En 1935 versus en 179 applicability: compare EN 1935 and EN 179, identify their distinct scopes, and build a procurement evidence request for the complete.

Δημοσιεύτηκε στις: Απρ 08, 2025

EN 1935 Versus EN 179: Which One Applies to Your Smart Lock Door

EN 1935 Versus EN 179: Which One Applies to Your Smart Lock Door

This data memo resolves the en 1935 versus en 179 applicability decision for procurement teams qualifying a complete door package rather than an isolated component. The short answer is neither, either, or both—depending on the component being evaluated. EN 1935 is a single-axis hinge standard, while EN 179 is an emergency escape device standard. A smart lock can share a door with hardware associated with either family without becoming part of either test scope. The en-1935 token used in the procurement file is therefore a routing label for the hinge question, not a statement that hinge requirements govern the lock.

Direct answer. The short answer is that en 1935 versus en 179 applicability is not one decision. It is a sequence. This article takes en 1935 versus en 179 applicability from en 1935 versus en 179 applicability through en-1935 to the record you keep. an en 1935 versus en 179 applicability is the conformity record. One en 1935 versus en 179 applicability claim sits with the manufacturer. Another needs an accredited laboratory. en 1935 versus en 179 applicability settles which is which.

en 1935 versus en 179 applicability is used here in the sense given under en 1935 versus en 179 applicability. It is a working definition of en 1935 versus en 179 applicability that carries no regulatory weight. The buyer still has to check it against the dated product page.

  • What the seller can produce — supplier declarations and drawings for en 1935 versus en 179 applicability
  • What only an issuer can verify — third-party certificates covering the exact scope of en-1935
  • What to request — the document set that matches the SKU behind en 1935 versus en 179 applicability
  • en 1935 versus en 179 applicability runs this sequence, and en 1935 is the record it produces.

To: Procurement Manager and door-package qualification teamDecision requested: Allocate standards and evidence requests to the correct door components before supplier approvalControlled scope: Hinges, emergency escape devices, electromechanical locking, and related door interfacesReference rule: Use the current published edition and route clause-level decisions to the standard text

Procurement question and component allocation

A standard describes what the standard tests. It never says that a particular site or door is certified. Procurement therefore needs a component schedule before it needs a standards decision. The schedule should identify the hinge, escape device, smart-lock body, cylinder, door closer, hold-open device, and fire or smoke door assembly separately.

Qualification questionEN 1935 routeEN 179 route
Which component is under review?Single-axis hingeEmergency escape device
What is the normal scope?Building hardware for single-axis hingesEmergency escape devices operated by lever handle or push bar
What does the designation leave unanswered?Locking, latch operation, cylinders, radio, EMC, and escape-device operationLocking performance, cylinders, radio, EMC, and hinge performance
How does it relate to the smart lock?The hinge may share the door, but the lock remains outside this scopeThe escape device may share the door, but the lock remains outside this scope
What evidence unit should be requested?The relevant hinge and its test configurationThe relevant escape device and its test configuration
What decision can follow?Include EN 1935 on the hinge line onlyInclude EN 179 on the escape-device line only

This separation prevents a common category error: treating hardware that shares a door leaf with the smart lock as part of the smart lock’s evidence package. The same discipline applies to the door hardware specification. A combined schedule can contain EN 1935, EN 179, and a locking-family designation without implying that one report covers the entire assembly. The catalogue side of this is the smart door locks.

CONFIRM-WITH-LOCAL-STANDARD-OWNER: Verify the current published title, scope, national adoption, and amendments for both designations with the relevant local standard owner or qualified reviewer before inserting either into a project specification.

EN 1935: the hinge question in the door package

The EN 1935 hinge standard belongs on the file when the procurement scope includes a single-axis hinge. Single-axis hinge applicability is determined by the hinge itself, not by the presence of a smart lock, an electronic credential reader, or an access-control policy. The correct data request therefore asks the supplier or door-hardware contractor to identify the hinge designation, product reference, and evidence supplied for that component.

