Smart Lock Glossary: LCL Definition for B2B Buyers
What follows defines lcl definition plainly, with the trade-off behind each option attached. A quotation for a mixed lock order — cartons of keypads for one hotel floor, a wrapped pallet of euro-profile cylinders for the service doors, a handful of loose escutcheons for the site supervisor — usually arrives with a line that carries more weight than the specification table above it. The shipment term reads LCL. The delivery instruction names a station rather than a door. Nobody in the chain has misled you. Everyone has used a word the trade applies correctly and that importers routinely misread.
Direct answer. Condensed to the essential point, lcl definition turns a request into a decision record. lcl definition and the decision record are the two parts of lcl definition most often skipped. A lcl definition is a category reference. lcl definition comes first. Each option states what lcl definition commits a buyer to.
Getting the lcl definition right is not a vocabulary exercise. It decides who builds the box your goods travel in, who opens it again, whose name must appear on which document, and what record you can hold up if a carton of reader modules is missing when that box is opened. Those answers are commercial, and they belong to you before the booking is placed rather than after the vessel has sailed.
This entry puts the term in an arena. Each section sets it against the idea buyers silently substitute for it — a place, a delivery term, a container size, a document, a lane — and names what changes in your file when the two are confused. Three of those bouts will save you an argument at a release counter; one of them will save you from an argument you lose.
CONFIRM-WITH-LOCAL-CUSTOMS-BROKER: the handling, release and duty questions raised below are settled by the rules of the receiving market and by the documents your broker holds, not by this glossary entry.
What the Three Letters Settle First Where the two versions
What it is. The lcl definition in one line: less than container load — cargo that shares a container with other shippers' goods. Your consignment occupies part of the box, not the whole of it, and the rest of the box belongs to people you will never meet and whose paperwork you will never see.
What it actually decides. The abbreviation allocates three pieces of work: consolidation, deconsolidation and the handling of the cargo at the terminal. Who assembles your cartons into a container with somebody else's pallets. Who takes them out again on the far side. Who is responsible for the goods while they sit in that building. If a term answers those three questions, it is doing real work in your contract; if it answers none of them, it is decoration on a freight note.
The confusion that costs money. LCL is a mode, not a place. The single most expensive misreading of the term is to treat it as an address — as though writing the abbreviation into an order caused the goods to arrive somewhere specific and in someone's care. It does not. It says how the container was filled. A second, subtler error follows the first: buyers read a shared container as though it were still sealed to them. It is not sealed to you in the way a container booked to a single shipper would be. Several hands and several consignments sit between your pallet and the box.
The evidence to demand. A booking record that names the consolidation point. A delivery instruction that names the deconsolidation point and the party authorised there. The consignee name as it appears on the carrier's document. A release instruction distinct from both. Everything else in this article is commentary on those four records.
Where it bites. At the loading point, when cartons that were packed to a certain unit of measure are re-palletised to fit a shared floor. At the station on the far side, when the box is broken down and your portion is set aside. At the release counter, when the person presenting paperwork has to be the person the terminal is instructed to hand over to. Those three moments are where the mode does its work, and each of them produces a record you can ask for in advance.
The Bracket, and How to Read It
A glossary entry usually defines a term in isolation. That is precisely how the confusion survives, because nobody explains what the term is not. The arena format does the opposite: it lines up the neighbours and fights each one.
Six opponents, in the order buyers usually meet them.
The reason to work them as a bracket rather than as a list is that import shipping terms are rarely misread one at a time. A file that confuses the mode with a place usually confuses it with a document as well, because both errors come from the same habit: reading a freight abbreviation as a promise about the goods instead of as an allocation of work. Each bout below therefore ends where a buyer's argument with a forwarder or a supplier ends — with a field on an order form that has to be filled by a person rather than by an abbreviation.
Write the working rule down before the table, because the table is only its expansion. Container consolidation is somebody's task; deconsolidation is somebody else's; the cargo in between is somebody's handling responsibility. If your file does not name those three parties, the abbreviation has told you how the box was filled and nothing about who answers for what is inside it.
| Bout | The substitution a buyer makes | What the substitution costs | The correction in one line |
|---|---|---|---|
| One | LCL is read as a place | A delivery instruction with no address and no authorised party | It is a mode; a place has to be named separately |
| Two | LCL is read as a sealed box | Custody assumptions built on a seal you do not own | Several consignments share the container and its handling |
| Three | LCL is read as a delivery term | Cost and risk boundaries left undecided | An Incoterm names a place; the mode names a handling method |
| Four | LCL is read as a capacity or weight statement | Space planned against the wrong measure | Capacity is counted in container units, not in your kilograms |
| Five | LCL is read as proof of title or delivery | A file that looks complete and proves nothing | Documents are separate records with separate jobs |
| Six | LCL is read as a lane decision | A routing argument held without the scheduling facts | The mode describes the box; the lane is a project question |
Read the bouts in order if you are learning the term; work the scoreboard section directly if you have a booking on the desk and an hour.
