RFQ Template for Smart Locks for Independent Boutique Hotels
To: Head of Operations and owner-operator, [property or small group]From: Procurement lead, [name]Date: [issue date]Subject: Request for quotation — electronic door locks and access control for guest rooms, service doors, shopfront and terraceResponse format: This template completed in full, one line per surveyed door, with dated product sheets attachedSite survey: Offered by appointment before responses are returnedDecision point: Trial on two representative doors, then a written award note
This memo carries the request itself. It is the boutique hotels rfq template in use on this property, with the placeholders left in so a second site can reuse it without a rewrite.
Direct answer. Short version — boutique hotels rfq template is treated here as boutique hotels rfq template first. boutique-hotels comes second. The evidence for boutique hotels rfq template is named in the sections below. A boutique hotels rfq template ties every door class to a requirement. boutique hotels rfq template decides which class ends up in the boutique hotels rfq template specification.
- Cluster the openings — sort the door population into classes that behave alike, starting from boutique hotels rfq template
- Assign each class — state what boutique-hotels needs before anything is quoted
- Document the fit — record the measurement that closes boutique hotels rfq template
- For boutique hotels rfq template, the order below is fixed and boutique hotels is the reference point.
A template earns its length only when it removes a decision from the negotiation and puts it in writing. Every section below exists because a boutique property has a habit of answering it badly: a heritage building with thick walls, a mix of door thicknesses, no room for a strike box, no rewiring, and a landlord who does not own the locks. The request asks for door-level answers, credential rules and installation method, and it rejects any answer that cannot be traced to a numbered door.
Why this request is written before the price column
Most quotations that fail in a small hotel do not fail on price. They fail because the door was never described, so the product was priced against an assumption. A boutique property is not a repeated room: it is a heritage structure with thick walls, a spread of door thicknesses, a door that opens onto a corridor, a glazed shopfront, and a terrace door that meets weather. There may be no room for a strike box, the wiring cannot be run, and the landlord does not own the locks. Any one of those facts changes the answer completely.
So this template is built around the door rather than around a product. It asks each supplier to work from the survey line numbers and to state, door by door, what they can supply, what they cannot, and what they need from us before anything can be installed. A response that cannot be keyed to the survey is not a response; it is a brochure. The template also protects the buyer's time, because the questions are written once, every supplier answers the same ones, and the comparison happens across schedules rather than across sales conversations. The model this procurement ends up comparing is the SLK-118 RFID Card Lock for Hotels and B&Bs — check the dated product page for the specific SKU.
Who this memo is addressed to and the decision it supports
Three people read this. The owner-operator wants a defensible answer to the question that actually governs the project: which doors can we change, and what will it cost us to run them. The head of operations wants to know what happens at check-out on a Tuesday night with one person on duty. The supplier's estimator wants enough detail to quote without a site visit that nobody can arrange.
The decision this request supports is a trial rather than an award. Two doors are selected for the trial — one guest room and one service door, because a hotel's failure modes live in the gap between them — and one candidate configuration is fitted to each. The trial produces a written note comparing fit, guest handling, staff handling and failure behaviour. Only after that note does a purchase order exist. Nothing in this template asks for a discount, a price hold or a delivery commitment; those conversations happen after the technical answers are on the table.
The conditions the template takes
These are operating realities of the property, not assumptions from a brochure. Each one is testable, so each one appears as a question further down.
| Condition carried by the building | How the template tests it | Why it changes the answer |
|---|---|---|
| Thick walls and heavy construction | Supplier states the radio method they will use and what they need on site to test it | Range and reliability follow the wall construction, not the product name |
| A spread of door thicknesses | Responses are keyed to survey line numbers, each carrying its own thickness | A schedule that says "all doors" cannot be checked by anyone |
| No space for a strike box | Supplier states the fixing method: mortise, surface case or faceplate | The fixing method decides whether a door can be changed at all |
| The building cannot be rewired | Part three asks for power and cabling requirements per door | Wired options are simply unusable on some doors |
| The landlord does not own the locks | Part one asks which doors the operator may alter | Alteration without ownership becomes a dispute, not an installation |
| A small team runs the property | Parts two and four assign credential administration and battery changes to named roles | If no named person can perform a task, the task will not happen |
Part one: the door and hardware data a supplier must price
Every response is a door-by-door schedule. A supplier who cannot fill a line tells us something useful, and it is better to learn that before an order than after.
