Clinics door survey: A clinic door survey maps every clinic door to a fit, access and logging decision, with the measurement fields and privacy questions.

Diperbarui pada: Okt 18, 2023

Smart Locks for Clinics and Medical Offices: Door Survey and Fit Reality

Smart Locks for Clinics and Medical Offices: Door Survey and Fit Reality

A clinic's smart-lock programme starts long before anybody opens a lock catalogue. It starts with a walk round the building at the busiest hour of the morning, because that is when the doors tell you what they are: which leaf is opened four hundred times before lunch, which one gets a shoulder because the user's hands are full of gloves, and which one should never leave a record of who went in. A clinics door survey is that walk, written down in a form a supplier can price, an installer can work from and a later auditor can follow.

  • Separate the door families — sort the door population into classes that behave alike, starting from clinics door survey
  • Map each to its grade — state what clinic door list is needs before anything is quoted
  • Test the fit — record the measurement that closes clinics door survey
  • In clinics door survey, this sequence is what clinics is checked against.

The temptation in a clinic is to treat every door as the same door with a badge reader on it. That fails on three fronts at once, and each failure is expensive because it surfaces after the hardware has been ordered. Fit fails, because a clinic door population mixes painted timber, glazed partitions, aluminium frames and steel utility doors, and one measurement taken from one leaf says nothing about the next. Control fails, because a consulting room door and a controlled-substance store door are different objects with different consequences attached. And privacy fails in the most expensive direction of all: a door that logs everything produces a record of patient presence that the practice may have no lawful basis to hold.

Direct answer. A clinics door survey is a per-door decision record, not a measurement sheet. For every leaf it answers three questions — can a lock physically fit this door, who is permitted through this door, and does this door need to remember who opened it — and it records the evidence for each answer in a form that survives an installer, a supplier and a later review. The survey runs in six stages: frame the privacy question, classify the door population, capture the per-leaf fit fields, test the credential behaviour, verify the egress and interface posture, and issue the door schedule that becomes the quotation.

This guide is written for the property manager or facilities lead who has been handed a survey brief and has to return it with a door schedule attached. It works for a single consulting room above a pharmacy, a multi-room medical office on a shared floor, and a clinic group repeating the survey against different door populations at several sites. Where the clinic sits inside a hospital estate and already runs badge access, the credential side is closer to a hospital access review than to anything in hospitality. The published Smart Lock Retrofit Site Survey covers the retrofit framing wherever the building is already fitted, and the Office Smart Lock Site Survey covers the traffic-class logic a clinic borrows from a general office.

A clinic door list is a privacy map before it is a hardware list

The door population of a clinic or medical office is small enough to write on one sheet and mixed enough to punish a single-specification approach. Six door classes recur in almost every practice: consulting rooms, treatment rooms, a store room, a records room, a medication or controlled-access store, and a service or ambulance entrance. Each class carries a different user, a different rhythm, and a different consequence if it opens when it should not or fails to open when it should.

The environment is the second half of the story. Clinic surfaces get washed. Hands are gloved, wet or full. Doors are opened in a hurry, often one-handed, often while someone carries a tray. A door that has to be pulled, twisted and then shoulder-checked is a door that gets propped, and a propped door in a clinic is not a housekeeping complaint — it is a privacy failure with a clinical consequence.

Two constraints then sit on top of the physical survey, and they are the reason a clinics door survey cannot be a copy of a hotel door survey. The first is privacy of patient presence and of records: the practice knows who was in the building, and the building must reflect that knowledge without creating a record it cannot justify holding. The second is pace: doors are opened in a hurry, by people whose attention is on a patient rather than on a credential.

That produces the first question every clinic survey has to answer, and it is not a hardware question: which rooms need to know who opened them, and which need the opposite — a door that does not log? The failure mode when this is skipped is the expensive one. A single policy of "log everything, everywhere" turns a privacy-controlled environment into a place where every consultation generates a timestamped record of occupancy in a log store whose retention period nobody decided. The log becomes the risk rather than the control, and a proper survey splits the door population into two families from the first hour.

The logging decision is a design decision, not a feature request

Access-control people habitually describe logging as a feature to be switched on. In a clinic that framing is wrong twice over: once because the doors that must not log are the ones where logging does damage, and once because a record that names a credential without naming a patient is a different artefact from one that does.

