En 1935 smart lock RFQ clause: clause language for an EN 1935 smart lock RFQ that separates the hinge, the lock and the door assembly, so every answer arrives.

Publicerad den: jan 06, 2023

The Hinge Nobody Specified: Writing EN 1935 Into a Smart Lock RFQ

The Hinge Nobody Specified: Writing EN 1935 Into a Smart Lock RFQ

En 1935 smart lock rfq clause is the subject of this piece, and every claim below is written so a buyer can check it. Ask three suppliers to describe a smart lock as EN 1935 compliant and you will get three confident answers, all wrong in the same direction. EN 1935 is a single-axis hinge standard, not a lock standard and not a latch standard, and its scope is written around the movement of a hinge carrying the weight of a leaf. A line in a request for quotation that attaches that designation to an electronic locking device is not a subtle drafting slip. It is the citation error the standard's own framing exists to prevent.

The deeper problem is not the wrong designation. A clause naming only a designation names nothing else: no object, document, holder or date. Any supplier may therefore satisfy it with a catalogue page, a report on a sample, or a certificate covering a different product. Three suppliers can comply honestly and hand you three different things. That is not bad faith; it is clause design working as written.

Direct answer. A defensible EN 1935 clause in a smart lock request for quotation names the requirement, the object it attaches to, the document that evidences it, the body that issued it, the edition and date, the scope conditions, the delivery point and the consequence of non-delivery. On a smart-locked door those clauses split into three families — hinge, locking function, door assembly — because EN 1935 answers the first and nothing about the other two.

This piece is the drafting manual for that clause set, written for the procurement manager who owns the request for quotation and who will hold the evidence later, when a consultant, an approving authority or an internal auditor asks where the evidence for a door is.

Nothing here records a real meeting, supplier, project or authority. The clauses are drafted as templates with placeholders for you to fill.

The one-line clause that cannot be answered

Most smart lock specifications carry two lines that look like standards language and behave like decoration. One appears in a hardware schedule: "Hinges: EN 1935." The other in a product schedule: "Smart lock: EN 1935 compliant." The first is under-specified but repairable. The second is wrong in a way no supplier goodwill can repair, because it asks a hinge standard to answer a question about a motorised bolt. The product family this applies to is the smart door locks.

A third variant travels between them: "Door hardware: EN 1935 and EN 12209." This looks thorough and is worse than either line alone, because it fuses two objects into one sentence. A reader cannot tell which designation attaches to the hinge and which to the lock body, so the supplier cannot tell which to evidence.

Line as writtenWhat it fixesWhat it leaves openWhat a supplier may legitimately send
Hinges: EN 1935The standard family and the object familyEdition, hinge type, classification, document type, holder, dateA hinge leaflet and a generic test report for a different hinge model
Smart lock: EN 1935 compliantNothing usefulThe entire requirementA catalogue page, or nothing at all once the question is asked
Door hardware: EN 1935 and EN 12209Two standard familiesWhich object each attaches to, and everything elseA combined pack that never states which variant was tested

Notice what the third column says: every answer listed there is a lawful response to the clause as written. The clause is not being ignored; it is being obeyed. A weak clause does not fail loudly, it fails quietly, on the day somebody asks for the paperwork rather than the day you send the request.

Annotation — clause C1. Replace every bare designation line with the eight-slot pattern given further down, and delete any line whose object cannot be named. A clause whose object you cannot write down should not exist in the contract.

What EN 1935 actually governs

EN 1935 is a standard for single-axis hinges. Its published subject is building hardware — hinges for doors and windows — with requirements, test methods and a classification system by which a hinge is described. Check the published title and the current edition before you write anything: editions change, and a clause that fixes a year ages badly.

What the standard is interested in is the hinge: how it moves under load, how many cycles it must survive, the mass of the leaf it carries, and the conditions in which it must keep working. Check the published classification for the marked condition covering hinges used on doors that must open in the event of fire, and carry it into a clause only where the schedule needs it. The classification system describing those properties is unpacked in Decoding EN 1935 Class and Grade Numbers for Door Hardware.

What the standard is not interested in is locking. It has no opinion on a motorised deadbolt, the electrical drive that retracts it, the radio that signals it, or the fire behaviour of the door as an assembly. Applying it to any of those is reading outside its scope. The limits of the designation are set out in EN 1935 for Smart Locks: Scope, Tests and What the Standard Never Proves.

