Ask for traceable static and dynamic current test evidence, compare evidence tiers, and set clear acceptance criteria before approving a smart lock SKU.

Zveřejněno v:: led 10, 2023

Static and Dynamic Current Test Evidence a Buyer Can Actually Request

Static and Dynamic Current Test Evidence a Buyer Can Actually Request

A smart-lock buyer should not approve a power claim because a supplier has supplied one number without a test basis. The practical question is whether static and dynamic current test evidence identifies the exact lock revision, operating state, measurement method and acceptance limit. That makes the request a supplier-verification exercise rather than a hunt for the most flattering current figure. It also keeps battery sizing, motor and gearbox assessment and service planning on the same factual basis.

Direct answer. In short, static and dynamic current test evidence is the subject of this piece. static and dynamic current test evidence is where the work on static and dynamic current test evidence sits. static-and-dynamic-current is what has to be evidenced before anyone signs. A static and dynamic current test evidence is the engineering view of one component. static and dynamic current test evidence is the behaviour that has to be reproduced. Then static and dynamic current test evidence can be signed off.

Throughout, static and dynamic current test evidence means what static and dynamic current test evidence sets out. It is a working definition of static and dynamic current test evidence drawn from the evidence below. It is valid for the specific market and product, not as a general claim.

  • Confirm the feature — confirm on the dated product page for the specific SKU behind static and dynamic current test evidence
  • Confirm the constraint — record where the technology in static-and-dynamic-current stops working
  • Confirm the contingency — name the mechanical path that remains if static and dynamic current test evidence fails
  • This is the sequence static and dynamic current test evidence has to follow, anchored on static and dynamic current.

Four evidence tiers: what survives technical review

At qualification stage, the buyer is comparing evidence packages, not polished claims. Four tiers are common, although suppliers may present them under different labels.

Evidence tierWhat the buyer receivesDecision valueMain weaknessBuyer action
Marketing statementA current value without an operating definitionBasic screening onlyThe reader cannot determine what was measuredRequest the SKU, state, method and limit
Datasheet numberA nominal current listed beside product specificationsPreliminary comparisonA single value may hide several operating statesAsk which state the number represents
Test report summaryEquipment, conditions and a pass or fail resultMethod can be reviewedRaw observations may be unavailableRequest trace excerpts and unresolved deviations
Traceable evidence packageConfiguration, setup, raw data, calculations and acceptance criteriaSupports configuration-specific approvalMore work for both partiesUse as the qualification baseline

The fourth tier is the useful target because it makes supplier verification reproducible. A supplier may still have a valid reason for withholding raw files, such as confidentiality, but the buyer should then know exactly which conclusions can and cannot be supported.

Start with Reading Static and Dynamic Current Claims in a Supplier Datasheet to separate a nominal figure from a measured result. For the wider engineering decisions surrounding the evidence, compare Static and Dynamic Current Trade-Offs: Cost, Durability and Service. Neither article replaces the need for an SKU-specific test record.

Static current: define the state before asking for a number

Static current is meaningful only when the operating state is fixed. A lock may have different states before wake-up, after wake-up, while waiting for a credential, during lock engagement and after the mechanism settles. A result labelled merely “static current” does not identify which state was measured.

A useful static current test report identifies:

  • The exact SKU, finish option, hardware revision and relevant configuration
  • The operating state, including the actions completed before measurement
  • The power source and load condition used during the test
  • The measurement duration, averaging method and settling rule
  • The instrument, range, resolution and calibration status
  • The observed value, variation or limit and the criterion applied

For a battery-powered product, also ask whether the result was obtained from cells, a laboratory supply or another source. State the source voltage or operating condition rather than asking only whether the test used “real batteries.” If the lock has an emergency power port, identify whether that path was connected, disconnected or outside the test scope.

The first-party fact block for the SLK-9936S hotel lock records power as 4 × AA but does not provide either current value in the supplied material. Confirm on the dated product page for the specific SKU, then request the relevant static current test report rather than estimating a value from cell count. The same rule applies across the 79-model catalogue: a power description is not a substitute for a measurement record.

This evidence also forms part of the smart lock power budget. It can support a stated operating load, but it does not by itself establish endurance under an installed usage pattern.

Dynamic current: request events, traces and sampling details

Dynamic current records what happens while the lock changes state. The buyer should receive a dynamic current waveform for each agreed event, with enough context to distinguish normal operation from a stalled mechanism, abnormal load or repeated cycling.

Ask whether the captured scope includes:

  • Wake-up and control-PCB activity
  • RFID, keypad, fingerprint or other credential-validation activity
  • Motor and gearbox operation while driving the latch, bolt or deadbolt
  • Relock, settling and low-battery behaviour
  • Wireless-module activity, where fitted
  • Behaviour during an external emergency-power event, where fitted

These are scope questions rather than assumptions about every lock. Different configurations contain different components, and some functions may be absent. The supplier should identify what was present and what was excluded.

For each event, request a motor current trace or equivalent measurement with the event start and end identified. Also request the sampling rate, measurement bandwidth, probe or shunt arrangement, and the method used to select peak, average and duration values. A peak without its sampling context is not a complete dynamic result.

The Static and Dynamic Current Failure Modes Seen on Smart Lock Projects explains why the captured event matters. A waveform becomes useful when it can be connected to a defined operation rather than presented as an unexplained spike.

Build a test evidence package that identifies the lock

Ask for a test evidence package with one traceable identity. Label the supplier folder and the request with static-and-dynamic-current so later revisions can be found without relying on an email subject line.