So the survey treats logging as a property of the door class, decided before any model is discussed. The distinction that survives contact with a practice is simple: doors protecting records need to know who opened them, doors protecting people often must not.

Door classWhat the door protectsLogging positionWhy the difference matters
Records roomFiles and stored documentsLog by policyPresence of a credential is not presence of a patient
Controlled-access storeMedication and controlled itemsLog by policy, keep the trailAccess itself is the event under review
Treatment roomA patient during a sessionNo patient-linked logPresence data is the sensitive record, not the credential
Consulting roomA patient during a consultationNo patient-linked logSame reason; a log that shows occupancy shows attendance
Store roomConsumables and stockOptionalLow sensitivity, but useful for shrinkage work
Service and ambulance entranceUncontrolled arrival and departureLog at the perimeterEntry events matter; who stood in the corridor does not

The nuance that trips up a general template is the third column. "Log by policy" is not the same as "log": a practice may decide that the records room records access but never purges, that the controlled store records and purges on a fixed cycle, or that the service entrance records but is not reviewed. Those are governance decisions for the practice and for whoever handles its data obligations, and the survey marks them on the schedule rather than leaving them to the hardware.

How long a log is kept, who can read it and where it is held belongs to separate work, and it is worth reading before the survey is signed rather than after, because it changes which door classes need readers. Data Retention and Privacy for Smart Locks in Clinics and Medical Offices sets out the retention side, and Smart Lock Audit Logs covers how an event store is normally structured on the equipment. The survey records, per door, three things the practice must decide rather than inherit: whether the door logs, what the log is used for, and how long it is kept.

The nine door classes, and what each one demands

Before a single dimension is measured, a clinic door survey classifies the population. A clinic's classification is not a floor plan; it is a behaviour list. The useful cut is: how often the door moves, who moves it, what they are carrying, what happens when it fails, and what must be remembered afterwards.

Door classTypical user and rhythmFit driverCredential style that fitsFailure consequence
Consulting roomClinician and patient, dozens of openings a dayLeaf thickness, handle projection, quiet operationDoor already latched; badge at the entrance is enoughConsultation interrupted
Treatment roomClinician and patient, fewer openings, longer dwellLeaf thickness, closer adjustment, surface cleanabilityBadge or code at the doorProcedure interrupted
Store roomStaff and deliveries, a few openings a dayFrame rebate, backset, lever projectionKeypad or codeStock loss, low severity
Records roomPractice manager and admin, few openings a dayMortise case, cylinder, hinge side for the scannerCard credential with an audit trailRecords exposure, high severity
Controlled-access storeResponsible clinician only, tightly controlledMortise case, cylinder, mechanical overrideRestricted card or code, no shared tokenStock or medication exposure
Service and ambulance entranceOut-of-hours, contractors, couriers, occasional patient arrivalSurface, weather exposure, override methodCode plus a controlled overrideAccess denied in an emergency
Shared waiting and receptionPatients, staff, visitors, continuous trafficWear, lever, self-closing behaviourBadged entrance; no per-door readerQueue and congestion
Staff-only corridor or zoneStaff and contractors only, medium trafficLeaf, hardware coordination, hold-open behaviourZoned badgeUnauthorised access to a treatment area
Glazed partition and reception screenStaff and patientsGlazing build-up, patch fitting, patch fitting hardwareReader mounted on the frame or the stileConsultation privacy

That last row is the one a clinic forgets on the first pass and remembers on the second, because glazed partitions are listed by the architect rather than by the door supplier. Where a clinic has a glass consulting screen, the fit route is not a mortise lock but a glass patch fitting, and the measurement set is glazing thickness, patch fitting range, frame profile and swing. The published SLK-G200 Glass Door Thickness Guide and SLK-G200 Glass Door Gap Requirements cover that measurement set, and the Glass Door Smart Lock Site Survey covers the survey method for a glazed envelope.

Two environment facts cut across the whole population, and both are control questions rather than hygiene questions. Hands in a clinic are gloved, wet or occupied, so fingerprint reading at a clinic door is a convenience option to be proven on site rather than a design basis: when the pad fails, the fallback is a code on a keypad, and after that a key, so a card or a code is the dependable route. Surfaces get wiped, so the catalogue's stainless steel bodies and panels are specified for a reason, and a panel sitting proud of the leaf collects residue in the joint where the escutcheon meets the door. Clinic washdown door hardware is therefore specified on two tests at once — that the panel survives the wipe-down routine, and that the mechanical override still works afterwards — and both answers belong on the schedule.