| Survey line | What the supplier must state | What a wrong answer costs |
|---|---|---|
| Door leaf and thickness | The range of leaf thicknesses the quoted configuration fits | Doors drop out of scope one at a time, after the order |
| Frame and rebate | Whether a mortice lock, surface case or strike box is needed and what the frame allows | A door that cannot take the lock is a visit nobody can arrange |
| Existing mechanical lock | Whether the cylinder, latch and deadbolt are retained, replaced or by-passed | A room door that cannot be secured from inside is not a guest door |
| Existing strike or reader | Whether installed hardware is reused, and who re-cables it | Two systems on one door means two failure points and two invoices |
| Power at the door | Battery or mains, and what a flat battery looks like in service | The difference between a guest swapping a pack and an engineer call-out |
| Glazed doors and the shopfront | What is proposed and how the reader and faceplate are fixed | Appearance is part of the acceptance test in a small property |
| Fire door status | What evidence will be provided for any door that is a fire door | An unresolved question surfaces at the submittal, not at the quote |
| Terrace and exposed doors | What enclosure, seal and weather protection is proposed | Exposed doors fail in ways indoor doors never do |
Where a catalogue figure affects the decision — door thickness, lock case dimensions, read range — it is confirmed on the dated product page for the specific SKU, not recited from a summary sheet. Two published survey instruments are worth using before this request goes out: Office Smart Lock Site Survey for a commercial-grade door population and Smart Lock Retrofit Site Survey for buildings where the locks are being replaced in place. The survey format for this vertical is set out separately in Smart Locks for Independent Boutique Hotels: Door Survey and Fit Reality; this template consumes that output rather than repeating it.
Part two: credential scope and the rules behind each door group
A lock specification that stops at the reader leaves the operating model undefined. The table below is the credential schedule the supplier must complete, door group by door group, with the rule the system has to enforce and the role that owns it.
| Door group | Credential in normal use | Rule the system must enforce | Role that administers it |
|---|---|---|---|
| Guest rooms | Card, code or phone credential | Expiry tied to the stay, including an extended stay | Night duty or reception |
| Back-of-house corridor | Staff credential | Revocation at contract end or season boundary | House manager |
| Service doors | Keypad code | A written rotation rule, with the previous code disabled | House manager |
| Shopfront | Phone-based release with a physical fallback | A route that works with no phone and no signal | Owner-operator |
| Terrace | Staff credential, guests by arrangement | Time-bound access rather than a standing grant | Owner-operator |
| Owner and manager master | Physical override plus master credential | Held by a named person, with an issue and return log | Owner-operator |
Two of these rules belong in the request itself rather than in a later policy document. The first is offline behaviour: a small property loses connectivity, and the question to put in writing is which functions persist when the network is gone, and which doors are unaffected because they never needed it. The second is the audit scope. The request asks which doors must record an opening and which must deliberately not, because a room door that logs every entry turns a privacy expectation into a data problem. The wider treatment of guest records sits in Data Retention and Privacy for Smart Locks in Independent Boutique Hotels, and the master-credential reasoning sits in Smart Lock Key Control and Master Key Decisions for Independent Boutique Hotels. Contractor and third-party entry, which sits between the owner master and the guest credential, is covered in Contractor and Third-Party Access for Independent Boutique Hotels.
Part three: installation method, power and system integration
This is the section that fails most often in older buildings, so it is the section suppliers must answer in the most detail. It asks for the fixing method on each door, whether cabling is required at each reader position, whether the quoted configuration draws power from the door or from a battery, what happens to the door when a battery is flat, and what the supplier needs on site to prove the radio link works in a thick-walled building rather than in a showroom. On a terrace door or a shopfront, it asks for the enclosure and sealing detail and for the visual treatment of the reader and faceplate.
Integration questions are answered with ecosystem names more often than with interface descriptions. The template therefore asks for something testable instead: the interface method, the data exchanged, the side of the integration the supplier supports, and what they need from the property management system. If no system integration is in scope for the first phase, say so on the request so suppliers do not price two worlds.
Two further questions sit in this part. First, whether the locks are standalone or connected, since that decision changes the credential administration effort for a small team and is set out in Choosing Between Standalone and Networked Smart Locks for Independent Boutique Hotels. Second, how the existing mechanical keys are handled during the changeover — kept as a fallback, phased out, or returned — which is covered in Migration from Mechanical Keys to Smart Locks in Independent Boutique Hotels. The wider choice of interface for a building like this is set out in Integration Options for Smart Locks in Independent Boutique Hotels Operations.
Part four: handover, training, service and the parts we hold
A system that nobody at the property can administer is a system that stops working in the second month. Part four asks for the training scope in writing: who is trained, on what, for how long, and whether a second person is covered so the knowledge is not sitting in one head. For a property with an owner-operator and a part-time engineer, that handover detail is the difference between a working building and an escalating support queue, and the fuller treatment sits in Training Owner-Operator and a Part-Time Engineer to Run Smart Locks in Independent Boutique Hotels.
