SLK-760 Fitting Notes: What to Measure Before You Order
Ordering an SLK-760 should begin with evidence from the opening, not with a guessed door profile. The slk 760 door fit notes in this article create a staged survey record for procurement, installation and supplier review. They separate what the buyer can measure on site from what the manufacturer must confirm for the specific SKU. That distinction prevents a plausible door photograph or a copied opening schedule from becoming an unsupported fit approval.
Direct answer. The short answer is that slk 760 door fit notes is not one decision. It is a sequence. This article takes slk 760 door fit notes from slk 760 door fit notes through slk-760 to the record you keep. A slk 760 door fit notes treats one component on its own terms. slk 760 door fit notes names the tests that close it. slk 760 door fit notes is not accepted on a headline figure.
- Test what it does — confirm on the dated product page for the specific SKU behind slk 760 door fit notes
- Test where it stops — record where the technology in slk-760 stops working
- Plan the manual path — name the mechanical path that remains if slk 760 door fit notes fails
- For slk 760 door fit notes, the order below is fixed and slk 760 is the reference point.
The process moves from an opening register to door measurements, hardware inspection, operational checks and a documented release decision. It also creates a clean handoff for unresolved items. A buyer can use this workflow for new doors, retrofit work or a mixed project schedule without pretending that every opening has the same construction.
Set the fit decision before opening the order form
The supplied SLK-760 catalogue record provides an access and management baseline. It lists RFID/IC card: Standard and Passcode: Standard. The platform is described as hotel lock management software with a PC encoder and guest cards. The network record identifies a standalone lock and PC-linked card encoder, with no in-room network required. Functions include guest card issuance, floor and room permissions, check-in validity windows and unlock records.
The same record does not provide a populated door-fit, power, packing, capacity, version or environment specification. It therefore does not supply the dimensions needed to approve a particular opening. Confirm on the dated product page for the specific SKU, and request the dimension drawings, installation guide and full datasheet before releasing a purchase order.
These SLK-760 fitting notes use three release states so that an unresolved item cannot disappear into a general remark:
| Fit status | Meaning | Purchase-order consequence |
|---|---|---|
| Release | Site evidence matches the applicable dated drawing and all operational checks are complete | The opening may be included without an open fit condition |
| Conditional | The fit is plausible, but one named item still requires evidence or written confirmation | Include the condition and withhold final release for that opening |
| Hold | The door construction, hardware path or required drawing is unknown | Do not include the opening until the hold is resolved |
The process is sequential because each stage depends on the record created by the previous one:
flowchart TD
A[Freeze the opening schedule] --> B[Measure the door leaf]
B --> C[Inspect the mortise and strike path]
C --> D[Observe door operation]
D --> E[Check the credential setup]
E --> F[Assemble the evidence pack]
F --> G{Assign a fit status}
G -->|Release|H[Include fit data in the order]
G -->|Conditional|I[Close listed conditions before release]
G -->|Hold|J[Resolve drawing or site evidence]
Stage 1 — Build an opening register
Start with one row per physical opening. Do not use a room number as the only identifier because several doors may share a room number across phases, layouts or handover areas. Assign an opening ID that remains unchanged through the survey, drawing, quotation and order records.
Record the door location, current hardware, frame construction, planned operation and project stage. If the work is not yet complete, mark the opening as provisional and photograph the visible construction. A provisional opening can remain in the project record, but it cannot receive a release status based on information that will change later.
| Register field | What the surveyor records | Why it matters |
|---|---|---|
| Opening ID and revision | Unique ID linked to the current drawing revision | Keeps every later measurement traceable |
| Location and use | Door position, adjacent wall, room or common area | Identifies frame and operating context |
| Door and frame type | Leaf construction, frame construction and visible finish | Links the opening to the correct survey method |
| Existing hardware | Lock, latch, strike, closer and frame attachments | Reveals what may need removal or alteration |
| Project stage | Existing, under construction or handover | Determines whether measurements are provisional or final |
| Evidence owner | Person or discipline able to answer the open item | Prevents unresolved questions from remaining anonymous |
Freeze the opening schedule before sending measurements to the supplier. If a door number changes later, update the revision rather than replacing the record. This preserves the audit trail from the initial survey to the final fit decision.