Stage one: the brief, before anybody carries a toolkit

Most surveys fail at the brief stage, when the walk round happens with a clipboard and no agreed method, and the notes cannot be turned into a quotation because nobody agreed what a measured field meant. The order below survives a supplier call.

flowchart TD
    A[Stage 1 Privacy question framed] --> B[Stage 2 Door population classified]
    B --> C[Stage 3 Per-leaf fit fields captured]
    C --> D[Stage 4 Credential behaviour tested]
    D --> E[Stage 5 Egress and interface posture verified]
    E --> F[Stage 6 Door schedule issued]
    C --> G[Leaf fails the fit test]
    G --> B
    D --> H[Door needs a no-log route]
    H --> E

Stage 1 is a conversation, not a measurement. Before anyone visits the site, the practice answers the logging question in principle, so the surveyor knows which doors need a reader at all and which need nothing but a working lock; a clinic that decides afterwards it did not want a log on its treatment rooms has paid for readers it will not use and a schedule that has to be reissued.

Stage 2 is the classification, done on paper from the floor plan and the room list, then corrected on site, because the floor plan rarely shows the records room at all. Stage 3 is the measurement. Stage 4 is the credential walk-round, where the surveyor watches how a door is used rather than how it is described. Stage 5 is the interface and egress posture, which usually needs a phone call to the building owner rather than a tape measure. Stage 6 produces the door schedule: one line per leaf, with the fit verdict, the credential route, the logging position and the open question still to be answered.

The record each leaf has to carry

The per-leaf sheet is deliberately narrow. Nine fields, taken from the door itself, are enough to decide fit; everything else belongs in a separate schedule because it changes less often.

mindmap
  root((Per leaf record))
    Leaf
      Thickness
      Material and finish
      Swing and handing
    Frame
      Rebate depth
      Jamb condition
      Stop and seal
    Lock
      Mortise case
      Backset
      Spindle and cylinder
      Strike and keeper
    Reader
      Escutcheon zone
      Mounting side
      Cable route
    Power
      Battery compartment
      Emergency access point

The field names in that diagram are the ones the fit decision turns on, and each is measurable with a tape, a gauge or a feeler. The Smart Lock Door Measurement Guide covers the method, and the field-by-field references are Smart Lock Door Thickness Measurement, Smart Lock Backset Measurement, Smart Lock Mortise Measurement, Smart Lock Door Gap Measurement and Smart Lock Strike Plate Measurement.

FieldWhat you recordWhy it decides somethingWhat invalidates the record
Leaf thicknessMillimetres, measured at three heightsSets the whole lock family and the spindle and body lengthReading taken from the hinge side only
Leaf material and finishPainted timber, painted metal, stainless, glazedDecides the surface a reader and fingerprint pad has to live onAssumed from the room type
Swing and handingDirection, and which side the lock sits onDecides strike position, handle side and hinge-side reader placementRead off the floor plan
Rebate depthDistance from the door edge to the rebate stopDecides whether the lock body and mortise case sit without routingAssumed standard across the building
Mortise case conditionPresent, absent, or a different profileAn existing case may be reusable, replaceable or a source of failureNot opened and looked at
BacksetDistance from the door edge to the cylinder centreDecides whether a standard body fits the frameMeasured to the wrong edge
Spindle and cylinderExisting arrangement, and whether a cylinder can be re-usedDetermines whether the override key logic survivesAssumed from the door schedule
Strike and keeperType, condition, and whether the frame is reinforcedA weak strike is a security hole regardless of the lock fittedEyeballed from the open leaf
Reader mounting zoneClear space on the leaf, frame or stile, and the cable routeDecides whether a fingerprint pad or keypad can be positioned for a gloved handIgnored until the product is offered

A survey that captures these nine fields per leaf can be priced from. A survey that captures "clinics: 14 doors, mostly timber" cannot, and the difference shows up as a site variation in week three.

Fit reality: the dimensions that decide whether a lock

A clinic door population is where the assumption of one thickness across a building breaks first. Consulting rooms on an older wing may be solid timber and heavy; treatment rooms on a newer extension may be hollow-core; utility and plant doors are often steel; the reception screen is glazed. Clinic door thickness compatibility has to live with that spread, and the survey has to state which leaf each measurement came from.

