En 14637 versus as nzs 4145 2 applicability: learn which standard applies to your smart lock door, what EN 14637 and AS/NZS 4145.2 test, and which evidence.

Zveřejněno v:: čvc 22, 2026

EN 14637 Versus As/Nzs 4145.2: Which One Applies to Your Smart Lock Door

EN 14637 Versus As/Nzs 4145.2: Which One Applies to Your Smart Lock Door

For en 14637 versus as nzs 4145 2 applicability, the decisive fact is what the lock does for the door, not how connected it is. A battery smart lock fitted to an ordinary pedestrian door does not enter the EN 14637 branch merely because it controls a latch electronically. The reverse is equally important: if a controlled hold-open arrangement serves a fire or smoke door assembly, the procurement file may need assembly-level evidence even when the lock is only one component of a larger system.

Direct answer. In short, en 14637 versus as nzs 4145 2 applicability is the subject of this piece. en 14637 versus as nzs 4145 2 applicability is where the work on en 14637 versus as nzs 4145 2 applicability sits. en-14637 is what has to be evidenced before anyone signs. an en 14637 versus as nzs 4145 2 applicability turns conformity language into requests a buyer can send. en 14637 versus as nzs 4145 2 applicability is where those en 14637 versus as nzs 4145 2 applicability requests get written down.

Use two yes-or-no questions. First, is the device part of an electrically controlled hold-open arrangement for a fire or smoke door assembly? Second, is the proposed requirement about the security properties of a lock for an external pedestrian door? Record each answer before comparing suppliers. That is the basis of this en 14637 versus as nzs 4145 2 applicability decision tree.

1. Classify the Door Before the Product

The decision tree should begin with the door because a product description cannot reveal the applicable test scope. A smart lock may appear in four different procurement files: a mechanical or electromechanical lock-performance file, a fire-door assembly file, a lock-security file for an external pedestrian door, and a separate radio, EMC, or electrical-safety file. Asking one standard to answer all four questions produces contradictory evidence. The range this procurement eventually buys from is the smart door locks.

Classify the requirement using this sequence:

  • Controlled hold-open: The device releases or maintains a fire or smoke door under a defined arrangement.
  • External pedestrian security: The requirement addresses lock security on an entrance door exposed to attack from outside.
  • Ordinary lock operation: The requirement addresses mechanical and electromechanical locking, durability, cylinders, or multipoint operation.
  • Electronics and communications: The requirement addresses radio emissions, immunity, mains-powered equipment, batteries, or environmental performance.

Before choosing a standard, complete the physical door survey. The Office Smart Lock Site Survey provides a useful project checklist for separating door function, frame condition, access-control needs, and outstanding site information.

2. Follow the EN 14637 Branch

EN 14637 scope is electrically controlled hold-open systems for fire and smoke door assemblies. It addresses requirements, tests, application, maintenance, the interface with fire detection or alarm arrangements, and expectations associated with mains-powered systems. Battery-only systems are explicitly outside its scope statement.

This makes EN 14637 an assembly and control-system branch, not a general security-performance branch for smart locks. The lock does not acquire an EN 14637 qualification simply because it can be operated electronically. The procurement question is whether the proposed device forms part of a controlled hold-open system subject to the current edition of the standard.

Fire-door evidence must also respect the assembly boundary. EN 1634-1 addresses fire-resistance testing of door and shutter assemblies, with hardware evaluated as part of that assembly. The evidence request should therefore identify the complete door, frame, hardware, closing arrangement, and any connected control equipment rather than treating the lock as a separately assessed fire door.

For a clause-level breakdown, use the EN 14637 for Smart Locks: Scope, Tests and What the Standard Never Proves, then route each requirement to the current published standard text.

CONFIRM-WITH-LOCAL-FIRE-DOOR-APPROVER: Confirm the applicable edition of EN 14637, the role of the hold-open system, and which authority or project approver signs off for the complete fire or smoke door assembly.

3. Follow the AS/NZS 4145.2 Branch

The AS/NZS 4145.2 scope is best treated as a working procurement branch for the security properties of locks used on external pedestrian doors. Before citing the designation, check its published title, scope, and numbering against the current standard because the available reference material flags the numbering as requiring verification.

