
    I -- No --> J[Hold release]
    I -- Yes --> K[Commercial review]
Teardown groupCatalogue fields to preservePhysical or documentary objectEvidence destination
AccessRFID/IC card, passcode, fingerprint, mobile app, mechanical overrideReader, keypad, sensor, app workflow and override interfaceAccess acceptance sheet
BodyStyle, material, mortise and finishPanel, aluminium lock body, moving parts and finish sampleDrawing and sample record
PlatformTTLock, Tuya, connectivity and functionsApp configuration, network dependency and access recordsConfiguration note
PowerFour AA alkaline cells and low-battery alertBattery compartment, alert behavior and replacement routeOperating procedure
PackingCarton dimensions, quantity and gross weightExport carton, labels and receiving controlsPacking sheet
Capacity and environmentFingerprint capacity and weatherproof housingCredential limit and installed enclosureCapacity and site checks
ServicesDrawings, guide, datasheet and OEM/ODM optionsDocument set and customization instructionApproval folder

The practical value of this map is that a missing datum has an owner. For example, an unclear panel dimension becomes a drawing request, not a general request for “more information.” A remote-unlock question goes to the platform configuration owner. A door-preparation gap goes to the installer and order reviewer.

Access layer: five credentials, five evidence packages

The access field lists RFID/IC card, passcode, fingerprint, mobile app and mechanical override, each with the catalogue value “Standard.” Here, “Standard” identifies the recorded value; it should not be read as a card standard, performance rating or project-specific compatibility statement. The five methods need separate acceptance evidence because they enter the lock through different interfaces.

For RFID/IC card, request the applicable card format and credential-production process, then verify what a reader event should look like in the relevant app or management workflow. The supplied row does not state a frequency or card family for the SLK-D12, so neither may be borrowed from another lock in the catalogue.

For passcode, distinguish temporary and periodic access from ordinary user codes. The platform field records temporary/periodic passcodes as a function, while user management and access records appear as separate functions. Ask how a code is issued, changed, expired and traced, and record the exact configuration included in the quotation.

For fingerprint, the capacity field states 100 fingerprints. Require evidence showing how templates are enrolled, deleted and audited. Do not convert that figure into total user capacity: cards, passcodes, fingerprints and remote users may be governed differently.

For the mobile app, determine whether the shipped configuration uses the TTLock, Tuya or another explicitly identified workflow. App name alone is insufficient because installation ownership, remote access and record handling depend on the actual configuration.

For mechanical override, request the physical interface, key or tool arrangement, access procedure and relationship to emergency use. The catalogue records mechanical override as standard but does not provide the cylinder, key count or override geometry.

Body, panel and the 3585 lock body

The supplied body and panel record is specific: “Double-Sided Broken-Bridge Aluminum Fingerprint Lock,” aluminum alloy material, a “3585 broken-bridge aluminum lock body” and black finish. These phrases belong to their named catalogue fields and should be carried into the RFQ without being converted into dimensions or installation guarantees.

One source issue deserves explicit attention. The model name says “Single-Sided Weatherproof Smart Lock for Aluminum Patio Doors,” while the style field says “Double-Sided Broken-Bridge.” These are not interchangeable descriptions. Procurement should not quietly choose one interpretation. Obtain the drawing for the ordered SKU and identify which side carries the keypad, sensor, RFID reader, handle and service access.

The 3585 designation identifies the recorded mortise family, but the row does not supply the case dimensions needed for door preparation. Request a dimensioned drawing covering the case, backset, spindle relationship, faceplate, latch or deadbolt travel, rebate depth, strike keeper and fixing positions.

Material and finish also require careful acceptance. “Aluminum alloy” identifies the recorded material of the lock assembly; it does not establish the alloy grade, coating system or suitability for a particular coastal environment. The black finish should be checked against an approved finish reference rather than a generic color name.

The moving parts must be inspected as a set. For the SLK-D12 lock body review, look at the latch or bolt drive, spindle connection, cylinder area and strike interface. Record looseness, alignment and travel as observed facts, but do not convert a sample observation into a cycle-life claim.

Door fit is deliberately not settled by this teardown. Use SLK-D12 Door Fit Questions, Answered for Procurement Teams for the separate measurement workflow, then return the verified dimensions to this component file.

Power path: what four AA cells actually tell you

The power field records “4 × AA alkaline batteries” and a standard low-battery alert. That is enough to define the recorded power source and alert feature. It is not enough to calculate service intervals, motor-load tolerance, replacement frequency or the number of operations supported.

A useful SLK-D12 power supply review follows the energy path. First, inspect the battery compartment for access, cell orientation and the space needed for four AA alkaline cells. Second, observe the low-battery alert during a controlled test and record the user-facing indication and escalation path. Third, identify which lock functions remain available when the alert is active. Finally, agree the replacement and end-of-life procedure before deployment.

