Residential Door Realities for Smart Locks in the United States
To: Procurement Manager, Multifamily PortfolioFrom: Smart Lock Sourcing TeamSubject: Residential door fit and hardware evidence required before smart-lock evaluationDecision stage: Awareness to EvaluationControl tags:united-states; bhma-ul
Decision requested — united states residential door realities
This memo is a residential smart lock procurement brief that translates united states residential door realities into a door-by-door evaluation record. It does not recommend one lock for every opening. Instead, it defines the evidence needed before a candidate can enter technical review.
Direct answer. Short version — united states residential door realities is treated here as united states residential door realities first. bhma-ul comes second. The evidence for united states residential door realities is named in the sections below. An united states residential door realities sets out entry conditions for a single market. united states residential door realities decides which approval exists. The proof behind united states residential door realities is filed once united states residential door realities closes.
Read united states residential door realities as united states residential door realities. It is a working definition of united states residential door realities. Not a statutory or certified one. It applies to the market and product in question rather than as a general claim.
- Scope first — write down what united states residential door realities has to settle in the united states before any hardware is ordered
- Evidence second — attach the document behind each claim in bhma-ul, not a summary of it
- Owner third — record who signs united states residential door realities and who keeps the record afterwards
- For united states residential door realities, bhma ul is what each step has to answer to.
The working position is straightforward: approve evaluation only after each relevant door class has an identified hardware interface, an assigned evidence owner, and a documented fit route. The controlling question is: Will this fit a standard US pre-hung door? A portfolio-wide order based on that phrase alone leaves too much ambiguity. The hardware behind this is in the smart door locks.
Door classes behind the request
ANSI bore standards matter because tubular cylindrical locksets and mortise bodies dominate residential installations. That does not mean every unit or shared door has the same preparation. Door thickness, stile width, handing, backset, bore geometry, frame condition, closer position, sweep, trim, and any existing mortise pocket all affect the work.
A multifamily door fit survey should therefore use a controlled sample and then define how the remaining doors inherit the result. Record the door and frame identifiers, construction type, existing hardware, and installation constraints. Adapt the evidence discipline in the Office Smart Lock Site Survey, but replace office-specific assumptions with residential door and unit information. For existing stock, the Smart Lock Retrofit Site Survey is not the correct substitute; use the Smart Lock Retrofit Site Survey to structure the pre-existing condition.
| Door class | Reality to test | Evidence required | Procurement consequence |
|---|---|---|---|
| Standardized unit door | Often the most repeatable candidate for a common portfolio specification | Door schedule, physical interface, frame condition, and representative measurements | Validate one controlled specification rather than assuming every unit matches |
| Existing residential door | May contain a mortise body, retrofit hardware, or uneven prior preparation | Removal or inspection evidence, pocket condition, and repair method | Price preparation separately from the lock |
| Communal entrance | Has a different traffic pattern and an interface managed with other building hardware | Opening type, existing hardware, access-control responsibility, and egress questions | Evaluate separately from unit doors |
| Cycle store or parcel room | Durability and cleaning exposure may influence the hardware decision | Use pattern, environment, service access, and maintenance responsibility | Do not inherit the unit-door specification automatically |
Evidence that must travel with the hardware
The approval triad is the local authority having jurisdiction, the door hardware consultant, and the specifier. Their roles are different: the authority identifies project-specific requirements, the consultant resolves door and hardware interfaces, and the specifier controls the written requirement and submittal response.
ANSI/BHMA door preparation should be expressed as an applicable standard number and grade, not a brand promise. Depending on the opening, references may include A156.2 for bored locks and latches, A156.13 for mortise locks, A156.4 for door controls, and other parts of the A156 series covering cylinders, electromagnetic locks, electrified locking devices, strikes and frame-mounted actuators, power supplies, auxiliary locks, and multipoint locks.
A project may also request evidence associated with UL 294, UL 1034, or UL 437, together with project-specific review of NFPA 101, NFPA 80, and ADA/ANSI A117.1 operable-parts considerations. For a radio-equipped candidate, ask what evidence is relevant to FCC Part 15. Confirm the scope for the specific SKU rather than treating a brand name or family statement as proof.
Any dimensional fit, radio behavior, power characteristic, or other model-level claim must be confirmed on the dated product page for the specific SKU. The supporting record should connect that evidence to the identified door class.
CONFIRM-WITH-LOCAL-AHJ: Confirm the applicable code, life-safety, egress, accessibility, and listed-product requirements with the local authority having jurisdiction for each project.
New build, replacement, and retrofit need different records
A new-build unit may arrive under a repeatable door specification, while a residential lock replacement programme may confront mixed hardware and accumulated field changes. The procurement file should identify which category each opening belongs to before comparing installation methods or commercial proposals.
During a pre-hung door retrofit, confirm whether the existing lock can remain, whether the door must be modified, and who accepts responsibility for concealed or out-of-scope conditions. The Multifamily Portfolio Lock Replacement Programmes in the United States: Survey Before You Order provides a focused programme-level survey reference.