This branch can lead procurement toward the mechanical security questions associated with external pedestrian door locks: attack resistance, lock construction, operating performance, and other requirements contained in the verified standard text. It does not answer whether the lock contains a radio, how its electronics behave under interference, or whether a door assembly can be held open under a fire-alarm arrangement.

For an Australian or New Zealand project, keep this requirement separate from an EN 14637 hold-open requirement. One may concern lock security while the other concerns a controlled hold-open system. A supplier may need to satisfy both sets of questions, but one report or certificate should not be presented as evidence for both unless its stated scope genuinely covers both.

CONFIRM-WITH-LOCAL-AU-NZ-SPECIFIER: Check the published title, scope, and designation numbering of AS/NZS 4145.2, and confirm the current edition before including it in an RFQ, specification, or tender.

4. Handle Doors That Trigger Both Branches

A commercial entrance may combine an externally accessible door with a controlled hold-open arrangement used elsewhere in the building. In that case, create two requirement lines rather than one combined compliance line:

  1. Identify the lock-security requirement applicable to the external pedestrian door.
  2. Identify the hold-open requirement applicable to the fire or smoke door assembly.

Each line needs its own standard edition, scope statement, evidence document, and responsible approver. This avoids allowing an assembly-level hold-open report to appear to establish lock security, or allowing lock-security evidence to appear to establish fire-door performance.

The practical output of a smart lock standards comparison is therefore not a winner between the standards. It is a documented mapping between door function, requirement, test scope, and evidence.

5. Route Ordinary Smart Locks Elsewhere

If the door is neither a controlled hold-open installation nor subject to an external pedestrian lock-security requirement, neither EN 14637 nor the AS/NZS 4145.2 branch is automatically appropriate. The smart lock may instead sit under EN 14846 for electromechanically operated locks and striking plates, EN 12209 for mechanically operated locks and latches, or EN 1303 where the cylinder itself is the subject.

Electromechanical locking, radio behaviour, EMC, electrical safety, battery transport, ingress protection, and mechanical impact are separate scopes. Evidence for one does not establish another. A battery lock and a mains-powered gateway may also fall under different destination-market regimes. Route each question to the relevant current standard or conformity route and identify the exact product variant to which each document applies.

Where an existing door is involved, document the frame, keep the existing lock, and add electronics before selecting a requirement. The EN 14637 When Retrofitting Smart Locks Onto Existing Doors explains why a retrofit can change the assembly and evidence questions without changing the product description.

CONFIRM-WITH-LOCAL-MARKET-APPROVER: Confirm which destination-market radio, EMC, electrical-safety, and product-conformity regimes apply to the exact lock and any supplied accessories.

6. Follow the Decision Tree Mechanically

flowchart TD
    A[Record the door function] --> B{Controlled hold open on a fire or smoke door}
    B -->|Yes| C[EN 14637 branch]
    B -->|No| D{External pedestrian door with a lock security focus}
    D -->|Yes| E[AS NZ 4145.2 branch]
    D -->|No| F[Lock hardware and electronics branches]
    C --> G[Identify the evidence document]
    E --> G
    F --> G
    G --> H[Match the scope to the exact SKU and project]

The final step is mandatory. A relevant document is not enough if its scope excludes the purchased lock, the configured system, or the intended door application. Retain en-14637 as the internal requirement reference, not as evidence of conformity.

7. Compare the Branches Without Merging Their Scopes

Door or requirementPrimary decisionEN 14637 questionAS/NZS 4145.2 questionEvidence route
Fire or smoke door with controlled hold-openIs hold-open the device’s assigned function?Does the proposed system fall within the current hold-open scope?Normally not the controlling branchAssembly requirements, test report, certificate, and project approval evidence
External pedestrian entranceIs lock security the stated procurement need?Not unless a controlled hold-open function is also presentDoes the verified standard cover the lock and security properties being specified?Security test evidence for the exact lock and variant
Ordinary pedestrian smart lockIs the requirement locking performance rather than hold-open or external security?Normally outside this branchCheck the verified scope before relying on itEN 14846, EN 12209, EN 1303, or another verified route as applicable
Radio, EMC, or mains-powered accessoryIs the file asking an electronics or market-access question?Outside the branchOutside the branchProduct-specific technical reports and destination-market evidence

Use the table to assign an owner to each requirement. If one supplier document contains several test sections, check whether those sections can be extracted into a traceable requirement matrix rather than accepting the document as one undifferentiated claim.

