As/nzs 4145.2 in a Smart Lock Tender Pack: The Evidence Checklist
Use this runbook when preparing as nzs 4145 2 smart lock tender evidence for a specified smart lock. The smart lock tender evidence checklist turns a supplier submission into a traceable register: identify what the requested standard tests, classify each document, connect it to the offered configuration, and approve or return it. This procedure controls the tender annex; it does not convert a sample test into approval of a site or a product.
Direct answer. To put it plainly: as nzs 4145 2 smart lock tender evidence has to hold for as nzs 4145 2 smart lock tender evidence. as-nzs-4145-2 has to hold at the same time. The sections below describe the order as nzs 4145 2 smart lock tender evidence is settled in. An as nzs 4145 2 smart lock tender evidence separates what a supplier can show from what only a body can confirm. as nzs 4145 2 smart lock tender evidence is where the two columns start. Each as nzs 4145 2 smart lock tender evidence claim names its document.
as nzs 4145 2 smart lock tender evidence is taken here as as nzs 4145 2 smart lock tender evidence, deliberately narrowly. It is a working definition of as nzs 4145 2 smart lock tender evidence. It is specific to this market and product, and it is not a statutory or certified term.
Runbook control, roles and release rule
Qualification starts when the tender team receives a request for AS/NZS 4145.2 evidence. Set the Procurement Manager as evidence-register owner. The engineer or security reviewer checks technical scope; the document controller checks identity, completeness and version control; legal or contract staff review declarations where required. The release record names each role. Use as-nzs-4145-2 as the controlled designation in file names so all annexes point back to one requirement. The build options sit in the smart door locks.
CONFIRM-WITH-LOCAL-AUTHORITY: Confirm the current edition, published title, scope and project applicability of AS/NZS 4145.2 with the relevant Australian or New Zealand authority or publisher.
The inputs are the solicitation, offered smart-lock configuration, door schedule and supplier submission. The outputs are an indexed evidence pack, traceability matrix, exception log and signed release decision. A missing scope statement, ambiguous document or unmatched product is a stop condition. Do not let an email thread act as the evidence register.
Stage 1 — Freeze the tender requirement
Create one requirement line per offered lock and document class. Separate mandatory, requested and optional evidence so an attractive but non-mandatory document cannot obscure a missing mandatory item. Use a status of PASS, HOLD or RETURN only after the stated check has been completed.
| Requirement field | Freeze this wording | Pass condition |
|---|---|---|
| Designation | Full designation and current edition | Published title and scope are identified |
| Scope | Security-property question for the lock | Boundary and exclusions are recorded |
| Product | Exact offered model and variant | Product identifier is recorded |
| Documents | Exact requested document classes | Report, certificate, declaration and marking remain separate |
| Door and use | Intended door and use | Project scope is recorded |
Write each requirement so it can be answered by a named file and field. Replace broad phrases such as “compliant” or “tested” with the evidence and result required. “Latest test report” is not a stable requirement; record the standard edition, product linkage and document status. Office Smart Lock Site Survey can inform the door and use fields, but it does not create conformity evidence.
Stage 2 — Confirm scope before mapping evidence
For this runbook, treat AS/NZS 4145.2 as a lock-performance standard for the security properties of locks for external pedestrian doors. It does not answer electronics questions. Because designation and scope must be checked against published material, record the source, edition date and reviewer. A scope statement maps the requirement; it is not product approval.
Before mapping a clause, confirm the published title and scope of the current edition. Record As/NZS 4145.2 scope confirmation as a dated status. If a radio, EMC, electrical-safety, fire-door or egress question appears, open a separate requirement line and request evidence from the applicable route; never borrow the lock-performance report to close it. Use As/nzs 4145.2 for Smart Locks: Scope, Tests and What the Standard Never Proves to pressure-test scope, and As/Nzs 4145.2 When Retrofitting Smart Locks Onto Existing Doors to separate retrofit issues from the lock evidence.
CONFIRM-WITH-LOCAL-AUTHORITY: Verify the designation, current edition, title and scope in the published standard text, and confirm which authority or publisher signs off the applicable requirement.
Stage 3 — Classify every evidence document
Give every attachment one primary document class. More than one file may support the same claim, but the register must show which file is the report, certificate, declaration or marking.
| Document class | What it establishes | Minimum fields to demand | What it does not establish | Tender decision |
|---|---|---|---|---|
| Test report | Someone tested a sample | Report number, issuer, date, standard edition, sample identity and results | Coverage of the offered SKU | Use only with a completed product trace |
| Certificate | A body attests conformity | Issuer, verifiable number, scope, validity and covered product | Products outside the stated scope | Use after the exact-product check |
| Declaration | The manufacturer or importer makes its own legal claim | Declarant, signature, date, standard edition and product | Third-party attestation | Review as declared evidence |
| Marking | A mark or label appears on the product or label | Image, location, date and product linkage | The underlying conformity result | Use as supporting evidence only |
| Marketing image | A promotional representation | Asset source and date | Any technical result | No technical pass |
Record test report sample traceability and certificate scope and validity as separate fields. A test report identifies the sample tested; it does not automatically identify the offered SKU. A certificate needs its issuer, verifiable number, scope, validity and product linkage. A declaration needs the declarant, signature, date and referenced documents. A marking is supporting label evidence. The completed smart lock conformity evidence index states which document controls each conclusion.