Two consequences follow for a procurement manager drafting clauses.

The first is that EN 1935 belongs to the hinge, so the clause belongs to whoever supplies the hinge. On many programmes the lock supplier does not supply hinges; they arrive with the door set, the ironmongery package or a separate hardware vendor. Demanding hinge evidence from a lock supplier produces a confused quotation, because the party asked cannot produce the document. Clause ownership has to follow document ownership.

The second is that a hinge clause may not be needed at all. If your scope is the lock and the hinges are already installed and bought by someone else, an EN 1935 clause in your request for quotation demands a document you cannot use. The clause belongs in the door set specification, and your lock clause should say so.

CONFIRM-WITH-LOCAL-BUILDING-CONTROL-BODY — whether hinges on the openings in scope are required to be evidenced to EN 1935, which product types and editions apply, and whether the authority will accept evidence for a variant different from the one installed. This is a per-opening and per-jurisdiction question.

The three-question architecture of a smart-locked door

A smart lock on a door creates three questions usually collapsed into one. What must the hinge do. What must the locking function do. And what must the door as an assembly do once this particular lock is fitted into it. Each is answered by a different document, held by a different party, on a different date.

graph LR
    Door["A door carrying a smart lock"] --> Q1["Hinge behaviour"]
    Door --> Q2["Locking function"]
    Door --> Q3["Door assembly"]
    Door --> Q4["Radio and power"]
    Q1 --> D1["EN 1935 hinge evidence"]
    Q2 --> D2["EN 14846 lock evidence"]
    Q3 --> D3["EN 1634-1 assembly evidence when fire rated"]
    Q4 --> D4["RED and LVD regime documents"]
    D1 --> E1["Report or certificate for the hinge type"]
    D2 --> E2["Report and declaration for the quoted variant"]
    D3 --> E3["Assembly evidence for the door set"]
    D4 --> E4["Technical file and declaration of conformity"]

The last column of the diagram answers a constant procurement question: once a supplier has sent a document, what does it discharge? A report on a hinge sample discharges the hinge clause and nothing else. A declaration of conformity for the lock discharges the declaration clause and produces no evidence about the hinge, or about the fire performance of the assembled door.

QuestionObject it attaches toDocument family that answers itWhat the supplier must produce
Hinge behaviour under load and cyclingThe hinge in the door scheduleEN 1935A test report or certificate for that hinge type, size and classification
Mechanical and electrical locking functionThe lock body and striking plateEN 14846 for electromechanical operation, EN 12209 for mechanical operation onlyA report on the tested variant plus a declaration for the quoted configuration
Performance of the door as an assemblyThe door set with its fitted hardwareEN 1634-1 where the opening is fire ratedAssembly-level evidence covering the configuration actually installed
Radio emission and immunity, mains safety, battery transportThe product and its accessoriesThe applicable market-access regimeThe regime documents, held in the technical file and referenced by the declaration

Treat this as a matrix. The rows are the openings in the door schedule; the columns are the question families. Every cell either contains a clause or says that the question does not apply to that opening. An empty cell is where the citation error lives, because it is the empty cell a supplier fills with a convenient designation from another column.

The matrix only becomes real once the door schedule exists, and the survey work that produces it is described in Smart Lock Door Measurement Guide and Smart Lock Retrofit Site Survey.

Clause group A — the hinge

The hinge clause is the easiest to write well, because the object is narrow and the standard family is single. It is also the clause most often written badly, because hinge requirements tend to be inherited from a door schedule copied years ago.

Start with the object: which hinge, in which size and finish, on which leaf, for which door mass. Then say which standard family and edition, what document demonstrates it, who issues it and who must deliver it.

Clause A1. The hinges specified in Annex C, reference [door schedule line], shall be demonstrated to conform with the current published edition of EN 1935 for single-axis hinges. Conformity shall be evidenced by [test report or certificate] issued by [named body], bearing number [identifier], and covering hinge type [identifier], size [identifier] and the classification stated in Annex C.

Clause A2. The evidence required by Clause A1 shall identify the sample tested, the production site it relates to and the date of issue, and shall be current at the date of this request, or the supplier shall confirm in writing that it remains valid for the variant quoted.

Clause A3. Evidence for a multi-axis hinge, a concealed hinge system, or a pivot set does not satisfy Clause A1.

