As/nzs 4145.2 for Smart Locks: Scope, Tests and What the Standard Never Proves
Procurement teams often ask whether a smart lock can be bought against AS/NZS 4145.2. The defensible answer starts with the reference, not the product badge. The as nzs 4145 2 smart lock scope limits are a scope-checking exercise: what does the current published standard test, and which evidence supports the claim? AS/NZS 4145.2 is normally described as setting security properties of locks for external pedestrian doors in Australia and New Zealand, often as a specifier or insurer reference. That scope does not automatically answer radio, EMC, fire-door, egress or mains-powered accessory questions. This tearoff helps a Procurement Manager record the application, demand the right evidence and separate scope from marketing language.
Direct answer. To put it plainly: as nzs 4145 2 smart lock scope limits has to hold for as nzs 4145 2 smart lock scope limits. as-nzs-4145-2 has to hold at the same time. The sections below describe the order as nzs 4145 2 smart lock scope limits is settled in. An as nzs 4145 2 smart lock scope limits works as a two-column evidence test. as nzs 4145 2 smart lock scope limits names the documents. Each column of as nzs 4145 2 smart lock scope limits closes with a paper.
as nzs 4145 2 smart lock scope limits is used here in the sense given under as nzs 4145 2 smart lock scope limits. It is a working definition of as nzs 4145 2 smart lock scope limits that carries no regulatory weight. The buyer still has to check it against the dated product page.
- What the seller can produce — supplier declarations and drawings for as nzs 4145 2 smart lock scope limits
- What only an issuer can verify — third-party certificates covering the exact scope of as-nzs-4145-2
- What to request — the document set that matches the SKU behind as nzs 4145 2 smart lock scope limits
- This is the sequence as nzs 4145 2 smart lock scope limits has to follow, anchored on as nzs 4145 2.
Fill the purchase header before reading claims
Create one header for every quoted lock variant. Leave a field blank rather than infer it.
- Application: external pedestrian door, exact opening and the proposed locking arrangement.
- Market: destination country and whether the quotation is for australia, new-zealand or both.
- Product identity: model, lock body, cylinder, bolt, faceplate, power architecture and radio configuration.
- Claim requested: AS/NZS 4145.2 lock security evidence, separate radio/EMC evidence, or both.
- Supplier wording: the exact sentence used, including any edition, report, certificate or logo.
- File reference:
as-nzs-4145-2, recorded beside the supplier’s exact designation.
The header is also the audit trail. For any SKU-specific dimension, electrical feature or performance statement, confirm on the dated product page for the specific SKU. Use the Writing the Australian and New Zealand Lock Security Specification Into a Smart Lock RFQ: Clause Language that Gets Real Answers when converting the header into RFQ clauses. Specifications at this level come off the smart door locks.
CONFIRM-WITH-LOCAL-STANDARD-BODY: Verify the published title, scope, numbering and current edition for the exact application before using AS/NZS 4145.2 in an RFQ.
Read the designation as a narrow scope statement
The designation is normally associated with the security properties of locks for external pedestrian doors. Treat that as a starting description, not a summary of every clause. Ask which security properties are covered, what specimen and installation are used, and what remains outside scope. Obtain the table of test-method references from the current published standard text rather than accepting a general statement that the product was “security tested.”
| Scope question | Evidence to record | Stop signal |
|---|---|---|
| Is this an external pedestrian-door lock? | Product description and drawing | The quotation treats it as a general access-control device |
| Which security properties are assessed? | Current-edition scope and test-method references | “AS/NZS tested” with no method or clause |
| Which physical sample was used? | Report identity and specimen description | A generic model brochure |
| Which items remain outside scope? | Published scope and supplier response | Electronics or radio treated as covered by implication |
Use a boundary sentence: “The requested evidence addresses the stated lock-security scope for the specified application.” Do not turn product evidence into market approval or site approval.
Put performance, fire, radio and safety in separate lanes
A smart lock can generate several evidence requests at once. Keeping them in separate lanes prevents one impressive report from carrying an unrelated claim.
| Evidence lane | Question answered | Question left unanswered |
|---|---|---|
| AS/NZS 4145.2 | Security properties for locks for external pedestrian doors | Electronics and adjacent market-access regimes |
| EN 14846 | Electromechanically operated locks and striking plates | Radio/EMC, fire resistance and escape-device logic |
| EN 1634-1 | Fire resistance of a door-and-shutter assembly | A standalone fire certificate for a lock |
| RCM radio compliance | EMC, radiocommunication and telecom obligations for an applicable product | State-based electrical-safety approval for a mains-connected charger |
For a battery-driven smart lock’s mechanical-electrical locking function, EN 14846 is the closer fit than the mechanically operated-lock family; it still does not answer radio or fire questions.
CONFIRM-WITH-LOCAL-AUTHORITY: Confirm the destination-market route and which Australian or New Zealand requirements apply to the specific lock, radio module and any mains-powered accessory before purchase.
flowchart TD
A[Define the lock application] --> B[Check the published scope]
B --> C[Request the named test report]
C --> D{Identify the document}
D -->|Test report| E[Record sample and method]
D -->|Certificate| F[Check scope number and validity]
D -->|Declaration| G[Check issuer signature and date]
D -->|Marking| H[Inspect the product label]
E --> I[Match the exact SKU]
F --> I
G --> I
H --> I
I --> J[Approve only the documented claim]
Pull the test report, not the cover image
A test report records that someone tested a sample. For AS/NZS 4145.2 lock security evidence, request the complete report rather than a cropped certificate or marketing image. Record its number, date, issuing laboratory, applicant, sample identity, standard edition, test-method references, results and deviations. Record the door, frame, fixing and operating configuration used for the specimen. For as nzs 4145 2 smart lock scope limits, the position on this ladder is what the purchase decision turns on.
