EN 1935 Versus EN 179: Which One Applies to Your Smart Lock Door
This data memo resolves the en 1935 versus en 179 applicability decision for procurement teams qualifying a complete door package rather than an isolated component. The short answer is neither, either, or both—depending on the component being evaluated. EN 1935 is a single-axis hinge standard, while EN 179 is an emergency escape device standard. A smart lock can share a door with hardware associated with either family without becoming part of either test scope. The en-1935 token used in the procurement file is therefore a routing label for the hinge question, not a statement that hinge requirements govern the lock.
Direct answer. The short answer is that en 1935 versus en 179 applicability is not one decision. It is a sequence. This article takes en 1935 versus en 179 applicability from en 1935 versus en 179 applicability through en-1935 to the record you keep. an en 1935 versus en 179 applicability is the conformity record. One en 1935 versus en 179 applicability claim sits with the manufacturer. Another needs an accredited laboratory. en 1935 versus en 179 applicability settles which is which.
en 1935 versus en 179 applicability is used here in the sense given under en 1935 versus en 179 applicability. It is a working definition of en 1935 versus en 179 applicability that carries no regulatory weight. The buyer still has to check it against the dated product page.
- What the seller can produce — supplier declarations and drawings for en 1935 versus en 179 applicability
- What only an issuer can verify — third-party certificates covering the exact scope of en-1935
- What to request — the document set that matches the SKU behind en 1935 versus en 179 applicability
- en 1935 versus en 179 applicability runs this sequence, and en 1935 is the record it produces.
To: Procurement Manager and door-package qualification teamDecision requested: Allocate standards and evidence requests to the correct door components before supplier approvalControlled scope: Hinges, emergency escape devices, electromechanical locking, and related door interfacesReference rule: Use the current published edition and route clause-level decisions to the standard text
Procurement question and component allocation
A standard describes what the standard tests. It never says that a particular site or door is certified. Procurement therefore needs a component schedule before it needs a standards decision. The schedule should identify the hinge, escape device, smart-lock body, cylinder, door closer, hold-open device, and fire or smoke door assembly separately.
| Qualification question | EN 1935 route | EN 179 route |
|---|---|---|
| Which component is under review? | Single-axis hinge | Emergency escape device |
| What is the normal scope? | Building hardware for single-axis hinges | Emergency escape devices operated by lever handle or push bar |
| What does the designation leave unanswered? | Locking, latch operation, cylinders, radio, EMC, and escape-device operation | Locking performance, cylinders, radio, EMC, and hinge performance |
| How does it relate to the smart lock? | The hinge may share the door, but the lock remains outside this scope | The escape device may share the door, but the lock remains outside this scope |
| What evidence unit should be requested? | The relevant hinge and its test configuration | The relevant escape device and its test configuration |
| What decision can follow? | Include EN 1935 on the hinge line only | Include EN 179 on the escape-device line only |
This separation prevents a common category error: treating hardware that shares a door leaf with the smart lock as part of the smart lock’s evidence package. The same discipline applies to the door hardware specification. A combined schedule can contain EN 1935, EN 179, and a locking-family designation without implying that one report covers the entire assembly. The catalogue side of this is the smart door locks.
CONFIRM-WITH-LOCAL-STANDARD-OWNER: Verify the current published title, scope, national adoption, and amendments for both designations with the relevant local standard owner or qualified reviewer before inserting either into a project specification.
EN 1935: the hinge question in the door package
The EN 1935 hinge standard belongs on the file when the procurement scope includes a single-axis hinge. Single-axis hinge applicability is determined by the hinge itself, not by the presence of a smart lock, an electronic credential reader, or an access-control policy. The correct data request therefore asks the supplier or door-hardware contractor to identify the hinge designation, product reference, and evidence supplied for that component.
The current edition of EN 1935 must be named before clause-level requirements are quoted. Ask for the published title and scope, then route detailed dimensional, performance, or marking requirements to that text. Do not transfer requirements from a latch, lock, cylinder, escape-device, radio, or electrical-safety file into the hinge line.