Bout One: The Mode Against the Place
The station where a container is received, stripped and released has its own name in the trade, and it is not LCL. It is a container freight station — the terminal at which the legal and physical handling of the box happens. That distinction sounds pedantic until a shipment is stuck.
A buyer who believes the mode is a place writes "LCL" into the delivery field of a purchase order and reads the order as complete. The supplier books the goods into a shared container. The vessel moves. On the far side the container goes to a station, is broken down, and the goods are released to whoever the terminal is instructed to release them to. At that moment the buyer discovers that the paperwork named a handling method, not a destination, and never identified the party standing at the counter.
The correction is to split the instruction into three fields that the abbreviation cannot fill:
- Where the box is assembled. The consolidation point, named in the booking rather than assumed from the supplier's city.
- Where the box is opened. The deconsolidation point, with its address and its role stated in the delivery instruction.
- Who is entitled to the cargo there. The consignee as written on the carrier's document, and the release authority that instructs the station to hand over.
The related trap in the same neighbourhood: a station is neither the port nor your warehouse. Goods sitting in that building are not in your possession merely because the container has arrived, and asking that facility to perform storage, re-packing, inspection or onward delivery work that was never in its instruction produces exactly the delay everyone then blames on someone else. The depth on the arrival sequence — what is checked, by whom, and against which paper — is carried by the published Smart Lock Shipment Planning guide, and this entry does not repeat it.
What a place-name buys you is precision about an event. What a mode-name buys you is a list of people who now have work to do on your cargo. Confusing the two is how an importer ends up with an address on the file and nobody accountable for the goods.
Bout Two: Your Carton Inside Somebody Else's Box
Here is the sentence that should survive the meeting: the container is not sealed to you.
A container booked to one shipper and closed at that shipper's loading point carries a straightforward story. Your packing, your seal, your photographs, your chain of custody from the door onward. A shared container is a different story, and the difference is not cosmetic.
Inside that box sit goods from shippers you have no commercial relationship with, handled by people whose instructions you never wrote. The carton that left your supplier's inspection line as a unit of measure becomes part of a floor plan somebody else drew. A pallet of mortise bodies is strapped against somebody's machinery; a stack of keypad cartons is placed where a heavy item can be set on top of it. Nothing about that is improper. It is simply not your decision, and it is not covered by the packing standard you approved.
Two consequences follow directly from the fact base rather than from opinion.
Consolidation is somebody's job, and the mode does not tell you whose. The handling of cargo at the terminal is one of the three things the abbreviation allocates. Ask, in writing, who consolidates, on what instruction, and what protection is applied to cartons that were packed to be handled as cartons.
Deconsolidation is where your unit counts get tested. Your receiving documents were written against cartons and pallets from the loading point. The break-down on the far side is the first time your consignment is separated from other goods again, and it is where a shortage either surfaces or becomes impossible to attribute.
There is a third effect buyers notice only on the second shipment: shared container cargo changes whose decisions your goods obey. At the loading point your supplier controls packing and marking. Once the portion joins a box with other consignments, the stowage plan, the strap pattern and the stacking order belong to the party assembling the container, and any instruction about them travels through a booking rather than through your purchase order. Marking is the practical casualty. A carton labelled for one receiving dock, in the marking scheme agreed for one project, arrives at a break-down point where the label competes with other shippers' labels for the same handler's attention. That is not a reason to change a marking decision after the fact — it is a reason to check the marking and unit-of-measure fields before the booking is placed rather than in a claim afterwards.
The evidence that closes that gap is not a photograph of a seal. It is the chain of custody — the documented, unbroken record of who held the goods. That record is a process rather than a single paper, and it starts before the container is closed. If your file can show packing, loading, terminal receipt, break-down and release as a continuous set of events, a loss is attributable. If it cannot, a loss is a discussion. The published Smart Lock Container Loading Inspection article is where the loading-side records are set out in the detail this entry does not repeat, and Smart Lock Carton Packaging covers the packing decisions that a shared floor plan can undo.