The same part asks for the battery change method: whether it is a guest action, a staff action or an engineer visit, how long a pack lasts in that door under real use, and how a guest is told. It asks for the spare-parts position — which parts the property holds, at what depth, and how a replacement is obtained — which is set out in Spare Parts and Service Model for Independent Boutique Hotels Sites. Finally it lists the deliverables the installer hands over: credentials issued, codes changed, documentation delivered, and the commissioning record signed, following the pattern in Installer Handover and Commissioning for Independent Boutique Hotels.
Part five: evidence, egress and the sign-off we still
Part five is deliberately written as questions and required evidence, because the answers belong to named authorities rather than to a supplier. It asks which doors sit on an egress route, what locking arrangement is acceptable on those doors, and what evidence the fire authority expects for each one. It asks whether any door in the survey is a fire door and what documentation the supplier holds for it. It asks which body signs off an alteration to a door or frame in this building, and what evidence that body wants to see before the work starts. It asks how a guest who cannot use a credential still leaves the room.
CONFIRM-WITH-LOCAL-FIRE-AUTHORITY: confirm which doors are on an egress route, what locking arrangement is acceptable on each, and the evidence the fire authority expects for the arrangement you propose.
CONFIRM-WITH-LOCAL-BUILDING-AUTHORITY: confirm which body signs off alterations to doors, frames and glazing in this building, and what evidence it requires before installation.
CONFIRM-WITH-LOCAL-DATA-PROTECTION-REVIEWER: confirm which guest records the credential system may hold, who reviews them, and how long they may be retained.
No supplier answers these questions with a certificate on the spot, and the template does not ask them to. It asks which authority signs off, what evidence they will provide, and where in the process that evidence is inserted. Where a product specification is the deciding factor, confirm it on the dated product page for the specific SKU rather than accepting a summary sheet. The emergency and out-of-hours route, which overlaps this part, is set out in Emergency and Out-of-Hours Access for Independent Boutique Hotels.
The evaluation path this template drives
The request exists to move a decision forward in steps, each with an owner, rather than to collect brochures.
flowchart TD
A[Survey line list issued] --> B[Request sent with template]
B --> C[Supplier returns door schedule]
C --> D[Fit review against survey]
D --> E[Questions raised and answered]
E --> F[Trial fit on two doors]
F --> G[Trial note written]
G --> H[Award or re-survey]
H --> I[Installation and handover]
Two properties of this path matter. The fit review happens against the survey line numbers, not against the supplier's own numbering, which is what makes the responses comparable. And the award is deliberately placed after a trial, because a trial produces evidence about fit and handling that no specification can substitute for. The credential cycle below is the part of the operating model a trial must exercise end to end.
flowchart LR
A[Credential issued] --> B[Stay or shift in progress]
B --> C[Expiry or revocation]
C --> D[Access removed]
D --> A
Scoring the returned schedules against our own priorities
The weighting below is this buyer's own planning assumption for a property of this type. It is not a benchmark, not an industry figure and not a score published by any third party. It exists so that two suppliers who answered in different styles can still be compared on the same grounds.
| Criterion | What a strong answer looks like | Weighting | Where you check it |
|---|---|---|---|
| Fit to the surveyed doors | Every line answered, with out-of-scope doors named explicitly | High | Part one against the survey |
| Credential rules match the operating model | Expiry, rotation and revocation written down per door group | High | Part two |
| Failure and override route | One clear route per door group, including the flat-battery case | High | Parts two and five |
| Installation method | Fixing, cabling and landlord constraints stated per door | High | Parts one and three |
| Service and spares | Named parts, a holding list and a replacement route | Medium | Part four |
| Documentation and training | Deliverables listed rather than promised in a paragraph | Medium | Part four |
| Evidence for local sign-off | Evidence named against each question we asked | Medium | Part five |
| Commercial clarity | Priced per survey line, with exclusions and assumptions stated | Medium | The response itself |
| Integration scope | Interface method stated and unsupported items declared | Low unless a system is in scope | Part three |
Reading a returned schedule line by line
The value of a fixed template is visible in the review, not in the issue. Below is an illustrative reading of one returned schedule against the request above. It is a working example, not a case study, and no supplier is named.
