Slk 232 purchase order checklist for project orders: lock down SLK-232 hardware, access versions, door-fit evidence, power, packing, documentation.

Opublikowano: kwi 25, 2023

Ordering SLK-232: What to Lock Down on the Purchase Order

Ordering SLK-232: What to Lock Down on the Purchase Order

Procurement should release a project lock order only when every choice matches a dated record. This slk 232 purchase order checklist for project orders breaks the RFIC card lock into hardware, access, power, fit, packing and evidence. The SLK-232 keypad hotel lock record lists a flush/flip reader, 304 stainless steel, a No. 2 hotel mortise and optional passcode or smart-app versions. Treat those entries as a quotation baseline. Confirm on the dated product page for the specific SKU before a value becomes contractual, then attach the approved drawing, configuration record and supplier acknowledgement to the purchase order specification.

Direct answer. In short, slk 232 purchase order checklist for project orders is the subject of this piece. slk 232 purchase order checklist for project orders is where the work on slk 232 purchase order checklist for project orders sits. slk-232 is what has to be evidenced before anyone signs. A slk 232 purchase order checklist for project orders is a component behaviour guide. It covers limits. It covers failure modes. slk 232 purchase order checklist for project orders decides whether slk 232 purchase order checklist for project orders is acceptable for this build.

The slk 232 purchase order checklist for project orders

Use this teardown as the structure of the SLK-232 purchase order. Separate physical goods from software, documents and services. Put the lock and selected version on the product line; put management access, drawings and configuration evidence on separate lines. The hotel lock quotation should identify the SKU, version, reader configuration, finish, management route and supporting attachment.

flowchart TD
    A[Approved SKU and version] --> B[Hardware and access baseline]
    B --> C[Door fit and site evidence]
    C --> D[Acceptance and document register]
    D --> E[PO release]
    E --> F[Supplier acknowledgement]

Hardware item: panel, mortise and reader

The catalogue gives five physical anchors. Use them for testable PO wording, not to infer compatibility.

PO lineCatalogue snapshotRequired wording
Panel330 × 70 × 19 mmName dimensions; attach the matching drawing.
Body304 stainless steelName material and finish.
MortiseNo. 2 hotel mortiseAttach the mortise drawing.
ReaderRFID Hotel Card Lock, Flush / Flip ReaderState the exact reader style.
FinishSilver, stainless brushedState the selected finish.

The No. 2 mortise reference does not replace a door drawing.

Access and management item

Access needs an explicit configuration where the catalogue says optional. Name included paths and leave unselected paths out.

PO lineCatalogue snapshotRequired wording
RFID/IC cardStandardRecord as included.
PasscodeOptional (model version)State the Passcode keypad configuration or omit.
Mobile appOptional (model version)State the TTLock smart-app configuration or omit.
PlatformHotel lock management software (PC); TTLock on keypad versionsName the management route.
ConnectivityBluetoothRecord the quoted connectivity mode.
FunctionsGuest card issuance, floor/room permissions, check-in validity windows, unlock recordsMove selected functions into acceptance.

Optional paths are not included until named on the order and quotation.

Power and packing item

Power and packing are receiving controls; commercial commitments belong on separate order lines.

PO lineCatalogue snapshotRequired wording
Power4 × AA alkaline batteriesState type and quantity.
Low-battery alertStandardAdd an acceptance check.
Carton605 × 405 × 365 mmCatalogue receiving reference.
Units per export carton10 pcs/ctnSeparate units and cartons.
Gross weight per carton25.3 kgReference only.

Treat packing data as a catalogue reference, not final shipment configuration. Keep unit and carton quantities distinct and confirm the values on the dated product page for the specific SKU.

Door-fit item: evidence before compatibility

The door-fit field in the catalogue is unpopulated, so a PO built around the mortise reference alone is incomplete. Require door leaf thickness, frame rebate, backset, mortise case, latch or deadbolt, strike plate and keeper. Show spindle, cylinder collar, handle or lever, door closer, hold-open and escape-device interfaces where applicable.

Use SLK-232 Fitting Notes: What to Measure Before You Order as a measurement sheet, not compatibility approval. For retrofit work, Smart Lock Retrofit Site Survey can capture pre-order site conditions. Attach the marked schedule and require a written response to every dimensional conflict.

The same question is worked through in more detail in the smart lock wifi security. That is the same question slk 232 purchase order checklist for project orders has to answer here.

Documentation and customization item

The catalogue lists dimension drawings, an installation guide and a full datasheet on request. It also lists custom logo, finish, packaging, manuals and product configuration for distributor and project orders. The PO should identify the required revision, language, proof status and attachment date for each item; a general promise of documentation is not enough. Use SLK-232 Explained: Reading the Product Data Sheet Line by Line to reconcile each catalogue field with the order.

For the measurement side of this, see the smart lock app security. That is the same question slk 232 purchase order checklist for project orders has to answer here.

Credential acceptance item

An ordered credential path remains incomplete until it has an acceptance script. Exercise guest card issuance, floor and room permissions, check-in validity windows, unlock records, the selected passcode or app flow, the low-battery alert and mechanical override. The RFIC card lock acceptance test should record the credential used, door and room, expected result and observed result. A showroom demonstration does not replace project acceptance. Use SLK-232: Card, Code, Biometric and App Options Compared to compare the configurations before naming the selected path.

Release decision table

Use a release table to separate a complete instruction from a request for clarification.

Decision areaApprove whenReturn for clarification whenEvidence attached
HardwareVersion, reader and finish are namedA physical item remains genericControlled drawing and signed configuration
AccessIncluded and excluded paths are statedOptional is treated as includedConfiguration record
Door fitMarked schedule is attachedMortise reference is sole evidenceSupplier response to measurements
SoftwareManagement route and functions are statedTool name replaces configurationAcceptance script
PackingUnit and carton bases are statedCatalogue packing is finalReceiving schedule
DocumentsRevisions and approvals are listedFiles lack issue datesDocument register

Any unclear cell returns the line for clarification; the buyer should not repair ambiguity by assumption.

Local approval hold point

Keep product approval separate from site approval; treat door, escape, fire-safety, accessibility and radio implications as per-project questions.

CONFIRM-WITH-LOCAL-AUTHORITIES: Verify door type, escape, fire-safety, accessibility and radio requirements with the relevant local authority and project approver before release; treat each as a per-project question.

Release package

Release the PO only after the configuration record, drawing, acceptance checklist and approval owner are attached. Send the completed package through the request a quote workflow and ask for a line-by-line quotation that identifies every deviation. A strong SLK-232 purchase order lets the supplier confirm the same SKU, version, components and evidence approved by the project team.

Twój koszyk
Twoje doświadczenie na tej stronie zostanie poprawione dzięki zezwoleniu na pliki cookie Polityka plików cookie
Chat on WhatsApp