CONFIRM-WITH-LOCAL-LEGAL: who bears responsibility for goods damaged or short at a break-down point is a question of the terms of carriage and local law, per consignment.
Bout Three: The Mode Against the Delivery Term
The most persistent reading error is treating the shipment abbreviation as though it were one of the international trade terms. They are different instruments answering different questions, and a purchase order can need both.
Incoterms allocate cost, risk and delivery obligations between seller and buyer — they mark the point where responsibility changes hands. An Incoterm names a place, and without that named place it decides nothing. LCL does not name a place at all. It describes how the container was filled. Put the two in one field of an order form and you get a document that appears specific and is silent on the only question that mattered.
| Term | What the trade fixes about it | What it leaves untouched | The confusion it invites |
|---|---|---|---|
| FCA — Free Carrier | the seller delivers to a named carrier at the named place, cleared for export | where the buyer's own arrangements begin after that handover | it is read as "free at the factory", which is EXW |
| EXW — Ex Works | the seller makes goods available at its premises | export clearance, which the buyer takes on | buyers assume the seller handles export formalities |
| FOB — Free on Board | delivery on board the vessel at the port of loading | the destination port, customs and inland delivery | it is read as a door promise it never makes |
| CIF — Cost, Insurance and Freight | the seller pays cost, insurance and freight to the destination port | risk, which still passes at origin | buyers assume the risk travels to the destination |
| Delivered at Place | delivery to a named destination, ready for unloading | the mode by which the goods got there | it is read as a freight method rather than a place |
Read the last column twice, because it is the shape of the mistake. A buyer arguing "we agreed CIF, so the risk is the seller's until the port" is arguing about a term that says the opposite; a buyer writing "LCL to destination" believes they have specified an arrival obligation that the abbreviation cannot carry.
Now put the two instruments side by side on a real order. The delivery term says the seller's obligation ends when the goods are on board at the loading port. The shipment mode says the box those goods travelled in also contained three other consignments, and that assembling and separating them is somebody's work at two ends. Each of those statements is true, they answer different questions, and neither one fills the field the other leaves blank.
The practical instruction is short: never let a mode occupy a place-field, and never let a delivery term stand in for a handling instruction. If your purchase order has one shipping line, it has one line too few. The Smart Lock Purchase Order Checklist exists for exactly that repair, and the term-by-term depth on the delivery side sits in the published Smart Lock Sea Freight Shipping article.
CONFIRM-WITH-LOCAL-CUSTOMS-BROKER: which term your documents should carry, and how the named place is recognised on the import side, depends on the consignment and the receiving authority.
Bout Four: The Mode Against the Counted Container
Capacity in this trade is counted in twenty-foot equivalent units. That measure is a volume statement — the unit container capacity is priced and planned in — and it is not a weight statement. A buyer who reads the shared-container abbreviation as though it were a capacity claim does two kinds of damage in the same order.
First, space is planned against the wrong measure. Your consignment occupies a portion of a box that somebody else designed the floor plan for. The quantity you are actually competing for is not kilograms; it is floor area and stacking behaviour, and it is decided by the consolidation point rather than by your packing list.
Second, the packing decisions quietly move upstream. When goods share a box, the way cartons are grouped onto pallets and the way those pallets are dimensioned determines what the planner can do with your portion. That is why the pallet conversation belongs in the pre-production stage rather than in a freight argument after the containers are allocated: see Smart Lock Pallet Packaging and Smart Lock Export Packaging, where the packaging build is treated as part of the order rather than as an afterthought.
One further distinction worth keeping, because it appears in the same quotations: the equivalent-unit measure describes capacity; the station describes handling; the shipment mode describes who shares the box. None of the three tells you what your goods weigh, and none of them is a substitute for a stated unit of measure on your own documents. When a shortage is argued later, the numbers that survive are the ones you wrote down before the container was closed.
The arena verdict here is narrow but useful: the mode wins against the capacity reading, because capacity is a planning input for whoever fills the box, while the mode is a set of obligations that land on named people. Planning inputs can be re-done. Obligations cannot.
Bout Five: The Mode Against the Documents
A shared-container booking is not a document, and it is not title. Three records live next to it in the file, and each does a job the abbreviation cannot do.
The carrier's document for goods shipped on a vessel settles title, and often the ability to sell the cargo while it is still moving. It is not proof that the goods you ordered were delivered. Those are different findings, and a file containing the first and claiming the second is the kind of file that loses a dispute.