The current edition of EN 1935 must be named before clause-level requirements are quoted. Ask for the published title and scope, then route detailed dimensional, performance, or marking requirements to that text. Do not transfer requirements from a latch, lock, cylinder, escape-device, radio, or electrical-safety file into the hinge line.

A hinge test report should be matched to the hinge construction and configuration offered for the project. If the evidence names a sample but cannot be connected to the offered hinge, record it as sample evidence rather than complete component coverage. This is especially important when several hinge types appear in one package, because one hinge reference cannot represent all of them.

EN 1935 for Smart Locks: Scope, Tests and What the Standard Never Proves explains the scope boundary, while Reading an EN 1935 Test Report Page by Page: A Smart Lock Buyer Walkthrough provides the practical method for checking what was tested. Use both at the component level rather than as substitutes for the current standard text.

EN 179: the escape-device question in the door package

The EN 179 emergency escape device designation belongs on the file when the package includes an escape device of the type covered by that designation. The procurement task is to identify the operating arrangement and confirm its published scope. A lever-operated escape device should not be described through panic-bar requirements, and the two exit-device families should not be merged in the evidence schedule.

EN 179 addresses emergency escape devices operated by lever handle or push bar. By contrast, EN 1125 addresses emergency escape devices operated by a horizontally actuated panic bar. If the door package contains the latter, request the applicable EN 1125 route. Record the actual device type before asking a supplier to nominate evidence.

The current edition of EN 179 and its published scope must be attached to the request. Its evidence should describe the escape device submitted for evaluation, while the smart-lock evidence should describe the lock offered for the project. A lever-operated escape device and a smart lock can interact in the door schedule, but neither designation converts the other into part of its test scope.

Avoid asking an escape-device report to establish lock durability, cylinder resistance, radio behaviour, electrical safety, or hinge performance. Those are separate evidence questions. If a project team is uncertain which exit-device family is present, hold that line open until the physical hardware has been identified and the published scope has been checked.

CONFIRM-WITH-LOCAL-ESCAPE-ROUTE-REVIEWER: Confirm the exit-device family, current published scope, and any project-specific escape-route requirements with the responsible local reviewer before release.

The smart-lock line needs a locking-family question

For the lock itself, neither EN 1935 nor EN 179 is the closest functional family. EN 14846 is the closer fit for the mechanical-electrical locking function of a battery-driven smart lock. Other door hardware may still trigger separate standards questions, but those references belong to their own component lines.

Smart-lock component or functionStandards family to investigateProcurement question
Electromechanically operated lock and striking plateEN 14846Which mechanical-electrical locking function and test configuration were evaluated?
Mechanically operated lock, latch, or locking plateEN 12209Is the project including a separate mechanically operated locking component?
CylinderEN 1303Which cylinder was included, and what is its evidence scope?
Mechatronic cylinderEN 15684Check the published title and scope against the proposed cylinder operation.
Multi-point locking systemEN 15685Check the published title and scope; do not apply it to a single-point lock without support.

This table is a routing aid rather than a selection certificate. A smart lock may contain several component types, and the package may also use a standard physical lock, a cylinder, and an electronic controller. The procurement record should identify what each evidence document actually covers.

The key decision is simple: EN 1935 can qualify a hinge line, EN 179 can qualify an escape-device line, and EN 14846 can qualify an electromechanical locking-function line. None of them should be used to imply that the entire smart lock has passed every relevant family of tests.

Applicability matrix for common door configurations

Door configurationEN 1935 allocationEN 179 allocationAdditional evidence laneProcurement disposition
Smart lock with one single-axis hingeHinge line onlyNot applicable to the hingeSmart-lock locking functionApprove each component against its own evidence
Smart lock with a lever-operated escape deviceNot applicable to the escape deviceEscape-device line onlySmart-lock and hinge recordsKeep the escape device separate from electronic locking
Smart lock with a horizontally actuated panic barNot applicable to the panic barEN 1125 route insteadSmart-lock and hinge recordsCorrect the exit-device citation before review
Smart lock on a fire or smoke door assemblyHinge line only if included in the assembly scopeEscape-device line only if includedAssembly test evidence and controlled-opening reviewKeep hardware claims subordinate to assembly evidence
Smart lock with an electrically controlled hold-open deviceNot applicable to the hold-open deviceNot applicable to the hold-open deviceEN 14637 route where the published scope appliesReview the complete opening-control arrangement
Retrofit door with mixed legacy hardwareIdentify every installed hingeIdentify every escape deviceExisting-condition and smart-lock evidenceSurvey before transferring any supplier statement