| Line in the request | What the schedule said | Gap it leaves | Action before the trial |
|---|---|---|---|
| Leaf thickness per door | Quoted for one mid-range thickness | Two surveyed leaves fall outside it | Ask which doors are excluded and have them priced separately |
| Service door code | A keypad and a staff code | No rotation rule, and no statement that the old code stops working | Require the rotation rule in writing |
| Shopfront | An app-based release | No route for a person on duty with no phone | Require a physical fallback and test it at the door |
| Terrace | The same model quoted for guest rooms | No statement about exposure or sealing | Require a written suitability statement or drop the door from scope |
| Offline behaviour | Stated as working offline | No list of which functions persist | Require the persisted function list |
Each action is small, and each one prevents a line item that would otherwise be discovered during a stay rather than during a review. The supplier-question discipline that sits underneath this review is set out in Questions to Ask a Supplier Before Choosing Locks for Independent Boutique Hotels, and the criteria the wider selection should meet are in Smart Lock Vendor Selection Criteria for Independent Boutique Hotels.
The failure modes this template is built to expose
- A survey that reports one door thickness for the whole property, so half the schedule is fiction.
- A guest credential that still opens a room after check-out because nobody assigned the expiry.
- A service code that no one owns and nobody rotates.
- A shopfront that needs a phone the person on duty does not carry.
- A landlord who learns about an altered door after the work is done.
- An audit trail switched on at every door, including the room a guest expects to be private.
- A terrace lock specified exactly as if it were an indoor lock.
- A battery change modelled as an engineer visit because nobody asked how the change is made.
Each of these is cheap to prevent at the request stage and expensive to discover in service. The physical load side of the same problem, including how misuse and weather treat exposed doors, is covered in Vandalism, Misuse and Environmental Load on Locks in Independent Boutique Hotels.
Questions this memo deliberately leaves open
These are owner decisions, and the template says so rather than hiding them in an appendix.
- Which doors are in scope for the first phase, and which wait.
- What the landlord permits, and in what form that permission is recorded.
- Which body signs off the alteration, and what evidence it expects.
- Which guest records the credential system may hold, and who reviews them.
- Whether the locks run standalone or connect to the property management system.
- Who owns credential administration when the house manager is away.
- How a phased changeover protects the building while the work moves from door to door.
A single property usually answers these faster than a group does, because one person holds the whole picture. If the group is growing, the per-property template should be issued once and reused, which is the approach described in Scaling from One Site to Many: Smart Locks for Independent Boutique Hotels.
Readers comparing approaches usually start with smart lock hotel security requirements. That is the same question boutique hotels rfq template has to answer here.
Next actions and how to ask for pricing
- Issue the door survey and number the lines; the template's Part one is written against those numbers.
- Confirm with the landlord which doors the operator may alter, and record the answer in writing.
- Send the request with this template to a shortlist, with the response format stated at the top and a return date in the covering note.
- Hold the fit review against the survey line numbers, and answer only the gaps.
- Fit the trial configuration to one guest room door and one service door, then write the trial note.
- Award only after the note exists, and keep the note with the survey and the returned schedules.
Pricing is requested separately from this template, once the door scope is fixed, through the request route at request a quote. Any figure that drives a purchase decision — lock case dimensions, read range, cycle counts, battery life — is confirmed on the dated product page for the specific SKU rather than carried over from a summary sheet. Every companion note in the boutique-hotels series is linked below so the request can be read alongside the operating material it depends on.
The reading list for the people signing this
- Smart Locks for Independent Boutique Hotels: Door Survey and Fit Reality — the survey output Part one is written against.
- Smart Lock Key Control and Master Key Decisions for Independent Boutique Hotels — master credential reasoning behind Part two.
- Smart Locks for Independent Boutique Hotels: Credential Model that Survives Thin Staffing and Manual Processes — the credential model Part two asks suppliers to match.
- Contractor and Third-Party Access for Independent Boutique Hotels — the middle credential band between owner and guest.
- Integration Options for Smart Locks in Independent Boutique Hotels Operations — the interface choice behind Part three.
- Choosing Between Standalone and Networked Smart Locks for Independent Boutique Hotels — the standalone decision that changes administration effort.
- Battery and Power Programme for Smart Locks in Independent Boutique Hotels — the power question raised in Part four.
- Door Types in Independent Boutique Hotels: Heritage and Non-Standard Door Sets Compatibility Notes — the door families behind the survey lines.
- Audit Trail Requirements for Independent Boutique Hotels: What Records Matter — the audit scope question in Part two.
- Total Cost Thinking for Smart Locks in Independent Boutique Hotels — the running-cost view that sits behind the award note.
- Illustrative 12-60 Keys Smart Lock Programme for Independent Boutique Hotels: Scope Notes — how a programme of this scale is scoped in practice.
- Smart Locks and No In-House Technical Depth: A Practical Control Plan — what to do when nobody on site can hold the detail.