A hinge test report should be matched to the hinge construction and configuration offered for the project. If the evidence names a sample but cannot be connected to the offered hinge, record it as sample evidence rather than complete component coverage. This is especially important when several hinge types appear in one package, because one hinge reference cannot represent all of them.
EN 1935 for Smart Locks: Scope, Tests and What the Standard Never Proves explains the scope boundary, while Reading an EN 1935 Test Report Page by Page: A Smart Lock Buyer Walkthrough provides the practical method for checking what was tested. Use both at the component level rather than as substitutes for the current standard text.
EN 179: the escape-device question in the door package
The EN 179 emergency escape device designation belongs on the file when the package includes an escape device of the type covered by that designation. The procurement task is to identify the operating arrangement and confirm its published scope. A lever-operated escape device should not be described through panic-bar requirements, and the two exit-device families should not be merged in the evidence schedule.
EN 179 addresses emergency escape devices operated by lever handle or push bar. By contrast, EN 1125 addresses emergency escape devices operated by a horizontally actuated panic bar. If the door package contains the latter, request the applicable EN 1125 route. Record the actual device type before asking a supplier to nominate evidence.
The current edition of EN 179 and its published scope must be attached to the request. Its evidence should describe the escape device submitted for evaluation, while the smart-lock evidence should describe the lock offered for the project. A lever-operated escape device and a smart lock can interact in the door schedule, but neither designation converts the other into part of its test scope.
Avoid asking an escape-device report to establish lock durability, cylinder resistance, radio behaviour, electrical safety, or hinge performance. Those are separate evidence questions. If a project team is uncertain which exit-device family is present, hold that line open until the physical hardware has been identified and the published scope has been checked.
CONFIRM-WITH-LOCAL-ESCAPE-ROUTE-REVIEWER: Confirm the exit-device family, current published scope, and any project-specific escape-route requirements with the responsible local reviewer before release.
The smart-lock line needs a locking-family question
For the lock itself, neither EN 1935 nor EN 179 is the closest functional family. EN 14846 is the closer fit for the mechanical-electrical locking function of a battery-driven smart lock. Other door hardware may still trigger separate standards questions, but those references belong to their own component lines.
| Smart-lock component or function | Standards family to investigate | Procurement question |
|---|---|---|
| Electromechanically operated lock and striking plate | EN 14846 | Which mechanical-electrical locking function and test configuration were evaluated? |
| Mechanically operated lock, latch, or locking plate | EN 12209 | Is the project including a separate mechanically operated locking component? |
| Cylinder | EN 1303 | Which cylinder was included, and what is its evidence scope? |
| Mechatronic cylinder | EN 15684 | Check the published title and scope against the proposed cylinder operation. |
| Multi-point locking system | EN 15685 | Check the published title and scope; do not apply it to a single-point lock without support. |
This table is a routing aid rather than a selection certificate. A smart lock may contain several component types, and the package may also use a standard physical lock, a cylinder, and an electronic controller. The procurement record should identify what each evidence document actually covers.
The key decision is simple: EN 1935 can qualify a hinge line, EN 179 can qualify an escape-device line, and EN 14846 can qualify an electromechanical locking-function line. None of them should be used to imply that the entire smart lock has passed every relevant family of tests.
Applicability matrix for common door configurations
| Door configuration | EN 1935 allocation | EN 179 allocation | Additional evidence lane | Procurement disposition |
|---|---|---|---|---|
| Smart lock with one single-axis hinge | Hinge line only | Not applicable to the hinge | Smart-lock locking function | Approve each component against its own evidence |
| Smart lock with a lever-operated escape device | Not applicable to the escape device | Escape-device line only | Smart-lock and hinge records | Keep the escape device separate from electronic locking |
| Smart lock with a horizontally actuated panic bar | Not applicable to the panic bar | EN 1125 route instead | Smart-lock and hinge records | Correct the exit-device citation before review |
| Smart lock on a fire or smoke door assembly | Hinge line only if included in the assembly scope | Escape-device line only if included | Assembly test evidence and controlled-opening review | Keep hardware claims subordinate to assembly evidence |
| Smart lock with an electrically controlled hold-open device | Not applicable to the hold-open device | Not applicable to the hold-open device | EN 14637 route where the published scope applies | Review the complete opening-control arrangement |
| Retrofit door with mixed legacy hardware | Identify every installed hinge | Identify every escape device | Existing-condition and smart-lock evidence | Survey before transferring any supplier statement |
The table answers the title question at package level. “Which one applies to your smart lock door?” becomes “Which one applies to each named component on this door?” Once the component schedule is populated, standards references can be allocated without creating a misleading blanket claim.