Clause A3 is the one that saves the most time. The hinge market contains products a buyer might describe loosely as a hinge but which a test report covers under a different designation. Without named exclusions you will spend a week exchanging emails about whether a concealed hinge counts.

SlotClause fragmentA compliant answer containsA non-answer contains
Requirement"demonstrated to conform with the current published edition of EN 1935"Designation, edition and an explicit verb of evidence"fully compliant", with no edition and no verb
Object"hinge type [identifier], size [identifier]"A product designation tied to a schedule line"the standard hinge in the range"
Classification"the classification stated in Annex C"A code matching what the schedule asked forA code addressing a different duty
Document type"[test report or certificate]"A named document type and its number"tested to EN 1935"
Holder"issued by [named body]"The body's name, and accreditation where relevantNo issuer named
Scope conditions"covering hinge type, size and classification"A statement that the tested sample matches the quoted oneA report for a related but different hinge
Delivery point"before [programme milestone]"A milestone tied to the order"available on request"
Consequence"[state what happens if it does not arrive]"A consequence, written before it is neededNothing

Clause group B — the locking function

This is where EN 1935 must be removed and something else inserted; the right designation depends on what the lock actually is.

EN 14846 covers building hardware locks and latches together with electromechanically operated locks and striking plates, and is the closer fit for the mechanical-electrical locking function of a battery-driven smart lock than the mechanically operated family. EN 12209 covers mechanically operated locks, latches and locking plates, with a classification code and use categories, and does not reach electronically driven locking. EN 1303 covers cylinders for locks, which matters if the lock takes a euro profile insert. EN 1906 covers lever handle and knob furniture, which matters if the escutcheon carries a lever. Where a door uses multi-point locking or a mechatronic cylinder, check the scope of the designation against the published text first.

Candidate designationObject it governsWhat it can answer for a smart lockWhat it cannot answer
EN 1935Single-axis hingesNothing about lockingThe entire locking function
EN 14846Locks, latches and electromechanically operated locks with striking platesThe mechanical and electrical locking behaviour of the quoted variantRadio, fire resistance, escape logic
EN 12209Mechanically operated locks, latches and locking platesThe mechanical part of a lock with no electrical driveAnything driven electrically or electronically
EN 1303Cylinders for locksThe cylinder, where the lock accepts oneThe lock body and any electronics
EN 1906Lever handle and knob furnitureThe furniture the operator turnsThe mechanism behind the furniture

The hinge-versus-furniture boundary is live on a smart lock door. EN 1906 Versus EN 1935: Which One Applies to Your Smart Lock Door works through that adjacency, and a schedule listing one designation for "the door hardware" gives you no way to know which physical part each piece of evidence covers.

Clause B1. The locking device shall be demonstrated to conform with the current published edition of EN 14846 for electromechanically operated locks and striking plates, for the variant quoted, by [test report] issued by [named body] bearing number [identifier].

Clause B2. Where the locking device is of a type outside the scope of Clause B1, the supplier shall state in the quotation which standard family it has been assessed against, together with the document type and identifier. A statement of conformity with a designation governing a different object does not satisfy Clause B1.

Clause B3. Where the lock includes a cylinder or insert, evidence shall be provided for that cylinder under the current published edition of EN 1303, separately identified from the lock evidence.

Clause B2 protects you from the citation error returning through the supply chain. It lets a supplier answer honestly with a different designation — many will — while making it their duty to say so in writing, in the quotation, at the point where the reader can still act.

Clause group C — the door assembly

Fire-rated openings are where the evidence chain is longest and where one designation most often gets asked to do the work of three.

The structural point is that fire resistance is not a property of a lock. It is a property of a door assembly — leaf, frame, glazing, hinges, lock, closer and how they combine — assessed by testing that assembly. EN 1634-1 is the European fire-resistance test route for door and shutter assemblies, and hardware is evaluated as part of the assembly rather than on its own. The practical consequence is that "fire-rated lock" is shorthand for something that does not exist as a standalone document. In the United States the same structure appears through NFPA 80, whose rules for fire-door hardware govern what may be fitted after acceptance.

Hold-open systems are a separate assembly question. EN 14637 covers electrically controlled hold-open systems for fire and smoke door assemblies, including the interface with fire detection and alarm, and its own scope statement places battery-only arrangements outside it. That matters commercially: a clause written as "hold-open per EN 14637" against a battery smart lock asks for a document the design cannot produce, and must be rewritten around the actual arrangement rather than left to fail later.

