IEC 62368-1 Versus UN 38.3: Which One Applies to Your Smart Lock Door
Smart lock qualification often arrives as one compressed line: iec 62368 1 versus un 38 3 applicability. That line joins an electrical-safety route with a lithium-battery transport route. They are not competitors, and neither automatically covers a complete smart-lock package. IEC 62368-1 concerns the safety of audio/video and ICT equipment as its current published scope applies; UN 38.3 concerns transport testing for portable lithium cells and batteries. Depending on mains-powered accessories and battery shipment configuration, one, both, or neither route may be evidenced for specific components.
Direct answer. In brief, this article covers iec 62368 1 versus un 38 3 applicability from iec 62368 1 versus un 38 3 applicability to iec-62368-1. It states what to confirm about iec 62368 1 versus un 38 3 applicability on the dated product page where a figure is involved. an iec 62368 1 versus un 38 3 applicability works as a two-column evidence test. iec 62368 1 versus un 38 3 applicability names the documents. Each column of iec 62368 1 versus un 38 3 applicability closes with a paper.
This runbook gives the procurement manager a way to split the package, identify the actual question, request the matching evidence, and record a defensible release decision. It treats “smart lock door” as an installed outcome, not a standards-certified object. A standard describes what the standard tests; it never says that a site is certified.
CONFIRM-PER-SUPPLIER: All certification status must be supported by a named test report, an issued certificate with a verifiable number, or a signed and dated declaration.
1. Runbook outcome and control points
Run the procedure at qualification, before the purchase order or shipment instruction is released. The procurement manager owns the decision record. The supplier provides product identity and evidence, while the relevant market, regulatory, or freight owner confirms destination obligations. The controlled output identifies scope, evidence class, model match, exceptions, and approval status. The second take on iec 62368 1 versus un 38 3 applicability is IEC 62368-1 in Southeast Asia Purchasing Practice: What Buyers Are Asked to Produce. A second pass over the same material, in the fill-in workbook form, is Decoding IEC 62368-1 Class and Grade Numbers for Door Hardware. The hardware behind this is in the smart door locks.
flowchart TD
A[Lock package intake] --> B[Map exact SKU and power]
B --> C{Mains powered item present}
C -->|Yes| D[Screen IEC 62368-1 scope]
C -->|No| E[Check supplied power accessory]
D --> F[Collect named evidence]
E --> F
G[Battery present] --> H[Screen UN 38.3 transport]
F --> I[Match evidence to variant]
H --> I
I --> J{Evidence conditions met}
J -->|Yes| K[Release controlled record]
J -->|No| L[Open hold and escalate]
2. Step 1 — Freeze the exact SKU and power architecture
At intake, ask the supplier to identify every sellable lock variant and every item in its power chain. Create one line for:
- The lock model, variant, and market-facing configuration.
- The installed battery, spare battery, cell, or battery pack.
- Any charging dock, power supply, mains adapter, gateway, or other powered accessory.
- The battery quantity and the intended shipment configuration.
- The product and packaging combinations covered by the proposed evidence.
Do not let a gateway, charging accessory, or battery inherit evidence from the lock. Smart lock battery compliance begins with identifying the battery configuration rather than selecting a familiar document name.
Physical installation information may come from an Office Smart Lock Site Survey, but a site survey does not replace product-scope or test evidence. If the sellable configuration remains unidentified, place the submission on hold rather than accepting a family-level claim.
3. Step 2 — Run the IEC 62368-1 scope check
Begin with the current edition of IEC 62368-1 and its published title and scope. The IEC 62368-1 scope check is a per-product decision: determine whether the lock, gateway, adapter, or another powered item falls within that scope.
For each relevant item, request:
- Manufacturer and exact model or variant.
- Its function and connection to the lock system.
- The power arrangement presented for evaluation.
- The report, certificate, declaration, or other evidence supporting the claim.
- Any exclusions, conditions, or changes noted by the supplier.
A battery-only lock and its mains adapter must not be treated as one evidence subject. Conversely, a report for an adapter does not automatically cover the lock. Read IEC 62368-1 for Smart Locks: Scope, Tests and What the Standard Never Proves before accepting an electrical-safety response without a scope statement.
