Smart locks for gyms are the lock-and-policy combination that lets a boutique studio admit the right member at the right hour, keep staff lanes off the

Zveřejněno v:: kvě 22, 2024

Smart Locks for Gyms

Smart Locks for Gyms

Smart locks for gyms are the lock-and-policy combination that lets a boutique studio admit the right member at the right hour, keep staff lanes off the member app, and keep the locker room honest — without confusing the door lock with the locker lock. The five pillars below cover what every single-discipline studio (yoga, lift, spin, martial arts) actually buys when it buys "a smart lock": 24-hour member cadence, studio-versus-floor doors, staff and trainer lanes, theft-resistant locker rooms (door lock plus locker lock, two products), and child-access rules. Each pillar is written so a gym owner or fitness-program brand operator can pick the right lock class for each door class, and so a wholesale buyer sourcing an access package can specify what their dealer needs.

This article is for boutique single-discipline gyms — the 80–600 m² studio built around one discipline (yoga, spin, HIIT, power-lifting, boxing). It is deliberately distinct from Smart Locks for Fitness Centers, which covers large multi-discipline boxes with separate lap-pool, court, and child-zone programmes; from Smart Locks for Retail Stores, which covers shopfloor-and-stockroom separation; and from Smart Locks for Staff Areas, which covers back-of-house policy regardless of industry. Where this article overlaps with those, the overlap is named and routed.

Why gyms are a door-class problem, not a lock problem

A boutique gym has five door classes on a typical floor plan: front entry (the member-facing door), studio room (the yoga room, the spin room, the lifting platform, sometimes the same room), back-of-house staff door, locker room (member cubbies), and a child-program door for after-school or weekend classes. Each of these is a different credential problem: members enter the front door between 05:30 and 22:30; the trainer enters the studio 15 minutes before class and stays through last rep; the cleaner enters the staff door between 22:30 and 23:30; the cubby holds a wallet for 45 minutes during class; the ten-year-old enters the child-program door for a one-hour block.

The hardware answer "a smart lock" is the same shape across door classes — a credential reader, a latch, a power source, a credential lane — but the policy, credential class, time window, and audit posture are different on every door. The five pillars below are written against the door-class grid, so an owner can say "this is Pillar 2 — I need a studio door the trainer can pre-program, no mobile-app for the member, mechanical override held off-site" and a wholesale buyer can say "I need five product classes across five door classes, with per-door credential policy."

The honest framing throughout: every per-model capability — credential capacity, time-bounded PIN, mobile-app lane through TTLock / Tuya / Doodle on supported models, audit-log existence, mechanical-override design, indoor-fit on a humid changeroom — must be confirmed on the product page for the exact SKU being ordered. Do not assume a feature because a sales sheet says a model is "smart". Check the model’s published specification.


Pillar 1 — 24-hour member cadence

A boutique single-discipline gym runs on a member who arrives at 05:30 for a 06:00 class and a member who stays until 22:00 for a late lift. Between those two ends, the door must admit the right member and only the right member, and between 23:00 and 05:00 it must admit the cleaner, the trainer, and no one else. That cadence is owned by the member door — the front entry and sometimes the second-floor front entry when a studio sits above retail.

What the cadence does to the lock spec

A 24-hour cadence creates four load-bearing requirements that the lock class must support. None of these is universal across the catalog; each one lives on a specific door class and must be matched there.

Cadence requirementWhat it asks the lock to doWhere it matters
Per-member time-bounded codeIssue a credential that stops working at class end, not at end of dayFront entry; member app lane
Membership-tier gatingSuspend a credential when the payment lapses, before the next visit, not the next monthFront entry
Trainer pre-class entryIssue a 15-minute-early-through-class-end window to a trainer who does not have member-app clearanceStudio room
Clean-off after-hoursIssue 23:00–23:45 lane for a cleaner; vanish by 23:46Staff door

A lock with per-credential time windows is what makes cadence work; a lock that only does "PIN works until you delete it" forces the studio to delete and reissue every member every month. Check the model’s published specification whether the SKU under evaluation supports per-credential expiry. Note that the time-bounded-PIN feature exists on some keypad and Bluetooth models and does not exist on others — using a model that lacks it for a 24-hour cadence is a common failure.