The advance shipping notice is the electronic notice sent before arrival with the contents and the documents, and it decides whether the terminal can receive and release the cargo. It is not the carrier's document and it transfers no title. A buyer whose receiving team treats the incoming notice as the authority for release has handed the terminal a document that says the goods are expected and nothing that says they may be collected. The pre-arrival checks that catch that error are laid out in What Should I Check Before Smart Lock Shipment?, which is where the document-by-document treatment sits.
The consignee is the party named to receive the goods — the party the carrier will deliver to and the party the duties attach to. That name is not automatically yours. A forwarder may be named on the document instead of the buyer, and when it is, the paperwork changes along with it. Because terminal charges for a container sitting beyond its free time land on whoever was named as consignee, a name you did not choose can become a bill you did not expect. Nothing in the shipment mode protects you from that; only checking the field does.
Where the confusion becomes expensive is in payment. A bank honouring a letter of credit examines the documents, not the goods; a clean-looking invoice is not the test. Payment against presentation of the shipping documents ties the timing of money to title, and it is neither cash on delivery nor an open account. A buyer arguing that the mode of carriage proves the goods arrived correctly is arguing in the wrong forum: the documents say what the documents say, and the goods say what your receiving records say.
The correction is a document map on the order: which record establishes title, which establishes expected contents, which authorises release, which establishes delivery to your door, and who holds each one at each stage. The Smart Lock RFQ Guide for International Buyers is where that map gets written into the request rather than reconstructed after the order.
Bout Six: The Shared Lane Against the Alternatives
The last opponent is the one buyers argue about in meetings. Having settled the mode, someone asks whether the whole programme should have gone another way.
Treat that as two questions, not one. The first is what the mode did to your handling and your records, which this entry has now answered: it moved consolidation, deconsolidation and terminal custody onto other parties, and it made the chain-of-custody record the thing you rely on. The second is whether a different routing would have suited the programme, which is a scheduling and phasing question — how the sites were being handed over, which rooms were needed first, whether the pilot floor was being fitted before the rest — and belongs to the published Smart Lock Air Freight Shipping and Smart Lock Sea Freight Shipping pieces rather than to a glossary line. Whether a consignment earns its way onto a faster lane is your programme's calculation; the abbreviation is not an argument in it.
One genuinely trade-relevant point does belong here. A shared-container route is the natural companion of a partial or phased order: a pilot building, a first floor of hotel rooms, a distributor's opening assortment before the SKU list has settled. When quantities are small and the assortment is still moving, the option of not committing a whole box is worth something. When the assortment is stable and the volumes are real, the same route means your goods spend their journey being planned around other people's cargo. That is a decision you make once per project phase, not once per carton.
If the phasing question is live, the honest companion reading is Smart Lock Total Cost of Ownership, where the cost of handling, holding and re-ordering is treated as a programme figure rather than as a freight line.
How the Box Is Built and Broken
The containment structure is the part buyers picture wrongly, so here it is as a diagram rather than as a paragraph. Each relationship below is a responsibility somebody holds, and the labels are the fields you ask about.
classDiagram
class Booking["Booking record"]
note for Booking "names the consolidation point · carries the shipment mode"
class PackingList["Packing list"]
note for PackingList "your counts and unit of measure · written before the floor plan exists"
class Carton["Carton group"]
note for Carton "packed as a unit · re-palletised at the loading point"
class SharedContainer["Shared container"]
note for SharedContainer "other shippers inside · seal not yours alone"
class OriginStation["Consolidation point"]
note for OriginStation "assembles several consignments into one box"
class DestinationStation["Deconsolidation point"]
note for DestinationStation "receives · strips · releases"
class CustodyRecord["Chain of custody"]
note for CustodyRecord "a process rather than a paper · starts before the box is closed"
class ReleaseInstruction["Release instruction"]
note for ReleaseInstruction "names the party entitled at the counter"
OriginStation o-- SharedContainer : builds
DestinationStation o-- SharedContainer : breaks down
SharedContainer *-- Carton : carries
Booking --> OriginStation : identifies
PackingList --> Carton : counts
CustodyRecord --> Carton : traces
ReleaseInstruction --> DestinationStation : authorises
Read the diagram the way a claim is read. Every arrow is a place where an event either gets recorded or does not. The booking and the packing list are yours to inspect before goods move; the container is a shared asset you influence only through instructions; the two stations are buildings where your cargo is handled by people whose work lists you never saw.