Check whether the report identifies the same lock body and variant being purchased. If it does not, label it as sample evidence and do not extend its result to production units or another finish, cylinder or electronic configuration. The Reading an As/Nzs 4145.2 Test Report Page by Page: A Smart Lock Buyer Walkthrough provides the page-level reading method.
Name the document that carries the claim
Smart lock conformity documents are routinely confused. Use this test report versus certificate distinction before deciding whether the evidence is strong enough.
| Document | What it is | Minimum record | What it does not establish by itself |
|---|---|---|---|
| Test report | Evidence that a sample was tested | Report number, date, sample and results | Production conformity or every variant |
| Certificate | A body’s attestation of conformity | Scope, number, issuer and validity | Coverage beyond its stated scope |
| Declaration of conformity | The manufacturer or importer’s own legal claim | Entity, signature, date and product identity | Independent testing |
| Marking | A mark printed on a product or label | Exact label image and supporting file | Test-report or certificate details |
A supplier saying it has “CE” may be pointing to any one of these. Ask which one, then inspect the underlying file. Certification status follows the CONFIRM-PER-SUPPLIER route: a named test report, an issued certificate with a verifiable number, or a signed and dated declaration. A marking alone is not a substitute.
CONFIRM-WITH-LOCAL-AUTHORITY: Confirm which entity may issue the declaration for the destination market and the signature, date and product identification it must contain.
CONFIRM-PER-SUPPLIER: Certification status must be supported by a named test report, an issued certificate with a verifiable number, or a signed and dated declaration.
Mark the smart-lock boundary before approval
Ask what each requested claim needs. AS/NZS 4145.2 evidence may address the lock-security lane, but it cannot by itself settle radio behaviour, EMC, credential handling, event-data controls, fire resistance, escape logic or charger safety. Those items need their own applicable requirements and evidence.
Do not turn a missing answer into a negative product claim. Log “evidence required” beside each uncovered item. Show which standard answered each line rather than listing unrelated reports as one approval.
Bind the evidence to the purchasable object
Evidence can be valid for a sample yet miss the product on the order. Match these fields before signature:
- Exact model and commercial variant.
- Lock body, cylinder, bolt and faceplate configuration.
- Power source and any separate gateway or charging accessory.
- Door and frame details relevant to installation.
- Report, certificate and declaration numbers.
- Certificate scope, issue date, expiry or validity statement.
- Evidence of production control or changes since the sample test.
If any field is absent, issue a clarification rather than making the supplier’s word do the work. The Office Smart Lock Site Survey can capture physical-door assumptions, while the Smart Lock Retrofit Site Survey can expose gaps between an installed door and the tested description.
Move up the evidence-quality ladder as nzs 4145 2
Keep the as nzs 4145 2 smart lock scope limits visible beside this ladder:
Where as nzs 4145 2 smart lock scope limits is qualified, the practical acceptance order runs: marketing image → self-declared DoC → sample test report → certificate with scope and certificate number → certificate naming the exact SKU/variant on the order → ongoing production-control evidence that survives the sample test
The rungs that decide as nzs 4145 2 smart lock scope limits are the ones issued under as nzs 4145 2; a file for a different scheme does not move the position on this ladder.
The commercial failure is purchasing at rung two or three and discovering at installation that no rung-five evidence exists. Set the required rung in the RFQ and make the response conditional on that evidence. A stronger promise in a quotation is not proof that the document exists.
For tender work, the As/nzs 4145.2 in a Smart Lock Tender Pack: The Evidence Checklist can convert the ladder into attachment names and review fields. Specify whether the buyer requires a signed manufacturer or importer declaration or an independent body’s certificate.
Use this approval comparison
| Gate | Pass signal | Hold or reject reason |
|---|---|---|
| Scope | Published scope matches the stated door application | Standard is used to imply electronics approval |
| Report | Numbered report identifies sample, methods and results | Only a cropped image is supplied |
| Certificate | Scope and number are verifiable | Certificate names another product |
| Declaration | Responsible entity, signature, date and SKU are present | An unsigned declaration is treated as issued evidence |
| Identity | Evidence maps to the ordered variant | Sample-to-order gap is unrecorded |
| Continuity | Production-control evidence explains ongoing validity | No bridge from sample to production |
Use a three-way decision. “Approve” means the documented claim matches the purchase. “Hold” means a named clarification or file is outstanding. “Reject” means the supplier substituted a mark, organisational certificate or unrelated report for the required evidence.
Sign off the evidence, then release the RFQ
Attach the current-edition scope reference, test report, any certificate, declaration of conformity, marking image and exact-SKU comparison. State the conclusion narrowly: “The supplied evidence addresses the identified lock-security scope and documented variant.” Leave every adjacent smart-lock requirement in its own evidence lane.
Readers comparing approaches usually start with the smart lock firmware security. That is the same question as nzs 4145 2 smart lock scope limits has to answer here.The As/nzs 4145.2 Versus ISO 9001: Which One Applies to Your Smart Lock Door is the boundary reminder: an ISO 9001 or ISO 14001 certificate describes an organisation’s management system, not conformity of the particular lock. Send the completed tearoff with the RFQ so suppliers answer the same question in the same format.
CONFIRM-WITH-LOCAL-AUTHORITY: Reconfirm the current published scope, evidence validity and destination-market requirements at purchase and installation; record the authority or specialist consulted, the date and the resulting decision.
Ask for the offer against the same requirement: request a quote.