Cadence policy choices the owner must make before the order

Three policy choices travel ahead of the lock order and shape which SKU is right:

  1. Member app vs code card: a wristband or phone-as-credential app requires a Bluetooth or Wi-Fi model (TTLock / Tuya / Doodle lanes on supported models). A PIN-only studio chooses a keypad model. A wristband-heavy studio chooses an RFID model. The cadence is identical; the hardware is not.
  2. Single-door studio vs studio chain: a one-location studio needs the lock to be admin-programmable from a single laptop; a chain needs the lock to be centrally manageable across sites. Check the model’s published specification whether the model supports centralised management software, what the per-site and cross-site admin split looks like, and which management PC software is in scope.
  3. Member-self-serve or staff-issue: a 24-hour studio that wants the member to download an app and self-issue would lean mobile-app; a studio that wants reception to issue a code at 06:00 sharp wants keypad programming. Neither is better; the policy decision is what locks the SKU choice.

Cadence failure modes the policy must anticipate

A few failure modes recur across gyms that run 24-hour cadence with the wrong SKU:

  • Late-class member held outside: a member finishes at 22:15 and is charged for a class at 22:30; if the credential expires at 22:00 exactly, the door refuses them. The fix is a grace window at the back of each class, not on the credential lifetime.
  • Past-due member bypass on weak suspension: a member whose payment lapses on day 5 still uses a credential whose credential revocation depends on a manual swipe at reception. The lock is not weak here; the policy is.
  • Trainer late entry creates owner-side confusion: a trainer arrives at 05:50 for a 06:00 class. Their time-bounded window should open at 05:45 and close at 06:05. If the owner has not defined the 15-minute pre-class rule, the trainer waits in the cold.

A wholesale buyer sourcing across multiple boutiques should write these three failure modes into the procurement note. They are not a lock problem; they are a cadence-and-policy problem that the lock has to support.


Pillar 2 — Studio door versus floor door

A boutique gym typically has two doors visible to the same member: the front entry door (member or guest) and the studio room door (member + trainer, classes only). The two doors look similar and may even share the same lock model, but the policy on them is fundamentally different. Conflating them is the single most common spec mistake on boutique gym projects.

Where the policy splits

DoorAdmitted whenAdmitted byAudit postureRisk shape
Front entry05:30–22:30 (member hours); 23:00–23:45 (cleaner)Member credential; staff override; guest day-passPer-credential last-entry log; off-site backupMember-facing; failure here is a public incident
Studio roomClass window only (e.g., 06:00–07:15)Trainer pre-class open; member joins with class booking; closed between classesPer-class entry log; trainer-in / member-in / empty-countInside-the-class; failure here is a coaching or safety incident

The cleanest policy is: the front entry is a member-credential door; the studio door is a class-credential door. Members do not walk into the studio at 14:00 just because they have a member credential — they have a class booking. The lock on the studio door verifies two things: the credential is valid AND the class window is open. Check the model’s published specification that the SKU supports a time-bounded lockdown that locks the studio to class bookings only.

The studio-versus-floor honest framing

Three things a gym owner must accept about the studio door:

  1. The studio door does not double as a member-anytime door. Owners sometimes try to "save a lock" by giving members a credential that opens the studio anytime. The result is a class full of strangers during peak hours and an empty studio during off-peak. The lock supports the policy; the policy keeps the studio class-only.
  2. The studio door needs a teacher-lockout override. A trainer who runs back-to-back classes needs to flip a class to "private" without involving reception. Check the model’s published specification whether the lock supports an admin override that can be performed at the door without a phone.
  3. The studio door sees more battery cycles than the front entry. A back-to-back spin schedule (06:00, 07:00, 17:30, 18:30) means four unlocks per hour over the studio door for twelve hours. Pick a model whose battery operating cycles fit this cadence. Battery-cycle figures are model-specific and must be confirmed on the product page for the SKU under evaluation; the catalog does not publish a universal figure, and per-model cycle figures vary widely.

Equipment-room variant

A second variant is the equipment-room door (the platform, the squat rack, the bike room) which sometimes has its own lock distinct from the spin studio or yoga room. The equipment room opens only to members who have paid for the unlocks-tier; the spin studio opens to anyone booked for that class. The credential class is different, the lock class may be the same, but the policy is two-tier. Check the model’s published specification that the SKU supports tiered credential classes.


Pillar 3 — Staff and trainer lanes

The boutique gym has four staff roles, and the lock policy must give each one the right lane without giving them the union of all lanes. Conflating staff lanes is the most common cause of insider incidents in small studios.