The package should contain:

  1. SKU, lock-body revision, finish option and tested sample identifier
  2. Firmware and configuration details that affect electronic behaviour
  3. Description of the battery or laboratory power source and its condition
  4. Diagram or written definition of every measured operating event
  5. Instrument configuration, sampling details and setup photographs
  6. Raw static readings, dynamic waveforms and supporting calculation files
  7. Acceptance limits tied to a drawing, requirement or engineering rationale
  8. Deviations, anomalies, excluded events and the supplier’s conclusions
  9. Date of testing and identification of the person or team responsible
  10. A change-control statement explaining which modifications invalidate the evidence

Ask whether unavailable files can be reviewed under controlled access. If the supplier cannot release them, request a written summary that identifies the missing observations and limits the permitted conclusions. Silence should not be interpreted as agreement that the trace was reviewed.

Compare evidence quality before comparing lock designs

Static and dynamic current test evidence is strongest when a reviewer can reproduce the interpretation. Use the same questions for every candidate, then score the evidence rather than the supplier relationship.

CriterionReview questionIllustrative weightLow scoreHigh score
Scenario definitionAre all measured states and events unambiguous?20%Labels onlyDetailed, reproducible procedure
Configuration traceabilityCan each result be tied to the proposed SKU and revision?20%Generic model familyExact sample and configuration
Static measurementAre source, duration, averaging and uncertainty stated?15%Bare current valueComplete setup and result
Dynamic measurementAre traces, sampling settings and event boundaries retained?20%Selected peaks onlyRaw waveform with context
Acceptance criteriaIs the pass condition visible and linked to a requirement?15%Supplier preferenceApproved drawing or criterion
Change controlAre invalidating modifications and rerun triggers defined?10%Not addressedExplicit revision rules

Change the weights to match the project, but keep the scoring separate from product preference. A well-documented evidence package does not prove that one lock is mechanically better, and a premium data sheet does not remove the need for traceability.

Current evidence cannot answer every mechanical qualification question. Use an Office Smart Lock Site Survey or Smart Lock Retrofit Site Survey to establish the installed doors, while Static and Dynamic Current and Door Compatibility: The Fit Envelope addresses how electrical evidence should not be treated as a door-fit result. The broader relationship between measurements and field outcomes is covered in How Static and Dynamic Current Drives Smart Lock Reliability.

RFQ evidence checklist a supplier can complete

The following RFQ evidence checklist can be attached directly to a qualification request. It asks for evidence without prescribing a result the supplier has not yet established.

Please provide a static and dynamic current evidence package for the proposed smart lock configuration, with the tested sample identified by SKU and revision. Separate static-state measurements from dynamic-event waveforms. Include operating definitions, power-source conditions, instrument and sampling settings, raw files, calculation methods, acceptance criteria, deviations and change-control rules.

Ask the supplier to:

  • Mark each measured state on a configuration or wiring diagram
  • State which lock-body, motor, gearbox and control-board revisions were fitted
  • Identify the battery type, cell arrangement or laboratory-source condition used
  • Provide both a static current test report and the associated raw readings
  • Provide a dynamic current waveform for each agreed operating event
  • Explain how peak values were selected from the recorded data
  • List anomalies that occurred but were excluded from the conclusion
  • Identify any event that could not be captured with the selected setup
  • Confirm which file formats can be supplied with the quotation package
  • State what change to hardware, firmware or test method requires a repeat test

Request the evidence package at the same time as the initial configuration review. Waiting until a pilot is underway can leave the buyer with measurements that cannot be tied to the approved lock.

Read the results without turning measurements into promises

A trace supports bounded conclusions. It may show the current recorded in a stated state, the peak and duration observed during a defined event, or the relationship between a result and an agreed acceptance limit. It does not automatically prove battery endurance, cycle life, field reliability, network performance or suitability for every door.

Keep three evidence questions separate:

  1. What was measured?
  2. Under which conditions was it measured?
  3. Which decision does the measurement support?

The dynamic current waveform can reveal where an event becomes abnormal, but an unusual value is not automatically a failure. The supplier should point to the criterion used to distinguish acceptable from unacceptable behaviour. If no criterion exists, request an engineering review before approving the configuration.

Static and Dynamic Current in a Smart Lock: What a Buyer Should Understand provides a useful foundation for separating a measurement from the conclusions often attached to it.

CONFIRM-WITH-LOCAL-ENGINEER: Confirm project-specific electrical, safety, access-control and local-authority requirements with qualified local professionals for the installed design and SKU.

Approval workflow and change control

Use the evidence package as a gate rather than as a document attached after approval. The workflow below keeps measurement, review and revision control together.

flowchart TD
  A[Agree operating scenario] --> B[Issue evidence request]
  B --> C[Static capture]
  B --> D[Dynamic capture]
  C --> E[Check setup and limits]
  D --> E
  E --> F[Review raw traces]
  F --> G[Approve revision and conditions]
  G --> H[Record change triggers]

Record the approved SKU, sample, configuration, evidence date and permitted conclusions. Define change triggers before approval. Changes to the motor, gearbox, lock body, control PCB, battery arrangement, relevant firmware behaviour or measurement method may require new evidence. A revised quotation should not silently inherit approval from a mechanically or electronically different sample.

Submit the evidence with the lock inquiry

A complete qualification package should let a reviewer trace the proposed lock to the requested measurements without asking for missing context. Include the evidence request, the agreed operating states, any survey information and the exact proposed configuration in the same supplier review.

The same question is worked through in more detail in smart locks for large office buildings. That is the same question static and dynamic current test evidence has to answer here.When the technical package is ready, include it with a request for quote, and ask the supplier to identify any current or power data that cannot be provided for the proposed revision. A documented gap is safer than an unsupported number and gives both teams a clear qualification item to resolve.

Váš košík
Vaše zkušenost s tímto webem se zlepší povolením souborů cookie. Zásady cookies
Chat on WhatsApp