The table answers the title question at package level. “Which one applies to your smart lock door?” becomes “Which one applies to each named component on this door?” Once the component schedule is populated, standards references can be allocated without creating a misleading blanket claim.

A blank entry is preferable to an assumed entry. If the hinge type is unknown, mark the EN 1935 line as unresolved. If the escape hardware has not been identified, mark the EN 179 line as unresolved. Procurement can then issue a precise question rather than accept a convenient but irrelevant certification statement.

Component-first qualification sequence

flowchart TD
    A[Door package qualification] --> B{Identify the component}
    B -->|Single axis hinge| C[EN 1935]
    B -->|Escape device| D[EN 179]
    B -->|Panic bar| E[EN 1125]
    B -->|Electromechanical lock| F[EN 14846]
    B -->|Fire door assembly| G[EN 1634-1]
    B -->|Electric hold open| H[EN 14637]
    C --> I[Collect component evidence]
    D --> I
    E --> I
    F --> I
    G --> I
    H --> I
    I --> J[Match scope and variant]
    J --> K[Record qualification decision]

For en 1935 versus en 179 applicability, the component-first sequence is the control that prevents scope leakage. Start with the physical item and its function, identify the candidate standards family, obtain evidence for that component, and then compare the evidence scope with the offered item. Finish by recording the decision on the component line rather than compressing every result into one project-wide statement.

The sequence also handles mixed doors. A retrofit can contain a newer smart lock, an older hinge, a mechanically operated latch, and an escape device selected under a different schedule. Each item keeps its own designation, evidence record, and unresolved-question flag. No supplier needs to create a single unsupported “EN 1935 and EN 179 smart lock” claim to complete the package.

Evidence anatomy for the component file

The test report and certificate must be treated as separate documents. A request for “EN 1935 and EN 179 certification” gives a supplier no way to identify which document is expected. Ask for named evidence, tied to a component, model, sample, or variant as appropriate.

Evidence itemWhat it actually representsMinimum traceability for this decision
marketing imageA presentation of a claim or markingUseful for identification only; insufficient as the procurement basis
self-declared DoCThe manufacturer or importer’s own legal claimNamed issuer, applicable product, signed and dated document
test report on a sampleEvidence that a sample was testedTest body, report number, sample description, tested configuration, and date
third-party certificate with scope and numberA body’s attestation with a defined scopeIssuing body, certificate number, scope, validity where stated, and covered references
certificate for the exact SKU/variant being purchasedEvidence aligned with the item being purchasedExact product, model, variant, and component coverage
production-control records that hold the approval open after the sample passedControls that help connect assessed requirements with productionScope, production location or control process, and applicability to the ordered item

A separate conformity-assessment certificate should identify its scope and validity. A declaration of conformity is the manufacturer or importer’s legal claim. A marking such as CE, UKCA, RCM, KC, or G-Mark is printed on a product or label and must not be treated as a test report or certificate by itself.

The evidence-quality sequence moves from a marketing image to a self-declared DoC, then to a test report on a sample, a third-party certificate with scope and number, a certificate covering the exact SKU or variant, and audit or production-control evidence. Commercial failure often occurs when procurement stops at the second or third stage and only discovers the missing production linkage after installation. For en 1935 versus en 179 applicability, the position on this ladder is what the purchase decision turns on.

CONFIRM-PER-SUPPLIER: Request a named evidence index that identifies the document type, issuer, scope, product or component coverage, report or certificate number where applicable, issue date, and any validity period.

