Clause-bank guidance for evaluating as built documentation supplier responses, document ownership, handover evidence, revisions, and unresolved omissions.

Publicado el: ago. 19, 2026

As Built Documentation: How Suppliers Respond

As Built Documentation: How Suppliers Respond

Why supplier response needs its own clause

This clause bank gives a door hardware consultant a ready-to-issue structure for an as built documentation supplier response. It treats the supplier’s reply as a record tied to installed doors, not as a loose attachment to an email. The objective is to let the client, installer and supplier identify what was delivered, what remains unresolved and who owns the next action without reconstructing the exchange from individual messages. What the specification covers is in the smart door locks.

Direct answer. Use the clauses when the supplier must confirm installed products, record dimensions

The broader selection criteria remain useful alongside these clauses. As Built Documentation: A Smart Lock Specifier Guide covers the wider evidence review, while the clauses below concentrate on how a supplier answers a request in a form another party can administer.

ClauseDecision fixedSupplier deliverableEvidence of completion
C-01What the response coversIndexed response scheduleEvery request has a status and signatory
C-02Who holds the recordOwnership and custody responseNamed custodian and controlled repository
C-03Which product was installedProduct identity recordSKU, revision and deviations identified
C-04How it fits the installed doorDoor-set geometry recordInstaller-confirmed dimensions
C-05How the door is arrangedConfiguration recordFunctions, interfaces and decisions traceable
C-06What is incomplete or changedDeviation and omission responseMissing information notice with closure route
C-07What handover includesIndexed handover packageTransfer receipt and complete index
C-08How acceptance is controlledRevision and acceptance recordDated review and controlled revisions
flowchart TD
  A["Issue numbered response request"] --> B["Supplier returns indexed response"]
  B --> C{"Required fields complete?"}
  C -->|No| D["Issue missing information notice"]
  D --> B
  C -->|Yes| E["Specifier records review"]
  E --> F["Issue handover receipt"]

Clause C-01 defines the boundary of the reply

Issue text. The supplier shall return one indexed response against each as-built-documentation request. Each entry shall state its status, identify the installed item or opening, cite the supporting record and name the person responsible for closure.

Supplier response. The as built documentation supplier response shall cross-reference the request identifier, clause identifier, submitted evidence, response date and supplier signatory. An attachment may support an entry, but it does not replace the entry in the schedule.

Acceptance test. Every issued request has one status: complete, qualified, conflicting or missing. A blank field is treated as missing rather than inferred from another document. If a request cannot be answered, the supplier shall issue a missing information notice that identifies the missing field, its effect on the review and the proposed route to closure.

This wording prevents a general assurance such as “documentation attached” from becoming an unverifiable response. It also gives the reviewer a stable basis for comparing replies from different suppliers.

Clause C-02 assigns ownership before files change hands

Issue text. The document ownership clause shall name the originator, the receiving organization, the custodian role, the controlled repository and the person authorised to approve a later revision.

Supplier response. The supplier shall identify where the source files reside during preparation, who compiles them, what file formats will be transferred and which party receives the accepted record. Personal folders and individual mailboxes shall not be identified as the permanent repository.

Acceptance test. The handover receipt names the receiving custodian and the location of the indexed record. It also records any source files that remain with the supplier and explains which copy is authoritative.

The clause separates authorship from custody. The supplier can compile the response, while the appointed custodian maintains the accepted version and its revision history. This avoids the common situation in which the person who compiled the files disappears at handover and the future reader receives a folder with no accountable owner.

Clause C-03 ties each entry to an installed product

Issue text. The response shall identify the exact product and ordered configuration installed at each relevant opening. Where an approved submittal exists, any difference between that submittal and the installed item shall be recorded.

Supplier response. For each entry, the supplier shall provide the manufacturer or brand, model or SKU, ordered finish, supplied configuration and relevant document revision. A manufacturing or serial identifier may be recorded where it exists and can be transferred lawfully. The supplier shall also list each departure from the approved product information.

Acceptance test. The reviewer can match the response to the approved submittal and the door schedule without guessing which member of a product family was supplied. Any discrepancy is routed to the deviation process rather than silently overwritten.

CONFIRM-PER-SUPPLIER: Confirm the exact SKU, ordered configuration and every product-specific statement against the dated product page for the specific SKU before the response is accepted.

A model-family name alone is not enough for installation traceability, particularly where the configuration or finish affects the door set. The date of the supporting product information also matters because the document used for the purchase may differ from the one available when the installation is completed.

Clause C-04 records the installed door set, not only the lock

Issue text. The supplier shall provide the dimensional information needed to verify the lock against the door and frame actually installed. Dimensions shall not be inferred from catalogue material.

Supplier response. The door-set record shall identify the door mark and opening identifier and provide door thickness, backset, bore diameter, bolt-to-bore distance, faceplate and strike references, handing and relevant frame condition. Backset, bore diameter and bolt-to-bore distance are separate dimensions and shall each remain visible in the response. A photograph may show the condition or finish; it does not replace a specified finish reference such as RAL or a colour reference.

Acceptance test. The installer or designated site representative confirms the dimensional fields against the installed door. The reviewer can then distinguish a manufacturing variation from an installation issue without relying on a brochure dimension.

Field-survey evidence is particularly important when the door set differs from the drawing. Office Smart Lock Site Survey and Smart Lock Retrofit Site Survey show why site conditions need their own record rather than being copied into an as-built-document package without verification.

Clause C-05 captures the arrangement that was installed

Issue text. The supplier shall describe the functional arrangement at each opening without including access secrets or personal data.