The catalogue does not give battery-run time, standby consumption or cycle data for this model. Those values should be requested only with a defined test condition, such as stated usage frequency, network condition and alert behavior. Otherwise, a generic endurance estimate would introduce an unsupported variable into the evaluation.

The emergency power route is another blank rather than a feature to infer. The supplied SLK-D12 row does not identify an external power override through a USB terminal. Ask whether an approved emergency contact method exists for the ordered configuration, where it is located and how it is trained. Do not assume a port is present because another product family has one.

The motor and gearbox, latch or bolt drive and control PCB remain part of the internal teardown even though the catalogue does not expose their individual ratings. Request internal photographs, wiring identification and the approved battery replacement procedure. Record what can be inspected without dismantling a working sample.

Platform layer: separate Bluetooth, Wi-Fi and software ownership

The platform field records “TTLock (Bluetooth) and Tuya (Wi-Fi),” with connectivity listed as “Wi-Fi / Bluetooth.” It also records remote unlock, temporary/periodic passcodes, user management and access records. These entries are valuable because they define the software questions, but they leave an important configuration choice for the project order.

A buyer should not assume that every ordered unit presents both application paths. The procurement question is which workflow belongs to the quoted SLK-D12 configuration, how that workflow is provisioned and who controls the associated records. Request the app or management route, configuration steps, account ownership process and the exact functions available in the selected version.

Remote unlock needs a project boundary. Identify the trigger, the authorization check, the network dependency, the audit trail and the procedure for lost credentials. If the project requires property staff to manage temporary access remotely, include that scenario in the sample test rather than accepting the word “remote” as the evidence.

User management should be separated from record storage. Ask how users are added, grouped, suspended and removed, and where access records can be exported. The row records the function but gives no retention count, export format or hosting term. Those details belong in the project document.

The app choice also affects handover. A buyer may need to know whether the operating company or installer manages initial setup, whether administration can be transferred and which setup materials are included. Put the answer against the order line rather than leaving it in salesperson notes.

For a deeper treatment of the credential workflow, see How Credentials and Management Software Work on SLK-D12.

Capacity, codes and the event trail

The capacity field gives one hard number: 100 fingerprints. That number answers a narrow question about fingerprint-template capacity. It does not provide a combined-user total, card count, passcode count, offline authorization limit or event-record capacity.

Procurement should maintain three separate limits in its file. The first is the published fingerprint-template limit. The second is the number of operational identities the selected software configuration will permit. The third is the amount of access history the project needs retained and exported. Each limit needs its own evidence because one does not imply another.

For codes, distinguish an operator, a temporary visitor, a recurring contractor and a remotely issued credential. The temporary/periodic passcode function suggests a scheduling workflow, but the row does not describe validity-window granularity, expiry enforcement or offline behavior. These are configuration questions for the selected platform.

For access records, ask what is captured, when it is synchronized and who can retrieve it.

A concise acceptance sheet can prevent scope drift:

Limit or functionCatalogue positionEvidence requiredAcceptance wording
Fingerprint templatesCapacity stated as 100Enrollment and audit demonstrationRecord the tested configuration and observed capacity
Temporary or periodic passcodesPlatform function recordedValidity-window demonstrationIdentify the exact software workflow
User managementPlatform function recordedAdd, suspend and remove testName the account and handover owner
Access recordsPlatform function recordedEvent creation and retrievalRecord available fields and export route
Remote unlockPlatform function recordedAuthorized remote testTie the function to network and account prerequisites

Environment field: keep weatherproof housing precise

The environment row records “Weatherproof housing.” That phrase supports a housing-design question, but it does not provide an ingress rating, salt-spray result, ultraviolet exposure result, temperature range, humidity range or test certificate. It also does not establish how the lock performs at a specific coastal, exposed or frequently wetted site.

Request the dated environmental test information for the ordered SKU and ask how the evidence applies to the intended installation. The supplier should identify the enclosure construction, sealing points and maintenance conditions supported by the test. A photograph of a sealed housing is useful documentation, but it is not a substitute for stated test scope.

The aluminium patio door context should shape the site questions. Consider where runoff, standing water, direct sun, salt deposits and cleaning routines will occur. These are exposure categories to investigate, not claims that every SLK-D12 installation encounters them.

Any requirement for approvals or project-specific evidence must remain separate from the catalogue wording. Do not turn “weatherproof housing” into a certification claim or guarantee.

CONFIRM-WITH-LOCAL-AUTHORITY: Confirm the applicable product, installation and access-control requirements for the project site, including which authority or approving party signs off where relevant.