A blank entry is preferable to an assumed entry. If the hinge type is unknown, mark the EN 1935 line as unresolved. If the escape hardware has not been identified, mark the EN 179 line as unresolved. Procurement can then issue a precise question rather than accept a convenient but irrelevant certification statement.
Component-first qualification sequence
flowchart TD
A[Door package qualification] --> B{Identify the component}
B -->|Single axis hinge| C[EN 1935]
B -->|Escape device| D[EN 179]
B -->|Panic bar| E[EN 1125]
B -->|Electromechanical lock| F[EN 14846]
B -->|Fire door assembly| G[EN 1634-1]
B -->|Electric hold open| H[EN 14637]
C --> I[Collect component evidence]
D --> I
E --> I
F --> I
G --> I
H --> I
I --> J[Match scope and variant]
J --> K[Record qualification decision]
For en 1935 versus en 179 applicability, the component-first sequence is the control that prevents scope leakage. Start with the physical item and its function, identify the candidate standards family, obtain evidence for that component, and then compare the evidence scope with the offered item. Finish by recording the decision on the component line rather than compressing every result into one project-wide statement.
The sequence also handles mixed doors. A retrofit can contain a newer smart lock, an older hinge, a mechanically operated latch, and an escape device selected under a different schedule. Each item keeps its own designation, evidence record, and unresolved-question flag. No supplier needs to create a single unsupported “EN 1935 and EN 179 smart lock” claim to complete the package.
Evidence anatomy for the component file
The test report and certificate must be treated as separate documents. A request for “EN 1935 and EN 179 certification” gives a supplier no way to identify which document is expected. Ask for named evidence, tied to a component, model, sample, or variant as appropriate.
| Evidence item | What it actually represents | Minimum traceability for this decision |
|---|---|---|
| marketing image | A presentation of a claim or marking | Useful for identification only; insufficient as the procurement basis |
| self-declared DoC | The manufacturer or importer’s own legal claim | Named issuer, applicable product, signed and dated document |
| test report on a sample | Evidence that a sample was tested | Test body, report number, sample description, tested configuration, and date |
| third-party certificate with scope and number | A body’s attestation with a defined scope | Issuing body, certificate number, scope, validity where stated, and covered references |
| certificate for the exact SKU/variant being purchased | Evidence aligned with the item being purchased | Exact product, model, variant, and component coverage |
| production-control records that hold the approval open after the sample passed | Controls that help connect assessed requirements with production | Scope, production location or control process, and applicability to the ordered item |
A separate conformity-assessment certificate should identify its scope and validity. A declaration of conformity is the manufacturer or importer’s legal claim. A marking such as CE, UKCA, RCM, KC, or G-Mark is printed on a product or label and must not be treated as a test report or certificate by itself.
The evidence-quality sequence moves from a marketing image to a self-declared DoC, then to a test report on a sample, a third-party certificate with scope and number, a certificate covering the exact SKU or variant, and audit or production-control evidence. Commercial failure often occurs when procurement stops at the second or third stage and only discovers the missing production linkage after installation. For en 1935 versus en 179 applicability, the position on this ladder is what the purchase decision turns on.
CONFIRM-PER-SUPPLIER: Request a named evidence index that identifies the document type, issuer, scope, product or component coverage, report or certificate number where applicable, issue date, and any validity period.