Supplier response. The configuration record shall identify the lock’s role in the door set, the locking arrangement, any line-supervision or egress-interface arrangement, the battery-backup arrangement where present, and the source of the fail-safe or fail-secure decision. It may identify controller and credential-group references, but shall exclude private codes and other secrets.

Acceptance test. Another reader can reconstruct the intended arrangement and trace each operational decision to its source. Unknown settings, unconfirmed interfaces and assumptions are entered as exceptions rather than completed as facts.

This clause records configuration rather than making a general performance claim. It is particularly useful where doors serve different roles within one access-control arrangement. An unknown value remains visible until the installer or responsible system provider closes it.

Clause C-06 requires omissions and deviations to be visible

Issue text. The supplier shall report every material departure from the approved submittal, the scheduled product, the specified door set or the documented installation instruction.

Supplier response. A missing information notice shall state the affected request and opening, describe the departure or omission, explain its effect on the recorded design, identify the evidence already available and propose the next action. The notice shall not replace the missing record with an assumption.

Acceptance test. No substitution or unresolved condition is left only in an attachment. The reviewer records the disposition as accepted, rejected or held for clarification, together with the reason and the responsible party.

The supplier is not expected to conceal uncertainty to make the handover appear complete. The useful response makes uncertainty traceable. Coordination issues that require a decision from more than one party can then be handled through the process described in As Built Documentation: Coordination Between Architect and Supplier.

Clause C-07 defines the handover evidence package

Issue text. The supplier shall transfer the accepted records as an indexed submittal package with a transfer receipt.

Supplier response. The package index shall list each file, its opening or topic, revision, format and responsible author. Native schedules shall be supplied where they remain editable records, accompanied by a readable rendering when appropriate. Photographs, field sheets, configuration exports and signed inspection records shall be cross-referenced to the index rather than stored as unidentified attachments.

Acceptance test. Every file opens, belongs to one indexed entry and carries the stated revision. The receiving custodian confirms receipt against the index. Missing, duplicate or orphan files are listed on the receipt and do not disappear into the transfer.

Handover evidence should be usable after the project team disperses. The index explains what each record answers, while the transfer receipt establishes who received it. A separate unresolved-items list allows accepted documents and open actions to coexist without making the overall package misleadingly appear closed.

Clause C-08 controls revisions and records acceptance

Issue text. All accepted records shall remain subject to document revision control. A change after handover shall identify the changed entry, the reason for the change, the new revision and the person authorising it.

Supplier response. The supplier shall provide a change log, mark superseded revisions and distinguish an administrative correction from a change to the installed product, door set or configuration. A revised file that replaces an accepted file shall carry the same index reference rather than appearing as a new unrelated record.

Acceptance test. The submittal is not approved until the review is recorded and dated. The supplier’s signatory confirms the factual response; the authorised reviewer records acceptance, qualified acceptance or rejection. These are separate acts and shall not share one signature field.

The reviewer can use As Built Documentation: Reviewer Checklist to confirm that the revision, status and outstanding-action fields have been completed before the record is released.

Comparing supplier responses before acceptance

A supplier response should not be classified merely because a file is attached. The decision depends on whether the reply answers the request, states its limitations and identifies a route to closure. Use the following comparison table to separate documentary completion from unresolved project information.

Response conditionComparison findingDecision nowRequired record
CompleteEvery requested field is answered and traceable to evidenceAccept for reviewSigned entry and evidence reference
QualifiedThe reply answers but identifies a bounded limitationHold the affected itemQualification, owner and closure route
ConflictingTwo supplied records describe different factsReject the conflicting entry pending reconciliationConflict list and decision record
MissingA requested field or record is absentReturn a missing information noticeGap description and proposed action

A qualified response is not the same as a complete response. It may remain in the package, provided the qualification is visible and the affected decision is held. A conflict is different again: the supplier has supplied evidence, but the evidence does not agree. The reviewer should not resolve that discrepancy by selecting whichever record appears later in the index.

The decision owner should follow the scope of the issue. Product identity may be confirmed by the supplier; an installation dimension may require the installer’s verification; a change to the specified door set may require the specifier’s decision; and a change affecting project requirements may need broader consultation. The review record should name that owner rather than relying on a general approval.

Authority-dependent questions remain separate from the supplier

A supplier can provide facts about what was supplied or installed. It cannot determine the local consequence of an escape arrangement, a fire-resisting door assembly, an accessibility requirement or another legal obligation. The response should therefore state the question, cite the applicable source and identify its scope, date and issuer. Any authority decision belongs in a separate project record.

CONFIRM-WITH-LOCAL-BUILDING-CONTROL: Confirm with the local building-control authority which requirements apply to the installed door and record the decision against the opening.

CONFIRM-WITH-FIRE-AUTHORITY: Confirm with the fire authority whether the installed door assembly or its hardware arrangement requires a project-specific decision, and retain that decision separately.

CONFIRM-WITH-ACCESS-CONSULTANT: Confirm with the access consultant how the installed operable parts and approach apply to the project, and retain the reviewed evidence against the relevant door record.

These confirmations prevent a supplier’s factual response from being mistaken for an authority’s approval. They also prevent an approval for one opening or assembly from being copied automatically to another.

Closing the response loop

Acceptance should occur only after the schedule, indexed submittal package and handover receipt agree with one another. The receiving custodian then holds the accepted revision, the dated review record, the unresolved-item list and the document revision control log.

Use this clause bank with the next documentation request: issue the numbered clauses, attach the supplier response schedule and require an indexed return. That gives the supplier a precise response obligation while giving the future reader a record that identifies the installed door, its source evidence, its current revision and the person responsible for any remaining gap.

The next step is to request a quote.

Su carrito
Su experiencia en este sitio mejorará al permitir cookies Política de cookies
Chat on WhatsApp