The environmental release record should therefore contain the catalogue phrase, the dated supporting document, the intended exposure profile and any unresolved installation conditions. That combination is stronger than either a promotional label or an unsupported performance adjective.

Packing record: convert carton fields into receiving controls

The packing fields state a carton size of 540 × 460 × 375 mm, 10 units per export carton and 20.5 kg gross weight per carton. Together, these form the SLK-D12 packing data needed for logistics review, but they describe the export carton rather than the individual lock.

Gross carton weight includes packaging as well as product and insert weight. It should not be entered as the shipping weight of one SLK-D12. If a receiving calculation needs unit-level mass, request the packed unit specification and the packing method used to reach the stated carton total.

Dimension order and carton orientation also need confirmation from the packing drawing. The three measurements allow space planning, but a receiving team should not guess which side faces the pallet or whether the carton can be laid flat. Request the marked carton drawing, label position and stacking guidance.

The field for units per carton can support goods-in counting, but packing changes can alter it. The services field lists custom packaging among OEM/ODM options for distributor and project orders. Therefore, the standard 10-piece carton record and a customized order may not be interchangeable. Add the approved packaging revision to the purchase order and receiving instructions.

A practical carton record contains the dimensions, unit count, gross weight, carton label, master-carton markings, pallet arrangement and approved sample reference. If physical inspection is needed, measure the actual carton rather than relying only on the field summary.

Before sample dispatch, request the current catalog and retain the packing sheet with the technical approval. For any custom carton, request a pre-production proof and record who approved the difference from the catalogue packing fields.

The blank fields are procurement findings, not invitations to infer

The door-fit row for the SLK-D12 is shown as “—”. In this teardown, that means the supplied record does not answer applicable door thickness, door type, backset, rebate, spindle or case dimensions. It is a clear evidence gap for evaluation, not permission to borrow values from another aluminium lock.

The same discipline applies to several other unanswered questions. Panel dimensions are not populated. The SLK-D12 lock body dimensions are not printed beside the 3585 designation. Battery endurance and operating cycles are not stated. The credential format, code-limit rules and access-record capacity are not specified. The environment row provides no numeric test range. The exact relation between TTLock, Tuya and a shipped configuration is not explained.

Each unknown should be converted into a precise request. For an existing opening, use the Office Smart Lock Site Survey to organize door and access-control observations. For a retrofit or replacement lock, use the Smart Lock Retrofit Site Survey to capture the existing condition and removal constraints. Neither survey supplies missing SLK-D12 product data; both create a reliable site-side record against which the manufacturer evidence can be checked.

Avoid a request such as “Please send full specifications.” Split it into named evidence: dimension drawings, the installation guide, the full datasheet, app configuration notes, packing drawing and environmental evidence. The supplied services field says dimension drawings, an installation guide and the full datasheet are available on request, which makes a focused document request appropriate.

Decision table: turn catalogue fields into release conditions

The table below converts the component review into an operational decision. “Accept” means the evidence package is complete for the stated use. “Hold” means the feature is recorded but cannot yet govern procurement. “Reject evidence” means the submitted item does not match the record or requirement; it does not mean the product has failed.

Field and evidence testHold conditionAccept conditionWhy it affects the decision
Access methodsOne method lacks a documented test or selected configurationEvery required credential path is identified and demonstratedPrevents a feature-list mismatch
Body and mortiseSource wording or dimensions remain unresolvedDated drawing identifies the supplied configuration and door interfaceProtects installation scope
PowerBattery type, alert behavior or emergency route is ambiguousPower procedure and tested alert are attached to the SKUSupports maintenance planning
PlatformApp, network and remote-unlock responsibility are unclearOrdered workflow and account handover are documentedSeparates software from hardware acceptance
CapacityFingerprint, user and record limits are combinedEach operating limit is recorded independentlyPrevents overbooking or retention assumptions
Environment“Weatherproof housing” is the only evidenceTest scope and intended exposure are documentedAvoids an unsubstantiated performance claim
PackingCustom packaging has not been reconciledCarton revision and receiving controls match the orderProtects shipment and goods-in checks
DocumentationRequested drawings or guides are absentDated documents are linked to the exact SKUCreates an auditable evidence trail

Apply the same test to commercial documents. The offered quotation, sample scope and final order should point to one configuration record rather than several unrelated descriptions. If the body style changes from “Double-Sided” to “Single-Sided,” or if platform, finish or packaging changes, the change should trigger a new evidence comparison.

A practical review form can carry one status per field: accepted, held or returned for correction. Add the document name, date, approver and unresolved issue. The status belongs to the evidence item, while the product and order revision remain visible at the top. This prevents a blank field from disappearing inside a long email thread.