Do not transfer hotel property-hold or PMS chain assumptions into a multifamily operating model. Residential access may combine an operator-issued unit credential, a shared-space credential, and a staff master, but those roles should be mapped to actual property operations rather than inferred from another building type.
Portfolio economics: total cost per door
In build-to-rent and REIT portfolios, a common door specification can make the economics work because it is repeated across units and buildings. The constraint is total cost per door over the tenancy, not the isolated hardware acquisition price. A specification selected on unit price alone can omit door preparation, battery changes, turnover work, service calls, and spare-parts handling.
| Cost element | Evidence to collect | Why it belongs in the comparison |
|---|---|---|
| Hardware and credential components | Proposed bill of materials and SKU-level evidence | Establishes the candidate configuration |
| Door and frame preparation | Survey finding and defined installation method | Separates product work from building work |
| Installation and commissioning | Installer scope, training expectation, and handover record | Exposes labour dependencies |
| Turnover and battery maintenance | Operator workflow and responsibility matrix | Captures recurring unit-door work |
| Service and spare parts | Support route and parts planning assumption | Shows the consequence of a mixed portfolio |
Build the total cost per door using the same cost fields for every candidate. Keep confirmed facts separate from allowances and unresolved assumptions. This gives the procurement team a defensible basis for bid levelling and prevents a low hardware figure from hiding a higher installed or operating burden.
Approval path and pilot gate
Submittals, or-equal substitution requests, and bid levelling should use the same evidence index. For any proposed substitute, ask the supplier to state the door class it addresses, the applicable standard number and grade, the physical changes required, the installer prerequisites, and the documents supporting each claim.
The workflow is:
flowchart TD
A[Collect door schedule] --> B[Classify each door]
B --> C[Measure hardware interface]
C --> D{Physical fit confirmed}
D -->|No| E[Revise design or document exception]
D -->|Yes| F[Verify applicable evidence]
F --> G[Build total cost per door]
G --> H[Approve controlled pilot]
The door hardware consultant should review the interface, while the installer team confirms that the preparation and commissioning method are executable. The Training Installation Teams in the United States on Smart Lock Commissioning for ANSI Bored and Mortise Door Prep resource is relevant to that handoff. For broader multifamily criteria, compare the Specifying Smart Locks for Multifamily Portfolio Projects in the United States.
If public funding or procurement rules may influence the decision, ask which Buy American preference or state-level purchasing policy applies and request the written basis. Insurance or code consultation may also affect a hardware choice; record the source and scope rather than attaching an unsupported general statement.
CONFIRM-WITH-LOCAL-PROCUREMENT: Confirm Buy American preferences and any state or local purchasing policy that applies to the buyer, funding source, and project.
Privacy and operating roles
Door event logs are part of the operating proposition, not merely lock data. Ask how long events are retained, who can view them, how access is removed, whether property-management or resident-support teams can export them, and how disclosures are handled. State privacy obligations vary, while contract and operating policies can impose additional requirements.
Keep the question tied to the intended use: unit access, shared-space access, staff administration, incident review, and resident support. The evidence should identify the relevant event fields, administrative roles, hosting arrangement, and retention setting for each operating state.
CONFIRM-WITH-LOCAL-ATTORNEY: Confirm privacy, retention, disclosure, and access-control event-log obligations for the operating state and the operator’s contractual context.
Questions to put on the record
| Decision question | Minimum evidence | Owner |
|---|---|---|
| Which door classes are in scope? | Door inventory with representative and exception conditions | Property operations |
| What hardware is installed today? | Inspection record and removal or non-destructive findings | Door hardware consultant |
| Which standard number and grade applies? | Project specification and written evidence mapping | Specifier |
| Does the candidate fit the identified opening? | Dimensions and compatibility confirmed for the dated SKU | Supplier and consultant |
| What door work is required? | Preparation method, responsibility boundary, and installation sequence | Installer lead |
| What is the total cost per door? | Comparable hardware, labour, turnover, and maintenance assumptions | Procurement |
| What standards evidence is requested? | Dated project-specific documentation | Specifier |
| How will access records be governed? | Retention, role access, disclosure, and hosting record | Property operations and legal review |
These answers form the shortlist. A candidate missing one answer is not necessarily rejected, but the gap must be visible, assigned, and closed before portfolio approval.
Decision record and next action
The recommended decision is to advance a controlled evaluation, not to approve an unconditional portfolio order. Select representative unit, communal, and retrofit openings. Repeat the Office Smart Lock Site Survey evidence fields for residential records, and use the Smart Lock Retrofit Site Survey for the legacy hardware portion.
For united states residential door realities, the unit door is the repeatable case, while shared and retrofit openings need separate evidence. The pilot should therefore compare fit, installation effort, operator workflow, and total cost per door rather than rely on a generic compatibility label. The Smart Lock Pilot Projects in the United States: How to Scope a First Building guide can support the pilot boundary once the door classes are fixed.
The next commercial step is to provide the door inventory, jurisdiction, target credential pattern, and candidate shortlist, then request a documented fit review, dated SKU evidence, and comparable cost worksheet before seeking a portfolio proposal.
A quote request turns the written requirement into something a supplier can price: request a quote.

