Ordering SLK-232: What to Lock Down on the Purchase Order
Procurement should release a project lock order only when every choice matches a dated record. This slk 232 purchase order checklist for project orders breaks the RFIC card lock into hardware, access, power, fit, packing and evidence. The SLK-232 keypad hotel lock record lists a flush/flip reader, 304 stainless steel, a No. 2 hotel mortise and optional passcode or smart-app versions. Treat those entries as a quotation baseline. Confirm on the dated product page for the specific SKU before a value becomes contractual, then attach the approved drawing, configuration record and supplier acknowledgement to the purchase order specification.
Direct answer. In short, slk 232 purchase order checklist for project orders is the subject of this piece. slk 232 purchase order checklist for project orders is where the work on slk 232 purchase order checklist for project orders sits. slk-232 is what has to be evidenced before anyone signs. A slk 232 purchase order checklist for project orders is a component behaviour guide. It covers limits. It covers failure modes. slk 232 purchase order checklist for project orders decides whether slk 232 purchase order checklist for project orders is acceptable for this build.
The slk 232 purchase order checklist for project orders
Use this teardown as the structure of the SLK-232 purchase order. Separate physical goods from software, documents and services. Put the lock and selected version on the product line; put management access, drawings and configuration evidence on separate lines. The hotel lock quotation should identify the SKU, version, reader configuration, finish, management route and supporting attachment.
flowchart TD
A[Approved SKU and version] --> B[Hardware and access baseline]
B --> C[Door fit and site evidence]
C --> D[Acceptance and document register]
D --> E[PO release]
E --> F[Supplier acknowledgement]
Hardware item: panel, mortise and reader
The catalogue gives five physical anchors. Use them for testable PO wording, not to infer compatibility.
| PO line | Catalogue snapshot | Required wording |
|---|---|---|
| Panel | 330 × 70 × 19 mm | Name dimensions; attach the matching drawing. |
| Body | 304 stainless steel | Name material and finish. |
| Mortise | No. 2 hotel mortise | Attach the mortise drawing. |
| Reader | RFID Hotel Card Lock, Flush / Flip Reader | State the exact reader style. |
| Finish | Silver, stainless brushed | State the selected finish. |
The No. 2 mortise reference does not replace a door drawing.
Access and management item
Access needs an explicit configuration where the catalogue says optional. Name included paths and leave unselected paths out.
| PO line | Catalogue snapshot | Required wording |
|---|---|---|
| RFID/IC card | Standard | Record as included. |
| Passcode | Optional (model version) | State the Passcode keypad configuration or omit. |
| Mobile app | Optional (model version) | State the TTLock smart-app configuration or omit. |
| Platform | Hotel lock management software (PC); TTLock on keypad versions | Name the management route. |
| Connectivity | Bluetooth | Record the quoted connectivity mode. |
| Functions | Guest card issuance, floor/room permissions, check-in validity windows, unlock records | Move selected functions into acceptance. |
Optional paths are not included until named on the order and quotation.
Power and packing item
Power and packing are receiving controls; commercial commitments belong on separate order lines.
| PO line | Catalogue snapshot | Required wording |
|---|---|---|
| Power | 4 × AA alkaline batteries | State type and quantity. |
| Low-battery alert | Standard | Add an acceptance check. |
| Carton | 605 × 405 × 365 mm | Catalogue receiving reference. |
| Units per export carton | 10 pcs/ctn | Separate units and cartons. |
| Gross weight per carton | 25.3 kg | Reference only. |
Treat packing data as a catalogue reference, not final shipment configuration. Keep unit and carton quantities distinct and confirm the values on the dated product page for the specific SKU.
Door-fit item: evidence before compatibility
The door-fit field in the catalogue is unpopulated, so a PO built around the mortise reference alone is incomplete. Require door leaf thickness, frame rebate, backset, mortise case, latch or deadbolt, strike plate and keeper. Show spindle, cylinder collar, handle or lever, door closer, hold-open and escape-device interfaces where applicable.
Use SLK-232 Fitting Notes: What to Measure Before You Order as a measurement sheet, not compatibility approval. For retrofit work, Smart Lock Retrofit Site Survey can capture pre-order site conditions. Attach the marked schedule and require a written response to every dimensional conflict.
The same question is worked through in more detail in the smart lock wifi security. That is the same question slk 232 purchase order checklist for project orders has to answer here.
Documentation and customization item
The catalogue lists dimension drawings, an installation guide and a full datasheet on request. It also lists custom logo, finish, packaging, manuals and product configuration for distributor and project orders. The PO should identify the required revision, language, proof status and attachment date for each item; a general promise of documentation is not enough. Use SLK-232 Explained: Reading the Product Data Sheet Line by Line to reconcile each catalogue field with the order.
For the measurement side of this, see the smart lock app security. That is the same question slk 232 purchase order checklist for project orders has to answer here.
Credential acceptance item
An ordered credential path remains incomplete until it has an acceptance script. Exercise guest card issuance, floor and room permissions, check-in validity windows, unlock records, the selected passcode or app flow, the low-battery alert and mechanical override. The RFIC card lock acceptance test should record the credential used, door and room, expected result and observed result. A showroom demonstration does not replace project acceptance. Use SLK-232: Card, Code, Biometric and App Options Compared to compare the configurations before naming the selected path.
Release decision table
Use a release table to separate a complete instruction from a request for clarification.
| Decision area | Approve when | Return for clarification when | Evidence attached |
|---|---|---|---|
| Hardware | Version, reader and finish are named | A physical item remains generic | Controlled drawing and signed configuration |
| Access | Included and excluded paths are stated | Optional is treated as included | Configuration record |
| Door fit | Marked schedule is attached | Mortise reference is sole evidence | Supplier response to measurements |
| Software | Management route and functions are stated | Tool name replaces configuration | Acceptance script |
| Packing | Unit and carton bases are stated | Catalogue packing is final | Receiving schedule |
| Documents | Revisions and approvals are listed | Files lack issue dates | Document register |
Any unclear cell returns the line for clarification; the buyer should not repair ambiguity by assumption.
Local approval hold point
Keep product approval separate from site approval; treat door, escape, fire-safety, accessibility and radio implications as per-project questions.
CONFIRM-WITH-LOCAL-AUTHORITIES: Verify door type, escape, fire-safety, accessibility and radio requirements with the relevant local authority and project approver before release; treat each as a per-project question.
Release package
Release the PO only after the configuration record, drawing, acceptance checklist and approval owner are attached. Send the completed package through the request a quote workflow and ask for a line-by-line quotation that identifies every deviation. A strong SLK-232 purchase order lets the supplier confirm the same SKU, version, components and evidence approved by the project team.