The reason the same diagram appears in a glossary entry at all is that the term's meaning is mostly structural. Saying "cargo sharing a container with other shippers' goods" is two sentences. Knowing what that arrangement does to custody, counting and release is the rest of the article.
Where the Mode Bites Inside a Lock Programme
Abstract freight talk stops being abstract at the moment a project needs a door fitted. Walk the mode through the parts of a lock order that have real geometry.
At the loading point. A pre-shipment inspection is judged against what it inspects: the cartons, the marking, the quantities and the packing as they exist at that moment. Once goods are re-palletised for a shared floor, part of what the inspection report describes is no longer the physical arrangement travelling. The report is still evidence of the goods; it is not evidence of how they were stowed. Smart Lock Pre-Shipment Inspection China sets out what that inspection actually covers.
In the carton. Electronics are the reason this matters for our category rather than for freight in general. Card readers, keypads, fingerprint modules and face-recognition heads are boards, ribbon cables and plastic optics; the handling requirement and the product requirement are different documents, and a shared floor plan is a handling event. Static discharge is the classic example of that split: the protection a board needs in a workshop and the protection the packing has to survive in transit are specified in separate places, and neither is settled by an abbreviation on a freight note. Where the packing standard was agreed as part of an OEM or private-label build, that standard is also worth re-reading before a shared route is chosen — see Smart Lock OEM Packaging Customization.
At the break-down. This is where shortages either become findings or disappear. The discipline that makes them findings is a serial-level record of where a unit sits in the chain — track and trace — and its quality is only as good as the discipline of entering each event. A programme that records each lock at packing and each pallet at loading has a decent chance at the far side. A programme that has a carton count and a hope does not.
At the release counter. Everything in bout five lands here. The consignee name, the release instruction and the party physically presenting themselves either match or they do not, and a mismatch costs time in a building where the installation crew is charging by the day.
In the exception. A container staying beyond the terminal's free time produces a charge, and it lands on whoever was named as consignee. When clearance slips because a document is missing, the delay is not neutral: it is a cost that attaches to a name on paperwork. Notice that this is a per-name consequence, not a per-goods consequence, which is another reason the field is worth reading before booking rather than after.
On site. A punch list does not care how the container was filled, but it will discover the answer if a variant is missing, a finish is wrong or a batch arrived damaged. Site acceptance criteria written before the order are what turn a receiving surprise into a bounded claim instead of a project-wide argument.
In the spares stream. The mode reappears in the least dramatic part of a programme and causes the most confusion there. A replacement batch of cylinders, a set of keypads in a second finish, a handful of readers for a building already handed over — small follow-up consignments are the classic shared-container shipment, and they arrive into a site that no longer has the receiving discipline of a first delivery. Nobody is waiting at the dock, the local technician expects the parts to behave like the ones installed before, and the record of who held the goods thins out precisely when it is most needed. The handling questions are identical to the ones in the main order, which is why the spare-parts request is worth writing with the same four fields as the pilot consignment; Smart Lock Spare Parts Ordering covers that ordering flow, and the party-level questions behind a follow-up consignment sit in How to Verify a Smart Lock Manufacturer Before Placing an Order.
The Scoreboard
The bouts, with what each distinction changes in your documents. This is the section to bring to a meeting.
| Bout | The distinction that wins | The field in your file that changes | If it is left blank |
|---|---|---|---|
| Mode against place | the abbreviation never names a destination | consolidation point and deconsolidation point, addressed | cargo arrives somewhere and stops moving |
| Mode against sealed box | the container is shared, so custody is a record | chain-of-custody events per handling stage | a shortage cannot be attributed |
| Mode against delivery term | a mode is not an obligation boundary | Incoterm with its named place, stated separately | cost and risk left to be argued later |
| Mode against counted capacity | capacity is volume; your counts are yours | unit of measure as stated on the packing list | counts disputed against a floor plan |
| Mode against documents | documents each carry one job | document map naming title, contents, release, delivery | a complete-looking file proves nothing |
| Mode against lane | routing is a programme calculation | phasing decision per project stage | freight arguments replacing scheduling ones |
A useful test for whether the entry has done its job: read the third column as a list of fields on your current purchase order. If any of them is missing, the gap is the term you should be asking about, and it is not a gap the shipment abbreviation can fill for you.