Three thresholds decide most of the work. The first is whether the leaf falls inside the thickness range of any candidate lock, because that range is a per-model figure and the catalogue here records it inconsistently — one model states a range, another leaves the fit group empty. That is why the fit verdict has to be recorded against a named model and confirmed in writing rather than assumed from a family. The catalogue rows for a fingerprint model in this range, for example, record a faceplate of 227 by 66 by 20 mm with a stainless-steel mortise and a stated door thickness of 38 to 100 mm, while a stainless steel keypad and card model in the same family records its panel at 345 by 73 by 22 mm and leaves the door fit group empty. Confirm on the dated product page for the specific SKU before either figure is used to accept or reject a leaf.

The second threshold is the rebate and the body. A thicker door needs a longer body, a mortise case too deep for the rebate will not close, and a case that is too shallow leaves the bolt proud so the door will not latch under its closer. On an existing door this is where a retrofit fails, and it fails at install because the survey measured the leaf and not the rebate. The third threshold is the strike: a hollow or lightly framed leaf with a standard strike plate can be forced with a kick, whatever the reader above it says, and a survey that skipped the strike condition has produced a security claim the building cannot support.

The engineering data the supplier should send back is small and specific: a dimension drawing per model, a thickness range, a body and case size and a rebate requirement. The Smart Lock Lock Case Measurement and Smart Lock Cylinder Measurement references cover the two measurements most often skipped, and the Smart Lock Replacement Measurement Checklist is the compact sheet to send to an installer working from a survey.

Doors that must not swing open on their own

The vertical's own phrase for this is that clinic doors must not open onto a corridor on their own. It sounds like a line about door closers and it is really a line about patient presence: a consulting room door that drifts open exposes the person inside, and that exposure is a clinical privacy event rather than a building defect.

The survey therefore treats self-closing behaviour as a per-door field with three states: the leaf is closed and stays closed, the leaf is held open deliberately and returns, or the leaf is on a hold-open device released by a signal or a timer. All three are legitimate; the failure is a door in an undefined state. A closer disconnected to stop the door slamming during consultations and never reinstated is the commonest finding in a clinic of any age, and the survey records it as present, absent, or defeated.

Survey finding on the leafWhy it matters clinicallyWhat the schedule must carry
Closer present and workingLeaf returns to a controlled closed positionCloser type and whether the lock interferes with the latch
Closer present but disconnectedLeaf stands open and exposes the roomReconnection or a hold-open device, decided with the practice
No closer fittedLeaf relies on the last visitorHold-open device or a self-closing closer, decided with the building owner
Leaf on a hold-open deviceDeliberate open position during sessionsRelease method and who authorises it
Leaf already on an escape deviceLeaf is an escape routeEgress position confirmed before any reader is specified

The last row opens a question above this article's scope that cannot be skipped inside it. A door on an escape route has its locking arrangement decided by an authority rather than by a specifier, and a reader that fails on a fire signal has consequences the property manager does not carry. A clinic egress door survey line is therefore a request for a decision, not a hardware note.

CONFIRM-WITH-LOCAL-EGRESS — The building owner, the fire authority or the health-and-safety adviser decides which clinic doors are escape routes and what locking arrangement each one may have. Ask for that decision in writing before a reader is specified on any door that is on a corridor, and ask what the manual release mechanism must do when the door is powered down. Confirm the scope of the answer locally rather than assuming a national rule covers it.

Presence and records: the question to put in writing

A clinic survey that treats logging as a default creates a problem that only shows up later, usually when someone asks what the practice holds about who was in the building on a given afternoon. The trail a reader writes is a record of presence, and attached to a treatment room or a consulting room it becomes a record of patient attendance that the practice may have no decided basis to hold.

The survey should not answer that question and should not assume it. It should surface it as an explicit, written question with an owner and a date, and record the answer on the schedule as a per-door position. Three phrasings produce an answer rather than a shrug: what the practice needs to know after the fact, and for what purpose; who may see and export the record; and how long it is kept and who deletes it.

These are questions the practice, and whoever advises it on its data obligations, must answer, and the survey's role is to make sure the answer exists before the reader is specified, because a door that logs and a door that does not are different products at different points in a door schedule.