RFQ schedule that keeps the standards separate
The RFQ should request component-specific evidence instead of a single combined statement. The Hinge Nobody Specified: Writing EN 1935 Into a Smart Lock RFQ offers a detailed hinge clause, which can be adapted without changing its fundamental scope.
| RFQ line | Buyer instruction | Expected response | Qualification action |
|---|---|---|---|
| Component schedule | List every hinge, escape device, lock, cylinder, closer, and hold-open device separately | Manufacturer reference and component function | Allocate candidate designations |
| Standards edition | State the current edition and published title used for each component | Edition, title, scope, and document location | Lock the specification reference |
| Test evidence | Identify reports issued for the offered configuration | Report number, sample description, tested item, and date | Compare scope with the purchase |
| Certificate | Request any third-party conformity-assessment certificate relied upon | Issuing body, number, scope, validity, and covered references | Match every named component |
| Declaration of conformity | Request the applicable manufacturer or importer declaration | Signed, dated document with clear product identification | Assign it to its document category |
| Marking | Request evidence of the marking shown on the ordered item | Product label, packaging, or dated product image | Verify separately from test evidence |
| Production linkage | Ask how the assessed sample relates to production | Production-control or audit evidence, where relied upon | Identify the remaining evidence gap |
| Change control | Ask how design or production changes affect supplied documents | Supplier notification or control process | Define the re-review trigger |
The expected response should permit the buyer to trace each claim to a document. “EN 1935 compliant” is not a useful line when several hinges are offered. “EN 179 compliant” is not useful when the package includes more than one exit-device family. The buyer needs the item, document, and scope stated together.
This RFQ approach supports smart lock procurement evidence without allowing a strong certificate for one component to mask missing evidence for another. It also lets procurement decide whether an unresolved item needs clarification, additional testing, a different product, or removal from the approved schedule.
CONFIRM-WITH-LOCAL-CONFORMITY-OWNER: Confirm which declarations, markings, certificates, and production-control records the local conformity-assessment route requires for the specific product and market before issuing the RFQ.
Site data for retrofit and mixed-hardware doors
A standards decision cannot be completed from a smart-lock product photograph. The door itself must be inventoried before the evidence request is issued. Office Smart Lock Site Survey provides a structured way to capture the opening and its installed hardware; Smart Lock Retrofit Site Survey addresses the additional condition questions raised when existing doors are being changed.
For each opening, record the leaf and frame identifiers, hinge manufacturer and reference, hinge axis arrangement, existing latch or lock, escape-device type, closer or hold-open arrangement, and the proposed smart-lock reference. If the hardware will remain, photograph and document its condition. If it will be replaced, preserve the before-and-after relationship so old evidence is not mistakenly carried into the new package.
EN 1935 When Retrofitting Smart Locks Onto Existing Doors explains why retrofit conditions alter the evidence comparison. An existing hinge may have no project-specific documentation, while a newly supplied escape device may carry evidence for a different variant. The remedy is a component-specific gap list, not a general statement about the retrofit package.
A site survey also separates an unresolved question from a negative finding. “Hinge reference not recorded” is actionable. “Hinge does not meet EN 1935” is a conclusion that requires the applicable standard and supporting evidence. Record only what the survey establishes and route the qualification question onward.
CONFIRM-WITH-LOCAL-DOOR-ASSEMBLY-REVIEWER: Confirm the scope of the site survey, the required condition records, and the responsibilities of the door assembler, access-control supplier, and building owner for the project.
Fire, smoke, and controlled-opening interfaces
A smart lock installed on a fire or smoke door cannot inherit assembly-level evidence from a component certificate. EN 1634-1 tests door and shutter assemblies, with hardware evaluated as part of the assembly. The procurement record should therefore distinguish a component document from the evidence for the complete tested door assembly.
EN 14637 covers electrically controlled hold-open systems for fire or smoke door assemblies. Its own scope expressly places battery-only systems outside that scope. EN 1154 concerns controlled door closing devices powered by the user, while EN 1155 concerns electrically powered hold-open devices for swing doors. Each item therefore needs its own scope check.