Stage 2 — Measure the door leaf and frame
Hotel door measurements belong in a site record with a drawing reference, measuring date, unit and observer. They are not automatically SLK-760 specifications. The door thickness measurement must describe the actual leaf and the rebate measurement must describe the frame pocket where the lock body is intended to sit.
Measure the leaf thickness at more than one height and record the readings rather than averaging away an irregular edge. The door thickness measurement, leaf width, leaf height and rebate depth should all be captured. Note the door swing, hinge side and whether the lock is intended for an active or inactive leaf. The spindle position and backset require direct measurement from the established lock reference line.
Do not drill, cut or remove a strike to obtain a measurement. If the spindle hole is concealed, record it as concealed rather than estimating it from a catalogue image. The same rule applies when the frame rebate is covered by trim or a finished surface.
| Measurement | Survey method | Record | Avoid |
|---|---|---|---|
| Door thickness measurement | Measure the leaf edge at upper, middle and lower positions | Individual readings, unit and date | Treating a nominal door schedule value as confirmed |
| Leaf width and height | Measure across the visible leaf at lock and hinge references | Minimum and maximum dimensions | Assuming the finished opening is square |
| Frame rebate | Measure exposed depth and width at the lock pocket | Clear, covered or partly concealed status | Assuming the pocket matches a general hotel-door profile |
| Backset | Measure from the door edge to the spindle centreline | Axis reference and actual value | Estimating from latch projection alone |
| Spindle interface | Record visible size, shape and whether the hole is exposed | Hole position, access condition and conflict notes | Inferring compatibility from the product name |
| Floor and undercut | Measure the closed-door gap at several points | Finished-floor condition and local obstruction | Ignoring the final floor covering |
Record both metric and project-unit values when the site team uses imperial drawings. Keep the source of each conversion visible. A converted number can be useful, but it should never replace the original observation.
Stage 3 — Inspect the mortise, latch and strike path
The mortise case inspection identifies the existing lock cavity, faceplate position, latch or deadbolt behavior and the relationship between the spindle and the door edge. Where authorized, remove an interior cover so the case can be viewed directly. If authorization or access is unavailable, document the obstruction and request the relevant drawing.
The backset and spindle check must be treated as a paired operation. A matching backset does not establish that the spindle or fixing arrangement will work, and a visible spindle does not prove that the mortise case or strike path is suitable.
| Hardware check | Evidence to capture | Procurement implication |
|---|---|---|
| Mortise case inspection | Case dimensions where visible, fixing points, internal clearance and cover access | Request the matching SLK-760 drawing if any dimension remains uncertain |
| Latch or bolt | Type, projection, throw and movement through the closed position | Identify a faceplate, case or strike condition if the action differs from the drawing |
| Strike plate alignment | Position, fixing holes, keeper engagement and frame movement | Request frame adjustment or replacement as a separately scoped item |
| Strike keeper | Material form, opening dimensions and attachment to the frame | Do not assume the keeper can accept the intended bolt |
| Faceplate | Width, height, screw positions and edge projection | Reconcile every dimension with the dated product drawing |
| Spindle | Visible interface, alignment and required operating clearance | Hold the opening if the interface cannot be established |
| Cylinder and key path | Existing cylinder position, key projection and emergency-access route | Record the retained service function without inferring model compatibility |
A strike plate alignment photograph should show both the leaf edge and the frame receiver in one frame. Add a close view of the fixing points and a side view of the latch or bolt entering the keeper. These views reveal alignment errors that a front-facing image can hide.
The words split-style in the product name do not replace a dimension drawing. Do not infer the panel arrangement, case geometry, spindle position or frame relationship from the name alone. Use the applicable dated drawing for the specific SKU and record the drawing revision beside the survey.
Stage 4 — Observe how the door actually operates
A lock can appear to fit while still colliding with a closer, floor covering, frame edge or hold-open device. Open and close the door through its normal travel. Observe the latch and bolt from both the room side and the approach side. Record any rubbing, binding, misalignment or need to force the door.