CONFIRM-WITH-LOCAL-MARKET-OWNER: Confirm which destination-market electrical-safety requirements and responsible authority apply to the exact lock and powered-accessory configuration.
4. Step 3 — Run the UN 38.3 transport screen
Use the current edition of UN 38.3 and the published scope to screen portable lithium cells and batteries used in the smart-lock package. This is a transport-testing question. A forwarder commonly requests the evidence before accepting a lithium-containing shipment, so the forwarder or freight owner should review the battery and shipment configuration.
Build the request around:
- Cell or battery manufacturer, model, chemistry, and identification markings.
- Whether the battery is installed, contained in equipment, packed with equipment, or shipped separately.
- The number of batteries and the proposed transport packaging.
- The exact test sample covered by the UN 38.3 test report.
- The report identifier, issue date, and laboratory information.
A report on one battery sample is not automatically evidence for every cell, pack, quantity, or shipment arrangement. The required lithium battery transport evidence must match the item being offered.
CONFIRM-WITH-LOCAL-FREIGHT-OWNER: Confirm the transport classification, permitted packaging, marks, documents, and responsible party for the exact lithium-battery configuration and destination.
5. Compare the two decisions without merging them
| Decision point | IEC 62368-1 route | UN 38.3 route |
|---|---|---|
| Primary question | Is the relevant powered equipment within the current electrical-safety scope? | Is the lithium cell or battery within the current transport-test scope? |
| Typical evidence | Equipment test report, scoped certificate, or declaration tied to the applicable edition | Test report tied to the battery or pack sample and shipment-relevant configuration |
| Common supplied item | Mains-powered hardware or adapter that may fall within ICT or AV equipment scope | Installed, contained, packed-with, or separately shipped lithium battery |
| What it does not establish | Shipment acceptance or transport classification | Installed-door performance, market access, or electrical safety of another component |
| Release action | Record a separate scope and evidence decision | Record a separate battery and transport-evidence decision |
A single submission can therefore carry an IEC decision, a UN decision, and a destination-market decision. Do not collapse them into one field marked “compliant.” If both routes apply to different parts of the package, retain both evidence chains.
6. Name the evidence before trusting it
A supplier saying it has “CE” or “UN 38.3” may be referring to different documents. Ask the supplier to classify every item in the supplier conformity documents bundle using this control table.
| Document class | What it actually is | Procurement question |
|---|---|---|
| Test report | Someone tested a sample | Which sample, model, edition, result, and report identifier are covered? |
| Certificate | A body attests conformity within a stated scope | What is the issuer, verifiable number, scope, and validity period? |
| Declaration of conformity | The manufacturer or importer makes its own legal claim | Is it signed, dated, and issued by the party accepting responsibility? |
| Marking | A market-access mark is printed on the product or label | Does the marking identify this item, and which underlying documents support it? |
Apply marketing image → self-declared DoC → test report on a sample → third-party certificate with scope + number → certificate covering the exact SKU/variant you are buying → production-control evidence that keeps the certificate valid after the sample passed being purchased → audit or production-control evidence that keeps it valid after the sample passed**. For iec 62368 1 versus un 38 3 applicability, the position on this ladder is what the purchase decision turns on.
The rungs that decide iec 62368 1 versus un 38 3 applicability are the ones issued under iec 62368 1; a file for a different scheme does not move the position on this ladder.
The recurring commercial failure is qualifying at the second or third rung and discovering at installation that nothing covers the purchased variant. For a detailed file review, use Reading an IEC 62368-1 Test Report Page by Page: A Smart Lock Buyer Walkthrough.
CONFIRM-WITH-LOCAL-IMPORTER: Confirm whether the destination market requires the importer to hold, sign, submit, or retain any declaration or market-access evidence.
7. Match evidence to the purchased variant
Evidence applies only as far as its stated sample and scope. Before approving a file, compare the offer with the report or certificate across five controls:
- Exact lock model, accessory model, and sellable variant.
- Hardware and power configuration presented for evaluation.