Closing and coordinating devices sit alongside: EN 1154 covers controlled door closing devices and excludes spring hinges, EN 1155 covers electrically powered hold-open devices for swing doors, and EN 1158 covers coordinators for double doors. Emergency escape devices form their own discipline under EN 179 for lever-operated devices and EN 1125 for panic bars, and neither is a locking requirement.

Clause C1. Where an opening in Annex C is fire rated, the door assembly as it will be installed shall be supported by evidence from the assembly's own assessment route, covering the hardware actually fitted. Evidence shall not be inferred from a component-level document.

Clause C2. Any change to the hardware specified for a fire-rated opening after the assembly evidence was issued shall be supported by written confirmation from the issuing body or the assembly's manufacturer that the changed configuration remains within the assessed scope.

Clause C3. Where an opening requires an emergency escape device, that requirement shall be specified separately from the locking requirement, under the designation applicable to the device type.

Clause C2 is where smart locks are most often exposed. A battery smart lock is mechanically and electrically different hardware from the mechanical lock the original assembly assessment assumed. Whether that change is permitted is a question for the assessment route, not for the lock supplier's catalogue.

CONFIRM-WITH-LOCAL-FIRE-ENGINEER — whether an opening in scope is fire rated, which assembly evidence the approving route accepts, whether the proposed smart lock is permissible on that assembly, and whether a change-of-hardware confirmation is required. Confirm separately for each opening type; this is not one question for the whole project.

The clauses that must not ride on EN 1935

Every smart lock also raises questions belonging to market-access regimes, not to door hardware. None is answered by a hinge designation, and each needs its own clause slot with its own named document.

Clause familyRegime or standardDocument to demandWhat it cannot be replaced by
Radio equipmentEU RED 2014/53/EU with the harmonised standards used for the radio in question, such as EN 300 328 for 2.4 GHz wideband, EN 300 440 for higher bands and ETSI EN 301 489 for radio EMCThe technical file and the supplier's declaration covering the radioA generic statement that the product is wireless
Electromagnetic compatibilityEU EMC 2014/30/EUTest evidence and the declaration for the product as marketedRadio evidence alone
Mains safety of accessoriesEU LVD 2014/35/EU, and IEC 62368-1 for mains-powered hardware and adaptorsDeclaration and test evidence for the accessory, not the battery lockThe lock's own declaration
Construction productsEU CPR 305/2011/EU, the route for door hardware sold as a construction productA Declaration of Performance where the product falls under that route, plus the declaration of conformityA declaration of conformity alone
Ingress and impactIEC 60529 and EN 62262The specific code and the test basis behind itA marketing phrase such as "weatherproof"
Environment and corrosionIEC 60068 series and ISO 9227The specific test and severity claimedA temperature range with no test named
Battery and transportIEC 62133-1 and IEC 62133-2, and UN 38.3 for transportCell or battery test evidence and the transport test summaryA statement that the cells are safe
Substance and labellingRoHS, REACH, WEEE and packaging or labelling directivesThe documentation bundle for the shipped configurationA generic compliance statement

The construction-products row surprises procurement teams most often, because a declaration of conformity and a Declaration of Performance are different documents with different legal logic, and a supplier with one does not automatically have the other.

The regime varies with destination and product, so the clause names the regime and the buyer confirms which route applies. The clause wording does not change from market to market; the document names do.

CONFIRM-WITH-LOCAL-MARKET-ACCESS-BODY — which conformity route, declaration and marking the destination market accepts for this product type and for the specific variants quoted, and whether the obligation sits with the manufacturer or with the importer of record. This is a per-product, per-destination question and it is not settled by the request for quotation.

The eight-slot clause pattern

Every clause in this article applies one reusable pattern. It turns a designation into an obligation, and it is worth copying into your own template rather than rewriting from scratch each time.

