Ansi/bhma A156.13 When Retrofitting Smart Locks Onto Existing Doors
The ansi bhma a156 13 smart lock retrofit impact describes a qualification question: can the offered smart lock be accepted on the existing door, and what evidence supports that configuration? ANSI/BHMA A156.13 is a performance standard for mortise locks, so it cannot by itself answer whether a proposed installation fits a particular opening. Procurement should separate mechanical fit, evidence scope and installed verification rather than treat the standard as a site certificate.
Clause C-01 — Set the standard boundary The next step
Direct answer.Clause text: “Use the current edition of ANSI/BHMA A156.13 to state the required mortise-lock performance evidence. Identify the exact door and ordered lock variant to which that evidence applies.”
The ANSI/BHMA A156.13 scope covers mortise-lock performance, not approval of a retrofit method. A standard describes what it tests; it never certifies an installed site. It cannot establish that a supplied body fits an existing preparation or that adjacent hardware remains acceptable. Treat fit, performance evidence and installation approval as separate decisions. Every commercial claim here has to be checked against the smart door locks.
CONFIRM-WITH-LOCAL-AUTHORITY: Confirm the edition and contractual standard language required for the project before issuing the RFQ.
Record key:ansi-bhma-a156-13
Clause C-02 — Capture the existing door
Clause text: “Attach a door-by-door record of the installed lock body, faceplate and strike, handing, door construction, trim and any obstructions. List every component proposed for removal or retention.”
During an existing door retrofit, photographs and a generic “mortise lock” label are not a fit statement. Use Smart Lock Retrofit Site Survey as the field record, then require the bidder to cite each survey reference. Where access or occupancy differs, use Office Smart Lock Site Survey rather than copying assumptions between door types.
| Survey finding | Bidder response required | Qualification treatment |
|---|---|---|
| Mortise body retained | Component retention map and fit statement | In-place retrofit candidate |
| Body replaced in existing preparation | Replacement drawing and work scope | Replacement within existing preparation |
| Lock interface must change | Revised door, frame and trim details | Conversion with site-specific review |
| Condition not recorded | Completed survey and bidder clarification | Hold classification |
Clause C-03 — Classify the work before pricing it
Require bidders to classify each opening as an in-place retrofit, a replacement within existing preparation, or a conversion that changes the lock interface. This mortise lock retrofit classification controls drawings, labor and the evidence request; it should not be left to an installer’s default method.
| Decision | Required bidder answer | Procurement consequence |
|---|---|---|
| In-place retrofit | Which installed components remain, and what written fit evidence covers them? | Preserve approved preparation and survey reference |
| Replacement in existing preparation | Which body and faceplate are changed, and how is coordination shown? | Price removal, replacement and installation work |
| Interface conversion | Which door, frame or trim interfaces change? | Treat as a site-specific design requiring separate approval |
A fit statement alone does not replace the performance evidence required for the offered configuration.
Clause C-04 — Demand evidence at the right level
Clause text: “For each offered variant, identify the test report, certificate, declaration of conformity or marking supplied, and state the scope, sample identifier, date and variant covered.”
A test report identifies tested samples. A certificate carries an attester’s scope and validity. A declaration of conformity is the manufacturer or importer’s own claim. Marking is a label, not the underlying evidence. Request a named, dated document traceable to the exact SKU or variant.
| Evidence item | What it establishes | Buyer request |
|---|---|---|
| Test report | Someone tested a sample | Identify the sample, tests and report number |
| Certificate | A body attests conformity within scope | Verify the number, scope, validity and variant coverage |
| Declaration of conformity | The manufacturer or importer makes its own claim | Obtain a signed and dated declaration |
| Marking | A mark appears on a product or label | Trace the mark to its underlying evidence |
CONFIRM-WITH-LOCAL-AUTHORITY: Confirm which declaration, marking or certificate form the jurisdiction and project accept; do not infer equivalence from a label.
CONFIRM-PER-SUPPLIER: Match every claim to the ordered SKU, variant, scope and current validity; a marketing image or marking alone is not controlled evidence.
Apply the smart lock procurement evidence ladder: The acceptance ladder behind ansi bhma a156 13 smart lock retrofit impact runs: marketing image → self-declared DoC → report from a sample test → third-party certificate with scope and number → certificate for the exact SKU/variant you are buying → audit trail proving the approval still stands after the sample passed
Use Reading an ANSI/BHMA A156.13 Test Report Page by Page: A Smart Lock Buyer Walkthrough to check identifiers and scope before accepting a report for the ordered configuration.
Clause C-05 — Keep adjacent scopes separate
Clause text: “Cite any radio, electrical, fire-door, egress or accessibility requirement separately from mortise-lock performance evidence.”
A156.13 cannot answer those questions. A fire door, accessible opening, powered accessory or access-control interface may require different published scope and project approval. Require a separate evidence package and do not treat an A156.13 report as coverage for it.
CONFIRM-WITH-LOCAL-AUTHORITY: Ask the project authority which adjacent standards and opening-specific approvals apply; treat each as a per-product and per-door question.
Clause C-06 — Gate approval through a controlled pilot
flowchart TD
A[Confirm existing lock family] --> B[Record door and strike geometry]
B --> C{Retain or change lock interface}
C -->|In place| D[Request SKU specific evidence]
C -->|Conversion| E[Approve site specific design]
D --> F[Run controlled pilot]
E --> F
F --> G[Verify installed record]
The ansi bhma a156 13 smart lock retrofit impact becomes measurable at handover: the installed configuration must match the approved door record and the evidence held for the ordered variant. During a pilot, record the SKU, retained and replaced parts, door identifier and installer change requests. A substitution or drilling change pauses acceptance until fit and evidence are reviewed.
| Gate | Pass condition | Hold trigger |
|---|---|---|
| Document gate | Bid classification and evidence map are complete | Missing document or scope mismatch |
| Fit gate | Survey and supplier fit response agree | Unrecorded preparation or unlisted component |
| Handover gate | Installed record matches the approved revision | Substitution, modification or unidentified variant |
Clause C-07 — Put the answer schedule in the RFQ
Require a response matrix with these ANSI/BHMA A156.13 retrofit requirements: standard edition proposed; exact model and variant; document supplied; scope and sample identifiers; door types named in the written fit statement; components retained or changed; and unresolved review items.
Use The the Mortise Lock Clause: How to Write It So a Supplier Can Respond for the RFQ structure, and adapt Ansi/bhma A156.13 in a Smart Lock Tender Pack: The Evidence Checklist for the evidence schedule. Require one answer per door type; a single unqualified “ANSI/BHMA A156.13” entry should be returned for clarification.
Clause C-08 — Record the qualification decision
Use three disposition labels: retrofit accepted on evidence; site-specific conversion accepted subject to listed approvals; or qualification held pending evidence. Attach the survey, bidder response, document identifiers, approved fit revision and deviation notes. Do not collapse them into a general “compliant” statement, because that hides which condition was met.
Send the completed door schedule and evidence matrix with the RFQ, and require each bidder to return fit assumptions, document references and unresolved items with its quotation. This creates a qualification record that can survive installation without turning a standards reference into blanket site approval.
Close the loop with requesting a quote.

