Decoding ANSI/BHMA A156.31 Class and Grade Numbers for Door Hardware
Procurement teams often ask for an ansi bhma a156 31 smart lock class grade decode because a supplier quotation reduces qualification to a numeric label. That shortcut is unsafe. ANSI/BHMA A156.31 covers electric strikes and frame-mounted actuators; it is not a blanket designation for every electronic lock, reader, credential system, or complete door opening. A number becomes useful only after the component, edition, evidence document, and covered product have been identified.
Direct answer. For a smart-lock opening, separate the lock body from any electric strike or frame-mounted actuator. Ask which physical part the number applies to and which classification the supplier claims. “Grade 1” without a component, edition, and evidence trail is a label
Start with the designation, not the number The comparable
The commercial purpose of an ansi bhma a156 31 smart lock class grade decode is to identify the right evidence, not to rank products by a remembered numeral. ANSI/BHMA A156.31 covers electric strikes and frame-mounted actuators. Begin with the current edition standard scope: check the current edition of ANSI/BHMA A156.31 against the exact component in the opening schedule. Do not transfer a class or grade from a mortise lock, electromagnetic lock, closer, power supply, or complete access-control system. Every commercial claim here has to be checked against the smart door locks.
CONFIRM-WITH-LOCAL-AUTHORITY: Confirm the applicable edition, component scope, and any project acceptance requirement with the authority having jurisdiction and the project’s approved standards list.
The qualification path is: The second take on ansi bhma a156 31 smart lock class grade decode is Who Pays for ANSI/BHMA A156.31 Evidence in a Smart Lock OEM Programme. If the answer has to survive a supplier meeting, Ansi/bhma A156.31 in Nigeria and West Africa Purchasing Practice: What Buyers Are Asked to Produce is the next one to read.
flowchart TD
A[Receive numeric claim] --> B[Identify the exact component]
B --> C[Check current edition scope]
C --> D[Map class and grade definitions]
D --> E[Match the test sample to the SKU]
E --> F[Verify the evidence and its scope]
F --> G[Write an auditable specification]
Take the class and grade fields apart
The two numeric fields answer different questions. Use the class to locate the product category in the current edition, then use the grade to locate the performance classification attached to that category. Keep the cited edition attached to both. A number lifted from another ANSI/BHMA standard is not a decoded A156.31 claim.
| Claim token | Question the buyer must answer | Evidence to demand | Reject when |
|---|---|---|---|
| Class number | Which category in the current edition does the product occupy? | Published class definition and report scope | The supplier gives a number without its category |
| Grade number | Which performance classification applies to that class? | Current-edition mapping and supporting test evidence | The grade is borrowed from another standard |
| Model or SKU | Which physical variant was evaluated? | Exact model shown on the report or certificate | Only a family name is supplied |
| Evidence number | Which document can be traced? | Report, certificate, or signed and dated declaration | The number cannot be verified |
ANSI/BHMA A156.31 class and grade numbers must travel together: class selects the category in the cited edition; grade identifies the performance classification within that category. Do not build a universal crosswalk to A156.13, A156.23, A156.25, or another designation. A numeral is not meaningful until its source text and tested product are attached.
Match the class to the component being bought
Do not let the phrase smart lock collapse the scope check. The buyer must ask whether the proposed part is an electric strike, a frame-mounted actuator, an electromagnetic lock, an electrified locking device, or another component. Confirm the electric strike and frame-mounted actuator scope against the exact part in the opening schedule.
| Tender component | First scope question | Appropriate evidence path |
|---|---|---|
| Electric strike | Is the exact strike within A156.31 scope? | A156.31 report or certificate for the exact variant |
| Frame-mounted actuator | Are the actuator and frame configuration within scope? | A156.31 evidence plus a configuration match |
| Electromagnetic lock | Is holding-force and duty performance the issue? | Evidence under A156.23 |
| Electrified locking device | Is cycling, security, operation, strength, or environment the issue? | A156.25 may be the closer fit |
Those standards answer different questions. A156.23 addresses electromagnetic locks, including holding force, duty, and indoor or outdoor conditions. A156.25 addresses electrified locking devices, including cycling, security, operation, strength, and environmental testing when electrical function is not covered elsewhere. An integrated lock can contain several assessed parts, so require a claim-to-part map.
Separate the four evidence documents — smart lock class grade decode
A standard says what the standard tests. Ask the supplier to name the document type rather than pointing to a catalogue image.
| Document | What it records | Procurement use |
|---|---|---|
| Test report | A sample was tested against stated methods | Technical performance evidence |
| Certificate | A body attests conformity, with scope and validity | Verify certificate scope and validity, number, issuer, and covered variant |
| Declaration of conformity | The manufacturer or importer makes its conformity claim | Check the signature, date, and responsible party |
| Marking | CE, UKCA, RCM, KC, or G-Mark appears on the product or label | Identify the regime and evidence owner; do not substitute it for a report or certificate |
Use The evidence-quality ladder for ansi bhma a156 31 smart lock class grade decode runs: marketing image, self-declared DoC, test report on a sample, third-party certificate with scope and number, certificate covering the exact SKU or variant, then audit or production-control evidence that keeps coverage valid. Treat CONFIRM-PER-SUPPLIER verification as a request for the named document, its scope, issue date, and traceable number—not as an inference from a logo.
CONFIRM-PER-SUPPLIER: Obtain a named test report, an issued certificate with a verifiable number, or a signed and dated declaration for the exact SKU before treating certification status as established.
Match the number to the buying configuration
The decoded class and grade remain provisional until exact SKU test evidence ties them to the purchased item. Match the model, tested variant, application, and configuration differences disclosed by the supplier. If the sample differed, ask for the technical rationale and the applicable acceptance route before accepting the claim.
Keep site conditions outside the number itself. The Office Smart Lock Site Survey can record the opening, while this standard record should identify only what the evidence covers.
Convert the decode into a purchase clause
Use a clause that requires the supplier to state the component, cite the current edition, reproduce the class and grade definitions, identify the exact model or variant, and name the evidence document with its number and validity. A family-level statement, catalogue photograph, or unexplained grade number should not satisfy that clause.
Use Ansi/bhma A156.31 for Smart Locks: Scope, Tests and What the Standard Never Proves for the scope boundary, Reading an ANSI/BHMA A156.31 Test Report Page by Page: A Smart Lock Buyer Walkthrough to inspect the report, and Buying Against the Electric Strike: RFQ Clause Language that Survives Comparison to draft the RFQ wording.
Ready to qualify a lock-and-strike package? Send each supplier the same evidence request, collect the same fields, and build a like-for-like matrix before approval; a single numeral should never decide the award.
Close the loop with requesting a quote.