#SlotThe question it answersIf the slot is empty
1RequirementWhat must be true, in words somebody could checkThe clause cannot be verified, only believed
2ObjectExactly what the requirement attaches to, with identifiersAny similar product satisfies it
3Document typeWhich of test report, certificate, declaration or marking is acceptableA brochure satisfies it
4HolderWho issues the document, and its numberA number cannot be checked
5Edition and dateWhich edition, and how old the document isAn outdated edition is used unknowingly
6Scope conditionsVariant, production site, finish, size, handednessEvidence may cover a product you are not buying
7Delivery pointWhen the document must exist relative to the orderIt arrives after the goods
8ConsequenceWhat happens if it does not arriveThe issue is negotiated at the worst moment

A worked example shows how much one line can carry. As a template it reads: "The hinges specified in Annex C, reference [schedule line], shall be demonstrated to conform with the current published edition of EN 1935 for single-axis hinges by [test report or certificate] issued by [named body] bearing number [identifier], covering hinge type [identifier] and size [identifier] at the classification stated in Annex C, dated on or after [date], and delivered before [milestone]; failing delivery of that evidence, the Buyer may reject the affected hardware or require the supplier to obtain it at the supplier's cost."

That single sentence fills all eight slots. It is still a template, and you will adapt it, but nothing has been left to interpretation.

One warning about placeholders. A clause with unfilled placeholders is worse than no clause, because the unfilled slot hides the gap rather than exposing it. An empty bracket reads as work in progress, and work in progress gets copied forward into the issued request for quotation. Fill every slot before the document leaves your desk, or delete the clause.

Annotation — the two structures to keep separate. A clause states a requirement and names the document that evidences it. An annex states which openings and which variants the requirement applies to. Mixing them produces the classic failure where the clause reads sensibly in isolation and means nothing against the actual schedule.

Correcting a supplier schedule that repeats the error

You will receive schedules that repeat the citation error, from suppliers who are being helpful rather than evasive. The correct response is a redline, not a rejection, because the underlying product requirement is often perfectly sound.

Original textWhat it actually commits toCorrected textWho now owns the evidence
Smart lock: EN 1935 compliantNothing; the designation governs a hingeEvidence against the current published edition of EN 14846 for the variant quoted, per Clause B1Lock supplier
Hinges: EN 1935The hinge family onlyHinges in Annex C shall meet the eight-slot pattern at Clause A1Door set or ironmongery supplier
Door hardware: EN 1935 and EN 12209Two families, no objectsSplit into a hinge clause and a lock clause, each with its own objectSplit between two suppliers
Lock to be tested to EN 1935 and EN 14846A supplier's guess at your intentConfirm in writing which applies to the locking device and delete the otherLock supplier

The fourth row is the one to watch. A supplier who adds a second designation to be helpful is not always adding it correctly, and repeating the buyer's own error makes it harder to spot. Ask for one designation per object, with the object named.

There is a useful three-question test to apply to any standards line, including ones you have written yourself. Which object does this attach to. Which document demonstrates it. Whose answer is it. A line that survives all three questions is a clause. A line that fails the first question is a citation error. A line that fails the second is a marketing promise. A line that fails the third is a dispute waiting for the site.

When you issue a corrected schedule, say briefly why it changed. One paragraph explaining that a designation was attached to the wrong object and that the requirement itself is unchanged saves a great deal of confusion on the factory floor and in the supplier's commercial team.

Grading the answer against the evidence ladder

Suppliers answer in a recognisable range, best treated as a ladder rather than as yes or no. From weakest to strongest: a marketing image, a self-declared declaration of conformity, a test report on a sample, a third-party certificate with a scope and a number, a certificate covering the exact variant being quoted, and audit or production-control evidence that keeps the claim valid after the sample passed. For en 1935 smart lock rfq clause, the position on this ladder is what the purchase decision turns on.

Answer receivedRungWhat it discharges in the clauseWhat it leaves open
Product page or catalogue extractMarketing imageNothingEverything
Supplier's own declaration, signed and datedSelf-declaredThe declaration clause onlyNo third-party check of the claim
Self-declared DoCReport on a sampleThe requirement for that sampleWhether it covers the quoted variant or production site
Sample test reportCertificateThe requirement within its stated scopeVariants outside the scope
Third-party certificate with scope and numberVariant-specific certificateThe requirement as quotedWhether the claim holds at the next production run
Certificate covering the exact SKU/variant on the orderProduction controlThe requirement and its durabilityNothing outstanding for that variant

The recurring commercial failure is buying at the second or third rung and discovering at installation that nothing exists at the fifth. That discovery happens on a loading dock, in a stairwell, with a client watching. Clause language is the only place the failure can be moved earlier and made harmless.