The four staff lanes

RoleWhere they need accessWhat they should NOT haveTime window
Owner / managerEvery doorN/AAnytime the studio is open
Trainer (front desk)Front entry, studio, equipment room, locker roomMember-app credential lane (must not impersonate member)Class window only on studio; 04:30–23:00 everywhere else
CleanerFront entry, locker room, studio (after-hours vacuum)Member cubbies in working hours, office, safe22:30–23:45 nightly
Junior coach / receptionistFront entry, studio during assigned classEquipment room, locker room, officeClass window only

The lock policy asks the model to deliver three things: per-credential lane restriction (a cleaner cannot open the equipment room even with their credential in pocket), per-role time window (a junior coach's credential expires at end of class), and audit-trail separation (an owner can read who opened what, and a cleaner cannot read who opened what — distinguish the ownership of the log from the ownership of the door).

Two-card doctrine for back-of-house

A wholesale buyer sourcing across multiple studios should adopt a two-card doctrine: every back-of-house user has a primary card/credential for normal entry and a secondary card/credential held in a sealed envelope off-site, used only on lockout. This is the manager's analog of the mechanical-key envelope rule used in rental estate governance — the routine lane and the emergency lane are separate artefacts. Check the model’s published specification whether the SKU supports two-tier credential enrolment. The doctrine reduces lost-credential incidents because the routine card is in the trainer's gym bag while the emergency card stays at the owner's house.

What trainers should never hold

Three things a trainer should never be issued regardless of policy:

  • The owner-master credential. The credential that overrides all time windows must be escrowed at the owner site and withdrawn only for defined windows.
  • The mechanical override key for non-front doors. The owner holds the master override envelope; the trainer holds no override envelope.
  • A credential that survives class cancellation. When a class is cancelled, the trainer's class window closes immediately, not at the originally scheduled end.

These three rules are policy, not lock. The lock has to support them by allowing the owner to revoke at the per-credential level; check the model’s published specification.


Pillar 4 — Theft-resistant locker rooms, honestly framed

This is the pillar where gym owners are most often sold the wrong product. The framing is honest because gym locker rooms need two different products: a door lock on the locker room door that lets the right members in, and a locker lock on each individual cubby that protects a wallet, phone, and keys for 45 minutes. These are two different products, not one product doing two jobs.

The door lock for the locker room

The locker-room door is a member door in the same credential class as the front entry: a member opens it; a non-member does not. The lock is typically a keypad or RFID lock that mirrors the front entry's credential set. The risk shape on this door is "non-member walks in" not "member's wallet is stolen from inside" — non-member access is the dominant incident class at boutique-gym scale.

A door lock specification that fits a locker-room door in this context:

AttributeWhat to requireWhy
Credential classSame as front entry (PIN / card / Bluetooth app)Single enrolment across the studio; cleaner carries one credential for both doors
Mechanical overrideHeld at the owner site in a sealed envelopeAllows forced entry for medical or maintenance events
Audit logPer-credential entry logIdentifies non-member entry incidents
Time windowMember hours; cleaner after-hoursMirrors the front entry policy

The locker-room door is the same lock class as the front entry. Pick one model class across both doors; do not pick different vendors per door.

The locker lock for the cubby

The locker lock for the cubby is a different product and must be sourced on different criteria. Boutique gyms typically use one of three classes:

  • Mechanical combination lock — lowest cost, no electronics, no power, easy to replace when a member forgets the code. The honest limitation: the code is shared at the point of a sticky note or a forgotten-combination call to reception. For a 45-minute yoga class, this is often fine.
  • Electronic keypad locker lock — battery-powered, per-cubby code. The honest limitation: battery life depends on use; cubbies with low traffic need their battery checked periodically. Check the model’s published specification the SKU's expected cycles per battery set.
  • RFID / wristband locker lock — uses the same credential the member uses to enter the front door. The honest limitation: requires the studio to enrol every member's wristband in the locker system too, and the locker system must be on the same management software as the front entry.

What to honestly avoid: any "smart" locker lock that depends on a phone-as-credential for a member in the middle of a yoga class. Sweaty fingers, mats in hand, and a phone in a locker are the exact opposite of a usable credential lane. Check the model’s published specification whether the cubby lock's primary credential is a wristband, a code, a card, or a phone, and prefer a non-phone credential for the cubby.