Do not adjust the closer, strike or frame hardware merely to complete the survey. If adjustment appears necessary, mark the opening conditional and route the proposed work for approval. A field adjustment made before the fit decision can erase evidence of the original condition.
| Operational observation | Test action | Record |
|---|---|---|
| Door swing | Open and close from the normal approach position | Clearance conflicts, rubbing points and required operating force |
| Door closer | Observe the full swing with the proposed lock area visible | Bracket interference, arm position and whether the closer can remain |
| Hold-open device | Operate it with the door at several angles | Linkage conflict and required relocation |
| Existing escape device | Observe the existing arrangement without modifying it | Position relative to the proposed panel and operating path |
| Floor transition | Open and close across the finished floor or covering | Raised covering, trim or threshold that affects the leaf |
| Frame movement | Observe the closed and open positions under normal hand pressure | Visible movement around the strike or fixing area |
If the intended opening is fire-rated, part of an access-controlled system, or affected by an egress requirement, treat that as a question for the responsible local owner. Do not infer the opening’s status from its appearance.
CONFIRM-WITH-LOCAL-FACILITIES-OWNER: Confirm the intended door type, egress arrangement, fire-rating status and applicable access-control constraints for every opening with the local facilities owner and relevant authority.
Stage 5 — Check the credential and management context
The supplied catalogue record identifies RFID/IC card: Standard and Passcode: Standard. It also identifies hotel lock management software with a PC encoder and guest cards, a standalone lock and a PC-linked card encoder with no in-room network required. Confirm on the dated product page for the specific SKU before treating these capabilities as the approved configuration for the project.
The physical survey should still test the context in which cards and codes will be used. Identify where issuing and collection take place, how guest cards will be labelled, which rooms or floors receive permissions, and where unlock records will be reviewed. The catalogue lists guest card issuance, floor and room permissions, check-in validity windows and unlock records. Confirm on the dated product page for the specific SKU and the project software configuration.
| System check | Evidence required | Boundary of the check |
|---|---|---|
| Card issuing point | Desk or back-office location, card storage and handover process | Do not infer a read-distance value from the room survey |
| Card orientation | Illustrated way a guest is expected to present the card | Validate the actual reader and card combination |
| Permission design | Room and floor groups, validity-window examples and exception handling | Confirm the available functions for the dated SKU |
| Encoder connection | Location, workstation availability and local operating procedure | The catalogue identifies a PC-linked card encoder; confirm the current configuration |
| Record review | Who reviews unlock records and what action follows an event | Do not treat a record function as a retention or compliance guarantee |
| Passcode handling | Issue, change and withdrawal workflow | Confirm the specific SKU configuration and project requirement |
If a controlled card test is needed, record the card, reader, door, test position, time and result. Keep failed and successful attempts together. A single successful presentation is not a blanket range claim, and an absent test is not proof of failure.
For the related configuration decisions, use SLK-760 Credential and Software Configuration Options. It owns the credential and software decision angle; this fit file should retain only the observations needed to connect the lock to the opening and management workflow.
Stage 6 — Assemble one evidence pack per opening
An email thread with scattered photographs is not a fit record. Create one folder or document for each opening ID and place the measurement sheet, marked drawings, photographs, test notes and unresolved-item list inside it. The supplier can then compare one opening with one drawing revision and one release status.
Use consistent filenames. A practical pattern is the opening ID, survey revision and document type, followed by a short sequence number. This prevents a close-up of one strike plate from being mistaken for the corresponding opening.
| Evidence item | Minimum useful content | Owner |
|---|---|---|
| Marked drawing | Door position, dimensions, revision and drawing reference | Design or site team |
| Measurement sheet | Door, rebate, backset, spindle and floor readings with units | Site surveyor |
| Hardware photographs | Faceplate, mortise case, strike, keeper, closer and spindle views | Site surveyor |
| Operational note | Swing, closure, hold-open and floor interaction observations | Site or installer |
| Credential check | Issuing location and controlled test result where requested | Operations team |
| Dated product evidence | Product-page confirmation, dimension drawing, installation guide and datasheet | Supplier or product owner |
| Open-item response | Written answer, revised drawing, site action or approved exception | Responsible action owner |
Do not overwrite an earlier photograph when a correction is made. Retain the prior image with its revision. The change history may be needed to explain why a frame adjustment or different strike was requested.
