Decommissioning and Rekeying: Recording the Case Before It Is Gone
A smart-lock transition can look complete at the door while the evidence needed to show what changed has already disappeared. The disciplined answer is one case record joining the pre-change state, de-issuance action, rekey action, and post-change check. This is decommissioning and rekeying measurement: not a score assigned to a vendor, but a way to show what changed and who controlled it while keeping unresolved items visible. The file should become the decommissioning and rekeying record used at handover, the credential revocation record used for reconciliation, and the retained source of decommissioning evidence. The comparison below tests four ways to capture that case and identifies the rekeying handover record and door transition evidence each method preserves.
Direct answer. In short, decommissioning and rekeying measurement is the subject of this piece. decommissioning and rekeying measurement is where the work on decommissioning and rekeying measurement sits. decommissioning-and-rekeying is what has to be evidenced before anyone signs. A decommissioning and rekeying measurement sets out the maintenance record for a system in service. decommissioning and rekeying measurement carries the early-warning signal for decommissioning and rekeying measurement.
decommissioning and rekeying measurement means here what decommissioning and rekeying measurement sets out. It is a working definition of decommissioning and rekeying measurement for this market and product. It is drawn from the evidence below, and it is not a general marketing phrase.
- Set the period — define how often decommissioning and rekeying measurement is inspected
- Set the alarm point — name the condition that forces a change to decommissioning-and-rekeying
- Record the measure — keep one metric that shows four ways is healthy
- decommissioning and rekeying measurement runs this sequence, and decommissioning and rekeying is the record it produces.
The case that disappears when a door is handed back
Decommissioning removes an old access path, while rekeying creates a controlled replacement. Neither event is self-evidencing: a released door may later need proof of the credential state and physical action, together with the observed result. The case therefore starts before either action and ends only after the approved handover checks are recorded.
Use decommissioning-and-rekeying as the case-type label, but identify the object by its door or unit number from the asset schedule. A room name can be reused; a scheduled asset gives every observation a stable home. Keep requested, work-started, de-issuance-completed, rekey-completed, and handover-accepted events distinct. If one case contains several attempts, preserve them as separate events rather than rewriting the final state. A published treatment of the same step is Smart Lock Lock Case Measurement. Specifications at this level come off the smart door locks.
The chronology also protects retesting. A later visit that repeats a failed check should reference the earlier case rather than create a fresh success record. That preserves the difference between first attempt, retest, and accepted result without turning the record into an unsupported service-performance claim.
Four ways to build a decommissioning and rekeying measurement
Put four record types into the arena. Each can support closure, but each answers a different question and leaves a different blind spot.
| Record type | Evidence preserved | Decision it supports | Blind spot |
|---|---|---|---|
| Closure checklist | Sign-off and completion status | May the task be released? | Sequence and physical outcome |
| Exception report | Deviations, blockers, and escalations | Does the case need intervention? | Normal actions become invisible |
| Event chronology | Ordered actions, actors, and times | What happened, and in what order? | It may not prove the observed result |
| Paired evidence file | Before, action, after, and retained exhibits | Can the handover be reconstructed? | More disciplined administration is required |
None wins alone. A checklist is efficient but collapses the case into a yes or no. An exception report is useful for triage but cannot prove that ordinary steps happened. A chronology reconstructs order but may still omit the door condition. The paired evidence file is the strongest reconstruction record, yet it remains weak if the after-state was never captured.
The practical choice is a layered record: status for release, chronology for sequence, exceptions for intervention, and paired evidence for proof. Ask which layer each team will actually complete before approving the template.
Fix the unit, cohort, and clock first
Measure one door transition at a time. The unit is the door or lock identifier in the object schedule. The cohort is the set of decommissioning and rekeying cases selected by a stated business rule and status at a cut-off. Do not mix fault cases, planned replacements, and access-only rekeys unless the report labels each stream.
Use two clocks without inventing a target: when the change was requested and when the door became operable and handed over. Intermediate events explain the interval but do not replace its endpoints. Keep request time, work start, de-issuance, rekey, test, and acceptance as separate fields so the buyer can compute whatever internal measure it chooses. A completion stamp in a contractor system is not the same event as occupant handover.
The cohort definition matters when a case crosses reporting periods. State whether an open case is counted by request date, work date, or closure date, and keep that rule in the report. Distinguish a completed de-issuance from a completed rekey if one part remains open, so a mixed status cannot look more settled than the underlying population.
Build one case from six evidence stages
A complete case follows the same order every time. The table below is a field template, not a product specification; adapt access, key, and hardware entries to the approved operating procedure.
| Stage | Required entry | Evidence to retain |
|---|---|---|
| Intake | Door or unit ID; requested change; named owner | Request reference; object schedule entry |
| Identity | Model and variant read from label or catalogue row | Label image; dated product-page reference |
| Pre-change | Credential state; physical configuration; known exception | Export or reading; relevant photo |
| Action | De-issuance and rekey events with operator and time | Audit entry; work order; part or unit ID |
| Post-change | Approved access and door-operability checks | Test result; reading; photo |
| Closure | Handover recipient; unresolved item; retained evidence | Signed acceptance; case index |
When model or capability information affects the decision, confirm on the dated product page for the specific SKU. If hardware is replaced, record what was fitted, what was removed, and where the old unit was retained under the buyer’s procedure. The same case should hold both the credential revocation record and the mechanical rekey evidence; neither substitutes for the other.