Theft-resistant vs theft-proof — the honest framing

A locker-room setup is theft-resistant in two ways: it makes a casual theft inconvenient (the cubby code is private, the credential is bound to one wristband) and it makes a forced-entry event auditable (the cubby has a code-issue log, the door has a member-entry log). It is not theft-proof. A determined thief with a bolt-cutter defeats any cubby on the market in seconds; a determined thief who has cloned a member's wristband defeats an RFID cubby.

The owner-facing policy is honest about this: a locker is for wallet, phone, and keys during class. It is not for cash, jewellery, watches, or irreplaceable items. The cubby sign should say so in plain language.

What an owner-side locker policy looks like on paper

ElementRuleOwner-side artefact
Cubby credential classCode or wristband, never phoneWristband enrolment file; code-issuance log
Cubby maintenanceQuarterly battery test on electronic cubbiesMaintenance log signed by the cleaner
Door lock audit logPer-credential last-entry logOff-site backup, owner-readable
Forced-entry policyMechanical override on the door, bolt-cutter signage on the cubbiesSign in the locker room
The honest ceilingCubbies are theft-resistant, not theft-proofMember-facing sign in the locker room

For the door-side audit log depth, the documentation-format yardstick is the hotel-class lock spec block (SLK-9936S / SLK-9936G / SLK-9951TH / SLK-9962S class) where audit logs of up to 1,000 records are documented for hotel environments — but this figure is not portable to a gym locker-room door. Check the model’s published specification the SKU's actual audit-log capacity for the locker-room door.


Pillar 5 — Child-access rules

Boutique gyms increasingly run after-school and weekend child programmes — kids' martial arts, kids' yoga, junior spin, weekend youth lifting. The child-access pillar exists because child access is a policy problem with hardware consequences, and the consequence is sharper than adult access because the consequences of a mis-issued credential are worse.

Three rules the policy must encode

  1. The child credential is a class-bound credential, not a member credential. A child between 8 and 12 who attends kids' yoga on Saturday morning has a credential that admits them to the studio room during their class window only. They cannot enter the lobby at 19:00 on a Tuesday. Check the model’s published specification that the SKU supports per-credential class binding.
  2. A parent-escort rule is a separate credential class, not a child credential. The parent who drops off has a credential class with a 15-minute window before class and a 15-minute window after class. They enter the lobby; they do not enter the studio. The coach controls the studio door. Check the model’s published specification that the SKU supports the parent-credential class.
  3. Unaccompanied-child default is denial. The lock does not admit an unaccompanied child under 12 between 18:00 and 06:00. This is policy; the lock supports it by allowing a class-and-window override.

Three failure modes child-access rules anticipate

  • Older sibling of class age walks in pretending to be the parent. A pure-wristband lane without a parent-escort class admission lets a 14-year-old into the kids' class. The fix is the class-bound credential, not a parental PIN.
  • Class-ends-late parent left the building. A parent whose 17:30 class ends at 18:30 walks out at 18:25 expecting their child to be released by 18:35. The studio's policy on child release is not the lock's policy. Coordinate with the coach.
  • Teenager at the gym's open-gym hour. A boutique gym that sells a "teen lift" hour between 15:00 and 17:00 for 13–17-year-olds has a separate credential class with a separate time window. The teen credential does not extend to the 18:00 adult class.

What to look for in a child-program lock model

AttributeWhy it mattersHow to evaluate
Per-class enrolment capacityA kids' yoga with 12 students per classCheck the model’s published specification the SKU's max users per credential lane
Parent-escort-class distinct from student-classAvoids accidental class-mixingCheck the model’s published specification the SKU's credential-class support
Time-bounded per-class credentialOne credential admits one child to one class onlyCheck the model’s published specification the per-credential time-bound support
Audit log of who admitted whomDefensibility in case of incidentCheck the model’s published specification the SKU's audit-log existence and read-out
Off-site mechanical-override envelopeEmergency access for medical or panic eventStored at owner site, not at the studio

Honest child-programmeme rules

  • The minimum-age rule for child-member credential is set by the studio's insurer or local regulation, not the lock. Use whatever local rule applies; the lock supports whichever rule the studio picks.
  • The fingerprint-sensor age cut-off matters at about age 8. Fingerprint sensors perform poorly with very young children whose fingerprints are still developing. A keypad or RFID wristband is the right credential class for under-10s; fingerprint can fit 10+. Check the model’s published specification the SKU's age guidance if it publishes one.
  • A junior-class card or wristband should not look identical to an adult member card. Visual distinction prevents accidental class-mixing.