The Office Smart Lock Site Survey provides a useful published reference for organizing site observations. Use this article’s opening-specific fields for SLK-760 evaluation, while keeping any wider building survey outside the fit decision.
Stage 7 — Classify each opening for procurement
The release decision compares three independent questions. First, does the dated SLK-760 drawing cover the observed construction? Second, can the proposed lock body and panel be installed without an unapproved door or frame alteration? Third, does the door complete its normal operation after the proposed work?
A positive answer to only one question is not enough. An opening may have a compatible frame but an unresolved floor gap, or a suitable spindle position but no confirmed strike arrangement. Assign the status to the opening rather than to the entire project.
| Observed condition | Evidence required | Decision comparison | Procurement action |
|---|---|---|---|
| Survey dimensions match the dated drawing | Measurement sheet and marked drawing agree | Fit can proceed with no open site condition | Mark Release and cite both evidence references |
| A field dimension remains uncertain | Concealed or inaccessible measurement identified | Current evidence cannot close the fit gate | Mark Conditional or Hold and request the missing view |
| Strike or keeper requires alteration | Current and proposed alignment are documented | Door work is required before installation | Price or schedule the work as a separate project item |
| Door operation is unresolved | Closer, floor or hold-open conflict is recorded | Hardware fit alone does not approve operation | Hold the opening until the operational check is cleared |
| Credential test is incomplete | Card, reader, position and result are not recorded | Management readiness remains unverified | Keep the condition open with the operations owner |
| Product evidence is unavailable | Drawing or dated page confirmation is missing | Compatibility cannot be assessed from the record | Hold and request product evidence before order release |
When the supplier responds to an open item, attach the answer to the opening ID. “Will fit” without a drawing reference is not closure. Closure requires either matching evidence, a revised drawing, an approved site change or a documented exclusion of the opening.
For the wider specification interpretation, compare this fit record with What the SLK-760 Data Sheet Actually Tells a Buyer. That article explains the product data; this process tests whether the physical opening is ready for the confirmed product configuration.
Stage 8 — Route exceptions without forcing a standard answer
Retrofits and nonstandard doors need the same evidence discipline but may require a different route. Do not assume that a new-door workflow applies to a frame that is already installed. The Smart Lock Retrofit Site Survey can support the wider survey, while this article controls the SLK-760 fit decision.
A frame modification, surface-mounted arrangement, glass-door fitting or concealed repair may change the installation route. Request the applicable dated product information and installation instruction for that situation. Do not extend a drawing for one door construction to another.
| Exception | Minimum evidence | Correct route |
|---|---|---|
| Existing frame is concealed | Available views, frame type and access condition | Obtain opening access or use a confirmed manufacturer drawing |
| Strike or rebate must change | Current dimensions and proposed alteration | Obtain site approval and a revised installation scope |
| Leaf is thinner or shaped differently | Door thickness measurement and cross-section photographs | Request a specific fit confirmation; do not use a standard-door assumption |
| Glass or patch fitting is involved | Glass construction, edge detail and applicable fitting documentation | Route to the relevant product evidence rather than the standard mortise workflow |
| Frame is still being built | Drawing revision and expected construction details | Keep the opening provisional until the final frame is surveyed |
| Door leaf or frame movement is visible | Observation record and responsible trade input | Hold release while movement is assessed |
| Lock position is concealed | Marked drawing and authorized inspection record | Treat the interface as unknown until inspected |
Record who will perform any remedial work. “Site to fix” is not a complete responsibility allocation. The file should identify the trade, the exact work, the acceptance evidence and the point at which the opening can return for review.
Avoid averaging several exception openings into one fit statement. Each opening keeps its own photographs, measurements, exceptions and status. This prevents an easy-to-measure door from masking a difficult frame elsewhere in the same order.