CONFIRM-WITH-LOCAL-DATA-PROTECTION-REVIEW — The data-protection reviewer or the practice's own adviser decides what may be recorded about patient presence and patient records, who may read it, how long it is kept and in which jurisdiction it is held. Ask for that decision per door class before an audit-trail reader is specified, and ask for the answer from the reviewing authority rather than from the equipment supplier.

The clinic-specific danger is worth naming plainly, because it is the failure mode this vertical carries. Logging every door creates a privacy problem of its own — a complete map of occupancy, held in a log store, with a retention period nobody chose, readable by whoever holds the administrative credential. The buildings where a patient asked not to be seen walking in are the same buildings where a full occupancy trail is generated without anyone deciding that it should be. The Audit Trail Requirements for Clinics and Medical Offices: What Records Matter piece takes that further.

The records room and the controlled store are cabinet problems too

A clinic's sensitive storage is rarely behind a door alone. The records room contains a door and a run of filing cabinets, and the controlled-access store contains a door and a medication cupboard or a locked cabinet. Surveying only the door leaves half the exposure untouched, and the half that is untouched is the half with the paperwork in it.

The cabinet question is a separate product family with its own measurement. The catalogue here includes a card-controlled cabinet lock for filing cabinets whose access field records RFID or card only, with no keypad, no fingerprint and no mobile application listed. That narrowness is a design feature rather than a limitation: a cabinet inside a controlled room needs one credential already in a pocket, not a second credential surface.

Storage elementAccess route that fitsWhat must not be assumed
Records room doorCard credential with a policy trailThat the trail may be retained indefinitely
Filing cabinets inside that roomCabinet lock body on the same cardThat the cabinet lock and the door share an audit record
Controlled-access store doorRestricted credential plus mechanical overrideThat the override can be held by the same person as the credential
Medication cupboard or cartCabinet lock body or a sealed drawerThat the cupboard lock inherits the room's credential model
Records trolley in a corridorMechanical override and a storage practiceThat a trolley is a controlled location at all

That table's last row is the one practices rarely consider and reviewers always ask about. A locked records trolley is a controlled location only if somebody locks it every time it is parked, so a survey that records the trolley as a storage point and leaves the parking rule to the practice has recorded the location without recording the control. Flag it as an operational question with an owner, in the same way the logging position is flagged. Clinic records room access control is therefore a two-part answer: the door, and the cabinet inside it.

The door-type compatibility work for these rooms — the door leaf, the frame, the case and the cylinder behind a records door — is set out separately in Door Types in Clinics and Medical Offices: Consulting Rooms and Record Stores Compatibility Notes, which is the companion to this survey for anyone specifying rather than surveying.

When the door talks to the fire panel

A clinic door that is wired to a building system has left the standalone world, and the survey has to record which doors do that. Three interactions matter in practice: a lock that releases on a fire signal so the leaf can be opened from the corridor, a held-open device released by the same signal, and a door position reported back to the panel. Each carries a different cost, approval path and failure consequence.

The survey should not specify the interface. It should establish, per door, whether the door is on a monitored system today, whether the building owner permits a reader to be interfaced with it, and who owns that decision. A clinic inside a hospital estate usually inherits a building management system it has no authority over, which changes who must sign the door specification. A free-standing practice building may have nothing, and then the question is whether the practice wants the dependency.

CONFIRM-WITH-LOCAL-FIRE-AUTHORITY — The fire authority, or the building owner's fire engineer, decides whether a clinic door may be interfaced with the fire panel, how it releases, and what the manual override must do when the system is isolated. Ask for that decision per interfaced door and keep it with the door schedule, and confirm the scope of the answer locally rather than assuming the requirement follows the product.

The state machine below is the simplest honest picture of a clinic door's day, and it is useful in the survey because it shows where the manual path has to survive a power or signal failure.

stateDiagram-v2
    [*] --> Closed
    Closed --> Unlocked: authorised credential
    Unlocked --> Closed: latch bolt engaged
    Closed --> HeldOpen: hold open device engaged
    HeldOpen --> Closed: closer recovers the leaf
    Closed --> AidedRelease: interface signal received
    AidedRelease --> Closed: reset and relatched
    Unlocked --> [*]

Three failure branches in that picture matter more than the happy path. The battery path matters when the leaf cannot be released by hand from the corridor side. The signal path matters when the interface releases the lock but the closer is still fighting the leaf. And the credential path matters when a clinician is locked out of their own treatment room with a patient in it.