CONFIRM-WITH-LOCAL-LEGAL: Have local counsel confirm the legal role, signatory, wording and retention requirements for any declaration included in the tender response.
For page-level review, follow Reading an As/Nzs 4145.2 Test Report Page by Page: A Smart Lock Buyer Walkthrough. For class or grade references, use Decoding As/Nzs 4145.2 Class and Grade Numbers for Door Hardware. Until the checks are complete, show CONFIRM-PER-SUPPLIER in the status field.
Stage 4 — Complete exact SKU evidence traceability
Build one unbroken trace: reported sample → declared test configuration → offered model and variant → signed release record.
| Trace field | Pass condition | Stop condition |
|---|---|---|
| Sample identity | The report identifies the sample unambiguously | The sample cannot be identified |
| Tested configuration | All relevant offered options are reconciled | An unresolved option changes the test basis |
| Offered product | Product identifier and variant match | A family name is the only match |
| Evidence scope | Standard designation and edition align | Scope or edition differs |
| Release record | A reviewer signs the trace | The link or approval field is blank |
Do not infer coverage from a shared family name, visual similarity or a catalogue listing. If the evidence leaves a relevant option unresolved, return the trace rather than marking it PASS. For an installed-door check, Smart Lock Retrofit Site Survey records the site questions that belong outside the test report.
Stage 5 — Check validity and continuing controls
Validity is document-specific. Check the certificate scope and validity against the offered product. Check that a test report identifies the sample and test basis. Check that a declaration is signed and dated. Treat a marking image as a link to the product, not as a substitute for the underlying evidence.
Use this evidence-quality ladder as the minimum progression:
For as nzs 4145 2 smart lock tender evidence, the evidence-strength order runs:
marketing image→self-declared DoC→sample test report→certificate with scope and certificate number→certificate naming the exact SKU/variant on the order→audit/production-control evidence that keeps it valid after the sample passed
The rungs that decide as nzs 4145 2 smart lock tender evidence are the ones issued under as nzs 4145 2; a file for a different scheme does not move the position on this ladder.
Do not treat a self-declared DoC or a sample report as final release. Request production control evidence showing how the supplier checks continued conformity after the sample stage, and identify which records support that claim. Who Pays for As/Nzs 4145.2 Evidence in a Smart Lock OEM Programme helps assign that work without confusing responsibility with acceptance.
Stage 6 — Assemble the controlled tender annex
Index the annex in this order: requirement schedule, evidence index, source files, traceability matrix, exception log and signed release record. Give every source file a unique name containing the project, as-nzs-4145-2, product identifier, document class and revision. Preserve the received file and record any replacement as a new revision.
Make the register title as nzs 4145 2 smart lock tender evidence and add the product identifier, document class, standard edition and status to every row. Keep accepted, rejected and superseded evidence visible rather than silently replacing it. Ask bidders to supply the index with the offer, not an unstructured folder of screenshots.
CONFIRM-WITH-LOCAL-LEGAL: Confirm tender-record retention, confidentiality and any personal-data handling requirements before archiving the evidence set.
Stage 7 — Run the final release gate
Run this gate after every bid revision. The reviewer signs each completed line and records the source file.
- The requirement names the current published title and scope.
- The standard designation and edition are consistent.
- Every attachment has one document class.
- The test-report sample identity is traceable.
- Certificate issuer, number, scope and validity are checked.
- Declaration signatory and date are checked.
- Marking is linked but not used as sole evidence.
- The offered SKU and variant reconcile to the test basis.
- Production control evidence and open exceptions are recorded.
flowchart TD
A[Freeze the tender requirement] --> B[Confirm published title and scope]
B --> C[Classify each supplied document]
C --> D{Document class confirmed}
D -->|Test report| E[Record sample identity]
D -->|Certificate| F[Record scope and validity]
D -->|Declaration| G[Record signatory and date]
D -->|Marking| H[Record label linkage]
E --> I[Trace exact offered SKU]
F --> I
G --> I
H --> I
I --> J[Check production control evidence]
J --> K{Release gate passed}
K -->|No| L[Open corrective action]
L --> C
K -->|Yes| M[Index and sign the annex]
Readers comparing approaches usually start with the smart lock pin security. That is the same question as nzs 4145 2 smart lock tender evidence has to answer here.Any unchecked item is HOLD. A checked item without a source reference is not complete. The Procurement Manager resolves cross-review differences before release.
Exception handling for incomplete submissions
Use these rules to prevent a partial answer from becoming an apparent pass:
- Document class unclear: Set
HOLDand ask the supplier to identify the document type, issuer and purpose. - Scope mismatch: Return the claim to its own requirement line and request evidence for the correct scope.
- SKU mismatch: Keep the file in the index but block it from supporting the offered configuration.
- Validity or production gap: Record the missing item, owner and closure evidence.
- Replacement received: Preserve the original file and link the replacement to the same requirement row.
Each closure needs the same identity, scope, product and approval checks as the original submission. A supplier correction does not bypass the gate.
Handover and release record
The Procurement Manager signs the release only when the requirement schedule, evidence index, source files, traceability matrix and exception log agree. Record approver name, role, decision date, document revisions reviewed and unresolved exceptions. An unresolved exception means the relevant requirement remains HOLD; it does not disappear because the main pack is complete.
Before circulation, ask each bidder to return the completed evidence index and to identify any item still awaiting confirmation. That gives the tender team a controlled record of what was offered, what was checked and what remains open.
The quote request is where the decision turns into a number: request a quote.