- Battery, cell, or pack configuration relevant to the test.
- Components and construction covered by the tested sample.
- Production-control arrangements intended to maintain conformity after sample testing.
A certificate covering the exact SKU or variant is stronger than a generic family statement. Where evidence stops at sample testing, request the production-control evidence that keeps it valid after the sample passed. If the supplier cannot explain the link between the sample and the delivered product, retain the hold.
8. Put two schedules in the RFQ
For iec 62368 1 versus un 38 3 applicability, use two completed schedules rather than one combined certification field.
Schedule A — IEC 62368-1 electrical-safety route
- Equipment model, function, power arrangement, and current-edition scope decision.
- Evidence class, identifier, issuing body, sample identity, and scope.
- Exceptions, accessories, and configuration conditions.
Schedule B — UN 38.3 battery-transport route
- Cell or pack model, chemistry, quantity, and intended transport configuration.
- Evidence class, report identifier, test-sample identity, and laboratory details.
- Forwarder questions, marks, packaging, and unresolved shipment conditions.
Add a document index that separates the test report, certificate, declaration of conformity, and marking. Also require the supplier to identify changed components, firmware-independent construction changes, or new battery identities that invalidate the submitted link. The clause structure in The Mains-Powered Equipment Safety Route in a Smart Lock RFQ: The Clause a Buyer Can Actually Answer can support the electrical-safety schedule, but the battery schedule should remain separate.
9. Apply holds instead of accepting ambiguous claims
Use a short hold code whenever the evidence cannot support a release decision:
- H-SCOPE: The published title or scope does not clearly cover the supplied item.
- H-SKU: The document refers to an unidentified model, sample, or variant.
- H-DOC: The submission mixes a report, certificate, declaration, or marking without identifying each document.
- H-SHIP: The battery and shipment configuration have not been accepted by the freight owner.
For each hold, record the missing evidence, owner, requested response, and closure criterion. Do not convert a hold into approval because a sales representative describes the product as certified. The examples in Three Ways IEC 62368-1 Evidence Disappoints Smart Lock Buyers provide a useful escalation reference.
10. Keep the product, shipment, and installed door separate
The phrase “smart lock door” can wrongly imply that one standards document approves the finished installation. Keep three objects distinct:
- The product evidence covers the supplied lock or powered accessory.
- The transport evidence covers the lithium battery in the offered shipment configuration.
- The installed-door evidence covers site and assembly conditions.
Lock performance, fire-door assembly, EMC or radio, and electrical safety answer different questions. A photograph of an installed lock cannot convert a sample report into exact-variant evidence, while a retrofit survey cannot establish product conformity. For an existing opening, use the Smart Lock Retrofit Site Survey to capture installation conditions separately from the standards file.
Readers comparing approaches usually start with smart locks for office glass doors. That is the same question iec 62368 1 versus un 38 3 applicability has to answer here.CONFIRM-WITH-LOCAL-BUILDING-OWNER: Confirm any destination-specific fire, egress, or installed-door requirements that remain outside the IEC 62368-1 and UN 38.3 evidence files.
11. Release the qualification record
The procurement qualification record should be released only when it contains:
- The exact SKU, battery, and powered-accessory map.
- A documented IEC 62368-1 scope decision and linked evidence, or a reasoned not-applicable entry.
- A documented UN 38.3 transport decision and linked evidence, or a reasoned not-applicable entry.
- Separately named test reports, certificates, declarations, and markings.
- Evidence matching the tested or certified sample and the purchased variant.
- Production-control evidence where the submitted file stops at sample testing.
- Completed market, importer, and freight confirmations where required.
- A closed hold log showing the evidence received against each open issue.
Use four controlled outcomes: released for the stated configuration, released subject to a documented condition, not applicable with a cited scope rationale, or hold. Record the approving owner and date for each outcome.
Before adding the smart lock to an approved procurement list, send one component map, two evidence schedules, one document index, and the closed hold log. That package lets the supplier answer the exact question and lets procurement identify which evidence remains valid for the door being bought.
A quote request turns the written requirement into something a supplier can price: request a quote.

