Cylinder and Key Control Specification in Retrofit Projects
Retrofit key control begins with an existing door survey, not a cylinder catalogue. For cylinder and key control specification retrofit projects, the schedule must separate what the client wants to retain from what can be replaced and which doors deliberately sit outside the hierarchy. This gives the client, installer and supplier one door-by-door basis for decisions.
Direct answer. In short, cylinder and key control specification retrofit projects is the subject of this piece. cylinder and key control specification retrofit projects is where the work on cylinder and key control specification retrofit projects sits. cylinder-and-key-control-specification is what has to be evidenced before anyone signs. A cylinder and key control specification retrofit projects is a resource for whoever writes the requirement. cylinder and key control specification retrofit projects turns a request for cylinder and key control specification retrofit projects into something a supplier can price.
cylinder and key control specification retrofit projects is used here in the narrow sense set out in cylinder and key control specification retrofit projects. It is a working definition built for cylinder and key control specification retrofit projects. It is not a statutory one, and it has to be read against the market and product concerned.
Annotated retrofit field record
For cylinder and key control specification retrofit projects, annotate each field with the document that proves it. A supplier statement without a named document, scope and holder remains unverified.
| Field | Required record | Acceptance evidence | Specifier annotation |
|---|---|---|---|
| Existing door cylinder survey | Door ID; lock type; key and cylinder references; faceplate and strike | Marked survey record | Check the installed door, not the catalogue |
| Retrofit key control schedule | Door ID, key group, hierarchy level and treatment | Issued revision | Name the access route for each exception |
| Master key hierarchy | Master, group and sub-group levels mapped to doors | Key schedule | Record who approves each level |
| Keyway compatibility | Proposed cylinder against existing keyway and retained hardware | Supplier check and physical sample | Do not infer compatibility from appearance |
| Key issue and return records | Holder, issue basis, receipt, return and exception method | Controlled register | Assign a register owner |
| Access credential register | Credential group and access rights cross-referenced to door ID | Issued register | Keep key custody distinct from access rights |
| Door-set dimensions | Backset, bore diameter, bolt-to-bore distance, faceplate and strike | Dimensioned submittal | Keep each dimension separate |
The dimension the installer needs is backset, stated in millimetres from the door edge to the centre of the spindle or cylinder; bore diameter and bolt-to-bore distance are separate dimensions. Record faceplate and strike as matched components and flag field alterations. A mock-up evidences fit, not ongoing performance. The range this procurement eventually buys from is the smart door locks.
Select a treatment for each door
Use a decision comparison rather than placing every door in one master system.
| Option | Choose it when | Evidence to demand | Result in schedule |
|---|---|---|---|
| Retain the existing cylinder | The client accepts the existing control arrangement and the survey supports continued use | Survey record, client approval and supplier compatibility check | Door stays in its recorded group with a dated decision |
| Replace under the master key hierarchy | The door must follow the approved hierarchy and the lock arrangement can accept the proposed cylinder | Key schedule, dimensional submittal and physical fit review | New cylinder maps to an approved hierarchy level |
| Use a dedicated group or exclude the door | Access responsibility differs from the wider building or exceptional control is required | Written reason, approving role and named access route | The exception appears in every relevant register |
| Lead with credentials and retain a manual route | Electronic access is preferred but controlled physical access is still required | Access matrix, supplier confirmation and authority decision | Key custody and credential rights are recorded separately |
The selected option becomes the door’s control objective. Record why it was retained, replaced, segregated or excluded. For proposed reuse, require evidence for the actual cylinder and hardware combination.
Evidence chain from survey to handover
Treat each step as a separate evidence transfer.
flowchart LR
A[Existing door survey] --> B[Retrofit key control schedule]
B --> C[Supplier submittal]
C --> D[Physical fit review]
D --> E[Recorded approval]
E --> F[Handover register]
The survey identifies what exists; the schedule states the intended treatment. The supplier submittal answers door-specific fields, and the physical fit review catches dimensional conflicts. Approval records the decision; handover transfers custody. A Smart Lock Retrofit Site Survey can structure field evidence, while an Office Smart Lock Site Survey offers a parallel format for occupied portfolios. Assign transfer ownership through Cylinder and Key Control Specification: Coordination Between Architect and Supplier.
Retrofit lock submittal: minimum evidence
Ask the supplier to answer door-specific fields rather than restate a catalogue. The retrofit lock submittal should include the dated product page for the specific SKU, dimensioned drawings, cylinder and keying format, keyway compatibility method, interfaces, deviations and each supporting document’s title.
- Survey reconciliation: identify retained components and proposed removals.
- Fit evidence: state each dimension’s unit and match the faceplate or strike.
- Control evidence: state cylinder format, hierarchy level and exception treatment.
- Change record: list assumptions, unresolved items and the responsible supplier contact.
CONFIRM-PER-SUPPLIER
Confirm cylinder format, keyway compatibility, interfaces and any cylinder or key-control capability on the dated product page for the specific SKU; do not infer a supplier claim from a family brochure. Use Cylinder and Key Control Specification: Documents a Specifier Should Demand to demand evidence. Cylinder and Key Control Specification: How Suppliers Respond provides a useful review structure.
Separate key custody from access rights
An access credential register answers who may present electronic credentials and at which doors; it does not answer who may hold a physical key. Cross-reference door IDs and exception codes without duplicating personal data. Record a mechanical override in the access decision, not as an extra master key line. For credential-led doors, state the manual route, custodian and approval.
Readers comparing approaches usually start with slk 8831 sample testing checklist. That is the same question cylinder and key control specification retrofit projects has to answer here.
Record decisions, exceptions and handover
Use four dated holds:
- Survey hold: the client accepts the surveyed door set and exceptions.
- Submittal hold: the reviewer records dimensional, compatibility and evidence findings.
- Approval hold: the selected treatment and any unresolved departure are signed by the named authority.
- Handover hold: key issue and return records reconcile with the access credential register and custody list.
Any door serving an escape route requires a separate locking-arrangement decision rather than inheritance from the master key plan.
CONFIRM-WITH-LOCAL-BUILDING-CONTROL
Confirm the required locking arrangement and supporting evidence with the local building-control authority for the project jurisdiction.
The submittal is not approved until the review is recorded and dated. Final handover should identify the schedule owner, each key recipient and how returns and exceptions reconcile. The retrofit key control schedule then becomes an operational record, not merely a purchasing attachment.
Close the loop with requesting a quote.