The four documents buyers confuse most often are the test report, the certificate, the declaration of conformity and the marking on the product label. A supplier who says they have CE may mean any of them, and each carries a different weight. Your clause must name which one you accept. The catalogue of documents worth asking for is set out in What Test Reports Should I Request From a Smart Lock Factory? and What Certifications Should I Request From a Smart Lock Supplier?, and Reading a EN 1935 Test Report Page by Page: a Smart Lock Buyer Walkthrough covers what to look for once a hinge report arrives.

A clause slot moves through a fixed sequence, and the state it reaches is what you report.

stateDiagram-v2
    [*] --> Blank
    Blank --> Written: clause names object and document
    Written --> Issued: clause sent with the request for quotation
    Issued --> Answered: supplier returns a response
    Answered --> Graded: response placed on Applied to en 1935 smart lock rfq clause, the evidence-strength order runs: rung reached for the quoted variant
    Graded --> Rewritten: rung too low or object does not match
    Rewritten --> Written: clause redrafted and reissued
    Accepted --> [*]

Packaging the clause set as a document

Clauses scattered across email exchanges do not survive a programme. The clause set needs to be a document with four annexes, issued once, so every quotation comes back against the same structure and can be compared side by side.

AnnexContentsOwnerIssued
A — Clause scheduleThe normative clauses, each with its eight slots filledBuyerWith the request for quotation
B — Evidence scheduleOne line per clause: document type, acceptable holder, minimum rung, formatBuyerWith the request for quotation
C — SchedulesDoor schedule with opening references, and hardware schedule with product and variant referencesBuyer, from the site survey and door measurementWith the request for quotation
D — Supplier response scheduleA table the supplier fills in, one row per clause, naming the document suppliedSupplierWith the quotation

Annex D does more work than it looks. A supplier filling one row per clause cannot quietly attach one document to four requirements, and gaps become visible on paper rather than at handover. Annex B should state the minimum rung you will accept, the single most useful thing you can put in a request for quotation.

The covering note that goes out with the annexes should do four things. Say that you are asking for evidence against named clauses rather than marketing material. Name the milestones by which each document is required. Name the consequence of a missing document. Give a single named contact for the evidence conversation. Everything else belongs in the annexes.

Verification is separate from drafting. A supplier audit answers who is manufacturing and under what controls; an evidence review answers what exists for the quoted variant. Smart Lock Factory Audit Checklist for International Buyers covers the first, and Smart Lock RFQ Guide for International Buyers the general shape of the request.

Riders that change the clause, not the architecture

The eight-slot pattern and the three question families hold everywhere. What changes is which document fills slot three, who signs it, and which authority accepts it. The riders worth knowing in advance are these.

ContextWhat changesWhat must be confirmed locally
European Union, product sold as a construction productThe construction-products route may require a Declaration of Performance alongside the declaration of conformityWhich route the product falls under, and which declaration the authority accepts
United Kingdom after the transitionThe marking, the declaration practice, and how accepting bodies treat themWhich marking and evidence the approving body accepts
Australia and New ZealandRadio and EMC sit under one regional regime, while mains-connected equipment attracts separate state-based electrical-safety approval, so a charging adaptor can be in scope when the lock is notWhich regime applies to the lock and which to each accessory
Saudi ArabiaCertificate-of-conformity routes before shipment, per productWhether the specific variant appears on the listed route, and who holds the shipment
IndiaProduct registration and wireless equipment approval, frequently the importer's obligationWhich registrations the importer of record must hold, and the timing
Japan and KoreaRadio equipment conformity marking in one case, class-dependent conformity in the otherWhich marking the variant carries, and what the channel expects

Each row is a regulatory statement about a market, and each is a per-product question that changes with the variant, the accessories and the importer of record. None can be closed by a clause alone; each is closed by a confirmed local answer, which the clause records.

CONFIRM-WITH-LOCAL-IMPORTER-RECORD — which registrations, licences and pre-shipment certificates the importer of record is responsible for in the destination market, and which are the supplier's, so that the evidence schedule assigns each document to the correct party.

What this clause set cannot do

It is worth being blunt about the limits of the drafting device.

It cannot make a hinge standard into a lock standard. No clause wording changes what EN 1935 covers, and a beautifully written clause that attaches it to a motorised bolt is still a category error with better typography.

It cannot accept a door. Acceptance is the approving authority's decision, not the buyer's, and a clause that reads like a permission will disappoint somebody.