The honest framing on Pillar 5: child-access rules are policy with hardware support. The lock has to support per-credential time windows, class binding, parent-escort classes, and audit logs. Check the model’s published specification for each capability on the SKU you are evaluating.


Cross-pillar decision matrix

The five pillars above converge on a single SKU choice per door class. A wholesale buyer or an owner choosing across multiple SKUs should walk the matrix below and answer each cell with the SKU under consideration.

Door classPillar 1 (cadence)Pillar 2 (studio vs floor)Pillar 3 (staff lanes)Pillar 4 (locker room)Pillar 5 (child)
Front entryTime-bounded PIN; tier-gatedMember-credential doorCleaner-credential lane; trainer late-credential windowSame as studioPer-class binding for child-program
Studio roomTrainer pre-class windowClass-bound credentialTrainer-only; junior coach only during assigned classN/AClass window for kids' yoga; parent escort for parents
Equipment roomTier-gated (premium-tier members)Class-credential for personal-training slotsTrainer only outside classN/AN/A
Locker-room doorMember hours; cleaner after-hoursMirror front-entry credentialCleaner-only after-hoursMember hours; mirror front entryN/A
Child-program doorClass-bound credentialParent-escort classCoach-only during classN/AUnder-12 credential class; parent escort
Office / safe roomOwner-onlyN/AOwner + manager onlyN/AN/A

Reading the matrix row-by-row reveals that the boutique gym is five door classes, not three, and the lock package is therefore a coordinated set of SKUs (possibly one model across multiple doors with different credential enrolment, possibly several models). Both are valid; the matrix is the artefact that proves which choice was made.


Honest framing on what a smart lock does not do

Before the order is placed, four things a smart lock does not do for a boutique gym — these belong to other systems, and conflating them is the source of most failed deployments.

Claim sometimes heard in pitchWhat is actually true
"The smart lock is waterproof / sweatproof / IP-rated"Do not assume any IP / waterproof / sweatproof rating. Specific ratings are model-specific and must be confirmed on the product page; some gym-suitable models publish ratings, others do not.
"The smart locker lock replaces your member-management app"The locker lock is a credential device. Member billing, class booking, and member-app communication are separate products; the lock integrates with them on supported models via standard lanes.
"The lock comes with a warranty / cycle-life figure / certification"Cycle-life, warranty, and certification figures are not uniform across the catalog. Check the model’s published specification for the SKU under evaluation; do not assume a figure from a brochure.
"The mobile app works on every model with the catalog's app lane"Bluetooth / Wi-Fi / app functionality (TTLock / Tuya / Doodle) varies by model. Check the model’s published specification whether the SKU supports the app lane you intend to use.

These are not negative claims about the locks; they are reminders that the catalog is not uniform, and per-model facts must be confirmed.


Illustrative scenario: a 250 m² single-discipline yoga studio

Consider a 250 m² yoga studio on the second floor of a converted warehouse, open 06:00–22:00, with one large studio room (capacity 22), a small private room (capacity 4), a single front entry with reception, a single locker-room door, twelve cubbies along one wall, an office, and a kids' yoga weekend programme for ages 7–11. The studio is one location and the owner operates both the front desk and the kids' programme.

The deployment is six door classes, not one, and the matrix above walks the answer:

  • Front entry: keypad model, member-credential lane (PIN issued by front desk), cleaner after-hours window, audit log on.
  • Studio room: keypad or Bluetooth model (TTLock lane on supported models), class-bound credential, trainer pre-class window, mechanical override at owner envelope.
  • Private room: same model class, narrower credential population, owner-issued on-demand codes.
  • Locker-room door: same model class as front entry, member-credential lane, owner-side mechanical override envelope.
  • Cubbies: mechanical combination cubby locks (low-traffic 45-minute classes; phone-as-credential is impractical in the middle of a yoga class).
  • Kids' room: keypad model, parent-escort class plus student-class enrolment, audit log read by owner, mechanical override at owner envelope.

Owner-side artefacts produced: the credential enrolment spreadsheet (front desk), the cleaner-credential envelope (off-site), the master-override envelope (off-site), the per-class enrolment file (kids' programme), the cubby battery-check ledger (quarterly, signed by cleaner), the lock-installation date file (door-by-door). The studio carries no certificate of fitness, no price-quoted MOQ, and no warranty booklet — those are not part of the order; the order is per-door-class SKU + enrolment + envelope + policy file.