The Evidence File, in the Order the Transaction Produces It
The definition is only half the entry; the other half is what you demand. These are the freight booking records a claim actually rests on, requested before the goods move rather than reconstructed after an exception.
| Record | Produced by | What it settles | What you ask if it is missing |
|---|---|---|---|
| Booking confirmation | carrier or forwarder | that the shipment mode and the consolidation point are fixed on paper | the named consolidation point, in the booking, not in an email |
| Packing list with unit of measure | supplier | your counts, as stated before the shared floor plan existed | the counts restated in the same unit every later document will use |
| Loading record | the party that closes the box | how your portion was placed among other consignments | who consolidated, on what instruction, with what protection |
| Carrier document | carrier | title, and the consignee name as the transport sees it | the consignee exactly as spelled on the release-side paperwork |
| Advance notice before arrival | shipper or forwarder | what the terminal should expect, and whether it can receive | the contents list and the document set as transmitted |
| Chain-of-custody entries | each handling party | whether a loss or a break is attributable to a stage | the missing event, named and dated |
| Release instruction | the party with authority | who may take the goods at the far end | the authority behind the name standing at the counter |
| Receiving record | you | what actually reached your control | the variance against the packing list, recorded same day |
Two features of that list are worth defending in a negotiation. First, every row is a document that exists already in some system; asking for it is not a favour, it is retrieving a record somebody produced to do their own job. Second, the file's value is continuity rather than volume. Ten documents with a hole between two of them are weaker than four documents that hand over cleanly.
Put the list where procurement will meet it, not where logistics will ignore it. The request belongs in the quotation stage, alongside configuration and marking questions, which is what Smart Lock RFQ Checklist for China Suppliers and the Smart Lock Importer Guide are structured to carry.
Three Questions This Term Does Not Answer
A glossary entry earns trust by naming its own edges. Three neighbours of the shared-container question look like freight questions and are not.
How the goods are classified. The harmonised tariff heading is the classification customs applies, and it drives duty and any import restriction. The same physical lock can classify differently depending on material, power source and function — a keypad unit and a mechanical cylinder are not automatically the same answer, and a reader shipped with its strike plate is a per-product question. Nothing about how a container was filled changes a classification. Ask your broker, on the facts of the specific product, and record the reasoning rather than only the number.
CONFIRM-WITH-CUSTOMS-BROKER: classification, origin and any marking requirement are determinations the customs authority makes on the facts of your specific goods, not answers a supplier or a glossary can supply.
Where the goods originate. Country of origin is a substantive determination with evidence behind it, not an assertion in a paragraph of a datasheet. For some buyers it decides the whole bid. It travels with the goods through any container, shared or otherwise, and it is settled by the applicable rules rather than by the shipping abbreviation.
Who bears the consumption tax. A value-added or similar tax is charged and collected at the point of sale in many markets; who bears it on an import, and whether it is recoverable, is a local answer. Whether a registration number held by the buying entity in its own country changes the import position is not something a freight term addresses.
CONFIRM-WITH-LOCAL-LEGAL: tax treatment on import, and any duty-deferral arrangement such as holding goods under customs control, are determined by the receiving jurisdiction on the facts of your entry.
There is a fourth question that never belongs to a term at all: what the product is. A change to an approved configuration is still a change, even when it improves the product, and a product change notice is the record that decides whether what arrived is what you approved. Shared containers do not change specifications. Suppliers do.
The Booking Line Worth Writing
If only one paragraph of this entry survives the meeting, make it this one. Four fields, in this order, on the order document rather than in the email thread:
- The handling method, stated as cargo sharing a container, with the consolidation point named and addressed in the booking.
- The obligation boundary, stated as a trade term with its named place written next to it, because a term without a place decides nothing.
- The far-side handover, stated as a deconsolidation point, a consignee name matching the carrier document, and a release authority that can act there.
- The evidence set, listed before goods move: loading record, custody events, arrival notice contents, receiving variance procedure, and who writes each one.
A buyer who can fill those four lines has a definition that works commercially, which was always the point. The definition in the plainest words is short — cargo that shares a container with other shippers' goods — and everything else in this entry is what that sharing takes away from you and what you ask for in return.
The routes, the loading-point practice and the document set our own shipping team works to are on the logistics and shipping page; sample and pilot consignments, which is where a shared-container booking most often first appears in a programme, start at order samples. Where the order is still being assembled — assortment, finishes, spares for the first phase — the request-a-quote route is where the packing and booking fields get written before anything is committed, and the standing questions are collected in the buyer resources shelf.