Stage 9 — Hand the fit file to quotation and purchase order
The fit file should travel with the commercial request, not remain in the surveyor’s notes. Submit the opening register, marked drawings, measurement sheets, photographs, operational observations, product evidence and unresolved-item list together. Any requested site alteration should appear as a clearly scoped line for the buyer to evaluate.
The purchase order fit data should be traceable. Do not convert a conditional opening into an unconditional line. If the order must proceed before one item closes, identify the affected opening, the exact condition, the owner and the evidence required for release.
| Handoff component | Required content | Destination |
|---|---|---|
| Opening schedule | Opening ID, drawing revision, fit status and site location | Quotation and purchase-order record |
| Fit evidence | Measurements, photographs and operational notes | Supplier and installation reviewer |
| Product confirmation | Dated page confirmation and matching drawings | Procurement file for the specific SKU |
| Site-work scope | Proposed alteration, responsible trade and acceptance condition | Quotation and project schedule |
| Credential readiness | Issuing location, configuration decision and test record | Operations and supplier teams |
| Unresolved-item log | Question, owner, required evidence and current status | Procurement follow-up register |
| Order wording | Fit reference attached to the relevant opening | Purchase-order line and supporting document |
Use SLK-760 Purchase-Order Checklist: What to Confirm Before Ordering as the final transaction checklist. This fit process supplies the physical evidence; that checklist controls how the product, documentation, configurations and order references are confirmed.
Do not request or approve a fit from a model name alone. The relevant evidence is the dated product-page confirmation and drawing for the SKU being ordered. If the catalogue record and the dated page differ, record which source was used for the decision and obtain supplier clarification before release.
Stage 10 — Run the approval timeline by exit gate
The timeline is a dependency sequence, not a promise about commercial timing. Each stage exits only when its evidence is complete. Procurement can begin a quote request while measurements are being collected, but the final opening release must wait for the applicable fit gate.
| Phase | Trigger | Main owner | Exit evidence |
|---|---|---|---|
| Opening register | Current door schedule issued | Procurement manager | Unique IDs and drawing revisions |
| Site survey | Opening list released for measurement | Site surveyor | Completed measurement and hardware records |
| Product check | Survey package submitted | Supplier or product owner | Dated page confirmation and matching drawings |
| Exception review | One or more conditions remain | Procurement manager | Written answers, revised evidence or approved exclusions |
| Operational review | Door and frame work completed | Site or installer | Swing, closer, floor and frame observations |
| Fit release | All relevant evidence is available | Procurement manager | Release status attached to each opening |
| Order attachment | Commercial terms selected | Buyer and supplier | Fit references included in the order package |
| Installation handoff | Order and approved evidence available | Installation team | Drawings and approved site work issued with the product |
Where roles overlap, record the named responsibility rather than using a department name alone. The supplier may answer a technical drawing question, but the buyer remains responsible for ensuring the answer is attached to the correct opening and that any site consequence is accepted.
A late change to the door, frame, lock position or card workflow reopens the affected gate. There is no need to resurvey unrelated openings when their evidence and revision remain unchanged. This keeps the review proportional while preserving a clear chain from measurement to order.
The same question is worked through in more detail in what smart lock is best for temporary access. That is the same question slk 760 door fit notes has to answer here.
Pre-order fit sign-off
A complete SLK-760 fit file answers the following for every included opening:
- The opening ID and drawing revision are consistent across all documents.
- Door, rebate, backset, spindle, faceplate, mortise and strike observations are recorded.
- The finished-floor, closer, hold-open and swing interactions have been reviewed.
- Any RFID/IC card or passcode context has been checked without inventing a read-distance value.
- The dated product-page confirmation and matching dimension drawing are attached.
- Every site alteration has a responsible owner and acceptance condition.
- Each opening is marked Release, Conditional or Hold, with no ambiguous status.
- Purchase-order wording refers to the same evidence used for the fit decision.
When those checks are complete, send the consolidated package with your request for a quote. Ask for the dimension drawings, installation guide and full datasheet applicable to the specific SKU, together with a written response to each open fit item. The objective is not merely to obtain a quotation. It is to create an order that an installer can interpret from the same measurements and drawings used to approve the opening.