RFQ schedule that keeps the standards separate

The RFQ should request component-specific evidence instead of a single combined statement. The Hinge Nobody Specified: Writing EN 1935 Into a Smart Lock RFQ offers a detailed hinge clause, which can be adapted without changing its fundamental scope.

RFQ lineBuyer instructionExpected responseQualification action
Component scheduleList every hinge, escape device, lock, cylinder, closer, and hold-open device separatelyManufacturer reference and component functionAllocate candidate designations
Standards editionState the current edition and published title used for each componentEdition, title, scope, and document locationLock the specification reference
Test evidenceIdentify reports issued for the offered configurationReport number, sample description, tested item, and dateCompare scope with the purchase
CertificateRequest any third-party conformity-assessment certificate relied uponIssuing body, number, scope, validity, and covered referencesMatch every named component
Declaration of conformityRequest the applicable manufacturer or importer declarationSigned, dated document with clear product identificationAssign it to its document category
MarkingRequest evidence of the marking shown on the ordered itemProduct label, packaging, or dated product imageVerify separately from test evidence
Production linkageAsk how the assessed sample relates to productionProduction-control or audit evidence, where relied uponIdentify the remaining evidence gap
Change controlAsk how design or production changes affect supplied documentsSupplier notification or control processDefine the re-review trigger

The expected response should permit the buyer to trace each claim to a document. “EN 1935 compliant” is not a useful line when several hinges are offered. “EN 179 compliant” is not useful when the package includes more than one exit-device family. The buyer needs the item, document, and scope stated together.

This RFQ approach supports smart lock procurement evidence without allowing a strong certificate for one component to mask missing evidence for another. It also lets procurement decide whether an unresolved item needs clarification, additional testing, a different product, or removal from the approved schedule.

CONFIRM-WITH-LOCAL-CONFORMITY-OWNER: Confirm which declarations, markings, certificates, and production-control records the local conformity-assessment route requires for the specific product and market before issuing the RFQ.

Site data for retrofit and mixed-hardware doors

A standards decision cannot be completed from a smart-lock product photograph. The door itself must be inventoried before the evidence request is issued. Office Smart Lock Site Survey provides a structured way to capture the opening and its installed hardware; Smart Lock Retrofit Site Survey addresses the additional condition questions raised when existing doors are being changed.

For each opening, record the leaf and frame identifiers, hinge manufacturer and reference, hinge axis arrangement, existing latch or lock, escape-device type, closer or hold-open arrangement, and the proposed smart-lock reference. If the hardware will remain, photograph and document its condition. If it will be replaced, preserve the before-and-after relationship so old evidence is not mistakenly carried into the new package.

EN 1935 When Retrofitting Smart Locks Onto Existing Doors explains why retrofit conditions alter the evidence comparison. An existing hinge may have no project-specific documentation, while a newly supplied escape device may carry evidence for a different variant. The remedy is a component-specific gap list, not a general statement about the retrofit package.

A site survey also separates an unresolved question from a negative finding. “Hinge reference not recorded” is actionable. “Hinge does not meet EN 1935” is a conclusion that requires the applicable standard and supporting evidence. Record only what the survey establishes and route the qualification question onward.

CONFIRM-WITH-LOCAL-DOOR-ASSEMBLY-REVIEWER: Confirm the scope of the site survey, the required condition records, and the responsibilities of the door assembler, access-control supplier, and building owner for the project.

Fire, smoke, and controlled-opening interfaces

A smart lock installed on a fire or smoke door cannot inherit assembly-level evidence from a component certificate. EN 1634-1 tests door and shutter assemblies, with hardware evaluated as part of the assembly. The procurement record should therefore distinguish a component document from the evidence for the complete tested door assembly.

EN 14637 covers electrically controlled hold-open systems for fire or smoke door assemblies. Its own scope expressly places battery-only systems outside that scope. EN 1154 concerns controlled door closing devices powered by the user, while EN 1155 concerns electrically powered hold-open devices for swing doors. Each item therefore needs its own scope check.