Keep credential and mechanical outcomes separate
One door can pass the access test while its mechanical operation still needs correction, or pass the mechanical test while a former credential remains valid. Record these as separate observations. The credential revocation record should identify the credential population or class affected, its state before and after the action, the event time, the operator, and any exception. Use the access owner’s data-handling rules when saving identifiers or exports.
CONFIRM-WITH-LOCAL-ACCESS-OWNER: Confirm the de-issuance, record-retention, and data-handling requirements that apply to each site before collecting credential identifiers or exports.
The physical side should identify the rekey action performed, any part or unit involved, and the approved post-change test. Do not declare the transition complete because one credential failed, one key turned, or one screen displayed success. A failed check tells the team what remains unresolved; it does not describe the whole door.
Attach each observation to the object schedule and the event that produced it. If a result was entered later, separate when it was observed from when it was transcribed. That preserves reconstruction without treating every recorded timestamp as a physical visit time.
Make every check state what it ruled
An action list is not evidence until each check explains its result. Use the table to test the installed configuration under the approved method; do not assume a check or function is available on every model.
| Check | Record | What it rules out or leaves open |
|---|---|---|
| Door baseline | Mechanical operation and physical state before work | Separates a pre-existing condition from the change result |
| Old-access test | Approved test of former credential after de-issuance | Confirms one credential no longer grants access; does not prove every credential was revoked |
| New-access test | Approved test of newly issued credential | Confirms that credential path; does not prove mechanical condition |
| State reconciliation | Physical state against system record | Rules out a simple record mismatch; leaves deeper configuration questions |
| Physical result | Rekey action, part or unit, and operability evidence | Rules out an undocumented action when supported by the retained exhibit |
Order matters. Start with the baseline, record de-issuance, test the old and new access paths, reconcile state, and then record the physical result. If an exception appears, preserve the failed result rather than replacing it with a later passing observation. For the route to use when evidence conflicts, see Decommissioning and Rekeying: The Escalation Route and Its Deadlines.
Sequence the evidence before the window closes
A transition record has an evidence window. Capture the initial state, preserve each action, test the resulting state, and only then release the case. The exception branch remains open until the named owner accepts the corrective evidence.
flowchart TD
A[Open the transition case] --> B[Capture the before state]
B --> C[Record de-issuance and rekey actions]
C --> D[Capture the after state]
D --> E{Exception found}
E -->|No| F[Complete handover record]
E -->|Yes| G[Preserve evidence and escalate]
G --> F
Use this flow to decide what happens next, not to infer hardware capability. A failed branch may require access correction, mechanical correction, record reconciliation, or a supplier question. Which party must correct it belongs in the operating agreement. Align that duty with Decommissioning and Rekeying: Contract Clauses that Make It Work.
Compare record quality before comparing outcomes
A weak case can produce a favorable closure status because the template never asked for proof. Use a qualitative review across six dimensions.
| Dimension | Strong record | Weak record |
|---|---|---|
| Identity | Object, model or variant, and owner align | Room label only |
| Sequence | Actions and timestamps remain distinct | Final status overwrites history |
| Access | Before and after states reconcile | One success stands in for all credentials |
| Physical outcome | Approved test supports the result | Visual impression only |
| Exceptions | Failed tests and open items retained | Empty field used as evidence |
| Transfer | Another operator can locate every exhibit | Files depend on one person’s memory |
Review the dimensions together; a strong score in one does not repair a missing item elsewhere. The output is a case-quality decision, not a technician performance score. Keep the completed set and index in the format defined by Decommissioning and Rekeying Documentation Set.
Keep a case open when evidence conflicts
Close the case when the required evidence is present and the approved checks have recorded their outcomes. Do not close it when the old access path still works, the physical result differs from the request, the identity is uncertain, or an export and work record disagree. Those are exceptions, not clerical noise. Preserve the last valid state, state what remains open, name an owner, and attach the next evidence needed.
At a multi-site portfolio, keep the case standard constant while allowing local identifiers and operating sequences to differ. Select one control owner to decide whether a missing record blocks handover. That avoids two teams using the same green status for different evidential depth.
The practical counterpart to this point is the sl 6301 installation. That is the same question decommissioning and rekeying measurement has to answer here.
Make the handover decision explicit
The final handover record should answer four questions: which door changed, what the before-state was, which de-issuance and rekey actions occurred, and what evidence supports the resulting state and acceptance. The procurement evidence discussed in Decommissioning and Rekeying Evidence to Request Before You Buy should be requested before the case closes.
Readers comparing approaches usually start with sl 6301 for metal doors. That is the same question decommissioning and rekeying measurement has to answer here.Give the recipient a read-only index of retained exhibits rather than a folder of disconnected files. The index should point to the case identifier, event, and exhibit reference. If evidence sits in more than one system, record the authoritative copy and who controls updates.
CONFIRM-PER-SUPPLIER: Obtain written confirmation of each supplier’s role in de-issuance, rekey, and evidence export before assigning those steps in the plan.
Use the comparison to specify the template, approval rule, retention location, and escalation path before the first transition. Ask each bidder to state which events and exports it will provide, plus how it will handle an old credential or mechanical result that conflicts with the plan. The strongest handover is the one another operator can verify without oral explanation.
Ask for the offer against the same requirement: request a quote.