A field-complete RFQ sheet for the SLK-D12 procurement checklist

A copy-ready RFQ can preserve the component sequence without asking the supplier to repeat the entire catalogue. Send the following sections as one controlled attachment:

  1. Configuration identity: SLK-D12 model identity, ordered finish, panel configuration, lock-body designation and every approved drawing revision.
  2. Access package: Required RFID/IC card, passcode, fingerprint, mobile-app and mechanical-override methods, with the selected credential workflow and test expectations.
  3. Physical interfaces: Panel views, dimensions, backset, case, spindle, latch or bolt, strike, rebate and fixing information.
  4. Power package: Four AA alkaline cells, low-battery alert behavior, battery replacement procedure and the emergency contact route for the ordered configuration.
  5. Software package: TTLock or Tuya workflow, connectivity, remote unlock, temporary/periodic passcodes, user management, access records and handover responsibility.
  6. Capacity package: The 100-fingerprint limit, credential-production limits, code rules, record retention and export requirements.
  7. Environment package: Weatherproof housing evidence, test scope, intended exposure, maintenance and installation conditions.
  8. Packing package: Carton dimensions, 10 units per export carton, 20.5 kg gross weight, labels, pallet details and any approved custom-pack revision.
  9. Document package: Dimension drawings, installation guide, full datasheet and configuration instructions tied to the specific SKU.
  10. Commercial scope: Unit and accessory content, customization boundaries, sample scope and the quotation-linked configuration code.

For each line, require the supplier to answer “included,” “not applicable to this configuration” or “evidence pending,” then attach the source. Blank answers should remain visible. The services field lists custom logo, finish, packaging, manuals and product configuration for distributor and project orders, so each requested customization needs its own approval boundary.

The final RFQ should also ask the supplier to flag any proposed change to the catalogue fields. This makes a deviation visible before it becomes an assumption. Use order samples only after the documentary configuration is stable, and identify the sample against the same revision used in the RFQ.

Illustrative review: from catalogue row to controlled sample

The following scenario is illustrative and does not represent a completed installation or a customer outcome. A procurement team has an aluminium patio door project and needs access by card, passcode, fingerprint, mobile app and mechanical override. The catalogue supplies those feature fields, but the door fit row is blank and the team needs a controlled sample.

The first review compares the model name with the body style field. Because “Single-Sided” and “Double-Sided Broken-Bridge” appear in different supplied descriptions, the team does not choose the preferred interpretation. It requests the SKU drawing and a marked photograph of the sample.

The second review separates the ten platform functions from the physical sample. The buyer asks which app workflow is quoted, who owns the account, what remote unlock requires and how access records are retrieved. The team also asks whether the four AA alkaline cells and low-battery alert can be observed in the supplied configuration.

The third review creates separate limits for fingerprint templates, operational identities and retained events. The 100-fingerprint field is recorded, but it is not used to estimate card, passcode or record capacity. The buyer marks those controls as held until the selected workflow provides the missing limits.

The fourth review examines packing and environment. The standard carton fields are copied into the receiving sheet, while any customized carton is held against an approved packing proof. The weatherproof housing is linked to dated evidence and site exposure questions rather than accepted on the phrase alone.

At the end of the review, every field has one of three visible outcomes. Accepted fields have evidence, held fields have an owner and due request, and returned items have a correction request. A sample can then be approved against the resulting configuration file. This approach neither treats the catalogue as a finished submittal nor rejects a model because one supporting document was missing.

For the next control point, use A SLK-D12 Order Review: Items to Confirm Before Release to translate the approved evidence into purchase-order review and release conditions.

Close the loop with the right specialist article

A field-by-field teardown is complete when each procurement decision points to dated evidence for the ordered SKU. For the door and retrofit workflow, use Office Smart Lock Site Survey and Smart Lock Retrofit Site Survey. For deeper reviews of the component record, connect them with SLK-D12 Door Fit Questions, Answered for Procurement Teams and How Credentials and Management Software Work on SLK-D12.

When the configuration and evidence package are ready, request the current material through the catalog, approve a sample through order samples, and submit the controlled configuration with a quote request. The commercial request should identify the exact SLK-D12 configuration, the selected platform workflow, required documentation and approved packing revision.

The resulting order file should let another buyer repeat the decision without relying on memory: the catalogue field, dated document, observed sample result, named approver and unresolved question should remain together. That is the practical value of the slk d12 specification decode—a traceable record that supports evaluation while leaving every unproven specification visible.

Twój koszyk
Twoje doświadczenie na tej stronie zostanie poprawione dzięki zezwoleniu na pliki cookie Polityka plików cookie
Chat on WhatsApp