Which lock family belongs to which door class

The catalogue is wide — smart door locks, fingerprint locks, keypad locks, hotel card locks, glass door locks and cabinet locks — so the survey's real work is narrowing it. The narrowing below is a decision matrix, not a product pitch: each row starts from the door class.

Door classAccess route that fitsWhy this routeModel family to evaluateConfirm before naming a model
Main staff entranceBadge or code at the door, card or codeCarries the daily volume and must survive glovesCard or keypad lockDoor thickness range and panel size
Records roomCard credential with a policy trailSmall population, high consequenceCard lock with a standalone card encoder routeWhether unlock records are retained and how
Controlled-access storeRestricted credential plus a mechanical overrideNarrow list of holders, emergency route requiredCard lock with a profile cylinderCylinder profile and override arrangement
Store roomKeypad or codeLow consequence, occasional useKeypad lockWhether the code can be changed by staff without a tool
Glazed partitionLocal reader on the glass patch fittingNo mortise case availableGlass door lockGlazing thickness range and patch fitting type
Filing cabinetsCard-controlled cabinet lockOne credential already in the pocketCabinet lock bodyWhether it accepts the same card as the door reader
Treatment and consulting roomsDoor already latched, no readerThe privacy problem is occupancy, not entrySelf-closing leaf, possibly a hold-open deviceWhether a reader is wanted at all

Three catalogue observations support the middle column without being a promise about any product. A card-and-keypad model in the hotel and smart lock families records RFID or card access, passcode, fingerprint and a mechanical override, with a 304 stainless steel body, a panel of 345 by 73 by 22 mm and 100 fingerprint templates, in passcode-keypad and app versions depending on configuration. A five-in-one model in the fingerprint family records card, passcode, fingerprint and a mechanical override, with a zinc-alloy faceplate and a stainless-steel mortise, and states its door thickness range as 38 to 100 mm, while its platform and network group is left empty. A card lock in the hotel family records card access and a mechanical override, a stainless steel and alloy body with a five-pin profile cylinder and a three-point latch, and a door thickness range of 36 to 100 mm, driven by a PC-linked card encoder needing no in-room network.

The two numbers most often quoted in a clinic quotation — the thickness range and the panel size — decide whether the door can be modified at all, and they differ from model to model inside one family. That is the argument for a survey per door and a schedule per door, rather than a specification per building. The consulting room door lock decision is usually settled by the leaf and the closer rather than by the reader, and it is the door where a wrong answer is felt by a patient in the room.

What a survey cannot tell you

An honest survey has a short list of things it cannot resolve, and a document claiming to resolve them should not be trusted with a clinic.

It cannot tell you whether a jurisdiction's privacy law permits a particular log, or whether a specific door is on an escape route, because both are answers for the building owner and the fire authority to give. It cannot tell you how a reader behaves after two years of daily disinfection, which is a field observation rather than a specification. It cannot tell you whether the practice will keep the logging policy it agreed to on the survey day, because policies drift, nor what the credential list looks like after three staff changes. And it cannot tell you that any product meets any local rule — that is a documentation question for the supplier and a review question for the authority, and the two must be kept apart.

Question the buyer is askedWho actually answers itWhat the survey records
May this door log patient presenceThe data-protection reviewerThe logging position and the date it was agreed
Is this door an escape routeThe building owner and the fire authorityWhether the answer is in hand, and its date
Will this reader read through a clinical gloveA site trialThe trial result, or an explicit "not proven"
How long is the log keptThe practice and its adviserThe agreed retention position per door class
What happens when the battery diesThe maintenance route, agreed in advanceThe manual entry method and who holds it

The last row decides whether a clinic programme is comfortable in year three. A survey that records the manual entry method for each locked door, and names who may use it, has made the out-of-hours answer explicit. A survey that leaves it blank has left it to the night, and the night is when it matters.

Turning the survey sheet into a supplier conversation

A completed survey is only useful if it converts into a document a supplier can quote against. That document is the door schedule, and it is where the survey's discipline either pays off or leaks away.

