En 1155 smart lock scope limits: learn how EN 1155 scopes electrically powered hold-open devices, what its tests evaluate, and which smart-lock claims remain.

Publisert tidligere: mai 25, 2023

EN 1155 for Smart Locks: Scope, Tests and What the Standard Never Proves

EN 1155 for Smart Locks: Scope, Tests and What the Standard Never Proves

Procurement teams often arrive with one instruction: “We need a smart lock, so EN 1155 must apply.” For en 1155 smart lock scope limits, the correct response is to separate the lock from the door-control device. EN 1155 concerns electrically powered hold-open devices for swing doors; it is not, by itself, a standard for the smart lock’s locking mechanism, radio, credentials, cybersecurity or installation.

Direct answer. To put it plainly: en 1155 smart lock scope limits has to hold for en 1155 smart lock scope limits. en-1155 has to hold at the same time. The sections below describe the order en 1155 smart lock scope limits is settled in. an en 1155 smart lock scope limits is the conformity record. One en 1155 smart lock scope limits claim sits with the manufacturer. Another needs an accredited laboratory. en 1155 smart lock scope limits settles which is which.

The term en 1155 smart lock scope limits carries one meaning throughout this article. It is the one given in en 1155 smart lock scope limits. That is a working definition of en 1155 smart lock scope limits, and the buyer still has to check it against the dated product page.

  • What comes from the factory — supplier declarations and drawings for en 1155 smart lock scope limits
  • What needs an external body — third-party certificates covering the exact scope of en-1155
  • What to order — the document set that matches the SKU behind en 1155 smart lock scope limits
  • en 1155 smart lock scope limits runs this sequence, and en 1155 is the record it produces.

This bid sheet translates that scope into qualification questions, evidence requirements and rejection rules. It gives the procurement manager language for the tender without treating a standard as permission to approve a particular site or installation.

CONFIRM-WITH-LOCAL-DOOR-HARDWARE-SPECIFIER: Verify the published title and scope of the current edition of EN 1155 against the door-control specification before issuing the invitation to bid.

Read the published EN 1155 scope before writing the smart-lock line

The published EN 1155 scope is the controlling reference for this tender. The current edition covers electrically powered hold-open devices for swing doors. It does not cover manual closers, and it does not turn a battery-driven smart lock into an EN 1155 device merely because both products sit on the same door. What the specification covers is in the smart door locks.

The smart lock may release a latch or bolt, control access or report an event. An electrically powered hold-open device has a different procurement function: the buyer needs evidence that the device within the defined scope has met the requirements and test methods published in the standard.

A compliant tender therefore identifies the device before it names the evidence. It should record whether the scope includes:

  • An electrically powered hold-open device for a swing door.
  • A related manual closer that forms part of the installed door-control arrangement.
  • A smart lock with a separate latch or bolt-release function.
  • A fire-door or smoke-door assembly requiring an electrically controlled hold-open system.
  • A central power, detection interface or building-control connection.

The exact test sequence, operating conditions, measurements and acceptance criteria belong in the current published standard and the project specification. The bid should not reproduce remembered thresholds or substitute a general certificate for the edition actually required.

Scope decision: which device owns the required function?

A procurement decision should begin with the function being purchased. The table below is a scope comparison, not a certification claim.

Procurement questionEN 1155EN 14846EN 14637EN 1634-1
What is the principal scope relevant to the question?Electrically powered hold-open devices for swing doorsLocks, latches, electromechanically operated locks and striking platesElectrically controlled hold-open systems for fire and smoke door assembliesFire-resistance tests for complete door and shutter assemblies
Which smart-lock function is closest to that scope?A separate door-control function, not the lock’s locking functionEN 14846 electromechanical locking is the closer fit for a battery-driven lock’s mechanical-electrical operationA fire-door system question, not a general smart-lock questionAn assembly test that includes installed hardware
What must the buyer avoid inferring?That a smart lock, manual closer or site installation passes the standardThat radio, credentials or EMC are coveredThat it applies to an ordinary non-fire door or a battery-only systemThat a standalone smart lock receives a fire-resistance conclusion
Evidence routeApplicable test report, certificate or declaration for the actual deviceLock-specific evidence under the correct current editionFire/smoke-system evidence and assembly-level reviewDoor-assembly test evidence relevant to the specified assembly

This table prevents the most expensive category error: asking a lock standard to prove a hold-open device, or asking a hold-open standard to prove the complete door assembly. Each document answers the question stated by its own scope.