The escape-device route remains separate. EN 179 may be relevant to the escape device, while EN 1125 remains relevant to a horizontally actuated panic bar. The fire-door, hold-open, escape-device, and smart-lock records should appear as linked but distinct lines in the door schedule.
CONFIRM-WITH-LOCAL-FIRE-ASSEMBLY-OWNER: Confirm the assembly scope, applicable door records, hardware configuration, and review authority for any fire or smoke door before treating component evidence as sufficient for the complete opening.
Failure patterns in the evidence package
| Failure pattern | What procurement sees | Why it fails | Corrective request |
|---|---|---|---|
| Lock cited as EN 1935 hardware | A hinge designation attached to the smart-lock line | Component families have been merged | Split the hinge and lock records |
| EN 179 report used for the lock | Escape-device evidence presented as lock evidence | The tested function is different | Request lock-function evidence separately |
| Panic bar indexed as EN 179 | The wrong exit-device family is recorded | The operating arrangement has not been separated | Identify the device and check EN 1125 |
| Marking image treated as proof | A product label or promotional image | The image does not identify the underlying document scope | Request the named report, certificate, or declaration |
| Sample report matched loosely | A report for a similar hinge or device | Configuration and variant coverage are unclear | Reconcile the sample description line by line |
| Wrong certificate version | A document number does not match the current project reference | Edition or issue control is incomplete | Verify the current edition and document status |
| Certificate scope excludes the item | A valid certificate exists for another product or family | The certificate does not cover the purchase | Request evidence for the exact component or variant |
These are scope failures, not merely paperwork failures. A document can be genuine and still be unusable because it covers the wrong sample, component, variant, or door arrangement. The qualification record should state the exact mismatch so that the supplier can respond with a defined document rather than repeat a general compliance claim.
The most effective corrective request is narrow: identify the missing relationship between the tested item and the offered item. That request can be fulfilled with a revised report, a scoped certificate, production-control evidence, a different component, or a clarification that another standards family was applicable.
Final qualification record
Create one row per component and require a disposition before approving the door package. The sign-off should explain which standard was checked, which evidence was used, and what remains unresolved.
| Record field | Required entry | Decision value |
|---|---|---|
| Component identity | Manufacturer reference, model, variant, and opening | Prevents evidence from being transferred to another item |
| Function | Hinge, escape device, lock function, cylinder, closer, hold-open, or assembly | Prevents scope mixing |
| Candidate designation | Current edition, published title, and confirmed scope | Establishes the relevant standards family |
| Evidence document | Document type, number, issuer, date, and covered item | Establishes what evidence exists |
| Marking | Where and how the marking appears on the ordered item | Keeps marking separate from conformity evidence |
| Scope match | Exact, partial, unresolved, or outside scope | Makes the qualification outcome visible |
| Gap owner | Supplier, door assembler, access-control contractor, or project reviewer | Assigns the next action |
| Release status | Accept component, hold component, replace component, or route to authority review | Prevents an unresolved line from disappearing |
For the smart-lock line specifically, record that EN 1935 and EN 179 were evaluated only as adjacent-component questions. On the hinge line, record EN 1935 only when a single-axis hinge is present and the evidence matches that hinge. On the escape-device line, record EN 179 only when the device falls within its published scope; route a horizontally actuated panic bar to EN 1125.
If the component is absent, mark the line not applicable rather than leaving it blank. If the current scope cannot be confirmed, keep the line unresolved. If the evidence covers a sample but not the offered variant, record the exact gap. These dispositions give procurement a more reliable basis than a single certification label.
Readers comparing approaches usually start with how to choose between smart lock technologies. That is the same question en 1935 versus en 179 applicability has to answer here.The next procurement action is to send each shortlisted smart lock supplier a component schedule and evidence index before requesting final commercial approval. Ask for the offered hinge, escape device, and lock references first; then request the matching reports, certificates, declarations, markings, and production-control records. This sequence keeps hinge, escape, fire-door, lock-function, radio, and electrical questions in their proper lanes and makes the final approval decision traceable to the complete door package.
The next step is to request a quote.