It cannot tell you whether an existing door's hinges need fresh evidence. On a retrofit the hinge may already be installed and covered by somebody else's documentation, and the honest clause may be a cross-reference rather than a demand. The retrofit case has its own sequence of evidence questions, set out in EN 1935 When Retrofitting Smart Locks Onto Existing Doors.

It cannot confirm that the document supplied at quotation matches the goods shipped eighteen months later. That is a production-control and audit question, and the clause only raises it early.

It cannot create evidence that does not exist. What it can do is make the absence visible while you can still choose another supplier, which is the only commercially useful thing a clause ever does.

A worked clause set for one door type

To make this concrete, here is a clause set for one common case: a new-build apartment entrance door, not fire rated, battery smart lock, mechanical closer, hinges to EN 1935, no panic hardware, and an electrical drive as the point of the product.

  1. Hinge. The hinges specified in Annex C shall be demonstrated to conform with the current published edition of EN 1935 for single-axis hinges, by test report or certificate issued by a named body bearing an identifier, covering the hinge type, size and classification stated in Annex C. — Slots 1 to 6.
  2. Hinge delivery. The evidence required by Clause 1 shall identify the sample tested, the production site and the date of issue, and be delivered before the order is released for the affected opening. — Slots 5, 6 and 7.
  3. Locking function. The locking device shall be demonstrated to conform with the current published edition of EN 14846 for electromechanically operated locks and striking plates, for the variant quoted, by test report issued by a named body bearing an identifier. — Slots 1 to 4 and 6.
  4. Variant confirmation. The supplier shall state the variant identifier to which the evidence in Clause 3 relates, and confirm in writing that the device supplied under this contract is that variant. — Slot 6.
  5. Declaration. The supplier shall provide its own declaration of conformity for the device as placed on the market, signed and dated, identifying the manufacturer or importer of record. — Slots 1, 3 and 5.
  6. Radio. Where the device contains a radio, the supplier shall provide the evidence of conformity for it, identifying the regime and the harmonised standards used, and shall state the marking applied to the product label. — Slots 1, 3 and 4.
  7. Mains accessories. Any mains-powered accessory supplied under this contract shall be evidenced separately under the electrical-safety regime applicable to it, and shall not be covered by the declaration in Clause 5. — Slot 6.
  8. Ingress. The device shall be evidenced to the ingress code stated in Annex C, with the test basis named, and no wider claim shall be made. — Slot 1.
  9. Batteries and transport. The supplier shall provide the battery test evidence and the transport test summary for the cells supplied, so the shipment can be accepted by the forwarder. — Slots 1, 3 and 4.
  10. Exclusion. Evidence relating to hinges, to door furniture, to closers, to escape devices, to the radio or to the batteries does not discharge Clause 3, and evidence relating to the locking device does not discharge Clause 1. — Slot 3.
  11. Consequence. Where a document required by Clauses 1 to 9 is not delivered by the stated milestone, the Buyer may reject the affected goods or require the supplier to obtain the evidence at the supplier's cost, and the milestone shall be treated as a condition of the affected delivery. — Slot 8.
  12. Applicability. Where a clause above does not apply to an opening or to a variant, the Annex D response schedule shall state that fact and the reason, rather than leaving the line blank. — Slot 8.

Three things change that set. If the opening is fire rated, the assembly clause enters and the hardware clause acquires a change-of-hardware confirmation. If the door is existing, the hinge clause becomes a cross-reference to the building owner's documentation. If it is a hotel room door with a card reader and a deadbolt, the credential and cylinder questions enter, and neither is answered by anything in this set.

The editorial position

A standard describes what a standard tests. It never speaks for a factory, and never for your doors. What turns a designation into something you can rely on is a clause that names the object, the document, the holder and the date, and states what happens if none of those arrive. On a smart-locked door, hold three of those apart: the hinge, the locking function and the assembly, each answered by its own document and its own party.

Write the question. Demand the document. Bind it to the variant you are buying. Date it. And say, before you need to, what happens when it does not arrive.

The general structure of a request for quotation for imported product is covered in Hotel Smart Lock RFQ Guide, and the technical fields a supplier completes sit in Smart Lock OEM Technical Specification. To test a clause set against something physical, the request a quote and order samples routes are the practical next steps: a sample in hand lets you check whether the evidence matches the hardware that arrives.

Din kundvagn
Din upplevelse på denna webbplats förbättras om du tillåter cookies. Cookiepolicy
Chat on WhatsApp