At bid-issue stage, record one scope decision for each scheduled item. Name the product, its primary function, the door classification and the evidence owner. A powered hold-open device on a non-fire swing door calls for EN 1155 evidence for that device. A battery-driven lock that controls a latch or bolt calls for lock evidence under EN 14846. A powered hold-open arrangement on a fire or smoke door calls for EN 14637 and the applicable assembly review, while EN 1634-1 answers the assembly-test question rather than the lock-product question. If one package contains several devices, create separate evidence lines and a separate interface line for the arrangement between them.

The scope decision is not a technical approval, nor does it relieve the bidder from identifying the exact sample, model and options tested. It prevents an evaluator from borrowing a conclusion from the wrong document and gives suppliers a clear route to correct any misclassification before the commercial response. The evaluator should be able to trace every requested standard to one purchased function, every certificate to one product scope and every unresolved interface to a named party.

flowchart TD
    A[Define purchased function] --> B{Identify device role}
    B -->|Powered hold open| C[EN 1155 device route]
    B -->|Electromechanical lock| D[EN 14846 lock route]
    B -->|Fire hold open system| E[EN 14637 system route]
    B -->|Fire door assembly| F[EN 1634-1 assembly route]
    C --> G[Name evidence documents]
    D --> G
    E --> G
    F --> G
    G --> H[Match sample scope and production]
    H --> I[Verify interface and award]

CONFIRM-WITH-LOCAL-CONFORMITY-SPECIFIER: Confirm the current editions, amendments and project-specific route for each standard named in the tender; do not merge their scopes into one conformity statement.

Separate the smart lock from the hold-open device

A smart lock hold-open device is not a substitute category created by combining two products. The tender should assign each item a functional role, even when one supplier packages them together.

Where the smart lock controls the latch or deadbolt, ask for evidence covering its electromechanical locking function, including the exact lock body and striking plate. Where a separate powered device holds the swing door open, ask for EN 1155 evidence for that device. The same project may therefore require two technical schedules.

The interface also needs a named owner. Record which equipment commands the hold-open function, which equipment detects the door position, what happens when power is removed, and who tests the combined operation. This is an interface requirement; it is not permission to infer that either individual product covers the complete installation.

Use the Office Smart Lock Site Survey to capture the door, frame, access-control and operating facts before equipment schedules are released. For an existing door, the Smart Lock Retrofit Site Survey should capture retrofit constraints rather than leave them for installation-day interpretation.

Name the evidence document before calling it proof

The words “the supplier has EN 1155” do not identify the evidence. A bidder must state whether it is offering a test report, a certificate, a declaration of conformity or product marking.

Evidence itemWhat the document actually representsMinimum content the buyer should requestProcurement limit
Test reportA body tested a particular sampleLaboratory, report number, sample description, standard edition, test results and issue dateA report for a different model or variant cannot close the line automatically
CertificateA body attests conformity within a defined scopeAttesting body, certificate number, scope, covered model or family, validity and issue dateThe scope and validity must match the exact purchase
Declaration of conformityThe manufacturer or importer makes its own legal conformity claimSigned and dated declaration, applicable legislation or standard route, product identification and responsible partyIt is not a substitute for a requested third-party certificate
MarkingA market-access mark appears on the product or labelClear photograph, exact SKU and the underlying declaration or supporting recordThe printed mark alone does not identify the underlying evidence or project suitability

For the EN 1155 test report line, verify the tested sample against the offered product. For a certificate, verify the exact model, variant, optional components and any restrictions. A certificate that covers a family must be supported by documentation showing that the purchased variant falls within that coverage.

A declaration of conformity is especially easy to overread. It records the responsible party’s claim; it does not, by itself, show that an independent body tested the offered sample. Conversely, a test report does not prove current production remains equivalent to that sample.

CONFIRM-WITH-LOCAL-MARKET-ACCESS-SPECIFIER: Confirm which market-access marking regime and declarations apply to each SKU, and retain the evidence behind any CE, UKCA, RCM, KC or G-Mark shown on the product or label.

Move up the evidence ladder before award

Use the following evidence-quality ladder when comparing bids. The order is useful because it exposes where a supplier’s claim stops:

  1. Marketing image
  2. Self-declared declaration of conformity
  3. Sample test report
  4. Scoped third-party certificate
  5. Certificate naming the exact SKU/variant ordered
  6. audit evidence showing the approval still holds after the sample passedUnder en 1155 smart lock scope limits, the rung that governs the order is the one naming the ordered variant. The relevant scope here is en 1155.