8. Demand Evidence at the Right Rung

For en 14637 versus as nzs 4145 2 applicability, the evidence-strength order runs: marketing image → declaration of conformity → test report on a sample → scoped third-party certificate → certificate covering the exact SKU/variant ordered → production-control records that hold the approval open after the sample passed.

The rungs that decide en 14637 versus as nzs 4145 2 applicability are the ones issued under en 14637; a file for a different scheme does not move the position on this ladder.

The commercial risk is purchasing at rung two or three and discovering at installation that there is no rung-five evidence. A supplier’s brand name, a product-page badge, or an unsigned PDF does not establish that the purchased configuration was within the tested sample.

For every claimed result, request the report name, issue date, laboratory or issuing body, document number, tested model, tested variant, and stated scope. For a certificate, also check its holder, covered products, validity, and any conditions. For production continuity, request the evidence that links the qualified sample to current production.

The Reading an EN 14637 Test Report Page by Page: A Smart Lock Buyer Walkthrough provides the practical document-reading sequence.

9. Separate the Four Evidence Documents

DocumentWhat it establishesBuyer checkWhat it does not replace
Test reportA sample was tested under stated conditionsModel, variant, date, laboratory, methods, results, and report numberA certificate covering current production
CertificateA body attests conformity within a defined scopeVerifiable number, holder, scope, validity, conditions, and covered variantThe full test report or production-control evidence
Declaration of conformityThe manufacturer or importer makes its own legal claimSignature, date, responsible party, product identification, and referenced evidenceA third-party certificate
MarkingA mark appears on the product or labelExact mark, label location, model linkage, and supporting documentationThe underlying test report or certificate

When a supplier says a product has CE, UKCA, RCM, KC, or G-Mark, ask which of these four documents is meant. The wording is not evidence anatomy. Certification status is CONFIRM-PER-SUPPLIER and must be supported by a named test report, an issued certificate with a verifiable number, or a signed and dated declaration, as applicable.

A standard describes what it tests; it does not certify a site, an installed door, or a supplier’s entire product range. The standard’s scope, the supplier’s evidence, and the project approval remain separate decisions.

CONFIRM-WITH-LOCAL-CONFORMITY-APPROVER: Confirm the evidence holder, issuing body, scope, validity, and exact SKU coverage required by the destination market or project approver.

10. Turn the Branch into an RFQ Checklist

Send the supplier one evidence index aligned to the branches selected in the decision record:

  • Describe the door type, frame, lock, hold-open arrangement, and intended operating environment.
  • State the current edition of every standard cited and the clause or test requirement being relied upon.
  • Identify the exact SKU, finish, electronics configuration, cylinder, and accessories included in the offer.
  • Name each test report, certificate, declaration, and marking supplied, with document numbers and dates.
  • State the scope of each document, including the model and variant actually covered.
  • Explain how the sample evidence remains connected to the production configuration being supplied.
  • Identify any field, installation, maintenance, or door-integrity conditions attached to the result.
  • Request written clarification wherever the product page, test report, and project requirement use different terminology.

For hold-open projects, the Buying Against the Hold-Open on a Fire Door: RFQ Clause Language that Survives Comparison supplies operationally focused clause language. For access-control work, the Smart Lock Retrofit Site Survey helps capture the site information needed before standards are selected.

Readers comparing approaches usually start with the smart lock odm price. That is the same question en 14637 versus as nzs 4145 2 applicability has to answer here.

11. Close Qualification with a Decision Record

For en 14637 versus as nzs 4145 2 applicability, the qualification record should show the door decision, selected branch, current standard edition, exact scope, evidence document, SKU coverage, and unresolved approval question. If the EN 14637 branch applies, record the hold-open system and complete door assembly. If the AS/NZS 4145.2 branch applies, record the verified designation and the external lock-security requirement. If neither applies, name the verified lock-performance or market-access route that replaces them.

This record lets a procurement manager evaluate quotations against the same question, reject evidence that answers a different scope, and release an RFQ without treating a smart lock’s connectivity as proof of its door-hardware or fire-door suitability.

Close the loop with requesting a quote.

Váš košík
Vaše zkušenost s tímto webem se zlepší povolením souborů cookie. Zásady cookies
Chat on WhatsApp