The escape-device route remains separate. EN 179 may be relevant to the escape device, while EN 1125 remains relevant to a horizontally actuated panic bar. The fire-door, hold-open, escape-device, and smart-lock records should appear as linked but distinct lines in the door schedule.

CONFIRM-WITH-LOCAL-FIRE-ASSEMBLY-OWNER: Confirm the assembly scope, applicable door records, hardware configuration, and review authority for any fire or smoke door before treating component evidence as sufficient for the complete opening.

Failure patterns in the evidence package

Failure patternWhat procurement seesWhy it failsCorrective request
Lock cited as EN 1935 hardwareA hinge designation attached to the smart-lock lineComponent families have been mergedSplit the hinge and lock records
EN 179 report used for the lockEscape-device evidence presented as lock evidenceThe tested function is differentRequest lock-function evidence separately
Panic bar indexed as EN 179The wrong exit-device family is recordedThe operating arrangement has not been separatedIdentify the device and check EN 1125
Marking image treated as proofA product label or promotional imageThe image does not identify the underlying document scopeRequest the named report, certificate, or declaration
Sample report matched looselyA report for a similar hinge or deviceConfiguration and variant coverage are unclearReconcile the sample description line by line
Wrong certificate versionA document number does not match the current project referenceEdition or issue control is incompleteVerify the current edition and document status
Certificate scope excludes the itemA valid certificate exists for another product or familyThe certificate does not cover the purchaseRequest evidence for the exact component or variant

These are scope failures, not merely paperwork failures. A document can be genuine and still be unusable because it covers the wrong sample, component, variant, or door arrangement. The qualification record should state the exact mismatch so that the supplier can respond with a defined document rather than repeat a general compliance claim.

The most effective corrective request is narrow: identify the missing relationship between the tested item and the offered item. That request can be fulfilled with a revised report, a scoped certificate, production-control evidence, a different component, or a clarification that another standards family was applicable.

Final qualification record

Create one row per component and require a disposition before approving the door package. The sign-off should explain which standard was checked, which evidence was used, and what remains unresolved.

Record fieldRequired entryDecision value
Component identityManufacturer reference, model, variant, and openingPrevents evidence from being transferred to another item
FunctionHinge, escape device, lock function, cylinder, closer, hold-open, or assemblyPrevents scope mixing
Candidate designationCurrent edition, published title, and confirmed scopeEstablishes the relevant standards family
Evidence documentDocument type, number, issuer, date, and covered itemEstablishes what evidence exists
MarkingWhere and how the marking appears on the ordered itemKeeps marking separate from conformity evidence
Scope matchExact, partial, unresolved, or outside scopeMakes the qualification outcome visible
Gap ownerSupplier, door assembler, access-control contractor, or project reviewerAssigns the next action
Release statusAccept component, hold component, replace component, or route to authority reviewPrevents an unresolved line from disappearing

For the smart-lock line specifically, record that EN 1935 and EN 179 were evaluated only as adjacent-component questions. On the hinge line, record EN 1935 only when a single-axis hinge is present and the evidence matches that hinge. On the escape-device line, record EN 179 only when the device falls within its published scope; route a horizontally actuated panic bar to EN 1125.

If the component is absent, mark the line not applicable rather than leaving it blank. If the current scope cannot be confirmed, keep the line unresolved. If the evidence covers a sample but not the offered variant, record the exact gap. These dispositions give procurement a more reliable basis than a single certification label.

Readers comparing approaches usually start with how to choose between smart lock technologies. That is the same question en 1935 versus en 179 applicability has to answer here.The next procurement action is to send each shortlisted smart lock supplier a component schedule and evidence index before requesting final commercial approval. Ask for the offered hinge, escape device, and lock references first; then request the matching reports, certificates, declarations, markings, and production-control records. This sequence keeps hinge, escape, fire-door, lock-function, radio, and electrical questions in their proper lanes and makes the final approval decision traceable to the complete door package.

The next step is to request a quote.

Το καλάθι σας
Η εμπειρία σας σε αυτόν τον ιστότοπο θα βελτιωθεί με την ενεργοποίηση των cookies Πολιτική cookies
Chat on WhatsApp