The commercial failure often occurs at rung two or three: the bid appears acceptable, but nothing demonstrates coverage of the SKU that will actually be installed. A higher rung is not merely a better-looking PDF. It must answer the product, variant, production and scope questions relevant to the order.

For bid specification evidence, ask bidders to identify the rung they are offering for every applicable line. If the evidence is a test report, the bidder should state what changed between the tested sample and the offered product. If it is a certificate, the bidder should state why the named variant falls within its scope. If it is a declaration, the bidder should identify the laboratory or certificate that sits behind any separate claim.

All certification status remains CONFIRM-PER-SUPPLIER until the named evidence has been checked against the purchase. The procurement record should preserve the document identifier, issue date, scope and any conditions rather than storing only a screenshot or a logo.

Require a line-by-line bid response schedule

en 1155 smart lock scope limits — bidder response schedule

ReferenceInformation required from bidderAcceptable supporting evidenceResponse that needs clarification
ScopeIdentify the device, its function and the door typePublished scope, product description and application statement“Smart lock” is the only product description
Standard editionState the edition and amendments used for the offerCopy or reference to the current published standardA standard number without an edition
Tested configurationIdentify the exact model, variant and relevant optionsTest report with matching sample descriptionReport for a visibly or technically different configuration
Third-party evidenceProvide any certificate relied uponCertificate with body, number, scope and validityA certificate whose scope does not cover the order
DeclarationProvide the signed and dated declaration where relied uponDeclaration identifying product and responsible partyUnsigned marketing copy or certificate image
Production controlExplain controls between sample testing and productionAudit or production-control records and change process“Same factory” without traceability
Door interfaceIdentify power, signals, sensing and responsibility boundariesInterface drawing and functional descriptionNo defined interface between lock and door-control device
InstallationState fit, commissioning and handover obligationsInstallation and test instructionsProduct approval treated as site acceptance

A bidder may answer “not applicable” where a row genuinely does not apply, but the explanation must show why. “Not applicable” is not acceptable where a powered hold-open device is within the tender’s defined scope, or where a smart lock performs a related electromechanical function.

The schedule also gives evaluators a consistent record. They can compare evidence for the same function instead of treating a polished certificate for one device as general assurance for every device in the package.

Use clause wording that prevents borrowed evidence

The following wording gives the tender editor a structure. It is suggested procurement language, not a reproduction of clauses from EN 1155.

Product identification. State the manufacturer, model, variant, power source, firmware identifier where relevant, and every option affecting the offered configuration. Require the bidder to identify any deviation from the evidence supplied.

Scope and edition. Require the bidder to state the current edition of EN 1155 used to demonstrate conformity for the electrically powered hold-open device, together with any amendments considered. Where the device is outside that scope, require a clear explanation and the alternative evidence proposed.

Evidence. Require the EN 1155 test report, certificate and declaration relied upon as separate attachments. A combined PDF must still allow the evaluator to identify each document, its number, date, scope and tested sample.

Variant coverage. Require explicit written confirmation that the model and options offered fall within the stated certificate scope. Where a family certificate is used, require the supporting model mapping.

Production continuity. Require the bidder to describe how the tested configuration remains representative of production, including how material or firmware changes are assessed. This is especially important when the bid relies on evidence created before the current production batch.

Interface allocation. Identify who supplies, wires, configures, tests and maintains each part of the door-control arrangement. Require an interface document that distinguishes product evidence from site commissioning.

Variance disclosure. Require every departure from the specified scope, evidence or interface to be listed. Silence must not be interpreted as conformity.

For more detailed drafting, the comparison in Electric Hold-Open on a Smart-Locked Door: The EN 1155 Clause, Buyer by Buyer can be used alongside this schedule. It helps the buyer identify which clause belongs to the smart lock and which belongs to the separate hold-open device.

Control model, variant and production changes

A correct sample report can still support the wrong purchase. The evaluation team should compare the model designation, hardware version, power configuration, mounting arrangement and any options relevant to the tested function. Cosmetic differences are not the only concern; a changed component or configuration can affect what was evaluated.