The schedule carries, per leaf: a unique reference, the room and door class, the measured fit fields, the access route, the logging position, the physical and environmental constraints, the confirmation status of any catalogue figure used, and the open questions with an owner. A supplier quoting against that schedule is quoting against evidence; a supplier quoting against a door count is guessing, and guessing on a clinic population produces a revision.

The supplier side needs its own preparation, because the questions worth asking in a technical call are easier to ask when you know what a factory check looks like. The Smart Lock Factory Audit Checklist for International Buyers covers that walk in detail. Checking the supplier itself is a separate question, and How to Verify a Smart Lock Manufacturer Before Placing an Order sets out what to ask at the factory gate. The commercial format is covered in the Smart Lock RFQ Guide for International Buyers, and the clinic-specific version of that document, with the door classes and logging positions already filled in, is the RFQ Template for Smart Locks for Clinics and Medical Offices.

Item in the supplier packWhy the clinic needs it specificallyWhere it is checked
Dimension drawing per candidate modelResolves leaf thickness, body length and panel footprint against the surveyAgainst each leaf's measured fields
Stated door thickness rangeThe first filter; a leaf outside the range is a door that needs a different routeAgainst the survey's thickness column
Body, mortise case and panel dimensionsDecides rebate conflict and reader mounting positionAgainst the rebate and reader zone fields
Strike and keeper optionsA weak frame needs reinforcement regardless of the lock above itAgainst the strike condition field
Mechanical override arrangementThe manual route when the battery dies or the credential failsAgainst the practice's out-of-hours procedure
Documentation set available on requestThe submittal needs dimension drawings, installation guides and datasheetsBefore the order, not after
Configuration options, stated per model versionThe same model name can exist in several configurationsOn the quotation, in writing

Questions a property manager asks before signing a survey

Does a clinic really need a different survey from an office? Different on three points, shared on the rest. A clinic's doors are opened with gloved hands and cannot be left to drift open, its sensitive rooms contain records rather than stock, and its occupancy data has a patient dimension that an office's does not. The medical office door fit is the same measurement work.

How many doors do we need to survey? Every leaf in the first three classes, and a representative leaf from each remaining class. A clinic with twelve consulting rooms needs all twelve measured only because leaf sizes vary; a clinic with a uniform new-build extension may need three.

What if the fit test fails on a leaf? That is a legitimate survey outcome. The schedule records the failure, the reason and the alternative route, and the alternative is often a hold-open device on a self-closing leaf rather than an electronic lock at all.

Can we skip the logging decision and add readers later? The decision is cheap when made early and expensive when made late, because adding a reader to a fitted door means a second visit, a second hardware decision and a second version of the schedule.

Should the survey include the reception screen and glazed partitions? Yes, and it should be done by whoever supplied the glazing, because patch fitting range is a glazing question before it is a lock question.

Who signs the schedule? The property manager owns the fit verdict, the practice owns the logging position, the building owner owns the egress and interface answers, and the survey is only complete when all three are on it.

How long before the schedule becomes an order? The schedule is not a quotation and a quotation is not a delivery date. Treat each as a separate document with a separate signature, and keep the survey open until the configuration for each candidate model is written down rather than assumed.

Where the survey goes next

A finished clinic survey is not a hardware list. It is a per-door statement about three things: whether a lock can physically live on that leaf, who may pass through it, and what it must remember. That is what makes a clinic access programme defensible, because it shows the reasoning rather than the shopping list.

From there the credential architecture falls out of the survey rather than preceding it: a two-door practice and a twelve-door clinic with a records room will choose differently between a standalone reader and a networked one. Choosing Between Standalone and Networked Smart Locks for Clinics and Medical Offices works through that choice, and Illustrative 4-40 Doors Smart Lock Programme for Clinics and Medical Offices: Scope Notes shows what the same survey produces at two different building sizes.

When the schedule is ready, put the door classes in front of the supplier rather than a door count, and ask for samples against the specific leaf that failed the fit test — the timber consulting room, the glazed reception screen, the steel utility door — because those leaves decide whether the rest of the survey holds. Commercial options go out through request a quote, physical samples through order samples, and what to ask the factory beforehand is set out in the Smart Lock Factory Sample Testing Guide.

Keranjang Anda
Pengalaman Anda di situs ini akan meningkatkan dengan mengizinkan cookie Kebijakan Cookie
Chat on WhatsApp