The studio is not a customer story; it is an illustrative scenario showing the matrix in practice on a real floor plan.


Per-SKU capability capture sheet (use when comparing three or more models)

A wholesale buyer sourcing across boutiques or an owner choosing among three SKUs should fill this capture sheet per SKU before ordering, with every cell answering "check the model’s published specification":

CapabilityFront-entry requirementStudio-room requirementLocker-room door requirementKids'-room requirement
Credential capacity1,000+200–500500+100–200
Per-credential time windowRequiredRequiredRequiredRequired
Mobile-app lane (TTLock / Tuya / Doodle)OptionalRequired on supported modelsOptionalOptional
Mechanical override designRequiredRequiredRequiredRequired
Mechanical-override envelope locationOwner off-siteOwner off-siteOwner off-siteOwner off-site
Audit log existenceRequiredRequiredRequiredRequired
Audit log record depth (events)————
Audit log read-out methodManagement softwareManagement softwareManagement softwareManagement software
Battery type (AA / built-in / pack)————
Battery operating cycles figure————
Door thickness fit range36–100 mm or model-specific36–100 mm or model-specific36–100 mm or model-specific36–100 mm or model-specific
Indoor / outdoor suitabilityIndoor; entrance canopy is a separate questionIndoorIndoor (humid changeroom is a per-model question)Indoor
Read distance for card lane—N/A—N/A
Read time for card lane—N/A—N/A
Centrally-managed across sites————

Cells marked — have no documented value in this article’s sources; obtain the figure from the supplier’s written specification.

This sheet is the procurement artefact the owner sends to the supplier. Every "check the model’s published specification" entry is the supplier's cue to point to the PDP, not to assume.


Cross-link to siblings and adjacent pillars

This article is the boutique-gym pillar among C06 applications siblings. Cross-link the deployment matrix above to:

  • Smart Locks for Fitness Centers — the large multi-discipline large-box sibling. The fitness-centre article covers separate lap-pool / court / child-zone programmes with cross-programme credential policy; the boutique-gym article covers one programme across one large studio room.
  • Smart Locks for Retail Stores — the shopfloor-vs-stockroom sibling. Where this article uses "front-entry vs studio vs locker" the retail-store article uses "shopfloor vs stockroom vs manager-office".
  • Smart Locks for Staff Areas — the staff-lanes-only sibling. Where this article threads staff lanes through Pillar 3, the staff-areas article goes wider on tiered credential classes and cleaner-lanes across industries.
  • Smart Lock Maintenance Access for Rentals — the maintenance-window-pillar sibling; useful when the gym needs per-trade, per-door, per-window credentials for a contractor entering the equipment room outside class hours.
  • Smart Lock Emergency Access for Rentals — the five-pillar emergency-governance sibling; useful when the gym adopts the mechanical-override envelope doctrine and the fire-marshal dry-run rule.
  • Electronic Keypad Entry Door Lock, Keypad RFID Hotel Door Lock, Round Fingerprint Keypad Smart Lock with TUYA Bluetooth — the category landing pages that anchor the credential-class discussion; consult each category's PDP listing for the model range inside each credential class.

Closing

A boutique single-discipline gym is not a multi-discipline large-box and not a retail shop and not a back-of-house staff room. It is a five-door-class credential problem where the front entry runs 24-hour member cadence, the studio room runs class-bound credentials, the locker room is honestly framed as door-lock-plus-cubby-lock (two products, not one), and the child-program door runs per-class credentials with a parent-escort class. The lock policy must give each door class the right lane, the right window, the right audit posture, and the right mechanical-override envelope, without giving any one user the union of all lanes.

The order is therefore not "a smart lock" but a lock package across five door classes, each package element aligned to the SKU whose per-model capabilities — credential capacity, time-bounded PIN, mobile-app lane, mechanical-override design, audit-log existence — the buyer has confirmed on the product page. Use the matrix and capture sheet above as the procurement artefact. Send the filled sheet, the policy file, and the envelope plan to the supplier when requesting a quote.

For a coordinated lock-package quote across the five door classes with per-SKU capability confirmation, the next step is the supplier quotation process: send the matrix and the capture sheet via Request a quote, and order per-door-class samples for in-house evaluation via Order samples.

Váš košík
Vaše zkušenost s tímto webem se zlepší povolením souborů cookie. Zásady cookies
Chat on WhatsApp