The same rule applies to certificates. Read the named scope, validity and restrictions rather than relying on the title page. Ask the bidder to map the offered SKU to that scope. If the mapping is not documented, mark the line for clarification instead of assuming family coverage.

The test evidence must also remain connected to production. For Reading an EN 1155 Test Report Page by Page: A Smart Lock Buyer Walkthrough, use the report’s sample and result information to structure this check. Then record how the bidder controls changes after testing.

For recurring procurement failures, Three Ways EN 1155 Evidence Dispointens Smart Lock Buyers is a useful companion when a compelling claim arrives with weak supporting records. The purpose is not to discard useful evidence; it is to identify exactly what remains unproved.

Verify door, power and interface at the site

EN 1155 evidence concerns the product scope. It does not prove that the offered device has been installed correctly, connected correctly or commissioned for the specified operation. Those conditions require project records.

The site record should identify the door swing, leaf and frame arrangement, opening direction, required held-open position, power source, connection method, detector or control interface, and the person responsible for each function. It should also record how the arrangement behaves during power loss and how the manual closer, if present, remains part of the door-control design.

Do not turn an EN 1155 document into an escape, fire-safety or building-code approval. Those decisions depend on the complete installation and the applicable project requirements. Likewise, do not infer that a lock’s access-control, radio or credential evidence is covered by a door-control standard.

CONFIRM-WITH-LOCAL-FIRE-DOOR-SPECIFIER: For any fire or smoke door, confirm the applicable assembly requirements, interface and authority review before applying an EN 1155 schedule; the general scope is not a fire-door approval.

The handover pack should reconcile the product evidence with the as-built interface and commissioning results. The EN 1155 Versus EN 1634-1: Which One Applies to Your Smart Lock Door comparison is particularly relevant where a buyer has received a door-assembly fire test document and mistaken it for a product qualification.

Reject non-responsive scope substitutions

The following substitutions should trigger clarification or a non-responsive finding rather than a favorable technical judgment.

Bidder responseScope problemRequired procurement action
“Our smart lock is EN 1155 tested”Smart-lock wording replaces the actual hold-open-device scopeRequest the tested device and evidence for that function
A manual-closer report is offered as EN 1155 evidenceManual closers sit outside the stated scopeAsk for evidence matching the powered device, or correct the product classification
EN 14637 evidence is offered for an ordinary non-fire doorA fire/smoke hold-open system is substituted for the defined non-fire applicationConfirm the door classification and request the applicable evidence
EN 1634-1 evidence is offered as a smart-lock certificateA complete assembly test is treated as product evidenceReview the assembly evidence only for the assembly question it addresses
A certificate for another model is offeredScope does not cover the offered SKURequest the missing scope mapping or variant-specific evidence
A marketing image or unmarked catalogue extract is offeredMarketing imageReturn the line as incomplete
A report cites the standard without an editionEdition control cannot be verifiedRequest the full report and edition information
“Factory approved” is used without traceabilitySelf-declared DoCRequest the audit or process records relied upon

These are not paperwork traps. They are scope controls that prevent the procurement file from acquiring a conclusion its source document cannot support. The evaluator should record which item is being proved and whether the offered evidence actually reaches it.

Score conformity evidence without turning it into a safety approval

Use a simple evidence decision for each schedule line: compliant, clarification required, or held pending evidence. A compliant line means the named document covers the offered configuration and answers the stated procurement question. It does not mean that the product is suitable for every door, market, escape route or building system.

Before award, ask the shortlisted bidder to close every clarification against the same records used in evaluation. Preserve the original report or certificate, the signed declaration where relied upon, the variant mapping and the production-control statement. Record each evidence identifier directly in the purchase documentation.

The final commercial instruction can then remain simple: issue the door schedule, evidence register and interface definition as one package; require the successful bidder to confirm that the production SKU and configuration remain within that evidence; and make any approved change subject to the same scope check.

Readers comparing approaches usually start with smart lock commercial security requirements. That is the same question en 1155 smart lock scope limits has to answer here.This approach gives the procurement manager a defensible EN 1155 position without borrowing assurance from EN 14846, EN 14637 or EN 1634-1. It also leaves suppliers with a clear path: identify the correct device, match the evidence to the exact SKU and disclose what the documents do not establish.

The next step is to request a quote.

Handlekurven din
Din opplevelse på dette nettstedet forbedres ved å tillate informasjonskapsler. Informasjonskapselpolicy
Chat on WhatsApp